Features
■ Select models are compliant with
AEC-Q200 Rev-C Stress Test Qualifi cation
for Passive Components in Automotive
Applications (see chart below)
■ RoHS compliant*
■ ESD protection >25 kV
■ Low capacitance <0.05 pF
■ Low leakage current <5 nA
Applications
■ HDMI 1.4
■ Digital Visual Interface (DVI)
■ USB 3.0 / USB OTG
■ Memory protection
■ SIM card ports
■ Automotive
ChipGuard® MLU Series - ESD Protectors
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
Device SymbolGeneral Information
Electrical Characteristics @ 25 °C (unless otherwise noted)
CG0402MLU / CG0603MLU (Note 3)
Parameter Symbol 3.3x 05x 12x 24x Unit
Typical Continuous Operating Voltage VDC 3.3 5 12 24 V
Typical Clamping Voltage (Note 1) VC 25 V
Maximum Capacitance @ 1 VRMS 1 MHz CO 0.05 pF
Maximum Leakage Current @ Max. VDC IL 5 nA
Typical Trigger Voltage (Note 2) VT 250 V
Maximum ResponseTime RT 1 ns
ESD Protection: Per IEC 61000-4-2
Min. Contact Discharge (>1000 Reps) ±8 kV
Min. Air Discharge (>1000 Reps) ±15 kV
Operating Temperature TOPR -40 to +125 ˚C
Storage Temperature TSTG -55 to +150 ˚C
The ChipGuard® MLU Series has been
specifi cally designed to protect sensitive
electronic components from electrostatic
discharge damage. The MLU family has
been designed to protect equipment to
IEC61000-4-2, Level 4 (±8 kV Contact /
±15 kV Air Discharge) ESD specifi cations
targeted for high speed USB 3.0/USB
OTG, HDMI 1.4, DVI or IEEE1394
applications.
The ChipGuard® MLU Series has been
manufactured to provide low 0.05 pF
capacitance and leakage currents less than
5 nA with excellent clamp qualities, making
the family almost transparent under normal
working conditions.
V
Notes: 1. Per IEC 61000-4-2, Level 4 8 kV Contact Discharge. Measurement 30 ns after initiation of pulse.
2. Per IEC 61000-4-2, Level 4 8 kV Contact Discharge. Measurement at maximum pulse voltage.
3. Part number suffi x “x” can be E for 0603 size or G for 0402 size to indicate tape & reel quantity.
*RoHS COMPLIANT
AEC APPROVED (Select Models)
AEC Approved Models
Model AEC-Q200
CG0402MLU-05G ✓ Yes
CG0402MLU-12G ✓ Yes
CG0402MLU-24G ✓ Yes
CG0603MLU-05E ✓ Yes
CG0603MLU-24E ✓ Yes
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
ChipGuard® MLU Series - ESD Protectors
Product Dimensions
CG0402 CG0603
Dimension Series Series
L 1.00 ± 0.15 1.60 ± 0.20
(0.04 ± 0.006) (0.064 ± 0.008)
W 0.50 ± 0.10 0.80 ± 0.20
(0.02 ± 0.004) (0.032 ± 0.008)
A 0.36 ± 0.05 0.45 ± 0.10
(0.014 ± 0.002) (0.018 ± 0.004)
B 0.25 ± 0.15 0.30 ± 0.20
(0.10 ± 0.006) (0.012 ± 0.008)
DIMENSIONS: MM
(INCHES)
Recommended Pad Layout
L
W
B
A
A
CB
D
CG0402 CG0603
Dim. Series Series
A 0.51 0.76
(0.020) (0.030)
B 0.61 1.02
(0.024) (0.040)
C 0.51 0.50
(0.020) (0.020)
D 1.70 2.54
(0.067) (0.100)
Solder Refl ow Recommendations
110 sec. (min.)
300
250
200
150
100
50
0
30-70
sec.
Temperature (°C)
120 sec. (min.)
Preheat Stages 1-3 Soldering Cooling
Time (seconds)
• This product can be damaged by rapid heating, cooling or localized heating.
• Heat shocks should be avoided. Preheating and gradual cooling recommended.
• Excessive solder can damage the device. Print solder thickness of 150 to 200 um recommended.
• Solder gun tip temperature should be kept below 280 °C and should not touch the device directly. Contact should be less than 3 seconds.
A solder gun under 30 watts is recommended.
A Stage 1 Preheat Ambient to Preheating 30 s to 60 s
Temperature
B Stage 2 Preheat 140 °C to 160 °C 60 s to 120 s
C Stage 3 Preheat Preheat to 200 °C 20 s to 40 s
D Main Heating 200 °C 60 s to 70 s
210 °C 55 s to 65 s
220 °C 50 s to 60 s
230 °C 40 s to 50 s
240 °C 30 s to 40 s
E Cooling 200 °C to 100 °C 1 °C/s to 4 °C/s
Specifi cations are subject to change without notice.
Customers should verify actual device performance in their specifi c applications.
ChipGuard® MLU Series - ESD Protectors
Packaging Dimensions
TOP
TAPE
NOTES: TAPE MATERIAL IS PAPER.
COVER TAPE ADHESION IS 40 ± 15 GRAMS.
TAPE THICKNESS IS
4.00 ± 0.10
(0.16 ± 0.004)
DG
8.00 ± 0.30
(0.32 ± 0.012)
0.60 ± 0.05
(0.024 ± 0.002)
3.50 ± 0.05
(0.14 ± 0.002)
C
L
W
1.50 ± 0.10
(0.06 ± 0.004) 2.0 ± 0.50
(0.08 ± 0.02)
180.8 ± 2.0
(7.12 ± 0.08)
9.0 ± 0.50
(0.36 ± 0.02)
13.0 ± 1.0
(0.52 ± 0.04)
13.0 ± 0.50
(0.52 ± 0.02)
62.0 ± 1.50
(2.48 ± 0.06)
21.0 ± 0.80
(0.84 ± 0.032)
DIMENSIONS: MM
(INCHES)
CG0402 CG0603
Dimension Series Series
C 1.75 ± 0.05 1.75 ± 0.10
(0.04 ± 0.002) (0.04 ± 0.004)
D 2.00 ± 0.02 2.00 ± 0.05
(0.08 ± 0.0008) (0.08 ± 0.002)
L 1.12 ± 0.03 1.80 ± 0.20
(0.045 ± 0.0012) (0.072 ± 0.008)
W 0.62 ± 0.03 0.90 ± 0.20
(0.025 ± 0.0012) (0.036 ± 0.008)
G 2.0 ± 0.05 4.0 ± 0.05
(0.08 ± 0.002) (0.16 ± 0.002)
How to Order
CG 0402 MLU - 12 G
ChipGuard®
Product Designator
Package Option
0402 = 0402 Package
0603 = 0603 Package
Multilayer Series Designator
Operating Voltage
3.3 = 3.3 V
05 = 5 V
12 = 12 V
24 = 24 V
Tape & Reel Packaging
E = 5,000 pcs. per reel (0603 Package)
G = 10,000 pcs. per reel (0402 Package)
REV. I 02/27/12
Asia-Pacifi c: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116
Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510
The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700
www.bourns.com
