G200 www.vishay.com Vishay Draloric Axial Vitreous Wirewound Resistors FEATURES * Complete welded construction * Vitreous coating * Enhanced humidity protection * TCR 100 ppm/K to 180 ppm/K * CECC 40201-801 approved version available * Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes * Material categorization: For definitions please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS SIZE POWER RATING W P40 C LIMITING VOLTAGE V RESISTANCE RANGE (1) TCR = 100 ppm/K to 180 ppm/K TOLERANCE (2) % G202 G220414 4 200 0.10 to 10K 10, 5, 2 G204 G240719 7 350 0.10 to 39K 10, 5, 2 G206 G260933 13 500 0.15 to 68K 10, 5, 2 G207 G270947 17 650 0.20 to 120K 10, 5, 2 MODEL Notes (1) Resistance value to be selected for 10 % tolerance from E12 and for 5 % from E24 (2) 1 % on request PART NUMBER AND PRODUCT DESCRIPTION Part Number: G24071933902J4B000 G 2 MODEL 4 0 TCR/MATERIAL G220414 = G202 G240719 = G204 G260933 = G206 G270947 = G207 3 = Class 3 WM 110 100 to 180 ppm/K 7 1 9 VALUE 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 3 3 9 0 2 J TOLERANCE CODE PACKAGING CODE F = 1.0 % G = 2.0 % J = 5.0 % K = 10.0 % (3) 4 B 0 0 0 SPECIAL The 5 digit BV number will be encoded using a 36 character code. This code contains numbers 0...9 and letters A...Z (36 characters total) and allows to encode at least 46 655 five digit BV numbers. 000 = Standard Product Description: G204 39K 5 % AB G73 G204 39K 5% AB G73 MODEL VALUE TOLERANCE CODE PACKAGING DESCRIPTION (3) Note (3) See "Packaging Table" Revision: 03-Aug-12 Document Number: 21002 1 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 G200 www.vishay.com Vishay Draloric ELECTRICAL SPECIFICATIONS FOR PARTS QUALIFIED ACCORDING TO CECC 40201-801 MODEL STYLE ACC. TO CECC40201-801 POWER RATING W P25 C POWER RATING W P40 C LIMITING VOLTAGE V RESISTANCE RANGE (1) TCR = 100 ppm/K to 180 ppm/K TOLERANCE (2) % FDG 3.5 3.0 100 0.10 to 10K 5, 2 0.10 to 39K 5 0.10 to 22K 2 0.15 to 68K 5 0.15 to 33K 2 G202 G204 FDK 6.5 5.5 200 G206 FDP 11.5 10 350 PART NUMBER AND PRODUCT DESCRIPTION FOR CECC 40201-801 QUALIFIED PART Part Number: FDPCEE031809JLA000 F D P C E E 0 MODEL TCR/MATERIAL VALUE FDGCEE0 = G202 FDKCEE0 = G204 FDPCEE0 = G206 3 = Class 3 WM 110 100 to 180 ppm/K 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 3 1 8 0 9 J L A 0 0 TOLERANCE CODE PACKAGING CODE F = 1.0 % G = 2.0 % J = 5.0 % K = 10.0 % 4C = Ammopack tape 73 mm, 500 pcs 7B = Ammopack tape 88 mm, 250 pcs LA = Loose, 100 pcs 4A = Ammopack tape 73 mm, 100 pcs F1 = Reel tape 73 mm, 1000 pcs 0 SPECIAL 000 = Standard Product Description: G206 18R 5 % LA CECC 40201-801 G206 18R 5% LA CECC 40201-801 MODEL VALUE TOLERANCE CODE PACKAGING DESCRIPTION VARIANT PACKAGING TABLE MODEL G202 G204 TAPE/LEAD LENGTH PCS (mm) AMMO PACK REEL LOOSE PACKAGING CODE PACKAGING DESCRIPTION PCS PACKAGING CODE PACKAGING DESCRIPTION D1 R1 G53 53 500 2C AC G53 1000 73 500 4C AC G73 1000 F1 R1 G73 73 250 4B AB G73 500 FC RC G73 500 IC RC G88 88 98 250 7B AB G88 250 8B AB G88 CL PCS PACKAGING CODE PACKAGING DESCRIPTION 50 LD LD 200 LJ LJ G206 107 100 LA LA G207 120 100 LA LA Revision: 03-Aug-12 Document Number: 21002 2 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 G200 www.vishay.com Vishay Draloric DIMENSIONS D1 D B A C For packaging dimensions see separate packaging dimensions page. DIMENSIONS in millimeters [inches] MODEL MASS (g) Amax. Bmax.(1) C (2) D G202 13 [0.512] 5.7 [0.224] 0.8 [0.031] 53 1 [2.087 0.039] G204 19.3 [0.760] 8.5 [0.335] 0.8 [0.031] 73 1 [2.874 0.039] G206 32.3 [1.272] 9.8 [0.386] 0.8 [0.031] 107 2 [4.213 0.079] 6.5 G207 49.3 [1.941] 10.5 [0.413] 0.8 [0.031] 120 2 [4.724 0.079] 10 D1 1 2.2 Notes (1) The body diameter should be increased by 1 mm [0.039"] for ohmic values 10 (2) C according to IEC 60301 RATED POWER IN % DERATING 120 100 80 60 40 20 0 - 50 50 - 55 40 350 TEMPERATURE RISE 500 G202 400 300 200 100 0 250 AMBIENT TEMPERATURE IN C TEMPERATURE RISE IN K TEMPERATURE RISE IN K TEMPERATURE RISE 150 500 400 300 G204 200 100 0 1 Revision: 03-Aug-12 2 3 4 5 POWER IN W 0 0 2 4 6 8 10 POWER IN W Document Number: 21002 3 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 G200 www.vishay.com Vishay Draloric TEMPERATURE RISE 500 TEMPERATURE RISE IN K TEMPERATURE RISE IN K TEMPERATURE RISE 400 G206 300 200 100 0 500 400 300 G207 200 100 0 4 8 12 0 16 20 POWER IN W 0 5 10 15 20 POWER IN W TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST REQUIREMENTS PERMISSIBLE CHANGE (R) PROCEDURE V-block-method; U = Uins; 60 s Model 4.7 - 4.8.4.2 - Voltage proof Uins (V) G202/FDG 300 G204/FDK 400 G206/FDP 500 G207 650 Temperature coefficient At (20/- 55/20) C and (20/200/20) C No flashover or breakdown 100 ppm/K to 180 ppm/K Overload voltage = 10 x rated voltage Model 4.13 - 21 (Ua1) 21 (Ub) 21 (Uc) 4.16 Short time overload Robustness of terminations G202/FDG Duration (s) 5 G204/FDK 6 G206/FDP 10 G207 10 Tensile, bending and torsion Solder bath method; SnPb40; non-activated flux (235 5) C; (2 0.2) s (1.0 % R + 0.05 ) no visible damage (1.0 % R + 0.05 ), no visible damage Good tinning (95 % covered, no visible damage) 4.17.2 20 (Ta) Solderability 4.18.2 20 (Tb, Method 1A) Resistance to soldering heat Unmounted components; (260 3) C; (10 1) s (1.0 % R + 0.05 ), no visible damage 14 (Na) Rapid change of temperature 30 min at LCT = - 55 C 30 min at UCT = 200 C 5 cycles (1.0 % R + 0.05 ), no visible damage Shock Acceleration: 981 m/s2 Pulse Duration: 11 ms Wave Form: Half sine 3 successive shocks to be applied in each perpendicular direction (1.0 % R + 0.05), no visible damage 4.19 4.21 Revision: 03-Aug-12 27 (Ea) Solder bath method; SnAg3Cu0.5; non-activated flux; (245 5) C; (3 0.3) s Document Number: 21002 4 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 G200 www.vishay.com Vishay Draloric TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) 6 (B4) Vibration 6 h; 10 Hz to 2000 Hz 1.5 mm or 196 m/s2 (1.0 % R + 0.05 ), no visible damage 4.22 (5.0 % R + 0.05 ) 4.23 4.23.2 2 (Ba) Dry heat 200 C; 16 h 4.23.3 30 (Db) Damp heat, cyclic 55 C; 24 h; 90 % to 100 % RH; 1 cycle 4.23.4 1 (Aa) 4.23.5 13 (M) Low air pressure; 1.0 kPa; 2 h; 15 C to 35 C 4.23.6 30 (Db) Damp heat, cyclic 55 C; 5 days; 95 % to 100 % RH; 5 cycles 4.25.2 4.25.3 4.24 Revision: 03-Aug-12 - Climatic sequence Endurance at RT C Cold - 55 C; 2 h PRT, 1000 h (PRT = P25 for CECC qualified model and P40 for commercial model) U = 1.5 h on; 0.5 h off (5.0 % R + 0.05 ) PRT, 8000 h (8.0 % R + 0.05 ) (5.0 % R + 0.05 ) (5.0 % R + 0.05 ) - Endurance at upper category temperature UCT = 200 C acc. to CECC40201-801; load 54 % P70; 1000 h U = 1.5 h on; 0.5 h off 78 (Cab) Damp heat, steady state (40 2) C; 56 days; (93 3) % RH Document Number: 21002 5 For technical questions, contact: ww1resistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000