MODEL
FREQUENCY
RANGE POWER
(dBm) FLATNESS
(dB)
NW100M-MI 1 MHz - 100 MHz +13 +/- 1.0
NW300M-MI 1 MHz - 300 MHz +10 +/- 1.0
NW500M-MI 1 MHz - 500 MHz +10 +/- 1.5
NW1G-MI 1 MHz - 1 GHz +10 +/- 2.0
NW1.5G-MI 1 MHz - 1.5 GHz +10 +/- 2.0
NW2G-MI 1 MHz - 2 GHz 0 +/- 2.0
NW3G-MI 10 MHz - 3 GHz 0 +/- 2.5
NW4G-MI 10 MHz - 4 GHz -10 +/- 2.5
NW6G-MI 10 MHz - 6 GHz -10 +/- 2.5
NW18G-MI 2 GHz - 18 GHz -14 +/- 2.5
High Power
NW2.7G-HP-MI 10 MHz - 2.7 GHz +30 +/- 2.5
The NW-MI series is an economical and rugged manual noise instrument suitable for
many applications. Applications for this instrument include system and component
wireless testing, signal simulation, HDTV and CATV testing as well as use as a general
purpose test source and as an economical source for bit error r ate testing.
The unit is supplied in a half rack case and comes with a front panel rotary attenuator to
vary the output level.
Specifications:
Output: White Gaussian Noise
Impedance: 50 Ohms
Connector: Sma (f)
Noise Attenuator: 10 dB overall in 1 dB steps,
models above 2 GHz are 9 dB overall in 1 dB steps
AC Power: Standard line voltages
Operating temperature: -20 to +75 deg C
Options include a combiner to allow the user to inject a signal to be added to the noise,
various connectors and noise attenuators. Other output levels and frequency ranges are
also available, please contact NoiseWave to discuss your needs.
NW-MI SERIES
11 Melanie Lane, Unit 3
East Hanover, NJ 07936
Phone: 973-386-1119
Fax: 973-386-1131
E-mail: info@noisewave.com
Website: http://www.noisewave.com
Rev: B
OPTIONS
C: Combiner for input signal
N: N (f) connector
BNC: BNC(f) connector
75: 75 Ohm impedance
100: Replace 1 dB/ step with 10 dB/step 100 dB overall attenuator *
110: Add a 10 dB/ step attenuator for 110 dB attenuation in 1 dB steps**
2U: table top unit
* For models above 2 GHz, use option 60:
60: Replace 1 dB/ step with 10 dB/ step 60 dB overall attenuator
** For models above 2 GHz, use option 69:
69: Add 10 dB/ step attenuator to 69 dB overall attenuation in 1 dB steps
