TBF32-13PS - ITT INTERCONNECT SOLUTIONS

A-72 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

ITT Cannon is the foremost manufac-

turer of MS and MS type connectors

with the widest range of connector

styles, sizes and variations in the

industry. These connectors utilize the

finest materials, which, along with

precision manufacturing and rigid

quality control, assure ITT Cannon

customers of the finest quality con-

nectors. The MS A & B product line

has environmentally safe green and

black zinc alloy plating. The Black

zinc plating is RoHS complaint. The

plating is a high quality, uniform fin-

ish. The contact, which are preloaded

in the insulator, have been

redesigned such that the solder cups

remain in the proper orientation and

will not rotate during wiring termina-

tion. The contacts are machined for

strength and durability and plated

with silver. The Cannon MS A&B

design meets the performance

requirements of the MIL-C-5015. The

product is available in all the popular

sizes and configurations available in

Class A (solid end bell) and Class B

(split end bell) versions.

Applications:

• Industrial Controls

• Test Equipment

• Traffic Signals

• Bus Systems

• High strength aluminum alloy connector

• High strength plastic insulators

• Environmentally safe shell finishes

• Protected against corrosion

• High quality plating finish

• Threaded coupling

• Product is tooled and available in 50 insert patterns

• Machined contacts

• Low cost

• UL recognized

Temperature Range: –55°C to 125°C (-67°F to 257°F)

Current Rating: 13 A to 150 A*

Durability: 500 mating cycles min.

Wire Accommodation: 0 to 20 AWG*

No. of Contacts: 2 to 48

Termination: Solder

*Depending on contact size.

hsiniFlairetaMnoitpircseD

Green Zinc Standard, Black Zinc (RoHS), OD CADyollA munimulAllehS

—citsalP draHrotalusnI

revliSyollA reppoC ro ssarBtcatnoC

ELECTRICAL SERVICE DATA

Test current ratings of contacts and

allowable voltage drop under test con-

ditions when assembled as in service

are shown below. Maximum total cur-

rent to be carried per connector is the

same as the allowable in wire bundles

as specified in MIL-W-5088.

Contact Test Current Potential Drop

Size (amps) (millivolts)

16 13 49

12 23 42

846 28

480 23

0 150 21

HIGH POTENTIAL TEST VOLTAGE

MS connectors show no evidence of breakdown with the test voltage given

below is applied between the two closest contacts and between the shell and

the contacts closest to the shell for a period of one minute.

Test Air Creepage

MS Voltage Suggested* Spacing Distance

Service (RMS) Operating Voltages Nom. Nom.

Rating 60 cps DC AC (rms) (inches) (inches)

Inst. 1000 250 200 1/16

A 2000 700 500 1/16 1/8

D 2800 1250 900 1/8 3/16

E 3500 1750 1250 3/16 1/4

B 4500 2450 1750 1/4 5/16

C 7000 4200 3000 5/16 1

*As indicated in previous MS Specification and to be used by designer only as a guide.

CA/MS A&B

Product Features and Benefits

Performance Specifications

Materials and Finishes

ca_A1-A163.qxd:Layout 1 2/9/11 7:49 PM Page 72

A-73

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

CA/MS 3100A wall mounting recepta-

cles are used to carry wires through

walls or bulkheads, or to provide the

means of disconnection at a bulk-

head. CA/MS 3100A receptacles mate

with CA/MS 3106 and 3108 plugs.

CA/MS 3101A cable connecting

receptacles are used for cable

extension requirements where

mounting provisions are unnecessary.

CA/MS 3101A plugs mate with

3106A/B and 3108B connectors.

Note: The D revision of MIL-C-5015

has changed the nomenclature of the

3101 from receptacle to plugs.

CA/MS 3102A box mounted recepta-

cles are used in junction boxes or as

an integral part of equipment. CA/MS

3102A receptacles will mate with

3106 and 3108 plugs.

CA/MS 3106A straight plug utilizes a

solid endbell. The CA/MS 3106A

mates with 3100, 3101, and 3102

connectors

CA/MS 3106B is identical to the

3106A straight plug except it utilizes

a split endbell. CA/MS 3106B mates

with 3100, 3101, and 3102 connec-

tors.

CA/MS 3108B 90° angle plugs are

used where there is limited space ad

where wires must be brought at

abrupt angles. This plug will mate

with 3100, 3101, and 3102 connec-

tors.

MS A&B

Introduction

ca_A1-A163.qxd:Layout 1 2/9/11 7:49 PM Page 73

A-74 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

How to Order

SERIES PREFIX

MS – Complies with Military

Specification MIL-C-5015

CA – Cannon prefix

CAR – RoHS Compliant (Black Zinc Only)

SHELL STYLE

3100 – Wall Mounting Receptacle

(A version only)

3101 – Cable Connector Receptacle

(A version only)

3102 – Box Mounting Receptacle

3106 – Straight Plug

3108 – 90° Angle Plug

(B version only)

CLASS

A – Solid or one-piece endbell

B – Split or two-piece endbell

SHELL SIZE

Coupling thread diameter in

sixteenths of an inch

CONTACT ARRANGEMENTS

Refer to page B-5

CONTACT TYPE

P – Pin

S – Socket

ALTERNATE INSERT POSITIONS

Refer to page 4

MODIFICATIONS

A206 (RoHS) Black Zinc Plating

Contact Cannon for other options.

For more information, please

contact your local Cannon sales ofﬁce.

CA/MS A&B

ca_A1-A163.qxd:Layout 1 2/9/11 7:49 PM Page 74

A-75

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

* 10SL is available in the following configurations only: 3100, 3101, 3102,

pin contacts only and 3106 and 3108 socket contacts only

CA/MS A&B

Contact Cavity Arrangements

10SL-3 10SL-4 12S-3 14S-1 14S-2 14S-5 14S-6 14S-7 14S-9 16-9 16-10 16-11

A

Service

Rating

AAA A A AA AInst. Inst. Inst.

A A A (B,C,F,G)

Inst. (all others)

D Inst. A A ADA

ADD D A A A AA (C-F)

D (A,B,G,F)

DAA D A D

D (H)

A (all others) A

D (G)

A (all others)

AA AA A

Inst.

AA A A

3 - #16 2 - #16 2 - #16 3 - #16 4 - #16 5 - #16 6 - #16 3 - #16 2 - #16 2 - #16 (B, D) 3 - #12 2 - #12

2 - #12 (A, C)

16S-1 16S-8 18-1 18-4 18-5 18-8 18-9 18-10 18-11 18-12

7 - #16 5 - #16 10 - #16 4 - #16 1 - #16 (A) 7 - #16 (A-G) 5 - #16 (B, C, E-G) 4 - #12 5 - #12 6 - #16

2 - #12 (B, C) 1 - #12 (H) 2 - #12 (A, D)

18-20 18-22 20-3 20-4 20-7 20-19 20-27 20-29 20-33

5 - #16 3 - #16 3 - #12 4 - #12 8 - #16 3 - #8 14 - #16 17 - #16 11 - #16

22-2 22-14 22-19 22-23 22-28 24-2 24-10 24-20

3 - #8 19 - #16 14 - #16 8 - #12 7 - #12 7 - #12 7 - #8 9 - #16 (A-D, G-L)

2 - #12 (E, F)

24-28 28-10 28-11 28-12 28-15 28-16 28-21

24 - #16 3 - #12 (A, F, G) 18 - #16 (A-I, N-X) 26 - #16 35 - #16 20 - #16 37 - #16

2 - #8 (B, E) 4 - #12 (J-M)

2 - #4 (C, D)

01-638-637-635-63

61# - 84)z-Z ,X-A( 61# - 64)s-a ,Z-A( 61# - 040# - 4

)Y( 21# - 1)z-t( 21# - 7

**

ca_A1-A163.qxd:Layout 1 2/9/11 7:49 PM Page 75

A-76 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MS3100A CA/CAR 3100A

CA/MS A&B

Wall Mounting Receptacle - Solid Endbell

ITT CANNON

HARDWARE

KIT NO.

(BLACK ZINC)

ITT CANNON

HARDWARE

KIT NO.

(GREEN ZINC)

*

* 10SL is available in the following configurations only: 3100, 3101, 3102,

pin contacts only and 3106 and 3108 socket contacts only

ca_A1-A163.qxd:Layout 1 2/9/11 7:49 PM Page 76

A-77

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MS3101A CA/CAR 3101A

CA/MS A&B

Cable Connecting Receptacle - Solid Endbell

* 10SL is available in the following configurations only: 3100, 3101, 3102,

pin contacts only and 3106 and 3108 socket contacts only

ITT CANNON

HARDWARE

KIT NO.

(BLACK ZINC)

ITT CANNON

HARDWARE

KIT NO.

(GREEN ZINC)

*

ca_A1-A163.qxd:Layout 1 2/9/11 7:49 PM Page 77

A-78 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

CA/MS A&B

Box Mounting Receptacle

ITT CANNON

HARDWARE

KIT NO.

(BLACK ZINC)

ITT CANNON

HARDWARE

KIT NO.

(GREEN ZINC)

MS3102A CA/CAR 3102A

*

* 10SL is available in the following configurations only: 3100, 3101, 3102,

pin contacts only and 3106 and 3108 socket contacts only

ca_A1-A163.qxd:Layout 1 2/9/11 7:49 PM Page 78

A-79

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

CA/MS A&B

Straight Plug - Solid Endbell

ITT CANNON

HARDWARE

KIT NO.

(BLACK ZINC)

ITT CANNON

HARDWARE

KIT NO.

(GREEN ZINC)

MS3106A CA/CAR 3106A

*

* 10SL is available in the following configurations only: 3100, 3101, 3102,

pin contacts only and 3106 and 3108 socket contacts only

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 79

A-80 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

CA/MS A&B

Straight Plug - Split Endbell

ITT CANNON

HARDWARE

KIT NO.

(BLACK ZINC)

ITT CANNON

HARDWARE

KIT NO.

(GREEN ZINC)

MS3106B CA/CAR 3106B

*

* 10SL is available in the following configurations only: 3100, 3101, 3102,

pin contacts only and 3106 and 3108 socket contacts only

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 80

A-81

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

A

CA/MS A&B

90° Angle Plug - Split Endbell

ITT CANNON

HARDWARE

KIT NO.

(BLACK ZINC)

ITT CANNON

HARDWARE

KIT NO.

(GREEN ZINC)

MS3108B CA/CAR 3108B

*

* 10SL is available in the following configurations only: 3100, 3101, 3102,

pin contacts only and 3106 and 3108 socket contacts only

Circular

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 81

A-82 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

Cable clamps are available in both the

environmentally safe green zinc and

black zinc, and will accommodate

shell sizes 10SL-36. Double clamping

action provides a balanced, positive

hold on the wires and greatly reduces

moisture transmission, a real benefit

in applications that require environ-

mental sealing. This clamp is provided

with the bushing.

For more information on protective caps contact

Interconnect Solutions Sales Offices.

Shell Size Part Number

Green Zinc

Part Number

Black Zinc

RoHS compliant

10SL, 12S CA17711-111 CA17711-103

14S CA17711-112 CA17711-104

16S, 16 CA17711-113 CA17711-101

18 CA17711-114 CA17711-102

20, 22 CA17711-115 CA17711-22

24, 28 CA17711-116 CA17711-105

32 CA17711-117 CA17711-106

36 CA17711-118 CA17711-107

Size

A L

Z

Green Zinc Black Zinc

RoHS

compliant Cadmium

4A

.811

(20.60) .811

(20.60)

5/8-24INEF-2B

995-0002-558 995-0002-280 995-0002-550

6A

.969

(24.60) .969

(24.60)

3/4-20UNEF-2B

995-0002-559 995-0002-281 995-0002-551

8A

1.094

(27.80) 1.094

(27.80)

7/8-20UNEF-2B

995-0002-560 995-0002-282 995-0002-552

10A

1.89

(30.20) 1.89

(30.20)

1-20UNEF-2B

995-0002-561 995-0002-283 995-0002-553

12A

1.378

(35.00) 1.378

(35.00)

13/16-18UNEF-2B

995-0002-562 995-0002-284 995-0002-554

16A

1.693

(43.00) 1.693

(43.00)

17/16-18UNEF-2B

995-0002-563 995-0002-285 995-0002-555

20A

2.031

(51.60) 2.031

(51.60)

1-3/4-18UNS-2B

995-0002-564 995-0002-286 995-0002-556

24A

2.220

(56.40) 2.220

(56.40)

2-18UNS-2B

995-0002-565 995-0002-287 995-0002-557

Accessories

Metal Protective Caps

CA/MS A&B

Alternate Insert Positions

Pin front view: Shell rotation

Contact

Arrangement W˚ X˚ Y˚ Z˚

14S-9 70 145 215 290

16-9 35 110 250 325

16-10 90 180 270 —

16-11 35 110 250 325

16S-1 80 — — 280

16S-8 — 170 265 —

18-1 70 145 215 290

18-4 35 110 250 325

18-5 80 110 250 280

18-8 70 — — 290

18-9 80 110 250 280

18-10 — 120 240 —

18-11 — 170 265 —

18-12 80 — — 280

18-20 90 180 270 —

18-22 70 145 215 290

20-3 70 145 215 290

20-4 45 110 250 —

20-7 80 110 250 280

20-19 90 180 270 —

20-27 35 110 250 325

Contact

Arrangement W˚ X˚ Y˚ Z˚

20-29 80 — — 280

20-33 35 110 256 325

22-2 70 145 215 290

22-14 80 — — 280

22-19 80 110 250 280

22-23 35 — 250 —

22-28 80 — — 280

24-2 80 — — 280

24-10 80 — — 280

24-20 80 110 250 280

24-28 80 110 250 280

28-10 80 110 250 280

28-11 80 110 250 280

28-12 90 180 270 —

28-15 80 110 250 280

28-16 80 110 250 280

28-21 80 110 250 280

36-5 — 120 240 —

36-7 80 110 250 280

36-8 80 110 250 280

36-10 80 125 235 280

Contact

Arrangement W˚ X˚ Y˚ Z˚

10SL-3 — — — —

10SL-4 — — — —

12S-3 70 145 215 290

14S-1 — — — —

14S-2 — 120 240 —

14S-5 — 110 — —

14S-6 — — — —

14S-7 90 180 270 —

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 82

A-83

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MS-E/F/R/ER

MIL-C-5015 Connectors

How to Order

ITT Cannon is the foremost manufacturer of MS and

MS type connectors with the widest range of connec-

tor styles, sizes and variations in the industry. These

connectors utilize the finest materials, which, along

with precision manufacturing and rigid quality con-

trol, assure ITT Cannon customers of the finest qual-

ity connectors.

These circular connectors were originally designed

for aircraft, but are now widely used in many other

fields. They are particularly suitable for commercial

applications requiring low cost and high reliability.

ENVIRONMENTAL RESISTANT MS-E, MS-F, MS-R,

AND F80 (Solder/Crimp Termination)

MS-E, MS-F and MS-R are similar to MS-A and MS-B

connectors but have resilient insulators and wire

sealing grommets for extreme environmental condi-

tions and high altitude sealing. MS-E’s and MS-F’s

have a mechanical cable clamp; the MS-R has a

shorter, lighter weight endbell without the cable

clamp. Both the MS-F and MS-R have O rings to sup-

plement the interfacial seal. Shells are aluminum

alloy. Contacts are silver plated copper alloy. The F80

modification (crimp contact termination) is available

in E, R, F and BFR styles with resilient insulators.

POTTING ER CONNEC-

TORS (Solder Contact

Termination)

These Lightweight pot-

ting connectors provide

resistance to salt water,

fuels, etc., and will with-

stand the effects of high

vibration. 3100 and 3106

connectors with plastic

potting cups and resilient inserts meet the requirements of

MS3103 and MS25183. Contacts are silver plated copper or

brass. ER insulators are resilient; shells are aluminum alloy.

A 90º plug (3108ER) is also available.

ACCESSORIES

Accessories to fit fit MS

connectors include

junction shells, protec-

tive caps, dummy or

stowage receptacles,

cable clamps, telescop-

ing bushings.

PREFIX

MS - Conforms to latest MIL-C-5015

revision.

CA - Cannon designation (for any

modification)

CAR - RoHS compliant

SHELL STYLE

3100 - Wall mounting receptacle

3101 - Cable connecting plug

3102 - Box mounting receptacle

3106 - Straight plug

3108 - 90º angle plug

CLASS

E - with resilient insulator and integral

clamp for cable strain relief

F - same as E, however style 3106 with

O-ring seal under the coupling nut

* When ordering MS3106F to the

Cannon part number, designate CA06R.

SHELL SIZE

10S, 12S, 14S, 16S, 16, 18, 20, 22, 24, 28, 32 and 36.

CONTACT ARRANGEMENTS

See pages A-85 to A-89

CONTACT TYPE

P - Pin

S - Socket

ALTERNATE INSERT POSITION

W, X, Y and Z (omit for “Normal), see page A-89

MODIFICATION CODE

A71 - Electroless Nickel Hardware, RoHS

A176 - Contacts hard gold over nickel, RoHS

A206 - Black zinc cobalt hardware, RoHS

F42 - Connector supplied without endbell, grommet and ferrule

F80 - Snap-in crimp contacts

F183 - Snap-in crimp contacts for metric conductors

DN - CA3106 (plug only), endbell for shrink boot adapter

A232 - Black zinc cobalt hardware,

RoHS European version

A233 - Green zinc cobalt hardware,

European version

In the latest revision of MIL-C-5015, a new

class of environment-resistant connectors

was added. This new class F connector super-

sedes the previous class E connector. The

MS3106F has an O ring under the coupling

nut. The class E will be available upon request

for existing programs, and upon ordering will

also bear the E nomenclature on the shell.

MS-F and MS-R connectors are designed to

operate in the extreme environmental condi-

tions of high altitude flight and must be com-

pletely sealed to withstand moisture, conden-

sation, vibration, corona and flashover

caused by high altitude environments. They

have resilient grommet with internal restric-

tions in the wire cavities which act as O rings

around the wires. This allows the wires to

slide thru the grommet with a minimum of

friction, yet when the ferrule is seated and

the endbell tightened it provides a perfect

wire seal thru a wide variety of wire diame-

ters. This seal at the rear, plus the interfacial

seal at the front, effects a completely environ-

ment-resistant assembly when the plug is

mated to and F or R receptacle. Sockets are of

the closed-entry type.

The temperature range for this connector is -

55ºC (67ºF) to +125º (+257ºF) and meets

the requirements of MIL-C-5015.

The F80 modification (crimp contact termina-

tion) is available in resilient insulators in the

E, R, F, and BFR styles, creating a large selec-

tion of insert assemblies and hardware.

Components are identical to the MS-5015

except that the contacts are modified for

crimp termination providing and inexpensive

crimp contact connector with the proven reli-

ability of and complete intermateability with

the MS-5015 series. Cable clamps have been

integrally designed with the endbell on MS-E

and MS-F connectors. Class R is without the

cable clamp.

PREFIX

SHELL STYLE

CLASS

SHELL SIZE

CONTACT ARRANGEMENT

CONTACT TYPE

ALTERNATE INSERT POSITION

MODIFICATION CODE

MS 3106 R 18 - 1 P W *

CA 3106 F 18 - 1 S - F80*

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 83

A-84 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015

MS-E/F/R

MATERIALS AND FINISHES

Shell Material Aluminum Alloy

Finish O.D. Chromate coating

over cadmium plating

Insulator Material Polychloroprene (resilient)

Contacts Material Brass or copper alloy

Finish Silver plate

Termination Tinned solder pot

Performance and Material Specifications

WIRING

For class E, F, and R connectors, satisfactory moisture sealing

will be obtained if AWG and MS wire sizes and insulation

outside diameters are governed by this table.

Contact Wire Size Insulation OD Limit

Size (MIL-W-5086) (inches)

16 16 thru 20 .064 (1.63) min. to .130 (3.30) max.

12 12 thru 14 .114 (2.90) min. to .170 (4.32) max.

8 8 thru 10 .164 (4.17) min. to .255 (6.48) max.

4 4 thru 6 .275 (6.98) min. to .370 (9.40) max.

0 0 thru 2 .415 (10.54) min to .550 (13.97)

max.

ELECTRICAL SERVICE DATA

Test current ratings of contacts and allowable voltage drop

under test conditions when assembled as in service are shown

below. Maximum total current to be carried per connector is the

same as the allowable in wire bundles as specified in MIL-W-

5088.

Contact Test Current Potential Drop

Size (amps) (millivolts)

16 13 49

12 23 42

846 26

480 23

0 150 21

THERMOCOUPLE CONTACTS

SIzes 12 and 16 contacts, machined from matching thermocouple lead wire alloys, can be supplied in ITT Cannon

connectors. These thermocouple contacts maintain continuity from thermal-sensor leads through a bulkhead of

other closures in temperature measuring applications.

These contacts for matching lead wires are detailed by the standards of the Instrument Society of America (ISA).

ISA Standards Material

J and Y Iron and constantan

K Chromel and alumel

T Copper and constantan

Since the thermocouple connector applications determines the soldering methods and materials to be used, ther-

mocouple contacts, identified by permanent markings, are normally supplied with untinned solder pots.

Thermocouple contacts are supplied only in connectors having resilient insulators.

HIGH POTENTIAL TEST VOLTAGE

MS connectors show no evidence of breakdown when the test voltage given below is applied between the two

closest contacts and between the shell and the contacts closest to the shell for a period of one minute.

Test Air Creepage

MS Voltage Suggested* Spacing Distance

Service (RMS) Operating Voltages Nom. Nom.

Rating 60 cps DC AC (rms) (inches) (inches)

Inst. 1000 250 200 1/16

A 2000 700 500 1/16 1/8

D 2800 1250 900 1/8 3/16

E 3500 1750 1250 3/16 1/4

B 4500 2450 1750 1/4 5/16

C 7000 4200 3000 5/16 1

*As indicated in previous MS specification and to be used by designer only as a guide.

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 84

A-85

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015

MS-E/F/R

Contact Arrangements (Face View Pin Insert)

LEGEND

Not MS Approved. ITT Cannon Proprietary (see ITT Cannon

designed alternative insert positions, page A-90

Shell Size

No. of Contacts

Service Rating

8S-1

1 #16

A

10S-2

1 #16

A

10SL-4

2 #16

A

10SL-3

3 #16

A

10SLA4

5 #20

A

12S-4

1 #16

D

12-5

1 #12

D

12S-3

2 #16

A

12SA10

4 #16

Inst.

14-3

1 #8

A

14S-9

2 #16

A

16-13

2 #12

(A-Iron

B-Constantan)

A

16S-4

2 #16

D

16-11

2 #12

A

16-12

1 #4

A

14S-6

6 #16

Inst.

14S-5

5 #16

Inst.

14S-2

4 #16

Inst.

14S-7

3 #16

A

14S-1

3 #16

A

16S-5

3 #16

A

16S-6

3 #16

A

16-10

3 #12

A

16-9

2 #16 (B,D)

2 #12 (A,C)

A

16S-8

5 #16

A

16S-1

7 #16

A

18-7

1 #8

B

18-3

2 #12

D

18-12

6 #16

A

18-11

5 #12

A

18-15

4 #12

(A, C-Iron;

B, D-Constantan)

A

18-13

3 #12 (B,C,C)

1 #8(A)

A

18-10

4 #12

A

18-4

4 #16

D

18-22

3 #16

D

18-5

1 #16(A)

2 #12(B,C)

D

18-9

5 #16(B,C,E-G)

2 #12(A,D)

Inst.

18-8

7 #16(A-G)

1 #12(H)

A

18-1

10 #16

A(B,C,F,G)

Inst. (all others)

18-19

10 #16

A

20-2

1 #0

D

20-23

2 #8

A

20-3

3 #12

D

20-19

3 #8

A

20-15

7 #12

A

20-22

3 #16(B,D,F)

3 #8(A,C,E)

A

20-17

1 #16(F)

5 #12(A-E)

A

20-8

4 #16(B,C,E,F)

2 #8(A,D)

Inst.

20-14

3 #12(C,D,E)

2 #8(A,B)

A

20A37

ITT Cannon pos.

#8 of 20-4

D

20-24

2 #16 (A,C)

2 #8 (B,D)

A

20-4

4 #12

D

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

High Volume Layouts - readily

available from Cannon Distributors

¢

¢¢¢¢

¢¢

¢¢¢

¢

¢¢¢

AA

A

AAAB

ABA

A

B

BB

B

A

AA

A

C

BBBBB

B

A

C

CC

C

CC

C

B

AA

A

C

D

DDD

DD

D

E

EFE

G

E

F

B

C

G

A

B

BC

A

D

E

EF

F

G

H

J

I

K

F

D

E

EFB

D

BC

B

BB

CC

D

E

B

AB

C

A

B

C

D

E

F

G

H

J

F

A

B

C

D

E

G

H

J

K

L

M

N

P

R

T

S

V

U

20A-48

19 #16

Inst.

20A-9

9 #12

D (J)

A (all others)

16-7

2 #16 (A, B)

1 #8 (C)

A

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 85

A-86 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MS-E/F/R/ER

MIL-C-5015 Connectors

Contact Arrangements (continued)

LEGEND

Shell Size

No. of Contacts

Service Rating

20-7

8 #16

A(C-F)

D(A,B,G,H)

20-16

7 #16(A-G)

2 #12(H,I)

A

20-18

6 #16(A,C-E,G,H)

3 #12(B,F,I)

A

20-33

11 #16

A

20-11

13 #16

Inst.

20-27

14 #16

A

20-29

17 #16

A

22-7

1 #0

E

22-12

3 #16(A,C,D)

2 #8(B,E)

D

22-22

4 #8

A

22-10

4 #16

E

22-4

2 #12(A,C)

2 #8(B,D)

A

22-9

3 #12

E

22-6

1 #16(B)

2 #8(A,C)

D

22-2

3 #8

D

22-11

2 #16

B

22-13

1 #16(E)

4 #12(A-D)

A(A-D), D(E)

22-5

4 #16(A,C,D,F)

2 #12(B,E)

D

22-15

1 #16(D)

5 #12(A-C,E,F)

A(A-C,E,F),E(D)

22-28

7 #12

A

22-18

8 #16

A(C-E)

D(all others)

22-23

8 #12

D(H)

A(all others)

22-17

8 #16(A-D,F-J)

1 #12(E)

D(A), A(all others)

22-20

9 #16

A

24-10

7 #8

A

24-2

7 #12

D

24-12

3 #12(B,D,E)

2 #4(A,C,)

A

24-22

4 #8

D

24-9

2 #4

A

22-14

19 #16

A

22-19

14 #16

A

22-27

8 #16(A-H)

1 #8(J)

D(J), A (all others)

24-27

7 #16

E

24-6

8 #12

D(A,G,H)

A(all others)

24-11

6 #12(A-C,G-I)

3 #8(D-F)

A

24-20

9 #16(A-D,G-L)

2 #12(E,F)

D

24-19

12 #16

6 #12(B-G)

A

24A24

12 #12

A

24-5

16 #16

A

24-7

14 #16(A-M,O)

2 #12(P,N)

A

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

¢

¢¢

A

AAAAAAA

A

B

BC

C

CC

C

CD

D

E

EEE

E

EEE

E

AAA

A

AAAA

A

AA

A

BB

B

BB

B

BBBBB

B

CC

CCCCC

C

CC

C

DD

D

DD

D

EE

E

FF

F

G

H

HH

JJ

K

LM

M

N

PP

R

S

T

U

V

L

K

J

E

F

FF

F

J

H

G

GG

G

H

I

J

K

L

M

N

NO

P

PSR

G

A

AA

A

AA

B

BBBB

B

BB

B

BBBBB

CC

CCCCCCC

C

CC

D

DDD

D

DD

D

DD

E

EE

E

F

GGG

HH

H

J

K

KK

L

M

NNNP

R

S

T

F

FF

GGG

H J J M

L

JK

H

Not MS Approved. ITT Cannon Proprietary (see ITT Cannon

designed alternative insert positions, page A-90 High Volume Layouts - readily

available from Cannon Distributors

¢

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 86

A-87

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015

MS-E/F/R

Contact Arrangements (continued)

LEGEND

Shell Size

No. of Contacts

Service Rating

24-28

24 #16

Inst.

28-7

2 #4

D

28-22

3 #16(D-F)

3 #4(A-C)

D

28-10

3 #12(A,F,G)

2 #8(B,E)

2 #4(C,D)

D(G), A(all others)

28-1

6 #12(A,B,D-F,H)

3 #8(C,J,G)

D(A,E,J)

A(all others)

28-19

6 #16(A-C,H,L,M)

4 #12(E,G,J,K)

A(C,E,G,J,K,L)

B(H,M),D(A,B)

28-12

26 #16

A

28-11

18 #16(A-I, N-X)

4 #12(J-M)

A

28-16

20 #16

A

28-17

15 #16

A(A-L), B(R)

D(M-P)

28-20

4 #16(K-N)

10 #12(A-J,P)

A

28-2

12 #16(A,L,N)

2 #12(M,P)

D

28-9

6 #16(A,H-M)

6 #12(B-G)

D

28-15

35 #16

A

For MIL equip

design, use 28-21

28-21

37 #16

A

28A51

43 #16

A

32-17

4 #4

D

32-1

3 #12(A,C,D)

2 #0(B,E)

E(A),D(all others)

32-15

2 #0(A,G)

6 #12(B,C,D,E,F,H)

D

32-9

12 #16(C-N)

2 #4(A,B)

D

36-4

3 #0

A(B,C),C(A)

32A10

54 #16

AA

32A47

47 #16

32-7

28 #16(A-N,W-Z,a-k)

7 #12(O-V)

Inst. (A,B,h,j)

A(all others)

32-8

24 #16(A-L,T-Z,a-e)

6 #12(M-S)

2 #8(O,R)

A

For new MIL equip.

design, use 32-7

32-6

16 #16(A-O,S)

2 #12(U,V)

3 #8(P,R,T)

2 #4(W,X)

A

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

*NOTE: Additional layouts are the same as shown but in unique alternate positioins. Please consult the factory.

¢

¢¢

A

B

CC

C

D

EE

E

F

G GHJ

KL MNP Q

RSTUV

WX Y Z

A

AAA

A

AAA

B

BB

B

BBB

C

CC

C

D

DDD

D

E

F

FF

F

G

H

HH

H

HH

H

J

II

J

JJ

J

I

J

K

L

LL

K

KKK

K

L

M

MM

M

N

P

PP

P

O

Q

R

S

T

U

V

VV

V

W

X

XX

Y

Z

a

b

c

d

e

efgh

jk

lm

A

AAA

AA

B

BB

C

D

DD

E

EE

F

FF

G

H

J

I

JGHJ

L

LL

K

KK

M

MM

N

NN

P

O

PP

R

RR

S

SS

T

TT

U

UU

V

VV

W

WW

X

Y

Z

a

b

c

abc

c

d

e

f

g

h

j

k

l

nprs

mn p qr

stuvw

xy

A

B

C

C D EFG

HJ

L

K

MN

l

mn p r s

tuvwy

m

Z

ab

d

A

Z

Y

XW

V

U

T

S

R

Q

P

N

G

F

E

D

C

B

M

L

K

J

H

e

d

AB

b

a

fm

k

jh

gn

tAC

rAA

pu

AH

AFAE

AD

v

AK

AL

AJ

AQAPAN

AM

AS AT

AR

AW

AV

AU

F

A

B

C

D

E

G

H

JK

L

M

N

P

Q

R

T

S

ZYX

W

V

U

b

d

a

c

28A-63

9 #12

19 #16

A (e)

Inst. (all others)

28A-16

5 #16 (A, D-F, J)

4 #4 (B, C, G, H)

A (e)

Inst. (all others)

32A-69

41 #20

20 #16

Inst.

A

B

32-5

2#0

D

Not MS Approved. ITT Cannon Proprietary (see ITT Cannon

designed alternative insert positions, page A-90 High Volume Layouts - readily

available from Cannon Distributors

¢

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 87

A-88 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MS-E/F/R/ER

MIL-C-5015 Connectors

Contact Arrangements (continued)

Shell Size

No. of Contacts

Service Rating

36-5

4 #0

A

36-6

4 #4(B,C,E,F)

2 #0(A,D)

A

36-14

6 #16(K-N,P,Q)

5 #12(B,D,F,H,J)

5 #8(A,C,E,G,I)

D

36A16

18 #12

(B,C,V,J,K,M,N,

R, T-Iron; A,D-F,H,L

P,S,U-Constantan)

A

36A46

27 #12

A

36-9

14 #16(A-G,Z-f)

14 #12(H-N,S-Y)

2 #8(O,R)

1 #4(P)

A

36A66

52 #16(A-c,h-AK)

4 #12(d,e,f,g)

A

36A34

52 #16

A

36-10

48 #16

A

36-8

46 #16(A-X,Z-z

1 #12(Y)

A

36-7

40 #16(A-Z,a-s)

7 #12(t-z)

A

36-15

35 #16

D(m), A (all others)

40A33

7 #8(G-N)

6 #4(A-F)

A

40-10

16 #16(A,B,E-H,M,N,P

Q,V-Y,b,c)

9 #8(C,D,I,L,O,R,U,Z,a)

4 #4(K,J,S,T)

A

40A27

60 #16

A

40-56

85 #16

A

48-5

90 #16(A-BL,BN-BT,BW,BX)

1 #8(CD)

9 #12(BM,BU,BV,BY-CC,CE)

A

44-1

36 #16(A-S,Z-t

6 #12(T-Y)

D

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

Shell Size

No. of Contacts

Service Rating

¢

†

A

BCDEFG

HJ K L M N P Q

R

STUVWXYZa b

cdefgh jkm

np

q

AA AB AC AD AE AF AG AH AJ AK AL

AM AN AP AQ AR AS AT AU AV AW

AX AY AZ BA BB BC BD BE BF BG

BH BJ BK BL BM BM BP BQ BR

BS BU BV BW BX

BT BZ

BY CC CD

CA CB

CE

AA AB

AC AD AE AF AG AJ AK AL AM AN

AP AR AS AT AU AV AW AX AY

AZ BA BB BC BD BE BF BG

BJ BK BL BNBM BP BR

BS BU BV

BT

rs t u vwx y z

A

1

24

23

22

21

20

19

18

17 16 15 14

35

50

59

60

54

42

41

53

52

51

36

40

39

38

37

25

43

55

58

49

34

13

2

26

44

56

57

48

33

12

34

28

27

45

46

47

32

11

29

30

31

10

5

6

7

8

98

A

B

C

D

E

F

G

H

J

JI

K

L

M

N

O

N

P

R

S

T

U

V

W

X

Y

Z

a

b

c

d

de

f

g

hi

h

j

k

m

n

o

p

qr

r

s

t

uvwxyz

A

AAAA

A

AA

A

B

BB

B

C

CC

C

CC

C

D

DD

D

E

EE

E

F

FF

F

G

H

J

JJ

J

III

I

K

LL

L

M

NN

N

O

P

PP

Q

R

S

T

U

V

WW

W

X

Y

Z

a

bb

b

cc

c

d

e

f

fg

g

h

hl

i

j

k

m

n

npp

p

pq

qr

r

s

t

u

uv

v

vw

w

wx

x

y

z

zAA AA

AB AB

AK AJ AM

AD AD

AE AE

AF AF

AG AG

AC AC

z

†

Not MS Approved. ITT Cannon Proprietary (see ITT Cannon

designed alternative insert positions, page A-90 High Volume Layouts - readily

available from Cannon Distributors

¢

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 88

A-89

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015

MS-E/F/R

MS Alternate Insert Positions

Normal Position

AB

Position W Position X Position Y Position Z

All views are looking into front of pin insert of rear of socket insert.

Contact Alternate Positions

Shell Arrange- Wire Degrees

Size ment Size Service Rating W X Y Z

8S 8S-1 1 #16 A - - - -

10S 10S-2 1 #16 A - - - -

10SL-4 2 #16 A - - - -

10SL-3 3 #16 A - - - -

12 12-5 1 #12 D - - - -

12S 12S-4 1 #16 D - - - -

12S-3 2 #16 A 70 145 215 290

14 14-3 1 #8 A - - - -

14S 14S-1 3 #16 A - - - -

14S-2 4 #16 Inst. - 120 240 -

14S-5 5 #16 Inst. - 110 - -

14S-6 6 #16 Inst. - - - -

14S-7 3 #16 A 90 180 270 -

14S-9 2 #16 A 70 145 215 290

16 16-7 2#16 A 80 110 250 280

1#8

16-9 2 #16 A 35 110 250 325

2 #12

16-10 3 #12 A 90 180 270 -

16-12 1 #4 A - - - -

16-11 2 #12 A 35 110 250 325

16-13 2 #12 A 35 110 250 325

16S 16S-1 7 #16 A 80 - - 280

16S-4 2 #16 D 35 110 250 325

16S-5 3 #16 A 70 145 215 290

16S-6 3 #16 A 90 180 270 -

16S-8 5 #16 A - 170 265 -

18 18-1 10 #16 A(B,C,F,G) 70 145 215 290

Inst.(all others)

18-3 2 #12 D 35 110 250 325

18-4 4 #16 D 35 110 250 325

18-5 1 #16 D 80 110 250 280

2 #12

18-7 1 #8 B - - - -

18-8 7 #16 A 70 - - 290

1 #12

18-9 5 #16 Inst. 80 110 250 280

2 #12

18-10 4 #12 A - 120 240 -

18-11 5 #12 A - 170 265 -

18-12 6 #16 A 80 - - 280

18-13 3 #12 A 80 110 250 280

1 #8

18-15 4 #12 A - 120 240 -

18-19 10 #16 A - 120 240 -

18-22 3 #16 D 70 145 215 290

20 20-2 1 #0 D - - - -

20-3 3 #12 D 70 145 215 290

20-4 4 #12 D 45 110 250 -

20-7 8 #16 A(C-F) 80 110 250 280

D(A,B,G,H)

20-8 4 #16 Inst. 80 110 250 280

2 #8

20-14 3 #12 A 80 110 250 280

2 #8

20-15 7 #12 A 80 - - 280

20-16 7 #16 A 80 110 250 280

2 #12

20-17 1 #16 A 90 180 270 -

5 #12

20-18 6 #16 A 35 110 250 325

3 #12

20-19 3 #8 A 90 180 270 -

Contact Alternate Positions

Shell Arrange- Wire Degrees

Size ment Size Service Rating W X Y Z

20 20-22 3 #16 A 80 110 250 280

3 #8

20-23 2 #8 A 35 110 250 325

20-24 2 #16 A 35 110 250 325

2 #8

20-27 14 #16 A 35 110 250 325

20-29 17 #16 A 80 - - 280

20-33 11 #16 A - - - -

22 22-2 3 #8 D 70 145 215 290

22-4 2 #12 A 35 110 250 325

2 #8

22-5 4 #16 D 35 110 250 325

2 #12

22-6 1 #16 D 80 110 250 280

2 #8

22-7 1 #0 E - - - -

22-9 3 #12 E 70 145 215 290

22-10 4 #16 E 35 110 250 325

22-11 2 #16 B 35 110 250 325

22-12 3 #16 D 80 110 250 280

2 #8

22-13 1 #16 A(A-D) 35 110 250 325

4 #12 D(E)

22-14 19 #16 A 80 - - 280

22-15 1 #16 A(A-C,E,F) 80 110 250 280

5 #12 E(D)

22-17 8 #16 D(A) 80 110 250 280

1 #12 A(all others)

22-18 8 #16 A(C-E) 80 110 250 280

D(all others)

22-19 14 #16 A 80 110 250 280

22-20 9 #16 A 35 110 250 325

22-22 4 #8 A - 110 250 -

22-23 8 #12 D(H) 35 - 250 -

A(all others)

22-27 8 #16 D(J) 80 - 250 280

1 #8 A(all others)

22-28 7 #12 A 80 - - 280

24 24-2 7 #12 D 80 - - 280

24-5 16 #16 A 80 110 250 280

24-6 8 #12 D(A,G,H) 80 110 250 280

A(all others)

24-7 14 #16 A 80 110 250 280

2 #12

24-9 2 #4 A 35 110 250 325

24-10 7 #8 A 80 - - 280

24-11 6 #12 A 35 110 250 325

3 #8

24-12 3 #12 A 80 110 250 280

2 #4

24-20 9 #16 D 80 110 250 280

2 #12

24-22 4 #8 D 45 110 250 -

24-27 7 #16 E 80 - - 280

24-28 24 #16 Inst. 80 110 250 280

28 28-1 6 #12 D(A,E,J) 80 110 250 280

3 #8 A(all others)

28-2 12 #16 D 35 110 250 325

2 #12

28-7 2 #4 D 35 110 250 325

28-9 6 #16 80 110 250 280

6 #12 D

Contact Alternate Positions

Shell Arrange- Wire Degrees

Size ment Size Service Rating W X Y Z

28 28-10 3 #12 D(G) 80 110 250 280

2 #8 A(all others)

2 #4

28-11 18 #16 A 80 110 250 280

4 #12

28-12 26 #16 A 90 180 270 -

28-15 35 #16 A 80 110 250 280

28-16 20 #16 A 80 110 250 280

28-17 15 #16 A(A-L),B(R) 80 110 250 280

D(M-P)

28-19 6 #16 A(C,E,G,J,K,L) 80 110 250 280

4 #12 B(H,M), D(A,B)

28-20 4 #16 A 80 110 250 280

10 #16

28-21 37 #16 A 80 110 250 280

28-22 3 #16 D 70 145 215 290

3 #4

32 32-1 3 #12 E(A) 80 110 250 280

2 #0 D(all others)

32-5 2 #0 D 80 110 250 325

32-6 16 #16 A 80 110 250 280

2 #12

3 #8

2 #4

32-7 28 #16 Inst.(A,B,h,j) 80 125 235 280

7 #12 A(all others)

32-8 24 #16 A 80 125 235 280

6 #12

32-9 12 #16 D 80 110 250 280

2 #4

32-15 2 #0 D 35 110 250 280

6 #12

32-17 4 #4 D 45 110 250 -

36 36-4 3 #0 A(B,C) 70 145 215 290

D(A)

36-5 4 #0 A - 120 240 -

36-6 4 #4 A 35 110 250 325

2 #0

36-7 40 #16 A 80 110 250 280

7-12

36-8 46 #16 A 80 110 250 280

1 #12

36-9 14 #16 A 80 125 235 280

14 #12

2 #8

1 #4

36-10 48 #16 A 80 125 235 280

36-14 6 #16 D 90 180 270 -

5 #12

5 #8

36-15 35 #16 D(m) 60 125 245 305

A(all others)

40 40-10 16 #16 A 65 125 225 310

9 #8

4 #4

40-56 85 #16 A 72 144 216 288

44 44-1 36 #16 D 65 125 225 310

6 #12

48 48-5 90 #16 A 65 125 225 310

1 #8

9 #12

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 89

A-90 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MS-E/F/R/ER

MIL-C-5015 Connectors

ITT Cannon Designated Alternate Insert Positions

Shell Contact Wire Service Available

Size Arrangement Size Rating Position

20 20A-9 9#12 D (J)

A (all others)

20 20A-48 19#16 Inst. 4 9

28 28A-16 5#16 A (e)

4#4 Inst (all others) 2 12

28 28A-63 9#12 A (e)

19#16 Inst (all others)

32 32A-69 41#20

20#16 Inst 3 8

20 220

21 255

22 290

23 165

24 330

25 235

26 125

2

20

17

12

4

9

8,13

11

6

22

19

5,3

15

21

18

16

14

NOTE: Front view of pin insulator rotates as shown.

Not MS approved.

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 90

A-91

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Shell

Size

8S

10S

10SL

12S

14S

16S

12

14

16

18

20

22

24

28

32

36

40

B

Min.

.375 (9.53)

.625 (15.88)

E

Max.

.235 (5.97)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.610 (15.49)

.735 (18.67)

.740 (18.80)

.922 (23.42)

1.235 (31.37)

1.360 (34.54)

1.628 (41.35)

E

Min.

.102 (2.59)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.285 (7.24)

.350 (8.89)

.468 (11.89)

.664 (15.87)

.694 (17.63)

.911 (23.14)

K

Max.

.125 (3.18)

.140 (3.56)

.146 (3.71)

.180 (4.57)

.203 (5.16)

L

Max.

2.250 (57.15)

2.625 (66.68)

2.688 (68.28)

2.750 (69.85)

2.969 (75.44)

3.031 (76.99)

3.281 (84.34)

3.560 (89.66)†

L1

Max.

1.838 (46.69)

2.181 (55.40)

2.322 (58.98)

2.427 (61.65)†

E

+.031

-.000

.562 (14.27)

.750 (19.05)

.812 (20.62)

.875 (22.23)

P

Max.

.890 (22.61)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

1.450 (36.83)

1.570 (39.88)

1.880 (47.75)

2.205 (56.01)

2.400 (60.96)

2.840 (72.14)

R

± .005

.594 (15.09)

.719 (18.26)

.812 (20.62)

.906 (23.01)

.969 (24.61)

.812 (20.62)

.906 (23.01)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.375 (34.93)

1.562 (39.67)

1.750 (44.45)

1.938 (49.23)

2.188 (55.58)

S

± .031

.875 (22.23)

1.000 (25.40)

1.094 (27.79)

1.188 (30.18)

1.281 (32.54)

1.094 (27.79)

1.188 (30.18)

1.281 (32.54)

1.375 (34.93)

1.500 (38.10)

1.625 (41.28)

1.750 (44.45)

2.000 (50.80)

2.250 (57.15)

2.500 (63.50)

2.750 (69.85)

T

+ .010

- .005

.120 (3.05)

.147 (3.73)

.173 (4.39)

V

Max.

.840 (21.34)

.900 (22.86)

1.100 (27.94)

1.200 (30.48)

.900 (22.86)

1.100 (27.94)

1.200 (30.48)

1.300 (33.02)

1.500 (38.10)

1.740 (44.20)

2.075 (52.71)

2.300 (58.42)

2.688 (68.28)

W

Max.

1.046 (26.57)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.609 (40.87)

1.890 (48.01)

2.170 (55.12)

2.656 (67.46)

2.922 (74.22)

-

† Not to MS specification

MS3100E / MS3100F

Integral Cable Clamp

CA3100E / CA3100E MS3100F wall mounting

receptacles are used to carry

wires thru walls or bulkheads,

or to provide a means of

disconnection at a bulkhead.

MS3100F receptacles mate

with 3106 and 3108 plugs.

MS3100E is identical to

MS3100F and is available upon

request. For new equipment,

customer should specify

MS3100F.

R0013ACR0013SM The MS3100R receptacle is

identical in purpose to the

MS3100F. The MS3100R

features a shorter light

weight endbell and mates

with 3106 and 3108 plugs.

Shell Size A Thread

8S 1/2-28UNEF-2A

10S 5/8-24UNEF-2A

10SL 5/8-24UNEF-2A

12S 3/4-20UNEF-2A

14S 7/8-20UNEF-2A

16S 1-20UNEF-2A

12 3/4-20UNEF-2A

14 7/8-20UNEF-2A

Shell Size A Thread

16 1-20UNEF-2A

18 1-1/8-18UNEF-2A

20 1-1/4-18UNEF-2A

22 1-3/8-18UNEF-2A

24 1-1/2-18UNEF-2A

28 1-3/4-18UNS-2A

32 2-18UNS-2A

36 2-1/4-16UN-2A

40 2-1/2-16UN-2A

W

V

A Thd.

T Dia.

4 Mtg. Holes

S

Typ.

R

Typ.

B

ML

K

E

P

T Dia.

4 Mtg. Holes

R T yp.

S T yp.

A Thd.

B

M

1

LK

MIL-DTL-5015 Connectors

MS-E/F/R

Wall Mounting Receptacle

A

Circular

Performance Specifications - Page A-84

Contact, Ceiling Plugs, Assembly Tools - Page A-105

Contact Arrangements - Page A-85 – A-89

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 91

A-92 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015

MS-E/F/R

Cable Connecting Plug (Receptacle with no mounting flange)

† Not to MS specification

Shell

Size

8S

10S

10SL

12S

14S

16S

12

14

16

18

20

22

24

28

32

36

40

B

Min.

.375 (9.53)

.625 (15.88)

E

Max.

.235 (5.97)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.610 (15.49)

.735 (18.67)

.740 (18.80)

.922 (23.42)

1.235 (31.37)

1.360 (34.54)

1.628 (41.35)

E

Min.

.102 (2.59)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.285 (7.24)

.350 (8.89)

.468 (11.89)

.664 (15.87)

.694 (17.63)

.911 (23.14)

G

Max.

.844 (21.44)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.281 (32.54)

1.062 (26.97)

1.156 (29.36)

1.281 (32.54)

1.344 (34.14)

1.500 (38.10)

1.625 (41.28)

1.750 (44.45)

2.000 (50.80)

2.250 (57.15)

2.500 (63.50)

2.750 (69.85)

K

Max.

.125 (3.18)

.140 (3.56)

.146 (3.71)

.180 (4.57)

.203 (5.16)

L

Max.

2.250 (57.15)

2.625 (66.68)

2.688 (68.28)

2.750 (69.85)

2.969 (75.44)

3.031 (76.99)

3.281 (84.34)

3.560 (89.66)†

L1

Max.

1.838 (46.69)

2.181 (55.40)

2.322 (58.98)

2.427 (61.65)†

M

+.031 (0.79)

-.000 (0.00)

.562 (14.27)

.750 (19.05)

.812 (20.62)

.875 (22.23)

P

Max.

.890 (22.61)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

1.450 (36.83)

1.570 (39.88)

1.880 (47.75)

2.205 (56.01)

2.400 (60.96)

2.840 (72.14)

S1

Max.

.515 (13.08)

.640 (16.26)

.765 (19.43)

.890 (22.61)

1.015 (25.78)

.765 (19.43)

.890 (22.61)

1.015 (25.78)

1.140 (28.96)

1.265 (32.13)

1.390 (35.31)

1.515 (38.48)

1.765 (44.83)

2.015 (51.18)

2.270 (57.66)

2.427 (61.65)

V

Max.

.840 (21.34)

.900 (22.86)

1.100 (27.94)

1.200 (30.48)

.900 (22.86)

1.100 (27.94)

1.200 (30.48)

1.300 (33.02)

1.500 (38.10)

1.740 (44.20)

2.075 (52.71)

2.300 (58.42)

2.688 (68.28)

W

Max.

1.046 (26.57)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.609 (40.87)

1.890 (48.01)

2.170 (55.12)

2.656 (67.46)

2.922 (74.22)

-

MS3101E / MS3101F

Integral Cable Clamp

CA3101E / CA3101E MS3101E cable connecting

plugs are used for cable

extension requirements,

where mounting provisions

are unnecessary.

MS3101E receptacle mate

with 3106, and 3108 plugs.

Note: MIL-C-5015 has

changed the nomenclature

of the 3101 from Receptacle

to Plug.

R1013ACR1013SM MS3101R cable connecting

plug is identical in purpose to

the MS3101E. The MS3101R

features a shorter light

weight endbell and mates

.sgulp 8013 dna ,6013 htiw

Performance Specifications - Page XXX

Contact, Ceiling Plugs, Assembly Tools - Page XXX

Contact Arrangements - Page XXX

Shell Size A Thread

8S 1/2-28UNEF-2A

10S 5/8-24UNEF-2A

10SL 5/8-24UNEF-2A

12S 3/4-20UNEF-2A

14S 7/8-20UNEF-2A

16S 1-20UNEF-2A

12 3/4-20UNEF-2A

14 7/8-20UNEF-2A

Shell Size A Thread

16 1-20UNEF-2A

18 1-1/8-18UNEF-2A

20 1-1/4-18UNEF-2A

22 1-3/8-18UNEF-2A

24 1-1/2-18UNEF-2A

28 1-3/4-18UNS-2A

32 2-18UNS-2A

36 2-1/4-16UN-2A

40 2-1/2-16UN-2A

W

G

S1

P

V

A Thd.

B

M

L

K

E

G

S1

P

A Thd.

B

M

1

L

K

Performance Specifications - Page A-84

Contact, Ceiling Plugs, Assembly Tools - Page A-105

Contact Arrangements - Page A-85 – A-89

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 92

A-93

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

† Not to MS specification

Shell

Size

8S

10S

10SL

12S

14S

16S

12

14

16

18

20

22

24

28

32

36

40

E

Max.

.235 (5.97)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.297 (7.54)

.422 (10.72)

.547 (13.89)

.610 (15.49)

.735 (18.67)

.740 (18.80)

.922 (23.42)

1.235 (31.37)

1.360 (34.54)

1.628 (41.35)

E

Min.

.102 (2.59)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.285 (7.24)

.350 (8.89)

.468 (11.89)

.664 (15.87)

.694 (17.63)

.911 (23.14)

J**

Max.

.536 (13.61)

.724 (18.39)

L

Max.

2.250 (57.15)

2.625 (66.68)

2.688 (68.28)

2.750 (69.85)

2.969 (75.44)

3.031 (76.99)

3.281 (84.34)

3.560 (89.66)†

L1

Max.

1.838 (46.69)

2.181 (55.40)

2.322 (58.98)

2.427 (61.65)†

N

Max.

.890 (22.61)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

.970 (24.64)

1.150 (29.21)

1.250 (31.75)

1.450 (36.83)

1.570 (39.88)

1.880 (47.75)

2.205 (56.01)

2.400 (60.96)

2.840 (72.14)

P1

Max.

.844 (21.44)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.344 (34.14)

1.469 (37.31)

1.594 (40.49)

1.719 (43.66)

1.969 (50.01)

2.219 (56.36)

2.469 (62.71)

2.723 (69.16)†

V

Max.

.840 (21.34)

.900 (22.86)

1.100 (27.94)

1.200 (30.48)

.900 (22.86)

1.100 (27.94)

1.200 (30.48)

1.300 (33.02)

1.500 (38.10)

1.740 (44.20)

2.075 (52.71)

2.300 (58.42)

2.688 (68.28)

W

Max.

1.046 (26.57)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.125 (28.58)

1.343 (34.11)

1.484 (37.69)

1.609 (40.87)

1.890 (48.01)

2.170 (55.12)

2.656 (67.46)

2.922 (74.22)

-

MS3106E / MS3106F CA3106E / CA3106E MS3106F straight plugs mate

with 3100, 3102 and 3102

receptacles.

MS3106E is available upon

request. For new equipment,

customer should specify

MS3106F. MS3106E is identical

to MS3106F except to O-ring

under the coupling nut.

R6013ACR6013SM MS3106R straight plug is

identical in purpose to the

MS3106F. The MS3106R has

the shorter endbell. This plug

will mate with 3100, 3101, and

3102 receptacles.

Straight Plug

N

J**

A

1

L

1

P

WA Thd.

V

J**

L

1

PE

MIL-DTL-5015 Connectors

MS-E/F/R

MS3102E / MS3102R CA3102E / CA3102R

MS3102E and MS3102R box mounting receptacles are used in

junction boxes or as an integral part of equipment. These

connectors are identical in construction and will mate with

3106 and 3108 plugs. For new equipment, customers should

specify MS3102R.

Box Mounting Receptacle

X DIMENSION

Max. Solder Pot Ext. - Pin or Socket

Contact Size

Shell Size 16 12 8 4 0

8S, 10S, 10SL .534 - - - -

12S, 14S, 16S .518 - - - -

12 .705 .705 - - -

14 .705 .705 .767 - -

16 .705 .705 .767 .767 -

18 .674 .674 .736 .736 -

20, 22 .674 .674 .736 .736 .971

24, 28 .612 .612 .674 .674 .909

32, 36 .549 .549 .611 .611 .846

L

MK

P

X

B

T Dia.

4 Mtg. Holes

A Thd.

(Class-2A)

Max. Solder

Pot Extension

R

S

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 93

A-94 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Connectors

MS-E/F/R

Shell Size A Thread

8S 1/2-28UNEF-2A

10S 5/8-24UNEF-2A

10SL 5/8-24UNEF-2A

12S 3/4-20UNEF-2A

14S 7/8-20UNEF-2A

16S 1-20UNEF-2A

12 3/4-20UNEF-2A

14 7/8-20UNEF-2A

Shell Size A Thread

16 1-20UNEF-2A

18 1-1/8-18UNEF-2A

20 1-1/4-18UNEF-2A

22 1-3/8-18UNEF-2A

24 1-1/2-18UNEF-2A

28 1-3/4-18UNS-2A

32 2-18UNS-2A

36 2-1/4-16UN-2A

40 2-1/2-16UN-2A

Straight Plug (continued)

† Not to MS specification

Shell

Size

8S

10S

10SL

12S

14S

16S

12

14

16

18

20

22

24

28

32

36

40

B

Min.

.375 (9.53)

.625 (15.88)

J**

Max.

.536 (13.61)

.724 (18.39)

K

Max.

.125 (3.18)

.140 (3.56)

.146 (3.71)

.180 (4.57)

.203 (5.16)

L

Max.

1.040 (26.42)

1.400 (35.56)

L3

Max.

2.156 (54.76)

2.188 (55.58)

2.312 (58.72)

2.406 (61.11)

2.531 (64.29)

2.688 (68.28)

2.781 (70.64)

2.844 (72.24)

3.250 (82.55)

3.719 (94.46)

4.188 (106.38)

4.297 (109.14)

7.211 (183.16)†

M

+.031 (0.79)

-.000 (0.00)

.562 (14.27)

.750 (19.05)

.812 (20.62)

.875 (22.23)

P

Max.

.426 (10.86)

.520 (13.21)

.614 (15.60)

.739 (18.77)

.664 (21.95)

.614 (15.60)

.739 (18.77)

.864 (21.95)

.989 (25.12)

1.145 (29.08)

1.270 (32.26)

1.395 (35.43)

1.614 (41.00)

1.864 (47.35)

2.051 (52.10)

2.390 (60.71)

P1

Max.

.844 (21.44)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.344 (34.14)

1.469 (37.31)

1.594 (40.49)

1.719 (43.66)

1.969 (50.01)

2.219 (56.36)

2.469 (62.71)

2.723 (69.16)†

R

± .005

.594 (15.09)

.719 (18.26)

.812 (20.62)

.906 (23.01)

.969 (24.61)

.812 (20.62)

.906 (23.01)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.375 (34.93)

1.562 (39.67)

1.750 (44.45)

1.938 (49.23)

2.188 (55.58)

S

± .031

.875 (22.23)

1.000 (25.40)

1.094 (27.79)

1.188 (30.18)

1.281 (32.54)

1.094 (27.79)

1.188 (30.18)

1.281 (32.54)

1.375 (34.93)

1.500 (38.10)

1.625 (41.28)

1.750 (44.45)

2.000 (50.80)

2.250 (57.15)

2.500 (63.50)

2.750 (69.85)

T

+ .010

- .005

.120 (3.05)

.147 (3.73)

.173 (4.39)

V1

Max.

1.281 (30.94)

1.250 (31.75)

1.281 (32.54)

1.406 (35.71)

1.531 (38.89)

1.281 (32.54)

1.406 (35.71)

1.531 (38.89)

1.593 (40.46)

1.656 (42.06)

1.718 (43.64)

1.890 (48.01)

1.968 (49.99)

2.187 (55.55)

2.406 (61.11)

5.875 (149.22)

X1

Max.

.811 (20.60)

.842 (21.39)

.873 (22.17)

.936 (23.77)

.998 (25.35)

.873 (22.17)

.936 (23.77)

.998 (25.35)

1.061 (26.95)

1.123 (28.52)

1.186 (30.12)

1.263 (32.08)

1.342 (34.09)

1.561 (39.65)

1.780 (45.21)

-

Y

Max.

1.640 (41.66)

1.703 (43.26)

1.765 (44.83)

1.796 (45.62)

2.062 (52.37)

2.125 (53.98)

2.156 (54.76)

2.250 (57.15)

2.312 (58.72)

2.531 (64.29)

2.750 (69.85)

2.875 (73.02)

5.690 (144.53)

MS3108E / MS3108R CA3108E / CA3108R MS3108R 90° angle plugs with O-ring

seal (less cable clamp) and the

MS3108E 90° angle plugs (less O-ring

seal with cable clamp) are used where

there is limited space and where wires

must be brought at abrupt angles.

These plugs will mate with 3100,

3101 and 3102 receptacles.

Performance Specifications - Page A-74

Contact, Ceiling Plugs, Assembly Tools - Page A-95

Contact Arrangements - Page A-75 – A-79

90° Angle Plug

A Thread

Shell Box Mounting 90° Angle

Size Receptacle Plug

8S 1/2-28UNEF-2A 1/2-28UNEF-2B

10S 5/8-24UNEF-2A 5/8-24UNEF-2B

10SL 5/8-24UNEF-2A 5/8-24UNEF-2B

12S 3/4-20UNEF-2A 3/4-20UNEF-2B

14S 7/8-20UNEF-2A 7/8-20UNEF-2B

16S 1-20UNEF-2A 1-20UNEF-2B

12 3/4-20UNEF-2A 3/4-20UNEF-2B

14 7/8-20UNEF-2A 7/8-20UNEF-2B

A Thread

Shell Box Mounting 90° Angle

Size Receptacle Plug

16 1-20UNEF-2A 1-20UNEF-2B

18 1-1/8-18UNEF-2A 1-1/8-18UNEF-2B

20 1-1/4-18UNEF-2A 1-1/4-18UNEF-2B

22 1-3/8-18UNEF-2A 1-3/8-18UNEF-2B

24 1-1/2-18UNEF-2A 1-1/2-18UNEF-2B

28 1-3/4-18UNS-2A 1-3/4-18UNS-2B

32 2-18UNS-2A 2-18UNS-2B

36 2-1/4-16UN-2A 2-1/4-16UN-2B

40 2-1/2-16UN-2A 2-1/2-16UN-2B

J**

A Thd.

(Class-2B)

End of

Thread

(MS3108R)

Thread for

Attachment

of M85049/41

(MS3057)

Cable Clamp

Y

3

L

1

V

1

P

1

X

Performance Specifications - Page A-84

Contact, Ceiling Plugs, Assembly Tools - Page A-105

Contact Arrangements - Page A-85 – A-89

Performance Specifications - Page A-84

Contact, Ceiling Plugs, Assembly Tools - Page A-105

Contact Arrangements - Page A-85 – A-89

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 94

A-95

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Connectors

MS-E/F/R

Components

Endbell

Ferrule

Grommet

Pin Contacts

Insulator

Coupling Nut

Barrel

O Ring

CABLE

CLAMP

MS3106R

CA3106R

Straight Plug

Note: Class F is not applicable to MS3108 shell style. * Class E inactive for new design. Use Class F or R.

MS3106F

CA06R

Straight Plug

MS3106E*

CA3106E

Straight Plug

MS3108E

CA3108E

90° Angle Plug

MS3108R

CA3108R

90° Angle Plug

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 95

A-96 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Connectors

MS-E/F/R

Shell

Size

8S

10S

10SL

12S

14S

16S

12

14

16

18

20

22

24

28

32

36

L

Max.

1.531 (38.89)

1.968 (49.99)

2.188 (55.58)

R

± .005 (±0.13)

.594 (15.09)

.719 (18.26)

.812 (20.62)

.906 (23.01)

.969 (24.61)

.812 (20.62)

.906 (23.01)

.969 (24.61)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.375 (34.93)

1.562 (39.67)

1.750 (44.45)

1.938 (49.23)

S

Max.

.906 (23.01)

1.031 (26.19)

1.125 (28.58)

1.219 (30.96)

1.312 (33.32)

1.125 (28.58)

1.219 (30.96)

1.312 (33.32)

1.406 (35.71)

1.531 (38.89)

1.656 (42.06)

1.781 (45.24)

2.031 (51.59)

2.281 (57.94)

2.531 (64.29)

R

+.010 (+0.25)

-.005 (-.031)

.120 (3.05)

.147 (3.73)

.173 (4.39)

A

Thread

1/2-28UNEF-2A

5/8-24NEF-2A

3/4-20UNEF-2A

7/8-20UNEF-2A

1-20UNEF-2A

3/4-20UNEF-2A

1-20UNEF-2A

1-1/8-180NEF-2A

1-1/4-18NEF-2A

1-3/8-18NEF-2A

1-1/2-18NEF-2A

1-3/4-18NS-2A

2-18NS-2A

2-1/4-16UN-2A

MS 25183 - 18 - 10 P

MS 3103 - 18 - 10 P

CA 3100 ER 18 - 10 P

PREFIX

SHELL STYLE

CLASS

SHELL SIZE

CONTACT ARRANGEMENTS

CONTACT TYPE

PREFIX

CA - ITT Cannon prefix indicating special

application or variation of MS

SHELL STYLE

3100 - Wall mounting receptacle (MS3103)

3106 - Straight Plug (MS325183)

3108 - 90° angle plug

CLASS

ER - Resilient insulator, nylon potting cup and

thread attachment ring

No class designator for MS types.

How To Order

Wall Mounting Receptacle

SHELL STYLE

Coupling thread diameter figured in sixteenths

of an inch

CONTACT ARRANGEMENTS

See pages A-85 – A-89

CONTACT TYPE

P - Pin

S - Socket

MS type potting connectors are available with nylon cups. 00 and 06 shell

styles with plastic cups and resilient insulators meet the requirements of

MS3103 and MS25183. Also available is the 08 plug with resilient

insulator and 90° angle nylon potting cup.

ITT Cannon provides for a 1/4" clearance for potting on all contact sizes.

The CA3100ER receptacle (MS3103) is supplied with a resilient insulator and nylon potting cup with a

threaded attachment ring. This receptacle mates with 3106 and 3108 plugs.

Performance Specifications - Page XXX

Contact, Ceiling Plugs, Assembly Tools - Page XXX

Contact Arrangements - Page XXX

MS3103

Nylon Potting Cup

Threaded Attachment Ring

CA3100ER S

RPolarizing

Boss

T Dia.

4 Mtg. Holes A Thd.

L

Performance Specifications - Page A-84

Contact, Ceiling Plugs, Assembly Tools - Page A-105

Contact Arrangements - Page A-85 – A-89

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 96

A-97

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Connectors

MS-E/F/R

Straight Plug

90° Angle Plug

MS25183

Nylon Potting Cup

Rubber Gasket

Nylon Potting Cup

Rubber Gasket

CA3108ER

CA3106ER

The CA3106ER plug is supplied with resilient insulators, nylon potting cups with threaded attachment rings,

and a rubber gasket under the coupling nut. This plug mates with 3100, 3101 and 3102 recaptacles.

The CA3108ER is supplied with resilient insulator, 90º nylon potting cup and threaded attachment ring with a

rubber gasket under the coupling nut. This plug mates with 3100, 3101 and 3102 receptacles.

CA3106ER

Shell J L P A

Size Max. Max. Max. Thread

8S .536 (13.61) 1.562 (39.67) .844 (21.44) 1/2-28UNEF-2B

10S .536 (13.61) 1.562 (39.67) .969 (21.44) 5/8-24UNEF-2B

10SL .536 (13.61) 1.562 (39.67) .969 (21.44) 5/8-24UNEF-2B

12S .536 (13.61) 1.562 (39.67) 1.062 (21.44) 3/4-20UNEF-2B

14S .536 (13.61) 1.562 (39.67) 1.156 (21.44) 7/8-20UNEF-2B

16S .536 (13.61) 1.562 (39.67) 1.250 (21.44) 1-20UNEF-2B

12 .724 (18.39) 2.000 (50.80) 1.062 (26.97) 3/4-20UNEF-2B

14 .724 (18.39) 2.000 (50.80) 1.156 (29.36) 7/8-20UNEF-2B

16 .724 (18.39) 2.000 (50.80) 1.250 (31.75) 1-20UNEF-2B

18 .724 (18.39) 2.000 (50.80) 1.344 (34.14) 1-1/8-18UNEF-2B

20 .724 (18.39) 2.125 (53.98) 1.469 (37.31) 1-1/4-18UNEF-2B

22 .724 (18.39) 2.125 (53.98) 1.594 (40.49) 1-3/8-18UNEF-2B

24 .724 (18.39) 2.125 (53.98) 1.719 (43.66) 1-1/2-18UNEF-2B

28 .724 (18.39) 2.125 (53.98) 1.969 (50.01) 1-3/4-18UNS-2B

32 .724 (18.39) 2.180 (55.37) 1.219 (30.96) 2-18UNS-2B

36 .724 (18.39) 2.180 (55.37) 2.469 (62.71) 2-1/4-16UN-2B

40 .724 (18.39) 2.180 (55.37) 2.723 (69.16) 2-1/2-16UN-2B

CA3108ER

L Max.

For Arr. For Arr.

w/#16 w/#8

B D &#12 &#4 P A

Max. Max. Contacts Contacts Max. Thread

------

.563(13.61) 1.040(26.42) 1.463(37.16) - 969(24.61) 5/8-24UNEF-2B

.563(13.61) 1.040(26.42) 1.600(40.64) - 1.062(26.97) 3/4-24UNEF-2B

.563(13.61) 1.040(26.42) 1.600(40.64) 2.300(58.42) 1.156(29.36) 7/8-20UNEF-2B

.563(13.61) 1.290(32.77) 1.600(40.64) 2.550(64.77) 1.250(31.75) 1-20UNEF-2B

.724(18.39) 1.040(26.42) 1.910(48.51) - 1.062(26.97) 3/4-20UNEF-2B

.724(18.39) 1.040(26.42) 1.910(48.51) 2.610(66.29) 1.156(29.36) 7/8-20UNEF-2B

.724(18.39) 1.290(32.77) 1.910(48.51) 2.850(72.39) 1.250(31.75) 1-20UNEF-2B

.724(18.39) 1.290(32.77) 2.100(53.34) 2.850(72.39) 1.344(34.14) 1-1/8-18UNEF-2B

.724(18.39) 1.540(39.12) 2.100(53.34) 2.850(72.39) 1.469(37.31) 1-1/4-18UNEF-2B

.724(18.39) 1.540(39.12) 2.100(53.34) 2.850(72.39) 1.594(40.49) 1-3/8-18UNEF-2B

.724(18.39) 1.790(45.47) 2.281(57.94) 2.985(75.82) 1.719(43.66) 1-1/2-18UNEF-2B

.724(18.39) 2.040(51.82) 2.485(63.12) 2.985(75.82) 1.969(50.01) 1-3/4-18UNS-2B

.724(18.39) 2.290(58.17) 2.485(63.12) 2.985(75.82) 1.219(30.96) 2-18UNS-2B

.724(18.39) 2.540(64.52) 2.485(63.12) 2.985(75.82) 2.469(62.71) 2-1/4-16UN-2B

P

A Thd.

Gasket

Length of

Engagement Metal Potting Ring

J

To end

of

contact

1/4"

L

P Dia. Polarizing

Groove A Thd. BL

D

Metal

Potting Ring

Performance Specifications - Page A-84

Contact, Ceiling Plugs, Assembly Tools - Page A-105

Contact Arrangements - Page A-85 – A-89

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 97

A-98 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Connectors

MS

Straight Plug with Shrink Boot Adapter

CA3106E-DN

CA3106E-DN is a straight plug with

endbell for shrink boot adapters.

Crimp and solder versions are avail-

able (please indicate ...F80 or ...F183).

CA3106-DN mate with 3100, 3101

and 3102 shell styles.

Order reference A B C D E F L P

Pin insert* Thread min. max. ±0.2 ±0,2 0,5 max. max.

CA3106E10SL-**-P-DN 5/8-24NEF-2B 7,7 13,2 15,5 17,0 11,7 11,7 50,0

CA3106E12S-**-P-DN 3/4-20UNEF-2B 7,9 13,2 15,5 17,8 11,8 58,8 25,6

CA3106E14S-**-P-DN 7/8-20UNEF-2B 10,6 17,0 19,1 19,1 11,7 50,0 28,6

CA3106E16S-**-P-DN 1-20UNEF-2B 13,5 21,9 23,9 23,9 11,5 50,0 31,8

CA3106E12-**-P-DN 3/4-20UNEF-2B 7,9 13,2 15,5 17,8 11,7 50,0 25,6

CA3106E14-**-P-DN 7/8-20UNEF-2B 10,6 17,0 19,1 20,1 11,7 60,0 28,6

CA3106E16-**-P-DN 1-20UNEF-2B 13,5 21,9 23,9 23,5 11,5 60,0 31,8

CA3106E18-**-P-DN 1-1/8-18NEF-2B 14,6 21,9 23,9 26,5 12,7 60,0 34,1

CA3106E20-**-P-DN 1-1/4-18NEF-2B 18,5 26,6 29,6 30,2 12,7 65,0 37,3

CA3106E22-**-P-DN 1-3/8-18NEF-2B 20,8 26,2 29,6 33,6 12,7 65,0 40,5

CA3106E24-**-P-DN 1-1/2-16NEF-2B 24,6 34,5 37,8 36,1 12,7 65,0 43,8

CA3106E28-**-P-DN 1-3/4-18NS-2B 27,0 34,5 37,8 41,4 12,7 65,0 50,0

CA3106E32-**-P-DN 2-18NS-2B 33,3 43,6 47,8 48,6 15,2 70,0 56,3

CA3106E36-**-P-DN 2-1/4-16UN-2B 38,5 43,6 47,8 54,8 15,2 80,0 62,7

*For socket inserts substitute S for P

**Add contact arrangement number (see pages A-85 – A-89)

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 98

A-99

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Bulkhead Receptacles

BFR/TBF

BFR 14S - S P * 1

TBF 20 - 15 PS *

PREFIX

SHELL SIZE

CONTACT ARRANGEMENT

CONTACT TYPE

ALTERNATE POSITION

MOUNTING (BFR ONLY)

PREFIX

BFR - Bulkhead fittings

TBF - Thru bulkhead fittings

SHELL SIZE

Coupling thread diameter figured in sixteenths

of an inch.

CONTACT ARRANGEMENTS

See pages A-85 – A-89

How To Order

Thru-Bulkhead Receptacle

CONTACT TYPE

P - Pin; S - Socket;

PS - pin and socket (TBF only)

ALTERNATE POSITION

(Consult factory for available

alternate positions.)

MOUNTING

-1 obligatory code, BFR only

TBF and BFR pressurized bulkhead receptacles mate with standard

MS type plugs (3106 and 3108) if contact arrangements correspond.

Both the BFR and TBF have resilient insulators. The TBF (thru

bulkhead fitting) version has a double faced construction allowing

mating from both ends. An O-ring is supplied as standard on both

the BFR and TBF. Contacts are silver plated copper or brass alloy.

Shells are aluminum alloy.

TBF thru-bulkhead fittings have pressurized resilient insulators. Special double-

faced pin and socket contact construction permits cable components to be wired

and tested in the shop and then to be plugged into the mounted TBF plug to

complete the installation. The TBF mates with 3106, 3107 and 3108 plugs.

TBF - Resilient Insulator

Pin Insert Ends Socket Insert Ends

A-85 – A-89 egaP - stnemegnarrA tcatnoC A-105 egaP - slooT ylbmessA ,sgulP gnilaeS ,stcatnoCA-84 egaP - snoitacificepS ecnamrofreP

Shell

Size

8S

10S

10SL

12S

14S

16S

12

14

16

18

20

22

24

28

32

36

40

K

Max.

.125 (3.18)

.140 (3.56)

.146 ( 3.71)

.180 (4.57)

.203 (5.16)

L

Max.

1.482 (37.64)

2.030 (51.56)

M

+.031 (0.79)

-.000 (0.00)

.562 (14.27)

.750 (19.05)

.812 (20.62)

.875 (22.22)

.812 (20.62)

.875 (22.22)

R

±.005 (0.13)

.594 (15.09)

.179 (18.26)

.812 (20.62)

.906 (23.01)

.968 (24.59)

.812 (20.62)

.906 (23.01)

.968 (24.59)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.375 (34.92)

1.562 (39.67)

1.750 (44.45)

1.938 (49.23)

2.188 (55.58)

S

±.031 (0.79)

.875 (22.22)

1.000 (25.40)

1.094 (27.79)

1.188 (30.18)

1.281 (32.54)

1.094 (27.79)

1.188 (30.18)

1.281 (32.54)

1.375 (34.92)

1.500 (38.10)

1.625 (34.28)

1.750 (44.45)

2.000 (50.80)

2.250 (57.15)

2.500 (63.50)

2.750 (69.85)

T

+.010 (0.25)

-.005 (0.13)

.120 (3.05)

.147 (3.73)

.173 (4.39)

V

Max.

.325 (8.26)

.445 (11.30)

.383 (9.73)

.320 (8.13)

.383 (9.73)

A

Thread

1/2-28UNEF-2A

5/8-24UNEF-2A

3/4-20UNEF-2A

7/8-20UNEF-2A

1-20UNEF-2A

3/4-20UNEF-2A

7/8-20UNEF-2A

1-20UNEF-2A

1-1/8-18UNEF-2A

1-1/4-18UNEF-2A

1-3/8-18UNEF-2A

1-1/2-18UNEF-2A

1-3/4-18UNS-2A

2-18UNS-2A

2-1/4-16UN-2A

Polarizing Boss Polarizing Boss

S

Typ.

R

Typ.

Panel Thickness A

Thd.

V

L

K

Socket

Side M

Side

T Dia.

4 Mtg. Holes

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 99

A-100 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Bulkhead Receptacles

BFR/TBF

Pressurized Bulkhead Receptacle

Mounting Dimensions

BFR pressurized bulkhead receptacles withstand the air leakage

requirements of MIL-C-5015 not to exceed 1 cu. in. of air per

hour when subjected to a pressure differential of 30 psi at -55°C.

Insulators are resilient material bonded to aluminum shell. Both

pin and socket assemblies are available. The BFR will mate with

standard MS type 3106 and 3108 plugs.

TYPE 1

Shell

Insulator

Lock Nut

O Ring

Position Pin

Mounting

Part No. Example

Standard

Polychloroprene

Hex with 6 wire holes

Neoprene

Standard

Figure 1 or 2

BFR-14S-SP-1

BFR

Shell

Size

8S

10S

10SL

12S

14S

16S

12

14

16

18

20

22

24

28

32

36

C

Max.

.853 (21.67)

1.244 (31.60)

G

Max.

.895 (22.73)

1.015 (25.78)

1.077 (27.36)

1.203 (30.56)

1.327 (33.71)

1.077 (27.36)

1.203 (30.56)

1.327 (33.71)

1.453 (36.91)

1.577 (40.06)

1.827 (48.41)

1.953 (49.61)

2.203 (55.96)

2.577 (65.46)

H

Max.

1.077 (27.36)

1.203 (30.56)

1.327 (33.71)

1.453 (36.91)

1.577 (40.06)

1.327 (33.71)

1.453 (36.91)

1.577 (40.06)

1.703 (43.26)

1.827 (46.41)

1.953 (49.61)

2.077 (52.76)

2.327 (59.11)

2.577 (65.45)

2.827 (71.81)

L

Max.

1.087 (27.61)

1.525 (38.74)

M

Max.

.702 (17.83)

.822 (20.88)

.955 (24.26)

1.072 (27.23)

1.265 (32.13)

.955 (24.26)

1.072 (27.23)

1.265 (32.13)

1.395 (35.43)

1.515 (38.48)

1.635 (41.53)

1.765 (44.83)

2.015 (51.18)

2.205 (56.01)

2.455 (62.36)

N

Max.

.820 (20.83)

.960 (24.38)

1.110 (28.19)

1.250 (31.75)

1.460 (37.08)

1.110 (28.19)

1.250 (31.75)

1.460 (37.08)

1.610 (40.89)

1.750 (44.45)

1.900 (48.26)

2.030 (51.56)

2.330 (59.18)

2.550 (64.77)

2.840 (72.14)

#16

.140 (3.56)

.062 (1.57)

#12

-

.062 (1.57)

T Max.

Solder Pot Ext.

#8

-

.125 (3.18)

#4

-

.125 (3.18)

#0

-

.359 (9.12)

V

Max.

.250 (6.35)

.375 (9.52)

.312 (7.92)

Shell Size A Thread

8S 1/2-28UNEF-2A

10S 5/8-24UNEF-2A

10SL 5/8-24UNEF-2A

12S 3/4-20UNEF-2A

14S 7/8-20UNEF-2A

16S 1-20UNEF-2A

12 3/4-20UNEF-2A

14 7/8-20UNEF-2A

Shell Size A Thread

16 1-20UNEF-2A

18 1-1/8-18UNEF-2A

20 1-1/4-18UNEF-2A

22 1-3/8-18UNEF-2A

24 1-1/2-18UNEF-2A

28 1-3/4-18UNS-2A

32 2-18UNS-2A

36 2-1/4-16UN-2A

AE F

±.005 +.015 (0.38) ±.005

Shell Size (0.13) -.000 (0.00) (0.13)

8S .323 (8.20) .500 (12.70) .373 (9.47)

10S, 10SL .385 (9.78) .625 (15.88) .435 (11.05)

12S, 12 .448 (11.38) .750 (19.05) .498 (12.65)

14S, 14 .510 (12.95) .875 (22.22) .560 (14.22)

16S, 16 .573 (14.55) 1.000 (25.40) .623 (15.82)

18 .635 (16.13) 1.125 (28.58) .685 (17.40)

AE F

±.005 +.015 (0.38) ±.005

Shell Size (0.13) -.000 (0.00) (0.13)

20 .698 (17.73) 1.250 (31.75) .748 (19.00)

22 .760 (19.30) 1.375 (34.92) .810 (20.57)

24 .823 (20.90) 1.500 (38.10) .873 (22.17)

28 .948 (24.08) 1.750 (44.45) .998 (25.35)

32 1.073 (27.25) 2.000 (50.80) 1.123 (28.52)

36 1.198 (30.43) 2.250 (57.15) 1.248 (31.70)

Performance Specifications - Page XX

Contacts, Sealing Plugs, Assembly Tool - Page XX

Contact Arrangements - Page XX

A

cross Hex

N

M

L

CTG

H

A

Thd. V Panel Thickness

Standard Position

Pin is 3/32" Dia.

E

A

E

F

.102 (2.59)

.097 (2.46) DIA .102 (2.59)

.097 (2.46) DIA

Fig. 1 Fig. 2

Performance Specifications - Page A-84

Contact, Ceiling Plugs, Assembly Tools - Page A-105

Contact Arrangements - Page A-85 – A-89

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 100

A-101

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Connectors

Panel Cutouts

Flange dimensions and mounting holes for 5015 type MS

receptacles. Mounting hole diameters do not apply to

MS5015 class KT & KS connectors.

DIM TOL ±.005 ±.031 ±.005

Shell Size R S O T

8S .594 .875 .562 .120

10S & 10SL .719 1.000 .688 .120

12 & 12S .812 1.094 .812 .120

14 & 14S .906 1.188 .938 .120

16 & 16S .969 1.281 1.062 .120

18 1.062 1.375 1.188 .120

20 1.156 1.500 1.312 .120

22 1.250 1.625 1.438 .120

24 1.375 1.750 1.562 .147

28 1.562 2.000 1.812 .147

32 1.750 2.250 2.062 .173

36 1.938 2.500 2.312 .173

40 2.188 2.750 2.562 .173

S

R

T

O

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 101

A-102 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Connectors

Accessories

Plug Metal Protective Caps

03571AC24052SM

CA19741

For 06 and 08 Style Plugs

These externally threaded

metal dust caps are used to

protect the MS3106 and

MS3108 plugs. Material is

aluminum alloy. They are

furnished with sash chain or

less sash chain.

9022AC34052SM

CA2322

For 00, 01 and 02

Style Receptacles

These internally threaded metal

dust caps are used to protect the

MS3100, MS3101 and MS3102

receptacles. Material is aluminum

alloy. They are furnished with sash

chain or less sash chain.

Part Number

Olive Drab Chromate Over

Cadmium Finish with Sash Chain Olive Drab Chromate Over

DChsiniF muimdaCeb llitS yaMhtiW hsiniF dezidonA kcalB

Sash Chain Superceded Purchased by Without Sash Chain Fits B Dia. E Dia. A

MS ITT Cannon MS Number (Ref) ITTC Part Number ITTC Part Number Shell Size Max. Max. Max. Max. Thread

MS25042-8DA CA17530-8000 MS25042-8D CA17530-5100 CA19741-8 8S .656 (16.66) .562 (14.27) 4.500 (114.30) .166 (4.22) 1/2-28UNEF-2A

MS25042-10DA CA17530-8001 MS25042-10D CA17530-5101 CA19741-10 10S, 10SL .656 (16.66) .687 (17.45) 4.500 (114.30) .166 (4.22) 5/8-24UNEF-2A

MS25042-12DA CA17530-8002 MS25042-12D CA17530-5102 CA19741-12 12, 12S .844 (21.44) .812 (20.62) 5.500 (139.70) .166 (4.22) 3/4-20UNEF-2A

MS25042-14DA CA17530-8003 MS25042-14D CA17530-5103 CA19741-14 14, 14S .844 (21.44) .937 (23.80) 5.500 (139.70) .166 (4.22) 7/8-20UNEF-2A

MS25042-16DA CA17530-8004 MS25042-16D CA17530-5104 CA19741-16 16, 16S .844 (21.44) 1.062 (26.97) 5.500 (139.70) .166 (4.22) 1-20UNEF-2A

MS25042-18DA CA17530-8005 MS25042-18D CA17530-5105 CA19741-18 18 .844 (21.44) 1.187 (30.15) 5.500 (139.70) .166 (4.22) 1-1/8-18UNEF-2A

MS25042-20DA CA17530-8006 MS25042-20D CA17530-5106 CA19741-20 20 .844 (21.44) 1.312 (33.32) 5.500 (139.70) .197 (5.00) 1-1/4-18UNEF-2A

MS25042-22DA CA17530-8007 MS25042-22D CA17530-5107 CA19741-22 22 .844 (21.44) 1.437 (36.50) 5.500 (139.70) .197 (5.00) 1-3/8-18UNEF-2A

MS25042-24DA CA17530-8008 MS25042-24D CA17530-5108 CA19741-24 24 .844 (21.44) 1.562 (39.67) 6.000 (152.40) .197 (5.00) 1-1/2-18UNEF-2A

MS25042-28DA CA17530-8009 MS25042-28D CA17530-5109 CA19741-28 28 .844 (21.44) 1.812 (46.02) 8.250 (209.55) .197 (5.00) 1-3/4-18UNEF-2A

MS25042-32DA CA17530-8010 MS25042-32D CA17530-5110 CA19741-32 32 .844 (21.44) 2.062 (52.37) 8.250 (209.55) .228 (5.79) 2-18UNEF-2A

MS25042-36DA CA17530-8011 MS25042-36D CA17530-5111 CA19741-36 36 .844 (21.44) 2.312 (58.72) 8.250 (209.55) .228 (5.79) 2-1/4-16UN-2A

MS25042-40DA CA17530-8012 MS25042-40D CA17530-5112 CA19741-40 40 .844 (21.44) 2.562 (65.07) 8.250 (209.55) .228 (5.79) 2-1/2-16UN-2A

MS25042-44DA CA17530-8013 MS25042-44D CA17530-5113 CA19741-44 44 .844 (21.44) 2.812 (71.42) 8.250 (209.55) .228 (5.79) 2-3/4-16UN-2A

MS25042-48DA CA17530-8014 MS25042-48D CA17530-5114 CA19741-48 48 .844 (21.44) 3.062 (77.77) 8.250 (209.55) .228 (5.79) 3-16UN-2A

Part Number

Olive Drab Chromate Over

Cadmium Finish with Sash Chain Olive Drab Chromate Over

DChsiniF muimdaCeb llitS yaMhtiW hsiniF dezidonA kcalB

Sash Chain Superceded Purchased by Without Sash Chain Fits B Dia. E Dia. A

MS ITT Cannon MS Number (Ref) ITTC Part Number ITTC Part Number Shell Size Max. Max. Max. Max. Thread

MS25043-8DA CA2209-8000 MS25043-8D CA2209-5100 CA2322-1 8S .469 (11.91) .688 (17.48) 4.500 (114.30) .150 (3.81) 1/2-28UNEF-2B

MS25043-10DA CA2209-8001 MS25043-10D CA2209-5101 CA2322-2 10S, 10SL .469 (11.91) .815 (20.70) 4.500 (114.30) .150 (3.81) 5/8-24UNEF-2B

MS25043-12DA CA2209-8002 MS25043-12D CA2209-5102 CA2322-3 12, 12S .469 (11.91) 1.000 (25.40) 5.500 (139.70) .150 (3.81) 3/4-20UNEF-2B

MS25043-14DA CA2209-8003 MS25043-14D CA2209-5103 CA2322-4 14, 14S .469 (11.91) 1.125 (28.58) 5.500 (139.70) .150 (3.81) 7/8-20UNEF-2B

MS25043-16DA CA2209-8004 MS25043-16D CA2209-5104 CA2322-5 16, 16S .469 (11.91) 1.188 (30.18) 5.500 (139.70) .150 (3.81) 1-20UNEF-2B

MS25043-18DA CA2209-8005 MS25043-18D CA2209-5105 CA2322-6 18 .469 (11.91) 1.344 (34.14) 5.500 (139.70) .150 (3.81) 1-1/8-18UNEF-2B

MS25043-20DA CA2209-8006 MS25043-20D CA2209-5106 CA2322-7 20 .469 (11.91) 1.469 (37.31) 5.500 (139.70) .150 (3.81) 1-1/4-18UNEF-2B

MS25043-22DA CA2209-8007 MS25043-22D CA2209-5107 CA2322-8 22 .469 (11.91) 1.594 (40.49) 5.500 (139.70) .150 (3.81) 1-3/8-18UNEF-2B

MS25043-24DA CA2209-8008 MS25043-24D CA2209-5108 CA2322-9 24 .469 (11.91) 1.719 (43.66) 6.000 (152.40) .181 (4.60) 1-1/2-18UNEF-2B

MS25043-28DA CA2209-8009 MS25043-28D CA2209-5109 CA2322-10 28 .531 (13.49) 1.969 (50.01) 8.250 (209.55) .181 (4.60) 1-3/4-18UNS-2B

MS25043-32DA CA2209-8010 MS25043-32D CA2209-5110 CA2322-11 32 .531 (13.49) 2.219 (56.36) 8.250 (209.55) .197 (5.00) 2-18UNS-2B

MS25043-36DA CA2209-8011 MS25043-36D CA2209-5111 CA2322-12 36 .531 (13.49) 2.469 (62.71) 8.250 (209.55) .197 (5.00) 2-1/4-16UN-2B

MS25043-40DA CA2209-8012 MS25043-40D CA2209-5112 CA2322-13 40 .531 (13.49) 2.719 (69.06) 8.250 (209.55) .197 (5.00) 2-1/2-16UN-2B

MS25043-44DA CA2209-8013 MS25043-44D CA2209-5113 CA2322-14 44 .531 (13.49) 2.969 (75.41) 8.250 (209.55) .197 (5.00) 2-3/4-16UN-2B

MS25043-48DA CA2209-8014 MS25043-48D CA2209-5114 CA2322-15 48 .531 (13.49) 3.188 (80.98) 8.250 (209.55) .197 (5.00) 3-16UN-2B

C Dia.

D Dia.

E

B

A Thd.

.250 Min.

Perf. Thd.

C Dia.

D Dia.

B

E

A Thd.

Gasket

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 102

A-103

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Connectors

Accessories

Cable Clamp

Telescoping Bushing

M85049-41

With or without bushing

M85049-41 cable clamp is made for plugs and receptacles that have an endbell

with external conduit threads. The double clamping action provides a balanced,

positive hold on the wires and greatly reduces moisture transmission. Provision is

made for safety wiring. This clamp is supplied without bushing; to order bushing,

add “with bushing” after part number.

MS3420/

MS39056(REF.)

CA18220

Telescoping gland bushing (used with M85049/41 cable

clamp) keep dirt, oil and moisture out of endbell. Taping or

wrapping wires is eliminated since bushing protects wires

going through clamp. Combinations of bushings may be used

to decrease cable entry diameter to improve sealing.

*To order cable clamp with bushing, add “with bushing” after part number.

Part

Number*

M85049/41-3A

M85049/41-4A

M85049/41-6A

M85049/41-8A

M85049/41-10A

M85049/41-12A

M85049/41-16A

M85049/41-20A

M85049/41-24A

M85049/41-28A

M85049/41-32A

M85049/41-40A

Superceded

Part Number

MS3057-3A

MS3057-4A

MS3057-6A

MS3057-8A

MS3057-10A

MS3057-12A

MS3057-16A

MS3057-20A

MS3057-24A

MS3057-28A

MS3057-32A

MS3057-40A

Fits

Shell Size

8S-10S

10SL, 12S, 12

14S, 14

16S, 16

18

20, 22

24, 28

32

36

40

44

48

Accommodates

MS Bushings

MS3420-3

MS3420-4

MS3420-6

MS3420-8

MS3420-10

MS3420-12

MS3420-16,12

MS3420-20,16

MS3420-24,20

MS3420-32,28,24

MS3420-40,32,28

E

Min.

.102 (2.59)

.140 (3.56)

.195 (4.95)

.255 (6.48)

.285 (7.24)

.350 (8.89)

.468 (11.89)

.664 (16.87)

.694 (17.63)

.911 (23.14)

-

E

Max.

.250 (6.35)

.312 (7.92)

.438 (11.13)

.562 (14.27)

.625 (15.88)

.750 (19.05)

.938 (23.83)

1.250 (31.75)

1.375 (34.92)

1.625 (41.28)

1.875 (47.62)

2.375 (60.32)

L

±.031 (0.79)

.812 (20.62)

.875 (22.22)

.938 (23.83)

1.031 (26.19)

1.094 (27.79)

1.156 (29.36)

1.688 (42.88)

1.750 (44.45)

P

±0.31 (0.79)

.688 (17.48)

.812 (20.62)

.969 (24.61)

1.094 (27.79)

1.188 (30.18)

1.375 (34.92)

1.656 (42.06)

2.031 (51.59)

2.219 (56.36)

2.500 (63.50)

2.781 (70.64)

3.281 (83.34)

R

±0.31 (0.79)

.812 (20.62)

.875 (22.22)

1.062 (26.97)

1.156 (29.36)

1.250 (31.75)

1.496 (37.31)

1.688 (42.88)

2.031 (51.59)

2.281 (57.94)

2.688 (68.28)

2.938 (74.63)

3.500 (88.90)

A

Thread

1/2-28UNEF-2B

5/8-24UNEF-2B

3/4-20UNEF-2B

7/8-20UNEF-2B

1-20UNEF-2B

1-3/16-18UNEF-2B

1-7/16-18UNEF-2B

1-3/4-18UNS-2B

2-18UNS-2B

2-1/4-16UN-2B

2-1/2-16UN-2B

3-16UN-2B

MS Part

Number

MS3420-3

MS3420-4

MS3420-6

MS3420-8

MS3420-10

MS3420-12

MS3420-16

MS3420-20

MS3420-24

MS3420-28

MS3420-32

MS3420-40

Superceded

MS Part

Number

MS39056-1

MS39056-2

MS39056-3

MS39056-4

MS39056-5

MS39056-6

MS39056-7

MS39056-8

MS39056-9

MS39056-10

MS39056-11

MS39056-12

ITT Cannon

Part Number

CA18220-3

CA18220-4

CA18220-6

CA18220-8

CA18220-10

CA18220-12

CA18220-16

CA18220-20

CA18220-24

CA18220-28

CA18220-32

CA18220-40

Fits

Shell Size

8S-10S

10SL, 12S, 12

14S, 14

16S, 16

18

20, 22

24, 28

32

36

40

44

48

C

±0.16 (0.41)

.379 (9.63)

.505 (12.83)

.619 (15.72)

.744 (18.90)

.869 (22.07)

1.064 (27.03)

1.314 (33.38)

1.596 (40.54)

1.847 (46.91)

2.085 (52.96)

2.335 (59.31)

2.835 (72.01)

L

±0.31 (0.79)

2.875 (73.02)

2.750 (69.85)

2.625 (66.68)

2.500 (63.50)

2.375 (60.32)

2.250 (57.15)

2.125 (53.98)

2.000 (50.80)

1.875 (47.62)

1.750 (44.45)

1.625 (41.28)

1.500 (38.10)

R

±0.16 (0.41)

.130 (3.30)

.200 (5.59)

.312 (7.92)

.437 (11.10)

.562 (14.27)

.625 (15.88)

.750 (19.05)

.937 (23.80)

1.250 (31.75)

1.375 (34.92)

1.624 (41.25)

1.874 (47.60)

Telescoping bushing with

M85049/41 cable clamp

R

C

L

R

L

P

E

.063 A Thd.

2 Places

Safety Wires Holes

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 103

A-104 www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Connectors

Accessories

Plastic Protective Caps

Protective dust caps are designed to cover the

coupling and conduit ends of MS connectors

where there is a possibility of foreign matter

accumulating on the interior of the connector or

of damage to the threaded parts. Material is red

polyethylene. Plastic dust caps can be reused, but

are not intended to replace the standard

aluminum dust caps shown in preceding pages.

MS3106/MS3108

MS3100F,R MS3102F,R MS-F (only) F,R

Part Coupling Solder Coupling Solder Solder Coupling Solder

Number End Pot End End Pot End Pot End End Pot End

)19.11( 964.S8S8000-8540-520

025-0459-000 8S 8S, 10S 8S 8S, 10S

025-0460-000 10S, 10SL 10SL, 12S, 12 10S, 10SL 10SL, 12S, 12

025-0462-000 12S, 12 14S, 14 12S, 12 14S, 14

025-0463-000 14S, 14 16S, 16 14S, 14 16S, 16

81000-6640-520

02000-7640-520

220202000-8640-520

422222000-9640-520

82000-0740-520

23000-1740-520

63000-2740-520

04000-3740-520

44000-4740-520

84000-5740-520

025-0477-000 10S, 10SL

025-0478-000 12S, 12

025-0479-000 14S, 14

025-0480-000 16S, 16

025-0484-000 18

025-0486-000 22

025-0487-000 24

025-0488-000 28

025-0489-000 32

025-0490-000 36

025-0491-000 40

025-0492-000 44

025-0493-000 48

818461 ,S618161 ,S61000-8940-520

22 ,02226322 ,02000-9940-520

82 ,420442 ,42000-0050-520

2344822382000-1050-520

6323236323000-2050-520

0482 ,42630463000-3050-520

4422 ,02044404000-4050-520

84818484000-5050-520

028181000-7050-520

4242000-0150-520

025-0511-000 44 48 44

S8000-8060-520

21 ,S21 ,LS01000-9060-520

41 ,S41000-0160-520

61 ,S61000-1160-520

82000-2160-520

23000-3160-520

63000-4160-520

A

Max.

.673

.734

.848

.973

1.098

1.209

1.396

1.500

1.625

1.870

2.120

2.370

2.501

2.872

3.122

.802

.911

1.036

1.161

1.290

1.540

1.665

1.907

2.157

2.412

2.672

2.922

3.172

1.240

1.427

1.677

1.985

2.245

2.495

2.742

3.257

1.365

1.740

3.007

.643

.829

.954

1.079

1.839

2.089

2.376

B

Max.

.440

.700

.491

.571

.576

.700

.440

.700

C

Max.

.430

.490

.600

.730

.850

.950

1.150

1.240

1.360

1.610

1.860

2.110

2.310

2.590

2.840

.550

.669

.794

.919

1.028

1.278

1.403

1.645

1.895

2.140

2.390

2.640

2.890

.990

1.117

1.420

1.730

1.980

2.230

2.480

2.980

1.110

1.490

2.730

.400

.580

.710

.830

1.570

1.820

2.010

D

Max.

.486

.546

.656

.786

.908

1.016

1.216

1.306

1.426

1.676

1.926

2.176

2.380

2.660

2.910

.616

.725

.850

.975

1.094

1.344

1.469

1.711

1.961

2.216

2.466

2.716

2.966

1.056

1.183

1.486

1.796

2.046

2.296

2.546

3.046

1.176

1.556

2.796

.456

.636

.766

.886

1.626

1.876

2.066

E

Max.

.583

.644

.758

.883

1.008

1.119

1.308

1.405

1.530

1.775

2.025

2.275

2.491

2.772

30.22

.712

.821

.946

1.071

1.195

1.445

1.570

1.812

2.062

2.317

2.572

2.822

3.072

1.150

1.337

1.587

1.895

2.155

2.400

2.652

3.157

1.275

1.650

2.907

.553

.739

.864

.989

1.744

1.994

2.231

Wt.

Lb.

.0012

.0014

.0022

.0028

.0033

.0042

.0054

.0060

.0067

.0087

.0103

.0141

.0164

.0186

.0222

.0017

.0022

.0027

.0033

.0044

.0058

.0066

.0084

.0102

.0132

.0163

.0186

.0213

.0044

.0055

.0072

.0095

.0114

.0134

.0186

.0233

.0050

.0077

.0220

.0011

.0021

.0028

.0032

.0088

.0100

.0132

Dimensions

025-XXXX-000

A

B

CDE

.06

.13

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 104

A-105

www.ittcannon.com

Dimensions shown in inches (mm)

Specifications and dimensions subject to change

Circular

A

MIL-DTL-5015 Connectors

Accessories

F80 Assembly Instructions

ITT Cannon provides a complete line of crimp insertion and extraction tooling to be used

with CA-F80 contacts as follows.

Contact Hand Crimp Power Crimp Crimp

Size Tool* Locator Tool* Head Locator Gauge

16 M-2252/1-01 TH-70-1 CBT-530

12 M-2252/1-01 TP567 CBT-600/600B CCH-12-7 CCHP-12-2 -

8 - - CBT-600/600B CCH-8-1 CCHP-8-1 CCH-8-1

4 - - CBT-600/600B CCH-4-1 CCHP-4-1 CCH-4-1

0 - - CBT-600B CCH-0-1 CCHP-0-9 CCH-0

*The M-22520/1-01 is the MIL standard crimp tool for #12 thru #20 contacts and when

used with crimp #12, 16 and 20 contacts for the CA-F80.

**The CBT-600 is recommended for crimping of #4 thru #12 contacts. The CBT-600B for

#0 thru #8. The appropriate locators and crimp heads are available as shown above.

Crimp Tool

Crimping Contacts

1. Check the crimp tool to be sure that the proper crimp

head locator is used.

2. Cycle to tool to be sure the indentors are open.

3. Place the contact, mating end first, into the tool.

4. Insert the stripped wire into the hollow end of the

contact. Be sure the wire is inserted as far as it will

go.

5. Close the tool completely to crimp. Unless the tool is

closed completely, the tool will not release the

contact.

6. Remove the crimped contact from the tool. Check the

inspection hole to verify that the wire is fully inserted.

Insertion/Extraction Tools

Insertion and extraction tools used for these connectors

are available for contact sizes 16 thru 0 as shown.

Contact Insertion Extraction Handle

Size Tools Tools Color

16 CIT-16 CET-16-4 Blue

(038895-0000) (038888-0004)

12 CIT-12 CET-12-2 Yellow

(038896-0000) (038890-0002)

8 CIT-8 CET-8 Red

4 CIT-4 CET-4 Blue

0 CIT-0 CET-0 Yellow

Insertion of Contacts

1. Before inserting the contacts, remove the endbell,

grommets, and ferrule from the receptacle. Remove

the endbell, grommet, ferrule, and coupling nut from

the plug. Slide the hardware over the wire bundle in

the proper order for reassembly after all the contacts

are inserted.

2. To assist insertion of contacts, lubricate insert cavities

with isopropyl alcohol. Alcohol will evaporate and

will not leave a conductive film. Caution: Never use

any lubricant other than isopropyl alcohol. Hold the

plug or receptacle body firmly and insert the wired

contacts as far as possible by hand. Starting at one

side of the insulator, work progressively from contact

to contact across the layout. When inserting socket

contacts, be sure to provide fixture space below the

front face to permit length of guide pins for #16 and

#12 contacts to clear insulator face.

3. Place the correct insertion tool on the contact so that

the wire runs along the groove in the tool. (Tool tip

will butt against the shoulder.)

4. Beginning with a cavity on the outer edge of the plug,

apply a slow, even pressure perpendicular to the

insulator face until the contact snaps into position. If

contacts are not inserted all the way prior to

removing insertion tool, do not try to reinsert the

insertion tool. Instead, using the extraction tool, push

the contact back to the position it was in when the

insertion tool was originally placed over the contact

for push-in; otherwise the inside of contact cavity

may be damaged by reinserting the insertion tool.

5. Inspect the front end of the insulator to assure that

the contacts are inserted to the proper depth.

Completion

After all the cavities have been filled, slide the hardware

back into position on the barrel. Tighten the endbell

until the ferrule and endbell are flush. Compression of

the grommet in this manner results in maximum sealing

characteristics of the plug.

Extraction of Contacts

1. Select the appropriate tool. (Tool tips are reversible for

either pin or socket.) Place the extraction tool over the

pin or into the socket.

2. Apply a slow, even pressure to push the contact out

of the rear of the insulator.

Recommended Wire Stripping

Contacts

Contact Part Numbers

F80

Contact Size Pin Socket

16S 330-0345-016 031-0554-161

16 330-0351-016 031-0560-161

12 330-0351-012 031-0560-121

8 330-0351-008 031-0560-081

4 330-0351-004 031-0560-041

0 330-0351-000 031-0560-001

Guide Pins

Guide pins are used to assist insertion of socket contact

Sizes #16 and #12. Larger sizes do not require guide

pins.

Contact Guide Pin

#16 226-1017-000

#12 226-1018-000

Wire Hole Fillers

Wire ITT Cannon

Size AWG Part Number Color

20 225-1000-000 Red

16/16S 225-0017-000 Blue

12 225-0018-000 Yellow

8 225-0019-000 White

4 225-8502-000 Green

0 225-8503-000 Black

035/025-TBC006-TBC

SIZE 16

SIZE 8

SIZE 0

SIZE 4

SIZE 12

1/4" 1/4"

7/16"

11/16"

5/8"

ca_A1-A163.qxd:Layout 1 2/9/11 7:50 PM Page 105