For surface mounted applications in order to optimize board space.
Low profile package.
Built-in strain relief.
Glass passivated junction.
Low inductance.
Excellent clamping capability.
Repetition Rate (duty cycle): 0.01%.
Fast response time: typically less than 1.0ps from 0 volt to BV for unidirectional types.
Typical IRless than 1µA.
High Temperature soldering: 260°C/10 seconds at terminals.
M
Case: JEDEC DO-214AB. Molded plastic over glass passivated junction.
Terminal: Solder plated, solderable per MIL-STD-750, Method 2026.
Polarity: Color band denotes cathode except Bidirectional.
Standard Packaging: 16mm tape (EIA STD RS-481).
Weight: 0.007 ounce, 0.21 grams.
M
Ng. 2.
. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal.
3.es maximum.
SMC/DO-214AB
Ratings at 25 ambient temperature unless otherwise specified.
Transient Voltage Suppressors
60'- Series MERITEK
FEATURES
MECHANICAL DATA
°C
MAXIMUM RATINGS AND CHARACTERISTICS
Notes: 1. Non-repetitive current pulse, per Fig. 3and derated above TA=25Ser Fig. 2.
2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle = 4 pulses per minute maximum.
RATING SYMBOL VALUE UNIT
Peak Pulse Power Dissipation on 10/1000 s waveform.
(Note 1, Note 2, Fig. 1) PPPM Minimum 5,000 Watts
Peak Pulse Current on 10/1000 s waveform. (Note 1, Fig. 3) IPPM See Table Amps
Steady State Power Dissipation at TL=75 , Lead lengths .375”
(9.5mm).(Note 2, Fig. 5) PM(AV) 6.5 Watts
Peak Forward Surge Current,8.3ms Single Half Sine-Wave
Superimposed on Rated Load.(JEDEC Method) (Note 3, Fig. 6) IFSM 300 Amps
Operating junction and Storage Temperature Range. TJ,T
STG -65 to +150
&
&
&
All specifications are subject to change without notice.
1
Rev 7
Part Number Device
Marking Code
Reverse
Stand-Off
Voltage
Breakdown
Voltage
@IT
Breakdown
Voltage
@IT
Test
Current
Maximum
Clamping
Voltage
@IPP
Peak
Pulse
Current
Reverse
Leakage
@VRWM
UNI-POLAR BI-POLAR UNI BI VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(µA)
5.0SMDJ11A 5.0SMDJ11CA 5PEN 5BEN 11.0 12.20 13.50 10 18.2 275.00 800
5.0SMDJ12A 5.0SMDJ12CA 5PEP 5BEP 12.0 13.30 14.70 10 19.9 252.00 800
5.0SMDJ13A 5.0SMDJ13CA 5PEQ 5BEQ 13.0 14.40 15.90 10 21.5 233.00 500
5.0SMDJ14A 5.0SMDJ14CA 5PER 5BER 14.0 15.60 17.20 10 23.2 216.00 200
5.0SMDJ15A 5.0SMDJ15CA 5PES 5BES 15.0 16.70 18.50 1 24.4 205.00 100
5.0SMDJ16A 5.0SMDJ16CA 5PET 5BET 16.0 17.80 19.70 1 26.0 193.00 50
5.0SMDJ17A 5.0SMDJ17CA 5PEU 5BEU 17.0 18.90 20.90 1 27.6 181.00 20
5.0SMDJ18A 5.0SMDJ18CA 5PEV 5BEV 18.0 20.00 22.10 1 29.2 172.00 10
5.0SMDJ20A 5.0SMDJ20CA 5PEW 5BEW 20.0 22.20 24.50 1 32.4 155.00 5
5.0SMDJ22A 5.0SMDJ22CA 5PEX 5BEX 22.0 24.40 26.90 1 35.5 141.00 5
5.0SMDJ24A 5.0SMDJ24CA 5PEZ 5BEZ 24.0 26.70 29.50 1 38.9 129.00 5
5.0SMDJ26A 5.0SMDJ26CA 5PFE 5BFE 26.0 28.90 31.90 1 42.1 119.00 5
Millimeters Inches
Item Min. Max. Min. Max.
L 6.60 7.11 0.260 0.280
D 5.59 6.22 0.220 0.245
D1 2.90 3.20 0.114 0.126
T 7.75 8.13 0.305 0.320
T1 0.76 1.52 0.030 0.060
d - 0.203 - 0.008
s 2.06 2.62 0.079 0.103
t 0.152 0.305 0.006 0.012
t
s
T1
d
T
D1 D
L
Cathode Band
SMC/DO-214AB
Transient Voltage Suppressors
60'- Series MERITEK
PACKAGE DIMENSIONS
SPECIFICATIONS
2
Rev 7
Part Number Device
Marking Code
Reverse
Stand-Off
Voltage
Breakdown
Voltage
@IT
Breakdown
Voltage
@IT
Test
Current
Maximum
Clamping
Voltage
@IPP
Peak
Pulse
Current
Reverse
Leakage
@VRWM
UNI-POLAR BI-POLAR UNI BI VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(µA)
5.0SMDJ28A 5.0SMDJ28CA 5PFG 5BFG 28.0 31.10 34.40 1 45.4 110.00 5
5.0SMDJ30A 5.0SMDJ30CA 5PFK 5BFK 30.0 33.30 36.80 1 48.4 103.00 5
5.0SMDJ33A 5.0SMDJ33CA 5PFM 5BFM 33.0 36.70 40.60 1 53.3 93.90 5
5.0SMDJ36A 5.0SMDJ36CA 5PFP 5BFP 36.0 40.00 44.20 1 58.1 86.10 5
5.0SMDJ40A 5.0SMDJ40CA 5PFR 5BFR 40.0 44.40 49.10 1 64.5 77.60 5
5.0SMDJ43A 5.0SMDJ43CA 5PFT 5BFT 43.0 47.80 52.80 1 69.4 72.10 5
5.0SMDJ45A 5.0SMDJ45CA 5PFV 5BFV 45.0 50.00 55.30 1 72.7 68.80 5
5.0SMDJ48A 5PFX 48.0 53.30 58.90 1 77.4 64.70 5
5.0SMDJ51A 5PFZ 51.0 56.70 62.70 1 82.4 60.70 5
5.0SMDJ54A 5RGE 54.0 60.00 66.30 1 87.1 57.50 5
5.0SMDJ58A 5PGG 58.0 64.40 71.20 1 93.6 53.50 5
5.0SMDJ60A 5PGK 60.0 66.70 73.70 1 96.8 51.70 5
5.0SMDJ64A 5PGM 64.0 71.10 78.60 1 103.0 48.60 5
5.0SMDJ70A 5PGP 70.0 77.80 86.00 1 113.0 44.30 5
5.0SMDJ75A 5PGR 75.0 83.30 92.10 1 121.0 41.40 5
5.0SMDJ78A 5PGT 78.0 86.70 95.80 1 126.0 39.70 5
5.0SMDJ85A 5PGV 85.0 94.40 104.00 1 137.0 36.50 5
5.0SMDJ90A 5PGX 90.0 100.00 111.00 1 146.0 34.30 5
5.0SMDJ100A 5PGZ 100.0 111.00 123.00 1 162.0 30.90 5
5.0SMDJ110A 5PHE 110.0 122.00 135.00 1 177.0 28.30 5
5.0SMDJ120A 5PHG 120.0 133.00 147.00 1 193.0 26.00 5
5.0SMDJ130A 5PHK 130.0 144.00 159.00 1 209.0 24.00 5
5.0SMDJ150A 5PHM 150.0 167.00 185.00 1 243.0 20.60 5
5.0SMDJ160A 5PHP 160.0 178.00 197.00 1 259.0 19.30 5
5.0SMDJ170A 5PHR 170.0 189.00 209.00 1 275.0 18.20 5
Note: For Bidirectional type having VRWM of 10 volts and less, the IR limit doubles.
Transient Voltage Suppressors
60'- Series MERITEK
3
Rev 7
0.1
1
10
100
1000
0.000001 0.00001 0.0001 0.001
t
d
-Pulse Width (Sec.)
P
PPM
-Peak Pulse Power (KW)
0.0000001
0
20
40
60
80
100
0 25 50 75 100 125 150 175
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
TA - Ambient Temperature (ºC)
I
PPM - Peak Pulse Current, % I
RSM
0
0
50
100
150
1.0 2.0 3.0 4.0
t
r=10µsec
Peak Value
I
PPM
I
PPM
2
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of I
PPM
10/1000µsec. Waveform
as defined by R.E.A
t
d
t-Time (ms)
Half Value
I
PPM ( )
1
10
100
1000
10000
100000
1.0 10.0 100.0 1000.0
Cj (pF)
VBR - Reverse Breakdown Voltage (V)
Bi-directional V
= OV
Uni-directional
@ VR
Bi-directional
@ VR
Uni-directional V
= OV
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
0 25 50 75 100 125 150 175
PM(AV), Steady State Power Dissipation (W)
TA-Ambient Temperature (ºC) 1 10 100
Number of Cycles at 60 Hz
0
50
100
150
200
250
300
350
IFSM - Peak Forward Surge Current (A)
Transient Voltage Suppressors
60'- Series MERITEK
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance
Figure 5 - Steady State Power Dissipation Derating Curve
Figure 6 - Maximum Non-Repetitive Forward
Surge Current Uni-Directional Only
RATING AND CHARACTERISTIC CURVES (TA: 25°C UNLESS OTHERWISE SPECIFIED)
4
Rev 7