IPL Linear Position Sensor * * * * High Life Cycle High Temperature Capability IP65 Dust Proof, Water Proof (Intense Spray) Compact design Variohm IPL linear sensors combine a robust and sealed membrane type linear potentiometer element in a convenient support housing that makes installation straightforward. The compact IPL series, available from 25 mm to 500 mm stroke provides accurate linear measurement feedback for a wide range of applications. Specifications Mechanical Typical Life Cycle (membrane element) >10 million Actuation force 3.0 N average Environmental Operating temperature -40C to +85C Humidity No affect @ 95% RH, 24hrs 60C IP rating of active area IP65 Electrical Resistance - Standard 10 k (lengths >300 = 20 k) Resistance - Custom 5k to 100 k Resistance Tolerance 20% Effective Electrical Travel 25 to 500 mm Linearity (Independent) 3% (1% on request) Repeatability +/- 0.5 mm Power Rating (depending on size, varies with length and temperature) 1 Watt max. @ 25C, 0.5 Watt recommended Resolution Analog output theoretically infinite; affected by variation of contact wiper surface area. Dielectric Value 1 2 3 PD1070-04 B No affect @ 500VAC for 1 4 minute 5 6 7 8 This drawing/or document is copyright and the property of Variohm Eurosensor Limited. It must not be copied (in whole or in part), used for manufacture or otherwise disclosed without prior written consent of the company. Any copies of this drawing made by any method must also include a copy of this legend. (c) Variohm Eurosensor Limited 2012. A Dimensions - IPL A B ACTIVE LENGTH 'A' 25 B B TAIL LENGTH 'T' B 20.70 28.10 15.825 WIPER CENTRELINE B 8 25 9.24 3.175 C C 3.4 7 5 7 25 2 m6 E Dimension A - Active Length in mm 25.00 50.00 100.00 200.00 B See B.O.M. 12.7 mm Mod. No. +/- 0,2mm 24.9mm 2 3 4 Description. Name RJK Drawn Checked Eng. Appr. None Mfg. Appr. Do not scale drawing Title, Supplementary title IPL Narrow Hotpot - 50mm 1 Saved 29/07/13 by Richard.Kelley +/- 0,5 Treatment 500.00 9.24 Dim. was 10, 15.825 Dim. was 11.1, 3.175 Dim.a was 7.9. Initial Issue General tolerance Material Dimension T - Tail F Length in mm - A Revision 5 6 Date 25/06/13 Scale 1:1 Sheet 1 of 1 Q.A. Drawing number 7 29/07/13 RJK 25/06/13 RJK Date Name Document type ASSEMBLY Document status PRELIMINARY Rev. PD1070-04 B A3 ILP Position Sensor 13/07 9.10 E 16 12.50 2.5 8.6 14.6 D 1.90 M5 X 0.8 - 6H D F IPL Linear Position Sensor Wiring Membrane cross section Ordering information (Please use the characters in the chart below to construct your product code) Sample Code: IPL - 0050 - 103 - 3% - ST Crimpflex Solder Tab (ST) Series Active Length mm Resistance Independant Linearity Connectors 0012 = 12.5 0025 = 25 0050 = 50 Crimpflex Short Male Pins (MP) 0100 = 100 ST = Solder Tab 0150 = 150 0170 = 170 IPL 0200 = 200 0300 = 300 Active Lengths < 300 103 = 10 K Active Lengths > 300 203 = 20 K 0400 = 400 MP = Male Pins 3% = 3% (1% on request) RH = Receptacles w/Plain Housing RL = Receptacles w/Latch Housing RD = Receptacles w/Detent Housing Crimpflex Female Receptacles with a Plain Housing (RH) 0500 = 500 0750 = 750 1000 = 1000 Crimpflex Female Receptacles with a Latch Housing (RL) Standard options in bold type - other available options Custom options available on request Variohm EuroSensor - Williams` Barn - Tiffield Road -Towcester - Northants -NN12 6HP - UK sales@variohm.com * www.variohm.com * +44 (0) 1327 351004 Subject to change without notice ILP Position Sensor 13/07 Crimpflex Female Receptacles with a Detent Housing (RD)