Document 333-1 SMT Power Inductors - LPO6610 Series This series has been specially designed for applications requiring a very small footprint and the lowest possible height: notebook computers, PDAs, PC Cards, mobile phones and other handheld products. Despite their low profile (1 mm) these inductors offer excellent current handling - up to 2.1 A. They are available in 16 inductance values from 1.2 to 330 H. Coilcraft Designer's Kit C367 contains samples of all values shown. To order, contact Coilcraft or purchase on-line at http://order.coilcraft.com. Part number1 LPO6610-122ML_ LPO6610-152ML_ LPO6610-222ML_ LPO6610-332ML_ LPO6610-472ML_ LPO6610-682ML_ LPO6610-103ML_ LPO6610-153ML_ LPO6610-223ML_ LPO6610-333ML_ LPO6610-473ML_ LPO6610-683ML_ LPO6610-104ML_ LPO6610-154ML_ LPO6610-224ML_ LPO6610-334ML_ L2 DCR 20% max (H) (Ohms) 1.2 0.08 1.5 0.10 2.2 0.12 3.3 0.16 4.7 0.20 6.8 0.32 10 0.41 15 0.55 22 0.85 33 1.3 47 1.8 68 2.5 100 3.5 150 5.0 220 7.0 330 15.0 SRF typ (MHz) 190 140 115 90 88 66 55 42 38 29 22 18 14 12 10 8 1. When ordering, please specify termination and packaging codes: Isat3 (A) 2.1 1.9 1.6 1.3 1.1 0.90 0.80 0.65 0.50 0.40 0.35 0.30 0.25 0.18 0.16 0.13 Irms4 (A) 1.7 1.5 1.4 1.2 1.1 0.85 0.75 0.60 0.52 0.42 0.36 0.30 0.26 0.21 0.18 0.13 LPO6610-334MLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DC current at which the inductance drops 10% (typ) from its value without current. 4. Current that causes a 40C temperature rise from 25C ambient. 5. Ambient temperature range: -40C to +85C with Irms current +85C to +125C with derated current 6. Storage temperature range: Component: -55C to +85C Packaging: -55C to +80C 7. Resistance to soldering heat: Three reflows at >217C for 90 seconds (+260C 5C for 20 - 40 seconds), allowing parts to cool to room temperature between. 8. Electrical specifications at 25C. See Qualification Standards section for environmental and test data. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Specifications subject to change without notice. Please check our website for latest information. (c) Coilcraft, Inc. 2007 Document 333-1 Revised 04/24/07 Document 333-2 SMT Power Inductors - LPO6610 Series Typical L vs Frequency Typical L vs Current 1000 1000 100 H Inductance (H) Inductance (H) 100 H 100 100 10 H 10 10 H 10 1.2 H 1.2 H 1 1 0.1 0.1 0.01 1 0.1 10 0.01 10 Current (A) Irms Derating Dash number 0.270 6,90 XXX 120 110 X 100 90 0.100 2,50 0.150 3,80 0.185 4,70 Internal code 80 0.040 0.004 1,00 0,10 70 Recommended Land Pattern 60 50 0.192 4,90 40 25C Percent of rated Irms 1 0.1 Frequency (MHz) 30 0.029 0,750 20 0.216 max 5,50 10 0.100 2,54 0.134 3,40 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (C) 0.260 max 6,60 Terminations: Silver-palladium-platinum-glass frit Weight: 91.0 - 95.0 mg Tape and reel: 1000/7 reel 12 mm tape width For packaging data see Tape and Reel Specifications section. Specifications subject to change without notice. Please check our website for latest information. (c) Coilcraft, Inc. 2007 Document 333-2 Revised 04/24/07