© Coilcraft, Inc. 2007
Specifications subject to change without notice.
Please check our website for latest information.
SMT Power Inductors - LPO6610 Series
Document 333-1
Document 333-1 Revised 04/24/07
This series has been specially de-
signed for applications requiring a very
small footprint and the lowest pos-
sible height: notebook computers,
PDAs, PC Cards, mobile phones and
other handheld products.
Despite their low profile (1 mm) these
inductors offer excellent current han-
dling – up to 2.1 A. They are available in 16 inductance
values from 1.2 to 330 µH.
Coilcraft Designer’s Kit C367 contains samples of all
values shown. To order, contact Coilcraft or purchase
on-line at http://order.coilcraft.com.
L2DCR SRF
±20% max typ Isat3Irms4
Part number1(µH) (Ohms) (MHz) (A) (A)
LPO6610-122ML_ 1.2 0.08 190 2.1 1.7
LPO6610-152ML_ 1.5 0.10 140 1.9 1.5
LPO6610-222ML_ 2.2 0.12 115 1.6 1.4
LPO6610-332ML_ 3.3 0.16 90 1.3 1.2
LPO6610-472ML_ 4.7 0.20 88 1.1 1.1
LPO6610-682ML_ 6.8 0.32 66 0.90 0.85
LPO6610-103ML_ 10 0.41 55 0.80 0.75
LPO6610-153ML_ 15 0.55 42 0.65 0.60
LPO6610-223ML_ 22 0.85 38 0.50 0.52
LPO6610-333ML_ 33 1.3 29 0.40 0.42
LPO6610-473ML_ 47 1.8 22 0.35 0.36
LPO6610-683ML_ 68 2.5 18 0.30 0.30
LPO6610-104ML_ 100 3.5 14 0.25 0.26
LPO6610-154ML_ 150 5.0 12 0.18 0.21
LPO6610-224ML_ 220 7.0 10 0.16 0.18
LPO6610-334ML_ 330 15.0 8 0.13 0.13
1. When ordering, please specify termination and packaging codes:
LPO6610-334MLC
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel).
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc.
3. DC current at which the inductance drops 10% (typ) from its value
without current.
4. Current that causes a 40°C temperature rise from 25°C ambient.
5. Ambient temperature range:
–
40°C to +85°C with Irms current
+85°C to +125°C with derated current
6. Storage temperature range: Component:
–
55°C to +85°C
Packaging:
–
55°C to +80°C
7. Resistance to soldering heat: Three reflows at >217°C for 90 seconds
(+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room
temperature between.
8. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2007
Specifications subject to change without notice.
Please check our website for latest information.
SMT Power Inductors - LPO6610 Series
Typical L vs Frequency Typical L vs Current
Document 333-2
Document 333-2 Revised 04/24/07
0.1
1
10
100
1000
0.01 0.1 110
Current (A)
Inductance (µH)
10 µH
100 µH
1.2 µH
0.1
1
10
100
1000
0.01 0.1 110
Frequency (MHz)
Inductance (µH)
10 µH
100 µH
1.2 µH
0.216
5,50 max
0.040 ±0.004
1,00 ±0,10
0.260
6,60 max
0.029
0,750
Dash number
Internal code
0.192
4,90
0.134
3,40
0.100
2,54
0.185
4,70
0.100
2,50
0.150
3,80
0.270
6,90
Recommended
Land Pattern
XXX
X
Terminations: Silver-palladium-platinum-glass frit
Weight: 91.0 – 95.0 mg
Tape and reel: 1000/7″ reel 12 mm tape width
For packaging data see Tape and Reel Specifications section.
Irms Derating
-40 -20 0 20 40 60 80 100 140120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
25°C
Percent of rated rmsI
