Cylindrical High Power Surface Mount Metal GlazeTM CHP CHP Series Metal GlazeTM thick fi lm element fi red at 1000C to solid ceramic High Power *Cylindrical Up to 2 watts Metal GlazeTM *Surface Up to 1000Mount volts * 0.2 ohm to 2.2 megohm range * RoHS-compliant version available s Up to 2 watts * 150C maximum operating temperature s Up to 1000 volts Metal GlazeTM thick film element fired at 1000C to solid ceramic s 0.2 ohm to 2.2 megohm range s RoHS-compliant version available Solder over nickel barrier s 150C maximum operating temperature High temperature dielectric coating High temperature dielectric coating Solder over nickel barrier Electrical Data IRC Type Industry Footprint Size Code1 Maximum Power Rating Working Voltage Maximum Voltage Resistance Range (ohms) Product Category Tolerance (%) 0.1 to 0.99 Low Range 1, 2, 5 100 CHP 1/8 1206 B&C 1/4W @ 70C 200 400 1.0 to 1.0 M Standard 1, 2, 5 50, 100 20 to 348K Tight Tolerance 0.25, 0.5 50, 100 CHP 1/2 CHP 1 CHP 2 2010 D&E 2512 3610 1/2W @ 70C F H 1W @ 70C 2W @ 25C 1.33W @ 70C 300 350 500 600 700 1000 See pages 2 & 3 for product dimensions, recommended solder pads, and standard packaging. TCR (ppm/C) 0.1 to 0.99 Low Range 1, 2, 5 100 1.0 to 348K Standard 1, 2, 5 50, 100 0.1 to 0.99 Low Range 1, 2, 5 100 1.0 to 2.21M Standard 1, 2, 5 50, 100 20 to 348K Tight Tolerance 0.25, 0.5 50, 100 0.2 to 0.99 Low Range 1, 2, 5 100 Standard 1, 2, 5 50, 100 1.0 to 2.21M Not to exceed P x R Consult factory for tighter TCR, tolerance, or resistance values. Environmental Data Characteristics Characteristics Maximum MaximumChange Change Test Method Test Method Thermal Shock Temperature Coefficient +.01 As0.25% specified MIL-PRF-55342H, 4.8.3 MIL-R-55342H ParMethod 3.16 (-55C 125C) / -65C) (MIL-STD-202, 107G:+ +150C Thermal Shock Operation Low Temperature 0.5% + 0.01 0.25% +.01ohm MIL-PRF-55342H, 4.8.5 MIL-R-55342H Par 3.9 (-65C + 150C, 5 cycles) Low Temperature Operation 0.25% 0.01ohm 0.5%++.01 MIL-R-55342H Par 3.11 (-65C @ working voltage) Short Time Overload (-65C) MIL-PRF-55342H, 4.8.6 1% for R>100K 0.5% + 0.01 ohm 1% for R>100K ohm MIL-R-55342H Par 3.12 2.5 x P x R for 5 seconds MIL-PRF-55342H, 4.8.7 High Temperature Exposure 0.5% + 0.01 ohm MIL-R-55342H Par 3.13 (-150C for 100 hours) Resistance to Bonding 0.25% + 0.01 ohm MIL-R-55342H Par 3.14.2 (Reflow soldered to board at 260C for 10 seconds) MIL-PRF-55342H, 4.8.8.2 Exposure 95% minimum coverage MIL-STD-202, Method 208 (245C for 5 seconds) Short Time Overload High Temperature Exposure Resistance to Bonding Exposure Moisture Resistance Temperature Coefficient 0.5% +.01 0.25% +.01 0.5% +.01 As specified (150C x 100 Hours) MIL-PRF-55342H, 4.8.8.2 (MIL-STD-202, Method 106G) MIL-PRF-55342H, 4.8.10 Solderability 0.5% + 0.01 ohm (MIL-STD-202, 304) MIL-R-55342H ParMethod 3.18 (10 cycles, total 240 hours) Life Test Resistance Moisture 1% +.01 ohm 0.5% + 0.01 MIL-R-55342H ParMethod 3.15 (2000 hours at 70C (MIL-STD-202, 108A: 2000 Hoursintermittent) @ 70C) Life Test Solderability 1% 0.01 ohm coverage 95%+ minimum no mechanical damage 1200 gram push from underside (MIL-STD-202, Method 208H)of mounted chip for 60 seconds Terminal Adhesion Strength MIL-PRF-55342H, 4.8.11 MIL-PRF-55342H, 4.8.12 1% +.01 IRCmounted - defined Chip in center of 90mm long board, deflected 1mm so as to Terminal Adhesion Strength (push) 1% + 0.01 ohm mechanical damage) exert 1200 gram pushcontacts from underside of mounted device for 60 sec no(no mechanical damage pull on chip for 5 seconds IRC-defined 1% +.01 General Note Terminal Strength Device mounted in center of 90mm long board, deflected 1 mm to exert IRC reserves theAdhesion right to make changes in product(flex) specification(no withoutmechanical notice or liability. damage) All information is subject to IRC's own data and is considered accurate at time of going to print. pull on contacts for 5 seconds A subsidiary of (c) IRC Wire and Film Technologies Division s 3OUTH 3TAPLES 3TREET s #Orpus Christi TeXAS 53! Telephone: s Facsimile: s Website: www.irctt.com General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. TT electronics plc #(0 3Eries Issue March 3HEET OF www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 09.12 CHP Cylindrical High Power Surface Mount Metal GlazeTM Cylindrical High Power Surface Mount Metal GlazeTM CHP Series Physical Data L C W Dimensions (Inches and (mm)) IRC Type Size Code Industry Footprint CHP 1/8 B 1206 0.128 0.007 (3.25 0.18) 0.057 0.006 (1.45 0.15) 0.020 0.010 (0.51 0.25) MRC 1/2 C 1206 0.128 0.007 (3.25 0.18) 0.063 0.010 (1.60 0.25) 0.020 0.010 (0.51 0.25) CHP 1/2 D 2010 0.200 0.010 0.079 (nom.) -0.006 / +0.011 (2.01 (nom.) -0.15 / +0.28) (5.08 0.25) 0.030 0.010 (0.761 0.25) CHP 1 F 2512 0.251 0.010 (6.38 0.25) 0.079 (nom.) -0.006 / +0.011 (2.01 (nom.) -0.15 / +0.28) 0.040 0.010 (1.02 0.25) CHP 2 H 3610 0.367 0.010 0.105 (nom.) -0.006 / +0.011 (2.67 (nom.) -0.15 / +0.28) (9.32 0.25) 0.050 0.010 (1.27 0.25) Actual Size L W C Recommended Solder Pad Dimensions (Reflow): F A C A B E D Size Code Industry Footprint B&C Dimensions (Inches and mm)) A B C D E F 1206 0.076 (1.93) 0.093 (2.36) 0.058 (1.47) 0.098 (2.49) 0.032 (0.81) 0.211 (5.36) D 2010 0.111 (2.82) 0.126 (3.20) 0.096 (2.44) 0.152 (3.86) 0.040 (1.02) 0.318 (8.08) E 2010 0.170 (4.32) 0.160 (4.06) 0.072 (1.83) 0.132 (3.35) 0.044 (1.12) 0.412 (10.46) F 2512 0.121 (3.07) 0.126 (3.20) 0.127 (3.23) 0.183 (4.65) 0.040 (1.02) 0.369 (9.37) H 3610 0.170 (4.32) 0.160 (4.06) 0.213 (5.41) 0.273 (6.93) 0.044 (1.12) 0.553 (14.05) (c) IRC Wire and Film Technologies Division s 3OUTH 3TAPLES 3TREET s #ORPUS #HRISTI TEXAS 53! TELEPHONE: s FACSIMILE: s WEBSITE: WWWIRCTTCOM #(0 3ERIES )SSUE -ARCH 3HEET OF General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 09.12 CHP Cylindrical High Power Surface Mount Metal GlazeTM Cylindrical High Power Surface Mount Metal GlazeTM CHP Series Standard Reel Packaging per EIA-481: IRC Type Size Code Industry Footprint CHP 1/8 MRC 1/2 B C 1206 CHP 1/2 MRC 1 D E 2010 CHP 1 F 2512 CHP 2 H 3610 Reel Diameter* Quantity Per Reel 7 2,500 max. 13 10,000 max. 7 1,500 max. 13 5,000 max. 7 1,500 max. 13 5,000 max. 13 1,500 max. Carrier Tape Width Component Pitch 8mm 4mm 12mm 4mm 12mm 4mm 24mm 4mm *The 13 reel is considered standard and will be supplied unless otherwise specified. Repetitive Surge Curve Power Derating Curve 100 1000 80 Peak Power (watts) % of Rated Power CHP 1/8, 1/2, 1 60 CHP 2 40 20 0 30 40 50 60 70 80 CHP 2 CHP 1 100 10 CHP 1/8 90 100 110 120 130 140 150 1 0.0001 Ambient Temperature (C) .1msec 0.0010 1msec 0.0100 10msec 0.1000 100msec 1.0000 10000msec Surge or Pulse Duration (seconds) Note: Use for repetitive pulses where the average power dissipation is not to exceed the component rating at 70C. Surge handling capacity for low-repetitive surges may be significantly greater than shown above. Contact factory for recommendations. Ordering Data Sample Part No. CHP 1 - 100 2203 F 13 LF IRC Type (CHP 1/8, CHP 1/2, CHP 1, or CHP 2) Temperature Coefficient (50 ppm, 100 ppm) Resistance Value (100 ohms and greater - First 3 significant digits plus 4th digit multiplier) Example: 100 ohms = 1000, 1000 ohms = 1001, 150,000 ohms = 1503 (Less than 100 ohms - "R" is used to designate decimal) Example: 51 ohms = 51R0, 1 ohm = 1R00, 0.25 ohms = R250 Tolerance (C = 0.25%, D = 0.5%, F = 1.0%; G = 2.0%; J = 5.0%) Packaging Code* (BLK = Bulk, 7 = 7" Reel, 13 = 13" Reel) Lead Free Construction (c) IRC Wire and Film Technologies Division s 3OUTH 3TAPLES 3TREET s #ORPUS #HRISTI TEXAS 53! TELEPHONE: s FACSIMILE: s WEBSITE: WWWIRCTTCOM #(0 3ERIES )SSUE -ARCH 3HEET OF General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 09.12