TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series FEATURES * Large case size for maximum capacitance * 3x reflow 260C compatible * Low profile solution * Consumer applications (e.g. PCMCIA/USB wireless express cards etc.) * CV range: 1000-3300F / 4-10V * 2 case sizes available LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS * Data transfer modems * SSD backup circuits CASE DIMENSIONS: millimeters (inches) Code EIA Code EIA Metric L0.20 (0.008) W+0.20 (0.008) -0.10 (0.004) WP0.10 (0.004) H max. WN0.10 (0.004) AP0.10 (0.004) AN0.10 (0.004) S Min. 4 2924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) 6 5831 14878-20 14.80 (0.583) 7.80 (0.307) 2.00 (0.079) 5.50 (0.217) 5.50 (0.217) 2.45 (0.096) 2.45 (0.096) 9.90 (0.390) MARKING 4, 6 CASE Capacitance Value in mF 228 = 2.2mF 228 J Polarity Band (Anode+) XXXXX W AVX LOGO ID Code HOW TO ORDER TLN 6 Type Polarity Band (Anode+) Rated Voltage J = 6.3V Case Size See table above L W H WP AP S AN WN 228 M 006 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier Tolerance M = 20% Rated DC Voltage 004 = 4Vdc 006 = 6.3Vdc 010 = 10Vdc R Packaging R = Pure Tin 7" Reel 0055 ESR in m TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Category Voltage (VC) Temperature Range: Reliability: 54 -55C +40C: at 85C: at 125C: All technical data relate to an ambient temperature of +25C 1000 F to 3300 F 20% 0.01CV 4 6.3 10 2 3.2 5 0.8 1.3 2 -55C to +125C with category voltage 0.2% per 1000 hours at 85C, 0.5xVR with 0.1/V series impedance with 60% confidence level 010418 TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series CAPACITANCE AND RATED VOLTAGE RANGE (FIGURE DENOTES CASE SIZE) Capacitance F 680 1000 1500 2200 3300 Voltage Rating DC (VR ) to 85C Code 687 108 158 228 338 4V (G) 6.3V (J) 4(100) 6(55) 10V (A) 4(100)/6(55) 6(55) 6(55) Released ratings (ESR ratings in mOhms in parentheses) Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Capacitance Size (F) Rated Rated Category Category Voltage Temperature Voltage Temperature (V) (C) (V) (C) TLN6338M004#0055 6 3300 4 40 TLN4158M006#0100 TLN6228M006#0055 4 6 1500 2200 6.3 6.3 40 40 TLN4108M010#0100 TLN6108M010#0055 TLN6158M010#0055 4 6 6 1000 1000 1500 10 10 10 40 40 40 4 Volt @ 40C 0.8 125 6.3 Volt @ 40C 1.3 125 1.3 125 10 Volt @ 40C 2 125 2 125 2 125 DCL Max. (A) ESR Max. @ 100kHz (m) 25C 85C 125C 132 55 2045 1840 818 3 90 132 100 55 1285 2045 1156 1840 514 818 3 3 100 100 150 100 55 55 1285 2045 2045 1156 1840 1840 514 818 818 3 3 3 100kHz RMS Current (mA) MSL Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalogue limit post mounting DCL allowed to move up to 2.00 times catalogue limit post mounting For typical weight and composition see page 269. NOTE: AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards. 010418 55 TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series QUALIFICATION TABLE TEST Endurance Humidity Temperature Stability TLN PulseCapTM series (Temperature range -55C to +125C) Condition Characteristics Visual examination no visible damage Apply rated voltage (Ur) at 40C and / or category voltage (Uc) at 85C for 2000 hours through a DCL 2 x initial limit circuit impedance of 0.1/V. Stabilize at room C/C within +5/-30% of initial value temperature for 1-2 hours before measuring. ESR 1.25 x initial limit Visual examination no visible damage Store at 65C and 90-95% relative humidity for 500 hours, with no applied voltage. Stabilize at DCL 2 x initial limit room temperature and humidity for 1-2 hours C/C within 10% of initial value before measuring. ESR 1.25 x initial limit Step 1 2 3 4 5 6 TemperatureC +20 -55 +20 +85 +125 +20 Duration(min) 15 15 15 15 15 15 Apply 1.3x rated voltage (Ur) at 40Cfor 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000 Surge Voltage DCL C/C ESR +20C -55C +20C +85C 2 x IL* n/a 2 x IL* 20 x IL* 25 x IL* 2 x IL* n/a +5/-20% 10% +20/-0% +25/-0% 10% 1.25 x IL* 2.5 x IL* +125C +20C 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* Visual examination no visible damage DCL 2 x initial limit C/C within 5% of initial value ESR 1.25 x initial limit *Initial Limit Voltage vs Temperature Rating rated range 120% recommended derating 100% 80% 100% 100% 80% 80% 60% 67% 50% 40% 33% 20% 0% -55C 56 20% 0C 40C 60C 85C 105C 125C 010418 TLN PulseCapTM Series High Capacitance Tantalum Solid Electrolytic Chip Capacitors Undertab Series AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONVENTIONAL SMD MnO2 010418 57