RCWPM (Military M/D55342) Vishay Dale Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM FEATURES * Fully conforms to the requirements of MIL-PRF-55342 * Established reliability - Verified failure rate; M, P, R, S and T levels * Operating temperature range is - 55 C to + 150 C * 100 % Group A screening per MIL-PRF-55342 * Termination Style B - Tin/Lead wraparound over nickel barrier * For MIL-PRF-32159 zero ohm jumpers, see Vishay Dale's RCWPM Jumper (Military M32159) data sheet STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL POWER RATING MIL-PRF-55342 MIL SPEC. TERM. P70 C W STYLE SHEET MAX. OPERATING VOLTAGE CHAR. TOLERANCE RESISTANCE % RANGE RCWPM-0502 RM0502 01 B 0.05 40 M K, M 2 to 10 1 to 10 1 to 9.1 10 to 22M RCWPM-550 RM0505 02 B 0.125 40 M K, M 2 to 10 1 to 10 1 to 9.1 10 to 22M RCWPM-5100 RM1005 03 B 0.20 75 M K, M 2 to 10 1 to 10 1 to 5.6 5.62 to 22M RCWPM-5150 RM1505 04 B 0.15 125 M K, M 2 to 10 1 to 10 1 to 5.6 5.62 to 22M RCWPM-7225 RM2208 05 B 0.225 175 M K, M 2 to 10 1 to 10 1 to 5.6 5.62 to 22M RCWPM-575 RM0705 06 B 0.15 50 M K, M 2 to 10 1 to 10 1 to 5.6 5.62 to 22M RCWPM-1206 RM1206 07 B 0.25 100 M K, M 2 to 10 1 to 10 1 to 5.6 5.62 to 22M RCWPM-2010 RM2010 08 B 0.80 150 M K, M 2 to 10 1 to 10 1 to 5.6 5.62 to 22M RCWPM-2512 RM2512 09 B 1.0 200 M K, M 2 to 10 1 to 10 1 to 5.6 5.62 to 22M RCWPM-1100 RM1010 10 B 0.50 75 M K, M 2 to 10 1 to 10 1 to 5.6 5.62 to 22M RCWPM-0402 RM0402 11 B 0.05 30 M K, M 2 to 10 1 to 10 1 to 9.1 10 to 22M RCWPM-0603 RM0603 12 B 0.10 50 M K, M 2 to 10 1 to 10 1 to 5.6 5.62 to 22M RCWPM-0302 RM0302 13 B 0.04 15 M K, M 2 to 10 1 to 10 1 to 9.1 10 to 22M Note * DSCC has created a series of drawings to support the need for 0201-sized product. Vishay Dale is listed as a resource on these drawing as follows: DSCC DRAWING NUMBER VISHAY DALE MODEL TERM. POWER RATING P70 C W RES. RANGE RES. TOL. % TEMP. COEF. ppm/C MAX. WORKING VOLTAGE 07009 RCWP-0201 B 0.05 47 to 1M 10 to 1M 1; 5 100 200 30 07010 RCWP-0201 B 0.05 47 to 1M 10 to 1M 1; 5 100 300 30 These drawings can be viewed at: www.dscc.dla.mil/Programs/MilSpec/listDwgs.asp?DocType=DSCCdwg www.vishay.com 130 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010 Revision: 25-Jul-08 RCWPM (Military M/D55342) Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342M02B10E0RWB (preferred part number format) M 5 5 3 4 MIL STYLE CHARACTERISTICS D55342 applies to Style 07 (RM1206) only. K = 100 ppm M = 300 ppm 2 SPEC SHEET M 0 2 B 1 TERMINATION VALUE AND STYLE TOLERANCE (see Standard B = Pre-tinned (see Tolerance Nickel Barrier, and Multipliers Electrical table) wraparound Specifications table) 0 E 0 FAILURE RATE R W PACKAGING C = Non-ER M = 1.0 %/1000 h P = 0.1 %/1000 h R = 0.01 %/1000 h S = 0.001 %/1000 h T = Space Level M55342 applies to all other styles. B SPECIAL Blank = Standard TP = Tin/Lead, (Dash Number) T/R (Full) (up to 1 digits) UL = Tin/Lead, T/R Single Lot Date Code T = Space S3 = Tin/Lead, Level (-98) T/R (1000 pieces) WB = Tin/Lead, Tray WL = Tin/Lead, Tray, Single Lot Date Code S2 = Tin/Lead, T/R (500 pieces) S6 = Tin/Lead, T/R (300 pieces) Historical Part Numbering: M55342M02B10E0R (will continue to be accepted) M55342 MIL STYLE M CHARACTERISTICS 02 B 10E0 R WB SPEC SHEET TERMINATION STYLE VALUE AND TOLERANCE FAILURE RATE PACKAGING CODE RESISTANCE TOLERANCE AND MULTIPLIERS TOLERANCE MULTIPLIER VALUE RANGE () 1% 2% 5% 10 % D G J M 1 1 - 9xx E H K N 1000 1K - 9xxK F T L P 1 000 000 1M - 22M Examples: Document Number: 31010 Revision: 25-Jul-08 11D3 = 11.3 1 % 10E0 = 10 k 1 % 332D = 332 1 % 2F21 = 2.21 M 1 % 51G0 = 51 2 % 10H0 = 10 k 2 % 33H0 = 33 k 2 % 22T0 = 22 M 2 % 15J0 = 15 5 % 10K0 = 10 k 5 % 560K = 560 k 5 % 8L20 = 8.2 M 5 % 10M0 = 10 10 % 10N0 = 10 k 10 % 2P70 = 2.7 M 10 % 8P20 = 8.2 M 10 % For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 131 RCWPM (Military M/D55342) Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM Vishay Dale DIMENSIONS in inches [millimeters] D C B A E VISHAY DALE MODEL MIL-PRF-55342 STYLE MIL. SPEC. SHEET A (Length) B (Width) C (Height) D (Top Term) E (Bottom Term) RCWPM-0502 RM0502 01 0.055 0.005 [1.40 0.13] 0.023 0.003 [0.58 0.08] 0.015 0.003 [0.38 0.08] 0.010 0.005 [0.25 0.13] 0.015 0.005 [0.38 0.13] RCWPM-550 RM0505 02 0.055 0.005 [1.40 0.13] 0.050 0.005 [1.27 0.13] 0.020 0.005 [0.51 0.13] 0.010 0.005 [0.25 0.13] 0.015 0.005 [0.38 0.13] RCWPM-5100 RM1005 03 0.105 0.005 [2.67 0.13] 0.050 0.005 [1.27 0.13] 0.020 0.005 [0.51 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] RCWPM-5150 RM1505 04 0.155 0.005 [3.94 0.13] 0.050 0.005 [1.27 0.13] 0.020 0.005 [0.51 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] RCWPM-7225 RM2208 05 0.230 0.005 [5.84 0.13] 0.075 0.005 [1.91 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] RCWPM-575 RM0705 06 0.080 0.005 [2.03 0.13] 0.050 0.005 [1.27 0.13] 0.020 0.005 [0.51 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] RCWPM-1206 RM1206 07 0.125 0.005 [3.18 0.13] 0.063 0.005 [1.60 0.13] 0.020 0.005 [0.51 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] RCWPM-2010 RM2010 08 0.197 0.006 [5.00 0.15] 0.098 0.005 [2.49 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] RCWPM-2512 RM2512 09 0.250 0.006 [6.35 0.15] 0.124 0.005 [3.15 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] 0.020 0.005 [0.51 0.13] RCWPM-1100 RM1010 10 0.105 0.005 [2.67 0.13] 0.100 0.005 [2.54 0.13] 0.020 0.005 [0.51 0.13] 0.015 0.005 [0.38 0.13] 0.015 0.005 [0.38 0.13] RCWPM-0402 RM0402 11 0.039 0.003 [0.99 0.08] 0.020 0.003 [0.51 0.08] 0.013 0.003 [0.33 0.08] 0.010 0.005 [0.25 0.13] 0.010 0.005 [0.25 0.13] RCWPM-0603 RM0603 12 0.063 0.005 [1.60 0.13] 0.032 0.005 [0.81 0.13] 0.018 0.005 [0.46 0.13] 0.012 0.005 [0.31 0.13] 0.015 0.005 [0.38 0.13] RCWPM-0302 RM0302 13 0.034 0.004 [0.86 0.10] 0.021 0.003 [0.53 0.08] 0.015 0.003 [0.38 0.08] 0.007 0.005 [0.18 0.13] 0.008 0.005 [0.20 0.13] 0.024 0.002 [0.60 0.05] 0.012 0.002 [0.30 0.05] 0.009 0.002 [0.23 0.05] 0.006 0.003 [0.15 0.07] 0.006 + 0.002 - 0.004 [0.15 + 0.05 - 0.10] Rated Power in % RCWP-0201 120 100 80 CAGE CODE: 91637 and SH903 60 40 20 0 - 55 - 25 Derating www.vishay.com 132 0 25 50 75 100 125 150 175 70 Ambient Temperature in C For technical questions, contact: ff2aresistors@vishay.com Document Number: 31010 Revision: 25-Jul-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1