RCWPM (Military M/D55342) www.vishay.com Vishay Dale Thick Film Chip Resistors, Military/Established Reliability MIL-PRF-55342 Qualified, Type RM FEATURES MECHANICAL SPECIFICATIONS Resistive element Encapsulation Substrate Termination Solder finish Ruthenium oxide Epoxy 96 % alumina Solder-coated nickel barrier Tin/lead solder alloy * Fully conforms to the requirements of MIL-PRF-55342 * Established reliability - verified failure rate; M, P, R, S and T levels * Construction is sulfur impervious against a high sulfur environment (ASTM B 809-95 test method) * 100 % group A screening per MIL-PRF-55342 * Termination style B - tin/lead wraparound over nickel barrier * Operating temperature range is - 55 C to + 150 C * For MIL-PRF-32159 zero ohm jumpers, see Vishay Dale's RCWPM Jumper (Military M32159) datasheet (www.vishay.com/doc?31028) * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS MIL VISHAY DALE MIL-PRF-55342 SPEC. TERM. MODEL STYLE SHEET CASE SIZE RCWPM-0502 RM0502 01 B 0502 RCWPM-550 RM0505 02 B 0505 RCWPM-5100 RM1005 03 B 1005 RCWPM-5150 RM1505 04 B 1505 RCWPM-7225 RM2208 05 B 2208 RCWPM-575 RM0705 06 B 0705 (3) RCWPM-1206 RM1206 07 B 1206 RCWPM-2010 RM2010 08 B 2010 RCWPM-2512 RM2512 09 B 2512 RCWPM-1100 RM1010 10 B 1010 RCWPM-0402 RM0402 11 B 0402 RCWPM-0603 RM0603 12 B 0603 RCWPM-0302 RM0302 13 B 0302 POWER MAX. RATING WORKING RESISTANCE TOLERANCE TEMPERATURE COEFFICIENT (2) RANGE P70 C VOLTAGE (1) % ppm/C V W 1 to 9.1 2, 5, 10 300 0.05 40 10 to 22M 1, 2, 5, 10 100, 300 1 to 9.1 2, 5, 10 300 0.125 40 10 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.20 75 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.15 125 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.225 175 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.15 50 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.25 100 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.80 150 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 1.0 200 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.50 75 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 9.1 2, 5, 10 300 0.05 30 10 to 22M 1, 2, 5, 10 100, 300 1 to 5.6 2, 5, 10 300 0.10 50 5.62 to 22M 1, 2, 5, 10 100, 300 1 to 9.1 2, 5, 10 300 0.04 15 10 to 22M 1, 2, 5, 10 100, 300 Notes * DSCC has created a series of drawings to support the need for 0201-sized product. Vishay Dale is listed as a resource on this drawing as follows: POWER RATING RES. RANGE RES. TOL. TEMP. COEF. MAX. WORKING DSCC DRAWING VISHAY DALE TERM. P70 C VOLTAGE (1) NUMBER MODEL % ppm/C W V 200 10 to 46.4 30 1, 5 07009 RCWP-0201 B 0.05 100 47 to 1M This drawing can be viewed at: www.landandmaritime.dla.mil/Programs/MilSpec/ListDwgs.aspx?DocTYPE=DSCCdwg. (1) Continuous working voltage shall be P x R or maximum working voltage, whichever is less. (2) Characteristics: K = 100 ppm/C; M = 300 ppm/C. (3) MIL case size 0705 and EIA case size 0805 are dimensionally the same. Revision: 23-Feb-11 Document Number: 31010 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCWPM (Military M/D55342) www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342M02B10E0RWB (preferred part number format) M 5 MIL STYLE 5 3 4 SPEC. SHEET CHARACTERISTICS D55342 applies to Style 07 (RM1206) only. 2 M 0 TERMINATION STYLE 2 B 1 VALUE AND TOLERANCE E 0 FAILURE RATE (see Standard B = Pre-tinned (see Tolerance Electrical nickel barrier, and Multipliers Specifications wraparound table) table) K = 100 ppm M = 300 ppm 0 W PACKAGING (1) C = Non-ER M = 1.0 %/1000 h P = 0.1 %/1000 h R = 0.01 %/1000 h S = 0.001 %/1000 h T = Space level M55342 applies to all other styles. R B SPECIAL TP = Tin/lead, Blank = T/R (full) Standard (Dash number) TN = Tin/lead, (Up to 1 digits) T/R (full), w/ESD S= UL = Tin/lead, T/R Space level single lot date code w/option 1 part S3 = Tin/lead, marking (-97) T/R (1000 pieces) T= SV = Tin/lead, T/R (1000 pieces), w/ESD Space level (-98) 2= WB = Tin/lead, Option 1 waffle tray part marking WA = Tin/lead, (-20) waffle tray, 3= w/ESD Options 2 and 3 WL = Tin/lead, part marking waffle tray, (-30) single lot date code S2 = Tin/lead, T/R (500 pieces) SU = Tin/lead, T/R (500 pieces), w/ESD S6 = Tin/lead, T/R (300 pieces) ST = Tin/lead, T/R (300 pieces), w/ESD Historical Part Numbering: M55342M02B10E0R (will continue to be accepted) M55342 MIL STYLE M CHARACTERISTICS 02 B 10E0 R WB SPEC. SHEET TERMINATION STYLE VALUE AND TOLERANCE FAILURE RATE PACKAGING CODE Notes * For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543). (1) Products with space level failure rates are only offered in packaging codes with ESD overpack and labeling. For all other failure rates, the ESD pack codes are an optional type of packaging. RESISTANCE TOLERANCE AND MULTIPLIERS TOLERANCE MULTIPLIER VALUE RANGE () M 1 1 to 9xx K N 1000 1K to 9xxK L P 1 000 000 1M to 22M 1% 2% 5% 10 % D G J E H F T Examples: Revision: 23-Feb-11 11D3 = 11.3 1 % 10E0 = 10 k 1 % 332D = 332 1 % 2F21 = 2.21 M 1 % 51G0 = 51 2 % 10H0 = 10 k 2 % 33H0 = 33 k 2 % 22T0 = 22 M 2 % 15J0 = 15 5 % 10K0 = 10 k 5 % 560K = 560 k 5 % 8L20 = 8.2 M 5 % 10M0 = 10 10 % 10N0 = 10 k 10 % 2P70 = 2.7 M 10 % 8P20 = 8.2 M 10 % Document Number: 31010 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RCWPM (Military M/D55342) www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) D C B A E VISHAY DALE MODEL MIL-PRF-55342 STYLE MIL SPEC. SHEET RCWPM-0502 RM0502 01 0.055 0.005 (1.40 0.13) 0.023 0.003 (0.58 0.08) 0.015 0.003 (0.38 0.08) 0.010 0.005 (0.25 0.13) 0.015 0.005 (0.38 0.13) RCWPM-550 RM0505 02 0.055 0.005 (1.40 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.010 0.005 (0.25 0.13) 0.015 0.005 (0.38 0.13) RCWPM-5100 RM1005 03 0.105 0.005 (2.67 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) RCWPM-5150 RM1505 04 0.155 0.005 (3.94 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) RCWPM-7225 RM2208 05 0.230 0.005 (5.84 0.13) 0.075 0.005 (1.91 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) RCWPM-575 RM0705 06 0.080 0.005 (2.03 0.13) 0.050 0.005 (1.27 0.13) 0.020 0.005 (0.51 0.13) 0.016 0.008 (0.41 0.20) 0.015 0.005 (0.38 0.13) RCWPM-1206 RM1206 07 0.125 0.005 (3.18 0.13) 0.063 0.005 (1.60 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) RCWPM-2010 RM2010 08 0.197 0.006 (5.00 0.15) 0.098 0.005 (2.49 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) RCWPM-2512 RM2512 09 0.250 0.005 (6.35 0.13) 0.124 0.005 (3.15 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) 0.020 0.005 (0.51 0.13) RCWPM-1100 RM1010 10 0.105 0.005 (2.67 0.13) 0.100 0.005 (2.54 0.13) 0.020 0.005 (0.51 0.13) 0.015 0.005 (0.38 0.13) 0.015 0.005 (0.38 0.13) RCWPM-0402 RM0402 11 0.039 0.003 (0.99 0.08) 0.020 0.003 (0.51 0.08) 0.013 0.003 (0.33 0.08) 0.010 0.005 (0.25 0.13) 0.010 0.005 (0.25 0.13) RCWPM-0603 RM0603 12 0.063 0.005 (1.60 0.13) 0.032 0.005 (0.81 0.13) 0.018 0.005 (0.46 0.13) 0.012 0.005 (0.30 0.13) 0.015 0.005 (0.38 0.13) RCWPM-0302 RM0302 13 0.034 0.004 (0.86 0.10) 0.021 0.003 (0.53 0.08) 0.013 0.003 (0.33 0.08) 0.007 0.005 (0.18 0.13) 0.008 0.005 (0.20 0.13) 0.024 0.002 (0.61 0.05) 0.012 0.002 (0.30 0.05) 0.009 0.002 (0.23 0.05) 0.006 0.003 (0.15 0.08) 0.006 + 0.002 - 0.004 (0.15 + 0.05 - 0.10) RCWP-0201 A (LENGTH) B (WIDTH) C (HEIGHT) D (TOP TERM) E (BOTTOM TERM) Rated Power in % DERATING CURVE 120 100 CAGE CODE: 91637 and SH903 80 60 40 20 0 - 55 - 25 0 25 50 75 100 125 150 175 70 Ambient Temperature in C Revision: 23-Feb-11 Document Number: 31010 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000