09/2008
165
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive ammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 310Vac / 800Vdc; (50/60Hz)
330Vac / 800Vdc; (50/60Hz)
Capacitance range: 0.01µF to 6.8µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M);
Tolerance ±5% (J) available upon request.
Dissipation factor (DF):
tgδx10-4 at +25°C ±5°C: 10 (6)* at 1kHz *
Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
1x105 M (5x105 M )* for C0.33µF
30000 s (150000 s )* for C>0.33µF
* Typical value
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
Ø d ±0.05 p 15 22.5 p 27.5 p = 37.5
0.6 or 0.8* 0.8 1.0
*See size table.
All dimensions are in mm.
R.49
X1 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: interference suppression and «across-
the-line» applications. Suitable for use in situations where
failure of the capacitor would not lead to danger of electric
shock.
Class X1 shall be applied for
PERMANENTLY
CONNECTED
APPARATUS
.
Note: PERMANENTLY CONNECTED APPARATUS:
apparatus which is intended for connection to the mains
by a connection which cannot be loosened BY HAND.
BY HAND:
operation that does not require the use of any object
such a tool, coin, etc.
PRODUCT CODE: R49
Note: R.49 series has replaced the 1.58 series (available
upon request). For new design we suggest the use of
the R.49 series.
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 5%
Insulation resistance: 50% of initial limit.
Endurance:
Test conditions
Temperature: +110°C±2°C
Test duration: 1000 h
Voltage applied: 1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 10%
Insulation resistance: 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |C/C|: 2%
Winding scheme
single sided metallized
polypropylene lm
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
Loose Taped
Fig.1 Fig.2
Insulated rigid leads Insulated exible leads 0.5mm2
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008 166
R.49
X1 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
PRODUCT CODE: R49
Rated
Cap. (*)
330 Vac / 800 Vdc
Std dimensions Ø d
Max
dv/dt at
440Vdc
(V/ µs)
Part Number
B H L p
0.047 µF 5.0 11.0 18.0 15.0 0.6 500 R49AI 2470 - - B1 -
0.068 µF 6.0 12.0 18.0 15.0 0.6 500 R49AI 2680 - - B1
0.068 µF 6.0 17.5 18.0 15.0 0.6 500 R49AI 2680 - - A2 -
0.10 µF 6.0 17.5 18.0 15.0 0.6 500 R49AI 3100 - - A2 -
0.15 µF 13.0 12.0 18.0 15.0 0.8 500 R49AI 3150 - - A3 -
0.15 µF 8.5 14.5 18.0 15.0 0.8 500 R49AI 3150 - - B1 M
0.22 µF 10.0 16.0 18.0 15.0 0.8 500 R49AI 3220 - - B2 M
0.22 µF 11.0 19.0 18.0 15.0 0.8 500 R49AI 3220 - - B1-
0.15 µF 6.0 15.0 26.5 22.5 0.8 400 R49AN 3150 - - B1 -
0.22 µF 7.0 16.0 26.5 22.5 0.8 400 R49AN 3220 - - B1 -
0.33 µF 8.5 17.0 26.5 22.5 0.8 400 R49AN 3330 - - B1 M
0.47 µF 10.0 18.5 26.5 22.5 0.8 400 R49AN 3470 - - B1 M
0.68 µF 13.0 22.0 26.5 22.5 0.8 400 R49AN 3680 - - B1 M
0.33 µF 9.0 17.0 32.0 27.5 0.8 200 R49AR 3330 - - A1 -
0.47 µF 11.0 20.0 32.0 27.5 0.8 200 R49AR 3470 - - A1 -
0.68 µF 11.0 20.0 32.0 27.5 0.8 200 R49AR 3680 - - B1 -
0.68 µF 13.0 22.0 32.0 27.5 0.8 200 R49AR 3680 - - A1 -
1.0 µF 13.0 25.0 32.0 27.5 0.8 200 R49AR 4100 - - B1 -
1.0 µF 14.0 28.0 32.0 27.5 0.8 200 R49AR 4100 - - A1 -
1.5 µF 14.0 28.0 32.0 27.5 0.8 200 R49AR 4150 - - B1 -
1.5 µF 18.0 33.0 32.0 27.5 0.8 200 R49AR 4150 - - A1 -
2.2 µF 18.0 33.0 32.0 27.5 0.8 200 R49AR 4220 - - B1 -
2.2 µF 22.0 37.0 32.0 27.5 0.8 200 R49AR 4220 - - A1 -
3.3 µF 22.0 37.0 32.0 27.5 0.8 200 R49AR 4330 - - B1 -
0.68 µF 11.0 22.0 41.5 37.5 1.0 100 R49AW 3680 - - B1 -
1.0 µF 11.0 22.0 41.5 37.5 1.0 100 R49AW 4100 - - B1 -
1.5 µF 13.0 24.0 41.5 37.5 1.0 100 R49AW 4150 - - B1 -
2.2 µF 16.0 28.5 41.5 37.5 1.0 100 R49AW 4220 - - B1 -
3.3 µF 19.0 32.0 41.5 37.5 1.0 100 R49AW 4330 - - B1 -
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R49AW 4470 - - B1 -
6.8 µF 30.0 45.0 41.5 37.5 1.0 100 R49AW 4680 - - B1 -
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04+2
25-1/+2
30 +5
00
50
40
Loose, insulated
rigid leads
Loose, insulated
exible leads
30+5
150±5
51
52
Note: Ammo-pack is the preferred packaging for taped version.
Mechanical version and packaging (Table1)
Tolerance: K (±10%); M (±20%)
For “capacitor connected in serial with main line” (two - phase and
three - phase net) application, please read the “SHORT GUIDE TO
CHOOSE THE RIGHT FILM CAPACITORS” at pag. 152 and contact
our Technical Service for choosing the safest solution.
All dimensions are in mm
E12 Series available upon request
Rated
Cap. (*)
310 Vac / 800 Vdc
Std dimensions Ø d
Max
dv/dt at
440Vdc
(V/ µs)
Part Number
B H L p
0.010 µF 5.0 11.0 13.0 10.0 0.6 600 R49AF 2100 - - 01 -
0.015 µF 5.0 11.0 13.0 10.0 0.6 600 R49AF 2150 - - 01 -
0.022 µF 6.0 12.0 13.0 10.0 0.6 600 R49AF 2120 - - 01 -
0.033 µF 6.0 12.0 13.0 10.0 0.6 600 R49AF 2330 - - 01 -
0.010 µF 5.0 11.0 18.0 15.0 0.6 500 R49AI 2100 - - 01 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 500 R49AI 2150 - - 01 -
0.022 µF 5.0 11.0 18.0 15.0 0.6 500 R49AI 2220 - - 01 -
0.033 µF 5.0 11.0 18.0 15.0 0.6 500 R49AI 2330 - - 01 -
0.047 µF 6.0 12.5 18.0 15.0 0.6 500 R49AI 2470 - - 01 -
0.068 µF 6.0 12.0 18.0 15.0 0.6 500 R49AI 2680 - - M1 -M
0.068 µF 7.5 13.5 18.0 15.0 0.6 500 R49AI 2680 - - 01 -
0.10 µF 7.5 13.5 18.0 15.0 0.6 500 R49AI 3100 - -M1 -M
0.10 µF 8.5 14.5 18.0 15.0 0.6 500 R49AI 3100 - - 01 -
0.15 µF 10.0 16.0 18.0 15.0 0.8 500 R49AI 3150 - - 01 -
0.10 µF 6.0 15.0 26.5 22.5 0.8 400 R49AN 3100 - - 01
0.15 µF 7.0 16.0 26.5 22.5 0.8 400 R49AN 3150 - - 01
0.22 µF 8.5 17.0 26.5 22.5 0.8 400 R49AN 3220 - - 01
0.33 µF 10.0 18.5 26.5 22.5 0.8 400 R49AN 3330 - - 01
0.47 µF 11.0 20.0 26.5 22.5 0.8 400 R49AN 3470 - - 01
0.33 µF 9.0 17.0 32.0 27.5 0.8 200 R49AR 3330 - - 01
0.47 µF 11.0 20.0 32.0 27.5 0.8 200 R49AR 3470 - - 01
0.68 µF 13.0 22.0 32.0 27.5 0.8 200 R49AR 3680 - - 01
1.0 µF 14.0 28.0 32.0 27.5 0.8 200 R49AR 4100 - - 01
1.5 µF 18.0 33.0 32.0 27.5 0.8 200 R49AR 4150 - - 01
2.2 µF 22.0 37.0 32.0 27.5 0.8 200 R49AR 4220 - - 01
Mechanical version and packaging (Table1)
Tolerance: K (±10%); M (±20%)
APPROVALS
ENEC
IEC 60384-14 Class X1 File No.CA08.00030
UL 1414
(up to 1µF, 85°C;
250Vac)
Across-the-line File No.E97797
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
Across-the-line
certied for
Canad
File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
CSA - C22.2 No.8
(310 Vac)
Electromagnetic
Interference
Filters certied
for Canada
File No.E85238
Approved according to IEC 60384-14
According to IEC 60065.
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008
167
Loose Taped
Fig.1 Fig.2
Insulated rigid leads Insulated exible leads 0.5mm2
Ø d ±0.05 p= 27.5 p = 37.5
0.8 1
All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive ammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents: IEC 60384-14, EN 132400.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 330Vac; 800Vdc(50/60Hz)*
Capacitance range: 0.33µF to 6.8µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
Dissipation factor (DF):
tgδx10-4 at +25°C ±5°C: 10 (6)* at 1kHz *
Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
1x105 M (5x105 M)* for C0.33µF
30000 s (150000 s)* for C>0.33µF
* Typical value
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 5%
Insulation resistance: 50% of initial limit.
Endurance:
Test conditions
Temperature: +110°C±2°C
Test duration: 1000 h
Voltage applied: 1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 10%
Insulation resistance: 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |C/C|: 2%
Pitch Box thickness Maximum dimensions (mm)
(mm) (mm) B max H max L max
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
R.49+R
Capacitors with discharge resistor
X1 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: interference suppression and «across-
the-line» applications. Suitable for use in situations where
failure of the capacitor would not lead to danger of electric
shock.
Class X1 shall be applied for
PERMANENTLY
CONNECTED
APPARATUS
.
Note: PERMANENTLY CONNECTED APPARATUS:
apparatus which is intended for connection to the mains
by a connection which cannot be loosened BY HAND.
BY HAND:
operation that does not require the use of any object
such a tool, coin, etc.
PRODUCT CODE: R49
Not for use in series with the mains.
See www.kemet.com for more information.
09/2008 168
R.49+R
Capacitor with discharge resistor
X1 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
PRODUCT CODE: R49
Rated
Cap. (*)
330 Vac / 800 Vdc
Std dimensions Ø d
Max
dv/dt at
440Vdc
(V/ µs)
Part Number
B H L p
0.33 µF 9.0 17.0 32.0 27.5 0.8 200 R49AR 3330 - - B1 - -
0.47 µF 11.0 20.0 32.0 27.5 0.8 200 R49AR 3470 - - B1 - -
0.68 µF 13.0 22.0 32.0 27.5 0.8 200 R49AR 3680 - - B1 - -
1.0 µF 13.0 22.0 32.0 27.5 0.8 200 R49AR 4100 - - B1 M -
1.0 µF 14.0 28.0 32.0 27.5 0.8 200 R49AR 4100 - - B2 - -
1.5 µF 18.0 33.0 32.0 27.5 0.8 200 R49AR 4150 - - B1 M -
1.5 µF 14.0 28.0 32.0 27.5 0.8 200 R49AR 4150 - - B2 - -
2.2 µF 22.0 37.0 32.0 27.5 0.8 200 R49AR 4220 - - B1 - -
0.68 µF 11.0 22.0 41.5 37.5 1.0 100 R49AW 3680 - - A1 - -
1.0 µF 11.0 22.0 41.5 37.5 1.0 100 R49AW 4100 - - B1 - -
1.5 µF 13.0 24.0 41.5 37.5 1.0 100 R49AW 4150 - - B1 - -
2.2 µF 16.0 28.5 41.5 37.5 1.0 100 R49AW 4220 - - B1 - -
3.3 µF 19.0 32.0 41.5 37.5 1.0 100 R49AW 4330 - - B1 - -
4.7 µF 20.0 40.0 41.5 37.5 1.0 100 R49AW 4470 - - B1 - -
6.8 µF 30.0 45.0 41.5 37.5 1.0 100 R49AW 4680 - - B1 - -
Rated voltage (A=330Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
Value of discharge resistor (Table 2)
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
REEL Ø500mm 19.05 2 27.5 CK
Loose, short leads
Loose, long leads
Loose, long leads
04 +2
25 -1/+2
30 +5
00
50
40
Loose, insulated
rigid leads
Loose, insulated
exible leads
30 +5
150 ±5
51
52
PRODUCT CODE SYSTEM
The part number, comprising 15 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
R 4 9 - -
Digit 1 to 3 Series code.
Digit 4 a.c. rated voltage:
A = 330Vac;
Digit 5 Pitch:
R = 27.5; W = 37.5 mm
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table 1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use
Digit 14 Capacitance tolerance:
K=±10%; M=±20%
Digit 15 Value of the discharge resistor (tolerance±10%)
according to the following table*:
*Other resistors are avaible upon
request.
Table 2
R code (-)
470 kE
680 kF
1 MG
1.2 M L
1.5 M N
2.2 M P
3.3 M Q
4.7 M S
6.8 M T
10 M V
All dimensions are in mm
APPROVALS
ENEC
IEC 60384-14 Class X1 File No.CA08.00030
UL 1283
(310 Vac-105°C)
Electromagnetic
Interference
Filters
File No.E85238
CSA - C22.2 No.8
(310 Vac-105°C)
Electromagnetic
Interference
Filters certied
for Canada
File No.E85238
Approved according to IEC 60384-14
According to IEC 60065.
Not for use in series with the mains.
See www.kemet.com for more information.