P6KE SERIES
FEATURES
Glass passivated chip
Low leakage
Uni and Bidirectional unit
Excellent clamping capability
The plastic material has U/L recognition 94V-O
Fast response time
MECHANICAL DATA
Case : Molded Plastic
Marking : Unidirectional - type number and cathode
band Bidirectional - type number only
Weight : 0.4 grams
T
J
Operating Temperature Range
-55 to +175
T
STG
Storage Temperature Range
-55 to +175
C
I
FSM
Peak Forward Surge Current 8.3ms single half
sine-wave @ T
A
= 25 (Note 2)
100
AMPS.
UNIT
P
M(AV)
5.0
WATTS
Steady State Power Dissipation at TL =100
on infinite heatsink
P
PK
WATTS
PEAK POWER DISSIPATION AT T
A
= 25 ,
TP = 1ms (Note 1)
SYMBOLS VALUE
600
C
CHARACTERISTICS
DO-15
A
C
D
A
B
Max.
All Dimensions in millimeter
Min.
DO-15
Dim.
A
D
C
B
25.4
7.60
-
5.80
0.71
2.60 3.60
0.86
GLASS PASSIVATED
UNIDIRECTIONAL AND BIDIRECTIONAL
TRANSIENT VOLTAGE SUPPRESSORS
REVERSE VOLTAGE -
6.8
to
550
Volts
POWER DISSIPATION -
600
WATTS
V
F
SEE NOTE 3 Volts
Maximum Instantaneous forward voltage at 50A
for unidirectional devices only
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
NOTES : 1. Non-repetitive current pulse, per fig. 5 and derated above T
J
= 25
per fig. 1
2. 8.3ms single half sine-wave duty cycle= 4 pulses per minutes maximum (uni-directional units only).
3. VF= 3.5V on P6KE6.8A thru P6KE200A devices and VF= 5.0V on P6KE220A thru P6KE550A devices.
4. Thermal Resistance Junction to Case, Lead and Ambient.
SEMICONDUCTOR
LITE-ON
REV. 11, Oct-2010, KDID02
Typical Thermal Resistance (Note 4)
20
15
50
C/W
R
0JC
R
0JL
R
0JA
RATING AND CHARACTERISTIC CURVES
P6KE SERIES
FIG.1 - PULSE DERATING CURVE
PEAK PULSE DERATING IN % OF PEAK
POWER OR CURRENT
JUNCTION TEMPERATURE,
25 75 100 125 150
0
50
50
100
0175
75
25
200
10 X 1000 WAVEFORM
AS DEFINED BY R.E.A.
FIG.2 - TYPICAL JUNCTION CAPACITANCE
CAPACITANCE , (pF)
REVERSE VOLTAGE , VOLTS
101 100
10000
1000
100
10
1000
FIG.3 - PULSE RATING CURVE
P
P
, PEAK PULSE POWER ( K
W
)
T
P
, PULSE WIDTH
0.1
1.0
10
0.1us 1.0us 10us 100us 1.0ms 10ms
100
4
MEASURED AT
STAND-OFF VOLTAGE
TJ =25 C
Non-repetive Pulse Waveform
Shown in Figure 5
T
A
=25 C
FIG.5 - PULSE WAVEFORM
0
0
I
P,
PEAK PULSE CURRENT , (% )
T , TIME ( ms )
50
100
1.0 2.0 3.0 4.0
T
R
=10us
Peak value (I
RSM)
TP
10 x 1000 waveform as
defined by R.E.A.
Pulse width (T
P
) is defined
as that point where the peak
current decays to 50% of
I
RSM
T
J
=25 C
I
RSM
2
Half value=
PM
(AV)
, STEADY STATE POWER DISSIPATION (W)
FIG.4 - STEADY STATE POWER DERATING CURVE
TL, LEAD TEMPERATURE,
25 75 100 125 150
0.0
50
0175 200
1.0
2.0
3.0
4.0
5.0
60Hz RESISTIVE OR
INDUCTIVE LOAD
FIG.4 - STEADY STATE POWER DERATING CURVE
TL, LEAD TEMPERATURE,
25 75 100 125 15050
0175 200
60Hz RESISTIVE OR
INDUCTIVE LOAD
Type
Number
Type
Number
Reverse
Standoff
Voltage
Max.
Reverse
Leakage
@VR
Max.
Peak
Pulse
Current
Max.
Clamping
Voltage
@Ipp
Max. Voltage
Temp.
Variation
of Bv
(UNI) (BI) VR (V) Min (V) Max (V) It (mA) IR (uA) Ipp (A) Vc (V) %/
P6KE6.8A P6KE6.8CA 5.8 6.45 7.13 10 1000 57.1 10.5 0.057
P6KE7.5A P6KE7.5CA 6.4 7.13 7.88 10 500 53.1 11.3 0.061
P6KE8.2A P6KE8.2CA 7.0 7.79 8.61 10 200 49.6 12.1 0.065
P6KE9.1A P6KE9.1CA 7.8 8.65 9.56 1 50 44.8 13.4 0.068
P6KE10A P6KE10CA 8.6 9.50 10.50 1 10 41.4 14.5 0.073
P6KE11A P6KE11CA 9.4 10.5 11.6 1 5 38.5 15.6 0.075
P6KE12A P6KE12CA 10.2 11.4 12.6 1 5 35.9 16.7 0.078
P6KE13A P6KE13CA 11.1 12.4 13.7 1 5 33.0 18.2 0.081
P6KE15A P6KE15CA 12.8 14.3 15.8 1 5 28.3 21.2 0.084
P6KE16A P6KE16CA 13.6 15.2 16.8 1 5 26.7 22.5 0.086
P6KE18A P6KE18CA 15.3 17.1 18.9 1 5 23.8 25.2 0.088
P6KE20A P6KE20CA 17.1 19.0 21.0 1 5 21.7 27.7 0.090
P6KE22A P6KE22CA 18.8 20.9 23.1 1 5 19.6 30.6 0.092
P6KE24A P6KE24CA 20.5 22.8 25.2 1 5 18.1 33.2 0.094
P6KE27A P6KE27CA 23.1 25.7 28.4 1 5 16.0 37.5 0.096
P6KE30A P6KE30CA 25.6 28.5 31.5 1 5 14.5 41.4 0.097
P6KE33A P6KE33CA 28.2 31.4 34.7 1 5 13.1 45.7 0.098
P6KE36A P6KE36CA 30.8 34.2 37.8 1 5 12.0 49.9 0.099
P6KE39A P6KE39CA 33.3 37.1 41.0 1 5 11.1 53.9 0.100
P6KE43A P6KE43CA 36.8 40.9 45.2 1 5 10.1 59.3 0.101
P6KE47A P6KE47CA 40.2 44.7 49.4 1 5 9.3 64.8 0.101
P6KE51A P6KE51CA 43.6 48.5 53.6 1 5 8.6 70.1 0.102
P6KE56A P6KE56CA 47.8 53.2 58.8 1 5 7.8 77.0 0.103
P6KE62A P6KE62CA 53.0 58.9 65.1 1 5 7.1 85.0 0.104
P6KE68A P6KE68CA 58.1 64.6 71.4 1 5 6.5 92.0 0.104
P6KE75A P6KE75CA 64.7 71.3 78.8 1 5 5.8 103.0 0.105
P6KE82A P6KE82CA 70.1 77.9 86.1 1 5 5.3 113.0 0.105
P6KE91A P6KE91CA 77.8 86.5 95.6 1 5 4.8 125.0 0.106
P6KE100A P6KE100CA 85.5 95.0 105.0 1 5 4.4 137.0 0.106
P6KE110A P6KE110CA 94.0 105.0 116.1 1 5 3.9 152.0 0.107
P6KE120A P6KE120CA 102.0 114.0 126.0 1 5 3.6 165.0 0.107
P6KE130A P6KE130CA 111.0 124.0 137.1 1 5 3.4 179.0 0.107
P6KE150A P6KE150CA 128.0 143.0 158.1 1 5 2.9 207.0 0.108
P6KE160A P6KE160CA 136.0 152.0 168.0 1 5 2.7 219.0 0.108
P6KE170A P6KE170CA 145.0 162.0 179.1 1 5 2.6 234.0 0.108
P6KE180A P6KE180CA 154.0 171.0 189.0 1 5 2.4 246.0 0.108
P6KE200A P6KE200CA 171.0 190.0 210.0 1 5 2.2 274.0 0.108
P6KE220A P6KE220CA 185.0 209.0 231.0 1 5 1.8 328.0 0.108
P6KE250A P6KE250CA 214.0 237.0 262.0 1 5 1.7 344.0 0.110
P6KE300A P6KE300CA 256.0 285.0 315.0 1 5 1.4 414.0 0.110
P6KE350A P6KE350CA 300.0 332.0 367.0 1 5 1.2 482.0 0.110
P6KE400A P6KE400CA 342.0 380.0 420.0 1 5 1.1 548.0 0.110
P6KE440A P6KE440CA 376.0 418.0 462.0 1 5 1.0 600.0 0.110
P6KE550A P6KE550CA 467.5 522.5 577.5 1 4 0.80 753.5 0.113
NOTE :
Suffix 'C' denotes bidirectional device. Suffix 'A' denotes 5% tolerance device.
1. For bidirectional devices having VR of 10 volts and under, the IR limit is doubled .
2. For unidirectional devices P6KE6.8A to P6KE200A, VFmax = 3.5V at IF=50A 300us square wave pulse.
For unidirectional devices P6KE220A to P6KE550A, VFmax = 5.0V at IF=50A 300us square wave pulse.
Breakdown Voltage
BV Volts @It
SEMICONDUCTOR
LITE-ON
Legal Disclaimer Notice
P6KE SERIES
LSC reserves the right to make changes to this document and its products and
specifications at any time without notice. Customers should obtain and confirm
the latest product information and specifications before final design, purchase or
use.
LSC makes no warranty, representation or guarantee regarding the suitability of
its products for any particular purpose, nor does LSC assume any liability for
application assistance or customer product design. LSC does not warrant or
accept any liability with products which are purchased or used for any
unintended or unauthorized application.
No license is granted by implication or otherwise under any intellectual property
rights of LSC.
LSC products are not authorized for use as critical components in life support
devices or systems without express written approval of LSC.
Important Notice and Disclaimer