High capacity up to 6A in a slim SIL package Power 1 Form A High Capacity (AQZ20G) FEATURES New 3.5 .138 21 .827 12.5 .492 Height includes standoff mm inch 1 2 3 4 RoHS compliant Please check our website for the latest information regarding compliance to safety standards. 1. High capacity type power PhotoMOS. Can switch a wide range of currents and voltages. Can control various types of loads, from very small loads to a max. 6A AC/DC current for sequencers, motors, and lamps. 2. Low on-resistance and high sensitivity. Low on-resistance of less than Typ. 0.015 (AQZ202G). High sensitivity LED operate current of Typ. 1 mA. 3. AC/DC dual use Bi-directional control is possible. There is no need to differentiate depending on the load as was necessary with the conventional SSR. 4. Slim SIL 4-pin package (L) 21.0 mm x (W) 3.5 mm x (H) 12.5 mm (L) .827 inch x (W) .138 inch x (H) .492 inch The compact size of the 4-pin SIL package allows high density mounting 5. Low-level off state leakage current of max. 10 A 6. Controls low-level analog signals The triac, photocoupler, or SSR cannot be used to control signals of less than several hundred mV. The high capacity type power PhotoMOS feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. TYPICAL APPLICATIONS * Traffic signals * Measuring instruments * Industrial machines * Mercury relay replacement TYPES AC/DC dual use Output rating* Load voltage Load current 60 V 6.0 A 4.0 A New 100 V 200 V 2.0 A 1.0 A New 600 V Package Part No. SIL4-pin AQZ202G AQZ205G AQZ207G AQZ206G2 Packing quantity Inner carton Outer carton 25 pcs. 500 pcs. Note: Please refer to the "Cautions for use" regarding the recommended operation load voltage. * Load voltage and current: Indicate the peak AC and DC values. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Input Output Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage Continuous load current Peak load current Power dissipation Total power dissipation I/O isolation voltage Ambient temperature Operating Storage Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQZ202G 60 V 6.0 A 12.0 A -1- AQZ205G AQZ207G 50 mA 5V 1A 75 mW 100 V 200 V 4.0 A 2.0 A 8.0 A 6.0 A 1.6 W 1.6 W 2,500 Vrms -40 to +85C -40 to 185F -40 to +100C -40 to 212F AQZ206G2 Remarks f = 100Hz, Duty factor = 0.1% 600 V 1.0 A 3.0 A Peak AC, DC 100 ms (1shot), VL = DC (Non-icing at low temperatures) ASCTB382E 201805-T Power 1 Form A (AQZ20G) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol LED operate current Input LED turn off current LED dropout voltage Typical Maximum Minimum Typical Typical Maximum AQZ202G IFon IFoff VF Typical Ron On resistance Maximum Output Off state leakage current AQZ205G AQZ207G 1.0 mA 3.0 mA 0.2 mA 0.9 mA 1.25 V (1.16 V at IF = 10 mA) 1.5 V Maximum Condition IL = 100 mA VL = 10 V IL = 100 mA VL = 10 V IF = 50 mA 0.015 0.035 0.18 0.52 0.03 0.06 0.35 0.8 2.5 ms 3.0 ms IF = 10 mA IL = Max. Within 1 s IF = 0 mA VL = Max. IF = 10 mA IL = 100 mA VL = 10 V IF = 10 mA IL = 100 mA VL = 10 V 10 A ILeak Typical 3.8 ms 5.0 ms Ton Turn on time* Maximum 10 ms Typical 0.2 ms 0.3 ms 0.2 ms Toff Turn off time* Transfer characteristics AQZ206G2 Maximum Initial I/O isolation resistance Typical Maximum Minimum Max. operating frequency Maximum I/O capacitance 3.0 ms Riso 0.8 pF 1.5 pF 1,000 M -- 0.5 cps Ciso f = 1 MHz VB = 0 V 500 V DC IF = 10 mA Duty factor = 50% IL = Max., VL = Max. *Turn on/Turn off time Input 3. Recommended operating conditions (Ambient temperature: 25C 77F) Please use under recommended operating conditions to obtain expected characteristics. Item Input LED current Load voltage (Peak AC) AQZ202G Continuous load current Load voltage (Peak AC) AQZ205G Continuous load current Load voltage (Peak AC) AQZ207G Continuous load current Load voltage (Peak AC) AQZ206G2 Continuous load current Symbol IF VL IL VL IL VL IL VL IL Min. 10 -- -- -- -- -- -- -- -- Max. 30 48 6.0 80 4.0 160 2.0 480 1.0 Unit mA V A V A V A V A 90% 10% Output Ton Toff These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. Load current vs. ambient temperature characteristics in adjacent mounting 3. On resistance vs. ambient temperature characteristics Allowable ambient temperature: -40 to +85C -40 to +185F IL: Load current; IL (max.): Maximum continuous load current LED current: 10 mA; Continuous load current: 6 A (DC) (AQZ202G), 4 A (DC) (AQZ205G), 2 A (DC) (AQZ207G), 1 A (DC) (AQZ206G2) 10 IL/IL (max.)x100,% Load current, A 4 AQZ202G AQZ205G =20 mm =10 mm 80 =5 mm 60 On resistance, 100 8 6 1 120 AQZ206G2 0.8 0.6 0.4 40 2 AQZ207G AQZ207G 0 -40 -20 0 20 0.2 20 AQZ206G2 =Adjacent mounting pitch 40 60 8085 100 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85 100 Ambient temperature, C -2- AQZ202G AQZ205G 0 -40 -20 0 20 40 60 8085 Ambient temperature, C ASCTB382E 201805-T Power 1 Form A (AQZ20G) 4. Turn on time vs. ambient temperature characteristics 5. Turn off time vs. ambient temperature characteristics 6. LED operate current vs. ambient temperature characteristics LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) LED current: 10 mA; Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Turn on time, ms 8 AQZ205G 6 AQZ202G 4 5 LED operate current, mA 1 Turn off time, ms 10 0.8 0.6 0.4 AQZ206G2 AQZ207G AQZ202G AQZ207G 2 4 3 2 AQZ202G AQZ205G AQZ205G AQZ206G2 0.2 1 AQZ207G AQZ206G2 0 -40 -20 0 20 40 60 0 8085 -40 -20 Ambient temperature, C 0 20 40 60 0 8085 -40 -20 Ambient temperature, C 0 20 40 60 8085 Ambient temperature, C 7. LED turn off current vs. ambient temperature characteristics 8. LED dropout voltage vs. ambient temperature characteristics 9. Current vs. voltage characteristics of output at MOS portion Load voltage: 10 V (DC); Continuous load current: 100 mA (DC) Sample: all types; LED current: 5 to 50 mA Ambient temperature: 25C 77F 6 4 3 2 Current, A 1.5 LED dropout voltage, V LED turn off current, mA 5 1.4 4 AQZ207G 2 1.3 AQZ206G2 -0.6 1.2 -0.4 -0.2 0.2 50mA 30mA 20mA 10mA 5mA 1.1 AQZ202G, AQZ205G, AQZ206G2 1 AQZ202G AQZ205G 1.0 0.4 0.6 Voltage, V -2 -4 AQZ207G 0 -40 -20 0 20 40 60 0 -40 8085 -20 Ambient temperature, C 0 20 40 60 -6 8085 Ambient temperature, C 11. Turn on time vs. LED forward current characteristics 12. Turn off time vs. LED forward current characteristics Ambient temperature: 25C 77F Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F Load voltage: 10 V (DC); Continuous load current: 100 mA (DC); Ambient temperature: 25C 77F 50 0.5 40 0.4 -3 10-6 AQZ202G AQZ205G 10-9 30 20 AQZ207G 10 AQZ206G2 10 -12 0 20 40 60 80 0 0 100 Turn off time, ms 10 Turn on time, ms Off state leakage current, A 10. Off state leakage current vs. load voltage characteristics AQZ205G AQZ202G AQZ206G2 AQZ207G 10 Load voltage, V 20 0.3 AQZ205G 0.2 AQZ202G AQZ207G 0.1 30 40 50 0 0 60 AQZ206G2 10 LED forward current, mA 20 30 40 50 60 LED forward current, mA 14. Turn on time vs. load current characteristics 15. Turn off time vs. load voltage characteristics LED current: 10 mA; Continuous load current: 100 mA; Ambient temperature: 25C 77F LED current: 10 mA; Load voltage: 10 V (DC); Ambient temperature: 25C 77F LED current: 10 mA; Continuous load current: 100 mA; Ambient temperature: 25C 77F 10 0.5 8 8 0.4 6 4 AQZ205G AQZ202G AQZ202G 4 AQZ206G2 0 0 100 200 300 400 Load voltage, V 500 600 0.3 0.2 AQZ206G2 AQZ207G AQZ207G 2 AQZ205G 6 Turn off time, ms 10 Turn on time, ms Turn on time, ms 13. Turn on time vs. load voltage characteristics 2 0 0 AQZ205G AQZ202G AQZ207G AQZ206G2 0.1 1 2 3 4 Load current, A -3- 5 6 0 0 100 200 300 400 500 600 Load voltage, V ASCTB382E 201805-T Power 1 Form A (AQZ20G) 16. Turn off time vs. load current characteristics LED current: 10 mA; Load voltage: 10 V (DC); Ambient temperature: 25C 77F 17. Max. operating frequency vs. load voltage/ current characteristics 18. Output capacitance vs. applied voltage characteristics Sample: All types; LED current: 10 mA; Ambient temperature: 25C 77F VL: Load voltage, VL (Max.): Max. rated load voltage IL: Load current, IL (Max.): Max. rated continuous load current Frequency: 1 MHz; Ambient temperature: 25C 77F 10 0.4 0.3 AQZ205G 0.2 AQZ202G 0.1 AQZ206G2 AQZ207G 5000 duty = 50% 9 Output capacitance, pF Max. operating frequency, cps Turn off time, ms 0.5 8 7 6 5 4 3 4000 3000 AQZ206G2 2000 1000 2 AQZ207G AQZ202G 1 0 0 1 2 3 4 5 Load current, A 6 0 0 10 20 30 40 50 60 70 80 90 100 VL x IL x 100 (%) VL (max.) x IL (max.) 0 0 20 40 60 AQZ205G 80 100 Applied voltage, V CAUTIONS FOR USE For cautions for general use, please read "PhotoMOS(R) Cautions for Use" at Automation Control WEB site (as described in footer of catalog). -4- ASCTB382E 201805-T -5-