RF-16 SMA-J-P-H-RA-TH1 SMA-J-P-H-ST-TH1 SMA-J-P-H-ST-EM1 50 SMA JACKS SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?SMA-TH, www.samtec.com?SMA-SM, www.samtec.com?SMA-EM, www.samtec.com?SMA-MT or www.samtec.com?SMA-PN Contact Material: BeCu Shell Material: Brass Insulator Material: PTFE (-PN) Operating Temp Range: -65C to +125C Contact Resistance: Center Contact: 6m max Outer Contact: 2m max Insulator Resistance: 5,000 M Impedance: 50 Dielectric Withstanding Voltage: 1,000 Vrms Frequency Range: 0~20 GHz (Cable dependent) Working Voltage: 335V RoHS Compliant: Yes Mates with: RF174, RF316, RF058, RF405, RF402, RS316, GRF1H-C, IJ5H, RF23S, BE25S Mates with a wide variety of cable assemblies Panel Mount, Edge Mount, Mixed Technology, Through-Hole or Surface Mount termination SMA TYPE GENDER Processing: Lead-Free Solderable: Yes -J = Jack PLATING -P -H = PCB Mount = 30" (0.76 m) Gold center contact, 3" (0.08 m) Gold outer contact -GF (15.10) .594 (7.00) .276 (6.33) .249 DIA (9.86) .388 (6.36) .250 (7.00) .276 -RA-SM1 (6.33) .249 DIA (15.10) .594 (6.35) .250 (9.55) .376 Note: While optimized for 50 applications, this connector can also perform well in certain 75 applications. Contact RFGroup@samtec.com for further information. = 10" (0.25 m) Gold center contact, 3" (0.08 m) Gold outer contact (-SM1 only) (11.60) .457 (13.50) .531 (7.95) .313 (10.55) .415 (11.60) .457 (13.80) .543 (10.30) .405 (3.94) .155 (1.27) .050 DIA -ST-TH1 (1.02) .040 (1.27) .050 DIA -ST-MT1 WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. (1.02) .040 -RA-TH1 SMA-J-P-H-ST-PN2 SMA-J-P-H-ST-PN4 SMA-J-P-H-ST-EM3 SMA SERIES Standard or Drop-in Edge Mount Performance up to 6 GHz 50 impedance 2-hole or 4-hole Panel Mount jacks TERMINATION ORIENTATION -ST -TH1 = Straight = Through-hole -RA -MT1 = Mixed Technology (-ST only) -SM1 -PN2 = Surface Mount (-GF-RA only) = Right Angle = 2-Hole Panel Mount (-ST only) -EM1 -PN4 = Edge Mount (-ST only) -EM3 (12.22) .481 (12.70) .500 (8.64) .340 = 4-Hole Panel Mount (-ST only) (2.59) .102 DIA = Drop-in Edge Mount (-ST only) (5.66) .223 (6.35) .250 (15.88) .625 (9.52) .375 -ST-EM1 (6.33) .249 DIA (9.52) .375 (3.81) .150 (1.27) .050 DIA (1.65) (9.52) .065 .375 (7.00) .276 (1.30) .051 DIA (2.86) .113 (3.02) .119 -ST-PN2 (7.00) .276 -ST-PN4 (13.00) .512 -ST-EM3 WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. (2.00) .079