Series 24 Lok Tainer SERIES 24 LOK TAINER WEIGHT .97g/cm (.087 oz/in) MATERIALS AND FINISH HOUSING Material: .025-in. (.64-mm) thick Beryllium Copper per QQ-C- 533 or .024-in. (.61-mm) thick Cold Rolled Steel per ASTM A-366 Finish: See finish table on opposite page CAM Material: Beryllium Copper per QQ-C-533 LEVER Material: Cold Rolled Steel per ASTM A-366 Note: Beryllium Copper lever furnished when housing is unplated Finish: See finish table on opposite page nVent.com/SCHROFF 1-800-854-7086 SERIES 24 LOK TAINER MOUNTING HOLE DIMENSIONS Part Number Code Series 24 LOK-TAINER Lever Actuated 24 Finger Tab Finger tab _________________________ T None ________________________[Blank] Housing Material S BOARD THICKNESS TABLE __________________ Extractor Flange (Standard) __________________________________ X None _________________________________ [Blank] Board Thickness 1.60 -1 -2 _________ 2 A C FINISH TABLE Length Length in 12.7 ( ) increments ____________ 6 [76.2 (3.00)] ___________________________________ to 24 [304.8 (12.00)] Finish ____________________________________________ 5 Lever Action -1 -2 -4 CADMIUM PER QQ-P-416, TYPE 2, CLASS 2 -6 Left hand ________________________________________________ L Right hand _______________________________________________ R nVent may modify standard parts without prior notice to or approval from customers. These modifications may change product appearance, but will not have a detrimental effect on form, fit or function. (c)2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.