Cable Gland and Locknut
Page <1> 07/06/10 V1.0
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Application range
In areas with high demands on special mechanical and chemical stability.
Chemical industry.
Measurement and control technology.
Machine and apparatus construction.
Plant engineering and construction.
Needed wherever a gland has to be countered or thin walled housings only allow through holes.
Benefits
Maximum reliability.
Optimal strain relief.
Large, variable clamping ranges.
For cable diameters up to 68mm.
Design
Metric connection thread acc. to EN 50262.
PG connection thread.
Note
Counter nut to be used SKINDICHTSM.
For suitable accessories see SKINTOP accessories PG.
Counter nut to be used SKINDICHTSM-M.
For suitable accessories see SKINTOP accessories.
Cable Gland and Locknut
Page <2> 07/06/10 V1.0
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Cross-References
SKINTOPMSR-M.
Accessories
SKINDICHTSM-M, SKINTOPDIX-M, SKINTOPDIX-M Automation, SKINTOPSDV-M ATEX, SKINTOPSD-M,
SKINTOPDV-M.
Technical date
Caution
Installation dimensions and tightening torques see appendix T21.
Approvals
UL, CSA, DNV approval for size M75 x 1,5 pending.
Material
Body : Nickel plated brass Insert : Polyamide seal:
CR O-ring: NBR.
Nickel-plated brass.
Degree of protection
IP 68-10 bar.
IP 69 K pending.
IP 68-5 bar.
Rage of temperature
-30°C up to +100°C.
Article List
Part Number Part
Designation/
Size
Height
(mm) SW
(mm)
Thread
Length D
(mm) Pieces /PU Thickness
in
(mm)
Outer
Ø (mm)
Clamping
Range Ø
F (mm)
Overall
Length C
(mm)
52015700
+
52003490
MS 7 - 14 5
100
- - 2 - 6.5 25
SM 7 2.8 15 - - - - -
52015710
+
52003500
MS 9 - 17 6 - - 4 - 8 29
SM 9 2.8 18 - - - - -
52015720
+
52003510
MS 11 - 20 6 50 - - 4 - 10 32
SM 11 3 23 - 100 - - - -
52015730
+
52003520
MS 13.5 - 55 6.5 50 - - 5 - 12 34
SM 13.5 3 23 - 100 - - - -
Cable Gland and Locknut
Page <3> 07/06/10 V1.0
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual pr operty rights is granted. The Information is subject to change without notice and r eplaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC pro-Power is the registered trademark of the Group. © Premier Farnell plc 2010.
Article List
Part Number Table
Description Part Number Table
Gland, Brass, PG7, PK10 52015700 + 52003490
Gland, Brass, PG9, PK10 52015710 + 52003500
Gland, Brass, PG11, PK10 52015720 + 52003510
Gland, Brass, PG13.5, PK10 52015730 + 52003520
Gland, Brass, PG16, PK10 52015740 + 52003530
Gland, Brass, M12, PK10 53112000 + 52103000
Gland, Brass, M16, PK10 53112010 + 52103010
Gland, Brass, M20, PK10 53112020 + 52103020
Gland, Brass, M25, PK10 53112030 + 52103030
Part
Number
Part
Designation/
Size
Height
(mm) SW
(mm)
Thread
Length D
(mm) Pieces /PU Thickness
in
(mm)
Outer
Ø (mm)
Clamping
Range Ø
F (mm)
Overall
Length C
(mm)
52015740
+
52003530
MS 16 - 24 6.5 50 - - 8 - 14 35
SM 16 3 26 -
100
- - - -
53112000
+
52103000 12 x 1.5 - - 6.5 - - 3 - 7 26.5
- 15 - 3 16.5 - -
53112010
+
52103010 16 x 1.5 - - 7 - - 4.5 - 10 32
- 19 - 20.9 - - -
53112020
+
52103020 20 x 1.5 - - 8 50 - - 7 - 13 35.5
- 24 - 100 3.5 26.4 - -
53112030
+
52103030 25 x 1.5
- - 8 25 - - 9 - 17 37.5
- 30 - 100 4 33 - -
