XTH, XTK, XTL, XTM, XTV
www.vishay.com Vishay
Revision: 25-Jul-11 1Document Number: 42077
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wet Tantalum Capacitors
Cylindrical Body, Hermetically Sealed
FEATURES
• High temperature
• High voltage
• High capacitance
• Withstands high frequency vibration to 2000 Hz
• Hermetically sealed
• Long shelf life
• DSCC drawings 04032 and 04033
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 175 °C with proper
derating
Voltage Range: 8 VDC to 630 VDC at 85 °C
Reverse Voltage: None
Capacitance Range: 2 μF to 2200 μF
Tolerance Range:
- 15 % to + 50 % (standard for XTK, XTM, XTV)
- 15 % to + 75 % (standard for XTH, XTL)
± 20 % (special order)
Note
• For styles, terminal configurations, mounting methods and hardware, please see pages following standard ratings table
ORDERING INFORMATION
XTV 126 T 630 P 0 A
MODEL CAPACITANCE
CODE
CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING
CASE CODE INSULATION TERMINAL
CONFIGURATION
XTH
XTK
XTL
XTM
XTV
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
T = - 15 % to + 50 %
(XTK, XTM, XTV standard)
U = - 15 % to + 75 %
(XTH, XTL standard)
M = ± 20 %
(special order)
This is expressed
in volts. To
complete the
three-digit block,
zeros precede the
voltage rating.
P = Polar
(case negative)
R = Reverse
polarity
(case positive)
0 = Uninsulated
(standard)
4 = Teflon
(+ 175 °C limit)
See Styles
DIMENSIONS in inches [millimeters]
XTH-XTL-XTV XTK-XTM
TYPE D H
XTK - XTM 0.656 0.438 to 1.781
XTL - XTH 0.875 0.540 to 4.062
XTV 1.125 0.600 to 2.810
H
5/16 ± 1/16
(+)
DCase
negative
H
(+)
D
0.281
± 0.062
2.250
± 0.250
2.250
± 0.250
0.281
± 0.062
(-)
XTH, XTK, XTL, XTM, XTV
www.vishay.com Vishay
Revision: 25-Jul-11 2Document Number: 42077
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD RATINGS AND DIMENSIONS
CAPACITANCE MAX.
WORKING
VOLTAGE
TYP.
ESR
MAX. DCL AT
MAX. V
DC
(μA)
MAX.
Z
- 55 °C
MAX. % CAP.
CHANGE FROM
ROOM TEMP.
APPROX.
WEIGHT
MAX.
RIPPLE
120 Hz
RMS
- 55 °C
TO
+ 175 °C
SIZE
PART
NUMBER
D
+ 0.031
- 0.015
H
+ 0.062
- 0.062
(μF) + 125 °C + 175 °C (
) + 85 °C + 125 °C + 175 °C (
) - 55 °C + 85 °C + 175 °C (g) (mA)
8 V
DC
AT + 85 °C
70 7 5 10.0 30 45 60 60 - 60 + 30 + 30 14 137 0.656 0.438 XTK706(1)008P0A
140 7 5 5.0 50 75 100 30 - 60 + 30 + 30 15 213 0.656 0.562 XTM147(1)008P0A
10 V
DC
AT + 85 °C
50 8.5 7 10.0 25 37 50 75 - 60 + 30 + 30 14 137 0.656 0.438 XTK506(1)010P0A
100 8.5 7 5.0 45 67 90 40 - 60 + 30 + 30 15 213 0.656 0.562 XTM107(1)010P0A
12 V
DC
AT + 85 °C
580 10 8 1.5 135 197 270 20 - 90 + 20 + 35 48 550 1.125 0.600 XTV587(1)012P0A
850 10 8 1.5 135 197 270 20 - 90 + 20 + 35 50 550 1.125 0.600 XTV857(1)012P0A
1100 10 8 1.5 135 197 270 20 - 90 + 20 + 35 60 694 1.125 1.100 XTV118(1)012P0A
2200 10 8 1.5 135 197 270 20 - 90 + 20 + 35 82 694 1.125 1.100 XTV228(1)012P0A
18 V
DC
AT + 85 °C
35 15 12 10.0 30 45 60 85 - 60 + 30 + 30 14 137 0.656 0.438 XTK356(1)018P0A
70 15 12 5.0 50 75 100 45 - 60 + 30 + 30 15 213 0.656 0.562 XTM706(1)018P0A
120 15 12 2.8 50 75 100 30 - 60 + 15 + 40 26 328 0.875 0.540 XTL127(1)018P0A
240 15 12 2.5 80 120 160 20 - 60 + 15 + 40 32 390 0.875 0.732 XTH247(1)018P0A
390 15 12 1.5 165 227 330 20 - 85 + 20 + 35 48 550 1.125 0.600 XTV397(1)018P0A
560 15 12 1.5 165 227 330 20 - 85 + 20 + 35 50 550 1.125 0.600 XTV567(1)018P0A
900 15 12 1.5 165 227 330 20 - 85 + 20 + 35 68 694 1.125 1.100 XTV907(1)018P0A
1800 15 12 1.5 165 227 330 20 - 85 + 20 + 35 82 694 1.125 1.100 XTV188(1)018P0A
20 V
DC
AT + 85 °C
28 17.5 13 10.0 30 45 60 85 - 60 + 30 + 30 14 137 0.656 0.438 XTK286(1)020P0A
56 17.5 13 5.0 50 75 100 45 - 60 + 30 + 30 15 213 0.656 0.562 XTM566(1)020P0A
100 17.5 13 2.8 50 75 100 30 - 60 + 15 + 40 26 328 0.875 0.540 XTL107(1)020P0A
200 17.5 13 2.5 80 120 160 20 - 60 + 15 + 40 32 390 0.875 0.732 XTH207(1)020P0A
30 V
DC
AT + 85 °C
20 25 20 10.0 35 52 70 125 - 40 + 20 + 20 14 137 0.656 0.438 XTK206(1)030P0A
40 25 20 5.0 60 90 120 75 - 40 + 20 + 20 15 213 0.656 0.562 XTM406(1)030P0A
75 25 20 2.7 55 82 110 45 - 45 + 15 + 30 26 333 0.875 0.540 XTL756(1)030P0A
150 25 20 2.7 90 135 180 30 - 45 + 15 + 30 32 375 0.875 0.732 XTH157(1)030P0A
250 25 20 2.5 195 287 390 20 - 65 + 20 + 35 48 427 1.125 0.600 XTV257(1)030P0A
370 25 20 1.5 125 170 215 15 - 65 + 20 + 35 50 550 1.125 0.600 XTV377(1)030P0A
650 25 20 1.5 145 202 250 15 - 85 + 20 + 35 68 694 1.125 1.100 XTV657(1)030P0A
1300 25 20 1.5 190 282 375 10 - 85 + 20 + 35 82 694 1.125 1.100 XTV138(1)030P0A
35 V
DC
AT + 85 °C
20 30 23 10.0 35 52 72 125 - 40 + 20 + 20 14 137 0.656 0.438 XTK206(1)035P0A
40 30 23 5.0 60 90 120 75 - 40 + 20 + 20 15 213 0.656 0.562 XTM406(1)035P0A
60 30 23 2.7 55 82 110 45 - 45 + 10 + 30 26 333 0.875 0.540 XTL606(1)035P0A
Note
• Part number definitions:
(1) Tolerance code:
T = - 15 % to + 50 % (standard for XTK, XTM, XTV)
U = -15 % to + 75 % (standard for XTH, XTL)
M = ± 20 % (available by special order)
XTH, XTK, XTL, XTM, XTV
www.vishay.com Vishay
Revision: 25-Jul-11 3Document Number: 42077
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
40 V
DC
AT + 85 °C
190 34 27 2.5 195 297 400 20 - 55 + 20 + 35 48 427 1.125 0.600 XTV197(1)040P0A
290 34 27 2.5 200 300 400 20 - 55 + 20 + 35 50 427 1.125 0.600 XTV297(1)040P0A
500 34 27 1.5 200 300 400 20 - 75 + 20 + 35 68 694 1.125 1.100 XTV507(1)040P0A
1000 34 27 1.5 195 297 400 20 - 75 + 20 + 35 82 694 1.125 1.100 XTV108(1)040P0A
50 V
DC
AT + 85 °C
900 44 32 1.5 195 297 400 25 - 85 + 20 + 35 82 694 1.125 1.100 XTV907(1)050P0A
60 V
DC
AT + 85 °C
12 50 40 10.0 35 52 70 180 - 30 + 20 + 20 14 137 0.656 0.438 XTK126(1)060P0A
25 50 40 5.0 60 90 120 90 - 30 + 20 + 20 15 213 0.656 0.562 XTM256(1)060P0A
40 50 40 2.7 60 90 120 65 - 35 + 10 + 20 26 333 0.875 0.540 XTL406(1)060P0A
70 50 40 2.7 90 135 180 40 - 35 + 10 + 20 32 375 0.875 0.732 XTH706(1)060P0A
80 50 40 2.7 95 142 190 35 - 35 + 10 + 20 32 375 0.875 0.732 XTH806(1)060P0A
130 50 40 2.5 210 315 420 30 - 50 + 20 + 35 48 427 1.125 0.600 XTV137(1)060P0A
200 50 40 1.5 135 182 230 30 - 50 + 20 + 35 50 550 1.125 0.600 XTV207(1)060P0A
350 50 40 1.5 155 210 265 25 - 70 + 20 + 35 68 694 1.125 1.100 XTV357(1)060P0A
700 50 40 1.5 200 275 350 15 - 70 + 20 + 35 82 694 1.125 1.100 XTV707(1)060P0A
750 50 40 1.5 200 275 350 29 - 70 + 20 + 35 82 694 1.125 1.100 XTV757(1)060P0A
90 V
DC
AT + 85 °C
8.0 80 60 10.0 35 52 70 250 - 30 + 20 + 20 14 137 0.656 0.438 XTK805(1)090P0A
16 80 60 5.0 60 90 120 125 - 30 + 20 + 20 15 213 0.656 0.562 XTM166(1)090P0A
25 80 60 2.7 55 82 110 90 - 35 + 10 + 20 26 333 0.875 0.540 XTL256(1)090P0A
50 80 60 2.7 90 135 180 45 - 35 + 10 + 20 32 375 0.875 0.732 XTH506(1)090P0A
84 80 60 2.5 195 287 390 40 - 40 + 20 + 35 48 427 1.125 0.600 XTV846(1)090P0A
120 80 60 1.5 135 182 230 40 - 40 + 20 + 35 50 550 1.125 0.600 XTV127(1)090P0A
220 80 60 1.5 145 202 250 30 - 60 + 20 + 35 68 694 1.125 1.100 XTV227(1)090P0A
450 80 60 1.5 195 215 235 25 - 60 + 20 + 35 82 694 1.125 1.100 XTV457(1)090P0A
180 V
DC
AT + 85 °C
2.0 160 120 20.0 75 112 150 850 - 30 + 20 + 20 21 108 0.656 0.719 XTK205(1)180P0A
4.0 160 120 20.0 35 52 70 500 - 30 + 20 + 20 21 117 0.656 0.719 XTK405(1)180P0A
8.0 160 120 10.0 60 90 120 250 - 30 + 20 + 20 23 186 0.656 0.938 XTM805(1)180P0A
12 160 120 5.6 55 82 110 180 - 35 + 10 + 20 44 282 0.875 0.920 XTL126(1)180P0A
25 160 120 5.3 90 135 180 90 - 35 + 10 + 20 56 341 0.875 1.300 XTH256(1)180P0A
42 160 120 5.0 120 162 205 75 - 40 + 20 + 35 74 363 1.125 0.976 XTV426(1)180P0A
60 160 120 3.0 135 182 230 60 - 40 + 20 + 35 78 363 1.125 0.976 XTV606(1)180P0A
110 160 120 3.0 145 202 250 60 - 60 + 20 + 35 114 631 1.125 1.938 XTV117(1)180P0A
230 160 120 3.0 200 275 350 50 - 60 + 20 + 35 142 631 1.125 1.938 XTV237(1)180P0A
STANDARD RATINGS AND DIMENSIONS
CAPACITANCE MAX.
WORKING
VOLTAGE
TYP.
ESR
MAX. DCL AT
MAX. V
DC
(μA)
MAX.
Z
- 55 °C
MAX. % CAP.
CHANGE FROM
ROOM TEMP.
APPROX.
WEIGHT
MAX.
RIPPLE
120 Hz
RMS
- 55 °C
TO
+ 175 °C
SIZE
PART
NUMBER
D
+ 0.031
- 0.015
H
+ 0.062
- 0.062
(μF) + 125 °C + 175 °C (
) + 85 °C + 125 °C + 175 °C (
) - 55 °C + 85 °C + 175 °C (g) (mA)
Note
• Part number definitions:
(1) Tolerance code:
T = - 15 % to + 50 % (standard for XTK, XTM, XTV)
U = -15 % to + 75 % (standard for XTH, XTL)
M = ± 20 % (available by special order)
XTH, XTK, XTL, XTM, XTV
www.vishay.com Vishay
Revision: 25-Jul-11 4Document Number: 42077
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
270 V
DC
AT + 85 °C
2.5 240 180 30.0 35 52 70 750 - 30 + 20 + 20 28 112 0.656 1.031 XTK255(1)270P0A
5.0 240 180 15.0 55 82 110 375 - 30 + 20 + 20 31 179 0.656 1.375 XTM505(1)270P0A
8.0 240 180 8.3 55 82 110 270 - 35 + 10 + 20 62 266 0.875 1.270 XTL805(1)270P0A
16 240 180 8.3 90 135 180 135 - 35 + 10 + 20 81 320 0.875 1.865 XTH166(1)270P0A
28 240 180 7.5 120 162 205 80 - 40 + 20 + 35 100 339 1.125 1.350 XTV286(1)270P0A
40 240 180 7.5 135 182 230 100 - 40 + 20 + 35 104 339 1.125 1.350 XTV406(1)270P0A
75 240 180 4.5 145 202 250 90 - 60 + 20 + 35 160 608 1.125 2.812 XTV756(1)270P0A
150 240 180 4.5 195 215 235 75 - 60 + 20 + 35 202 608 1.125 2.812 XTV157(1)270P0A
360 V
DC
AT + 85 °C
2.0 320 240 40.0 35 52 70 1000 - 30 + 20 + 20 37 108 0.656 1.312 XTK205(1)360P0A
4.0 320 240 20.0 60 90 120 500 - 30 + 20 + 20 41 175 0.656 1.781 XTM405(1)360P0A
6.0 320 240 11.0 55 82 110 360 - 35 + 10 + 20 80 258 0.875 1.635 XTL605(1)360P0A
12 320 240 11.0 90 135 180 180 - 35 + 10 + 20 105 314 0.875 2.420 XTH126(1)360P0A
22 320 240 10.0 125 170 215 100 - 40 + 20 + 35 126 323 1.125 1.705 XTV226(1)360P0A
30 320 240 10.0 135 182 230 120 - 40 + 20 + 35 133 323 1.125 1.705 XTV306(1)360P0A
450 V
DC
AT + 85 °C
5.0 400 300 13.0 55 82 110 450 - 35 + 10 + 20 98 262 0.875 2.000 XTL505(1)450P0A
10 400 300 13.0 90 135 180 225 - 35 + 10 + 20 130 318 0.875 2.980 XTH106(1)450P0A
17 400 300 12.5 125 170 215 130 - 40 + 20 + 35 152 315 1.125 2.080 XTV176(1)450P0A
25 400 300 12.5 135 182 230 150 - 40 + 20 + 35 164 315 1.125 2.080 XTV256(1)450P0A
540 V
DC
AT + 85 °C
4.0 480 360 16.6 55 82 110 540 - 35 + 10 + 20 114 250 0.875 2.365 XTL405(1)540P0A
8.0 480 360 16.6 90 135 180 270 - 35 + 10 + 20 154 306 0.875 3.532 XTH805(1)540P0A
14 480 300 15.0 120 162 205 160 - 40 + 20 + 35 178 309 1.125 2.435 XTV146(1)540P0A
20 480 300 15.0 135 182 230 170 - 40 + 20 + 35 196 309 1.125 2.435 XTV206(1)540P0A
630 V
DC
AT + 85 °C
3.5 560 420 18.9 55 82 110 630 - 35 + 10 + 20 133 249 0.875 2.720 XTL355(1)630P0A
7.0 560 420 18.9 90 135 180 315 - 35 + 10 + 20 179 308 0.875 4.062 XTH705(1)630P0A
12 560 420 17.5 120 162 205 180 - 40 + 20 + 35 204 306 1.125 2.810 XTV126T630P0A
18 560 420 17.5 135 182 230 200 - 40 + 20 + 35 225 306 1.125 2.810 XTV186(1)630P0A
STANDARD RATINGS AND DIMENSIONS
CAPACITANCE MAX.
WORKING
VOLTAGE
TYP.
ESR
MAX. DCL AT
MAX. V
DC
(μA)
MAX.
Z
- 55 °C
MAX. % CAP.
CHANGE FROM
ROOM TEMP.
APPROX.
WEIGHT
MAX.
RIPPLE
120 Hz
RMS
- 55 °C
TO
+ 175 °C
SIZE
PART
NUMBER
D
+ 0.031
- 0.015
H
+ 0.062
- 0.062
(μF) + 125 °C + 175 °C (
) + 85 °C + 125 °C + 175 °C (
) - 55 °C + 85 °C + 175 °C (g) (mA)
Note
• Part number definitions:
(1) Tolerance code:
T = - 15 % to + 50 % (standard for XTK, XTM, XTV)
U = -15 % to + 75 % (standard for XTH, XTL)
M = ± 20 % (available by special order)
XTH, XTK, XTL, XTM, XTV
www.vishay.com Vishay
Revision: 25-Jul-11 5Document Number: 42077
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTH-L-V STYLES
STYLE A STYLE B STYLE C
STYLE D STYLE E STYLE F
STYLE G STYLE H STYLE J
STYLE K STYLE L STYLE M
H
0.3125 ± 0.0625
(+)
Top Bottom
D
0.3125
± 0.0625
0.375
± 0.0625
(+)
0.4375
DIA.
0.250
NOM.
BottomTop
0.3125 ± 0.0625
(+)
BottomTop
0.4063
± 0.0625
0.183
± 0.010
Wire hole
0.094 ± 0.010
0.025
± 0.005
0.3125 ± 0.0625
(+)
BottomTop
Negative screw lug is for indexing and
negative connection only
0.500 ± 0.0625
0.047
8-32UNC-2A
thread
0.3125 ± 0.0625
(+)
Top Bottom
0.5625 ± 0.0625
0.065 MAX.
1/4-20UNC-3A
thread
0.500
± 0.0625
DIA.
See Detail C in Mounting Methods table
for suggested mounting methods
(+)
Top Bottom
0.385 MAX.
0.075 MAX.
8-32UNC-2A
thread
See Detail D in Mounting Methods table
for suggested mounting method
0.3125 ± 0.0625
0.500
DIA.
MAX.
(+)
Top Bottom
0.500 ± 0.0625
0.047
Negative screw lug is for
index and negative
connection only
Wire hole
0.094 ± 0.010
0.3125 ± 0.0625
0.4063
± 0.0625
0.025
± 0.005
0.183
± 0.010
8-32UNC-2A
thread
0.3125
± 0.0625
(+)
0.385 MAX.
0.075 MAX.
0.183
± 0.010
0.025
± 0.005
0.4063
± 0.0625
See Detail D in Mounting
Methods table for suggested
mounting methods
8-32UNC-2A
thread
Wire hole
0.094 ± 0.010
0.500
DIA.
MAX.
Top Bottom
Top
Bottom
0.500
± 0.010
0.375 + 0.007
- 0.005
1/2-20UNF-2A THREAD
0.030 ± 0.020 XTH-XTL
0.060 ± 0.020 XTV
0.375
± 0.015
(+)
See Details B and E in Mounting Methods table
for suggested mounting methods
Top
Bottom
0.500
± 0.010
0.030 ± 0.020 XTH-XTL
0.060 ± 0.020 XTV
(+)
0.590
± 0.015
0.025
± 0.015
See Detail B and E in Mounting Methods table
for suggested mounting methods
1/2-20UNF-2A THREAD
0.375
± 0.015
0.375 + 0.007
- 0.005
0.3125 ± 0.0625
(+)
0.060
MAX.
0.125 MAX.
* Extends 0.125 on 0.875 DIA. units only
Top Bottom
XTH, XTK, XTL, XTM, XTV
www.vishay.com Vishay
Revision: 25-Jul-11 6Document Number: 42077
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
XTK-M STYLES
STYLE A STYLE B STYLE C STYLE D
STYLE E STYLE F STYLE G STYLE H
POSITIVE TERMINALS FOR XTK AND XTM
STYLE A STYLE B, C AND D STYLE E, G AND H STYLE F
NEGATIVE TERMINALS FOR XTK AND XTM
STYLE A STYLE B, E AND F STYLE C AND G STYLE D AND H
POS NEG
POS NEG POS NEG POS NEG
POS NEG
POS NEG POS NEG POS NEG
0.035 DIA.
2.250
± 0.025
H ± 0.062
0.281
± 0.062
0.062
0.125
Terminal detail
enlarged
0.125
0.500 ± 0.062 0.432
± 0.05
0.285
MAX.
0.812
± 0.062 0.555
± 0.015
3/8-24 UNF 2A
thread
H ± 0.062
0.020
± 0.015
0.432
± 0.05
0.285
MAX.
0.812
± 0.062 0.555
± 0.015
3/8-24 UNF 2
A
thread
H ± 0.062
0.020
± 0.015
0.100 MAX.
0.750
± 0.020
0.281
± 0.062 2.250
± 0.025
0.656
± 0.025
0.035 DIA.
0.656
± 0.025
Case negative
0.078 DIA.
hole
0.656
± 0.025
0.375
± 0.062
0.187
6-32NC 2A
thread
0.656
± 0.025
0.375
± 0.062
XTH, XTK, XTL, XTM, XTV
www.vishay.com Vishay
Revision: 25-Jul-11 7Document Number: 42077
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Standard mounting nut provided is plated steel. Stainless steel nut can be obtained by adding “/STN” suffix to part number.
XTH, XTL AND XTV MOUNTING METHODS
DETAIL A DETAIL B
DETAIL C DETAIL D
DETAIL E
04022 RATINGS AND CASE CODES
DSCC
DRAWING
04022
PIN
CAP.
(NOM.)
CAP.
TOLERANCE
DC LEAKAGE MAX.
(μA)
ESR MAX.
120 Hz
25 °C
IMPEDANCE
MAX.
CAPACITANCE
CHANGE
(%)
RIPPLE
CURRENT
1/
DIMENSION
L
± 0.062 (1.57)
FIGURE
(μF) (%) + 25 °C + 85 °C + 125 °C (
)(
) - 55 °C + 85 °C + 125 °C (mA) (INCHES)
8 VDC AT + 85 °C RATED; 9.2 VDC AT + 85 °C SURGE
01 70 + 50, - 15 6 30 48 12 60 - 60 + 30 + 30 137 0.438 (11.13) 1A
02 140 + 50, - 15 10 50 80 5.9 30 - 60 + 30 + 30 213 0.562 (14.27) 1A
10 VDC AT + 85 °C RATED; 11.5 VDC AT + 85 °C SURGE
03 50 + 50, - 15 5 25 40 11.7 75 - 60 + 30 + 30 137 0.438 (11.13) 1A
04 100 + 50, - 15 9 45 72 5.9 40 - 60 + 30 + 30 213 0.562 (14.27) 1A
20 VDC AT + 85 °C RATED; 23 VDC AT + 85 °C SURGE
05 28 + 50, - 15 6 30 48 12 85 - 40 + 20 + 20 137 0.438 (11.13) 1A
06 56 + 50, - 15 10 50 80 6 45 - 40 + 20 + 20 213 0.562 (14.27) 1A
30 VDC AT + 85 °C RATED; 34.5 VDC AT + 85 °C SURGE
07 20 + 50, - 15 7 35 56 11.7 125 - 40 + 20 + 20 137 0.438 (11.13) 1A
08 40 + 50, - 15 12 60 96 5.9 75 - 40 + 20 + 20 213 0.562 (14.27) 1A
0.065 ± 0.006
0.093 ± 0.031
Turret terminal
detail dimensions
(positive lead connections)
0.094 DIA. ± 0.004
For congurations A, B, C, D, E, F, G, H, J and M
0.020 ± 0.007
0.535 ± 0.010
Conguration
L only
Nut nearly ush
with ends of threads
0.090
For congurations K and L
0.390
0.385
0.511
0.505
Tapped 1/4-20UNC-2B
hole or internal
tooth lockwasher
and hex nut
For congurations E and H
Panel
Not recommended for
non-metal panels
For congurations F and J
Panel
Use 8-32 x 0.246 long
helical for non-ferrous
metal panel
0.625 DIA. counter
bore x 0.100.090 deep
(for head of weld screw)
0.375 MIN.
0.375 MIN. recommended
thickness
0.090
1" DIA.
counterbore
1.250" DIA.
counterbore
for XTV units
Conguration
L only
Secure to
100 in, lbs. torque
Panel must be
rigidly xed
For congurations K and L
May use rectangular hole
of similar dimensions
0.390
0.385
0.511
0.505
Conguration
L only
XTH, XTK, XTL, XTM, XTV
www.vishay.com Vishay
Revision: 25-Jul-11 8Document Number: 42077
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
60 VDC AT + 85 °C RATED; 69 VDC AT + 85 °C SURGE
09 12 + 50, - 15 7 35 56 12 180 - 30 + 20 + 20 137 0.438 (11.13) 1A
10 25 + 50, - 15 12 60 96 6 90 - 30 + 20 + 20 213 0.562 (14.27) 1A
90 VDC AT + 85 °C RATED; 103 VDC AT + 85 °C SURGE
11 8.0 + 50, - 15 7 35 56 12 250 - 30 + 20 + 20 137 0.438 (11.13) 1A
12 16 + 50, - 15 12 60 96 5.9 125 - 30 + 20 + 20 213 0.562 (14.27) 1A
180 VDC AT + 85 °C RATED; 207 VDC AT + 85 °C SURGE
13 4.0 + 50, - 15 7 35 56 24 500 - 30 + 20 + 20 117 0.719 (18.26) 1A
14 8.0 + 50, - 15 12 60 96 12 250 - 30 + 20 + 20 186 0.938 (23.83) 1A
270 VDC AT + 85 °C RATED; 310 VDC AT + 85 °C SURGE
15 2.5 + 50, - 15 7 35 56 36 750 - 30 + 20 + 20 112 1.031 (26.19) 1A
16 5.0 + 50, - 15 11 55 88 18 375 - 30 + 20 + 20 179 1.375 (34.93) 1A
360 VDC AT + 85 °C RATED; 414 VDC AT + 85 °C SURGE
17 2.0 + 50, - 15 7 35 56 48 1000 - 30 + 20 + 20 108 1.312 (33.32) 1A
18 4.0 + 50, - 15 12 60 96 24 500 - 30 + 20 + 20 175 1.781 (45.24) 1A
20 VDC AT + 85 °C RATED; 23 VDC AT + 85 °C SURGE
19 100 + 50, - 15 10 50 80 3.3 30 - 60 + 15 + 20 333 0.540 (13.72) 1B
20 200 + 75, - 15 16 80 128 2.8 20 - 60 + 15 + 20 375 0.732 (18.59) 1B
30 VDC AT + 85 °C RATED; 34.5 VDC AT + 85 °C SURGE
21 75 + 75, - 15 11 55 88 3.1 45 - 45 + 10 + 10 333 0.540 (13.72) 1B
22 150 + 75, - 15 13 90 104 3 30 - 45 + 10 + 10 375 0.732 (18.59) 1B
60 VDC AT + 85 °C RATED; 69 VDC AT + 85 °C SURGE
23 40 + 75, - 15 12 60 96 3.2 65 - 35 + 10 + 10 333 0.540 (13.72) 1B
24 80 + 75, - 15 19 95 152 3.1 35 - 35 + 10 + 10 375 0.732 (18.59) 1B
90 VDC AT + 85 °C RATED; 103 VDC AT + 85 °C SURGE
25 25 + 75, - 15 11 55 88 3.2 90 - 35 + 10 + 10 333 0.540 (13.72) 1B
26 50 + 75, - 15 18 90 144 3.1 45 - 35 + 10 + 10 375 0.732 (18.59) 1B
180 VDC AT + 85 °C RATED; 207 VDC AT + 85 °C SURGE
27 12 + 75, - 15 11 55 88 6.6 180 - 35 + 10 + 10 282 0.920 (23.37) 1B
28 25 + 75, - 15 18 90 144 6.2 90 - 35 + 10 + 10 341 1.300 (33.02) 1B
270 VDC AT + 85 °C RATED; 310 VDC AT + 85 °C SURGE
29 8.0 + 75, - 15 11 55 88 9.9 270 - 35 + 10 + 10 266 1.270 (32.36) 1B
30 16 + 75, - 15 18 90 144 9.8 135 - 35 + 10 + 10 320 1.865 (47.37) 1B
360 VDC AT + 85 °C RATED; 414 VDC AT + 85 °C SURGE
31 6.0 + 75, - 15 11 55 88 13 360 - 35 + 10 + 10 258 1.635 (41.53) 1B
32 12 + 75, - 15 18 90 144 13 180 - 35 + 10 + 10 314 2.420 (61.47) 1B
450 VDC AT + 85 °C RATED; 518 VDC AT + 85 °C SURGE
33 5.0 + 75, - 15 11 55 88 15 450 - 35 + 10 + 10 252 2.000 (50.80) 1B
34 10 + 75, - 15 18 90 144 15 225 - 35 + 10 + 10 308 2.980 (75.69) 1B
540 VDC AT + 85 °C RATED; 621 VDC AT + 85 °C SURGE
35 4.0 + 75, - 15 11 55 88 20 540 - 35 + 10 + 10 250 2.365 (60.07) 1B
36 8.0 + 75, - 15 18 90 144 20 270 - 35 + 10 + 10 308 3.532 (89.71) 1B
630 VDC AT + 85 °C RATED; 724 VDC AT + 85 °C SURGE
37 3.5 + 75, - 15 11 55 88 22 630 - 35 + 10 + 10 250 2.720 (69.09) 1B
04022 RATINGS AND CASE CODES
DSCC
DRAWING
04022
PIN
CAP.
(NOM.)
CAP.
TOLERANCE
DC LEAKAGE MAX.
(μA)
ESR MAX.
120 Hz
25 °C
IMPEDANCE
MAX.
CAPACITANCE
CHANGE
(%)
RIPPLE
CURRENT
1/
DIMENSION
L
± 0.062 (1.57)
FIGURE
(μF) (%) + 25 °C + 85 °C + 125 °C (
)(
) - 55 °C + 85 °C + 125 °C (mA) (INCHES)
XTH, XTK, XTL, XTM, XTV
www.vishay.com Vishay
Revision: 25-Jul-11 9Document Number: 42077
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
04022 RATINGS AND CASE CODES
DSCC
DRAWING
04022
PIN
CAP.
(NOM.)
CAP.
TOLERANCE
DC LEAKAGE MAX.
(μA)
ESR MAX.
120 Hz
25 °C
IMPEDANCE
MAX.
CAPACITANCE
CHANGE
(%)
RIPPLE
CURRENT
1/
DIMENSION
L
± 0.062 (1.57)
FIGURE
(μF) (%) + 25 °C + 85 °C + 125 °C (
)(
) - 55 °C + 85 °C + 125 °C (mA) (INCHES)
30 VDC AT + 85 °C RATED; 34.5 VDC AT + 85 °C SURGE
39 370 ± 20 18 125 180 1.7 15 - 65 + 20 + 25 550 0.600 (15.24) 1C
40 370 + 50, - 15 18 125 180 1.7 15 - 65 + 20 + 25 550 0.600 (15.24) 1C
41 650 ± 20 21 145 210 1.8 15 - 85 + 20 + 25 694 1.100 (27.94) 1C
42 650 + 50, - 15 21 145 210 1.8 15 - 85 + 20 + 25 694 1.100 (27.94) 1C
43 1300 ± 20 27 190 270 1.8 10 - 85 + 20 + 25 694 1.100 (27.94) 1C
44 1300 + 50, - 15 27 190 270 1.8 10 - 85 + 20 + 25 694 1.100 (27.94) 1C
60 VDC AT + 85 °C RATED; 69 VDC AT + 85 °C SURGE
45 200 ± 20 19 135 190 1.8 30 - 50 + 20 + 25 550 0.600 (15.24) 1C
46 200 + 50, - 15 19 135 190 1.8 30 - 50 + 20 + 25 550 0.600 (15.24) 1C
47 350 ± 20 22 155 220 1.8 25 - 70 + 20 + 25 694 1.100 (27.94) 1C
48 350 + 50, - 15 22 155 220 1.8 25 - 70 + 20 + 25 694 1.100 (27.94) 1C
49 700 ± 20 29 200 290 1.8 15 - 70 + 20 + 25 694 1.100 (27.94) 1C
50 700 + 50, - 15 29 200 290 1.8 15 - 70 + 20 + 25 694 1.100 (27.94) 1C
90 VDC AT + 85 °C RATED; 103 VDC AT + 85 °C SURGE
51 120 ± 20 19 135 190 1.7 40 - 40 + 20 + 25 550 0.600 (15.24) 1C
52 120 + 50, - 15 19 135 190 1.7 40 - 40 + 20 + 25 550 0.600 (15.24) 1C
53 220 ± 20 21 145 210 1.8 30 - 60 + 20 + 25 694 1.100 (27.94) 1C
54 220 + 50, - 15 21 145 210 1.8 30 - 60 + 20 + 25 694 1.100 (27.94) 1C
55 450 ± 20 29 195 290 1.7 35 - 60 + 20 + 25 694 1.100 (27.94) 1C
56 450 + 50, - 15 29 195 290 1.7 35 - 60 + 20 + 25 694 1.100 (27.94) 1C
180 VDC AT + 85 °C RATED; 207 VDC AT + 85 °C SURGE
57 42 ± 20 17 120 170 6 75 - 40 + 20 + 25 363 0.976 (24.79) 1C
58 42 + 50, - 15 17 120 170 6 75 - 40 + 20 + 25 363 0.976 (24.79) 1C
59 60 ± 20 19 135 190 3.4 60 - 40 + 20 + 25 363 0.976 (24.79) 1C
60 60 + 50, - 15 19 135 190 3.4 60 - 40 + 20 + 25 363 0.976 (24.79) 1C
61 110 ± 20 21 145 210 3.5 60 - 60 + 20 + 25 631 1.938 (49.23) 1C
62 110 + 50, - 15 21 145 210 3.5 60 - 60 + 20 + 25 631 1.938 (49.23) 1C
63 230 ± 20 29 200 290 3.5 50 - 60 + 20 + 25 631 1.938 (49.23) 1C
64 230 + 50, - 15 29 200 290 3.5 50 - 60 + 20 + 25 631 1.938 (49.23) 1C
270 VDC AT + 85 °C RATED; 310 VDC AT + 85 °C SURGE
65 28 ± 20 19 120 190 9 80 - 40 + 20 + 25 339 1.350 (34.29) 1C
66 28 + 50, - 15 19 120 190 9 80 - 40 + 20 + 25 339 1.350 (34.29) 1C
67 40 ± 20 19 135 190 8.8 100 - 40 + 20 + 25 339 1.350 (34.29) 1C
68 40 + 50, - 15 19 135 190 8.8 100 - 40 + 20 + 25 339 1.350 (34.29) 1C
69 75 ± 20 21 145 210 5.2 90 - 60 + 20 + 25 608 2.812 (71.42) 1C
70 75 + 50, - 15 21 145 210 5.2 90 - 60 + 20 + 25 608 2.812 (71.42) 1C
71 150 ± 20 28 195 280 5.4 75 - 60 + 20 + 25 608 2.812 (71.42) 1C
72 150 + 50, - 15 28 195 280 5.4 75 - 60 + 20 + 25 608 2.812 (71.42) 1C
360 VDC AT + 85 °C RATED; 414 VDC AT + 85 °C SURGE
73 22 ± 20 18 125 180 11.4 100 - 40 + 20 + 25 323 1.705 (43.31) 1C
74 22 + 50, - 15 18 125 180 11.6 100 - 40 + 20 + 25 323 1.705 (43.31) 1C
75 30 ± 20 19 135 190 11.7 120 - 40 + 20 + 25 323 1.705 (43.31) 1C
76 30 + 50, - 15 19 135 190 11.7 120 - 40 + 20 + 25 323 1.705 (43.31) 1C
450 VDC AT + 85 °C RATED; 518 VDC AT + 85 °C SURGE
77 17 ± 20 18 125 180 15 130 - 40 + 20 + 25 315 2.080 (52.83) 1C
78 17 + 50, - 15 18 125 180 15 130 - 40 + 20 + 25 315 2.080 (52.83) 1C
79 25 ± 20 19 135 190 15 150 - 40 + 20 + 25 315 2.080 (52.83) 1C
80 25 + 50, - 15 19 135 190 15 150 - 40 + 20 + 25 315 2.080 (52.83) 1C
540 VDC AT + 85 °C RATED; 621 VDC AT + 85 °C SURGE
81 14 ± 20 17 120 170 18 160 - 40 + 20 + 25 309 2.435 (61.85) 1C
82 14 + 50, - 15 17 120 170 18 160 - 40 + 20 + 25 309 2.435 (61.85) 1C
83 20 ± 20 19 135 190 18 170 - 40 + 20 + 25 309 2.435 (61.85) 1C
84 20 + 50, - 15 19 135 190 18 170 - 40 + 20 + 25 309 2.435 (61.85) 1C
630 VDC AT + 85 °C RATED; 724 VDC AT + 85 °C SURGE
85 12 ± 20 17 120 170 16 180 - 40 + 20 + 25 306 2.810 (71.37) 1C
86 12 + 50, - 15 17 120 170 16 180 - 40 + 20 + 25 306 2.810 (71.37) 1C
87 18 ± 20 19 135 190 16 200 - 40 + 20 + 25 306 2.810 (71.37) 1C
88 18 + 50, - 15 19 135 190 16 200 - 40 + 20 + 25 306 2.810 (71.37) 1C
XTH, XTK, XTL, XTM, XTV
www.vishay.com Vishay
Revision: 25-Jul-11 10 Document Number: 42077
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FIGURES
FIGURE 1A
FIGURE 1B
FIGURE 1C
CASE CIRCUIT
DIAGRAM
-+
DETAIL A
SOLDER LUG
TERMINAL
0.094 DIA. hole
± 0.010
0.183 ± 0.010
Weld
0.281
± 0.062
2.250
± 0.250
0.281
± 0.062
2.250
± 0.250
0.656
± 0.025
0.035
± 0.005
+
+
+
L
See 04022 Ratings table
0.313 ± 0.062
0.193
MAX.
See Detail A
0.535 DIA.
± 0.010
0.875 DIA.
+ 0.031
- 0.015
CASE NEG
0.094 ± 0.031
0.406
± 0.062
L
See 04022
Ratings table
0.025
± 0.005
0.094 DIA.
± 0.004
Solder llet
permissible
0.312 See Detail A
0.094 DIA.
± 0.004
1.125 DIA.
+ 0.031
- 0.016
CASE NEG
0.094 ± 0.031
0.406
L
See 04022
Ratings table
0.025
± 0.005
Solder llet
permissible
0.535 DIA.
± 0.010
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.