SENSITRON SEMICONDUCTOR SAC SERIES LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR 5011, - FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Glass passivated junction * 500W Peak Pulse Power capability on 10/1000 s waveform * Voltage -5.0 to 50 Volts * Glass passivated junction * Low incremental surge resistance * Excellent clamping capability 0.01% * Repetition rate (duty cycle): * Fast response time: typically less ps from 0 volts to BV DO-15 than 1.0 Dim Min Max Min Max * Ideal for data line application A 25.4 -- 1.000 -- * High temperature soldering guaranteed: B 5.50 7.62 0.217 0.300 265C/10 seconds/.375", (9.5mm) lead C 0.71 0.864 0.028 0.034 length, 5lbs., (2.3kg) tension D 2.60 3.60 0.102 0.142 In mm In inch * MECHANICAL DATA *Case:JEDEC DO-15 Molded plastic over glass passivated junction *Terminals: Plated Axial leads, solderable per Dimensions in inches (milimeters) MIL-STD-750, Method 2026 * Color band denoted positive end (cathode) *Polarity: except Bipolar Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation on 10/1000 s waveform (NOTE 1,Fig.1) Peak Pulse Current of on 10/1000 s waveform (NOTE 1,Fig 3) Steady State Power Dissipation at Tl=75 C Lead Lengths.375", 9.5mm Operatings and Storage Temperature Range SYMBOL Pppm VALUE Minimum 500 UNITS Watts Ippm SEE TABLE 1 Amps Pm(AV) 3.0 Watts Tj, Tstg -55 to +175 C NOTES: 1.Non-repetitive current pulse, per Fig.3 and derated above Ta=25 C per Fig.2. * ! ! !!"#$* * % & '(&)*+,,---. & ./0*12&%# %3 & ./0* SENSITRON SEMICONDUCTOR SAC SERIES LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR 5011, - 500 Watt Low Capacitance TVS PART NUMBER * * * * * SAC5.0 SAC6.0 SAC7.0 SAC8.0 SAC8.5 SAC10 SAC12 SAC15 SAC18 SAC22 SAC26 SAC30 SAC36 SAC45 SAC50 REVERSE STANDOFF VOLTAGE VRWM (V) 5.00 6.00 7.00 8.00 8.50 10.00 12.00 15.00 18.00 22.00 26.00 30.00 36.00 45.00 51.00 MAXIMUM BREAKDOW JUNCTION N VOLTAGE CAPACITANCE VBR(V) @ 0 VOLTS (pF) MIN. @ IT 7.60 30 7.90 30 8.33 30 8.89 30 9.44 30 11.10 30 13.30 30 16.70 30 20.00 30 24.40 30 28.00 30 33.30 30 40.00 30 50.00 30 55.50 30 WORKING INVERSE BLOCKING VOLTAGE VWIB(VOLTS) 75 75 75 75 75 75 75 75 75 75 75 75 75 150 150 MAXIMUM PEAK REVERSE CLAMPING VOLTAGE @ PULSE LEAKAGE CURREN @ VRWM Ipp=5.0A T IPP (A) Vc(V) IR (A) 300 10.0 44.0 300 11.2 41.0 12.6 38.0 300 13.4 36.0 100 14.0 34.0 50 16.3 29.0 5 19.0 25.0 5 23.6 20.0 5 28.8 15.0 5 35.4 14.0 5 42.3 11.1 5 48.6 10.0 5 60.0 8.6 5 77.0 6.8 5 88.0 5.8 5 * ! ! !!"#$* * % & '(&)*+,,---. & ./0*12&%# %3 & ./0* SENSITRON SEMICONDUCTOR SAC SERIES LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR 5011, - TA=25 unless otherwise noted 100 Pig.1 - Peak Pulse Power Rating Curve 10 Impulse Exponential Decay PPK".5" 1 td PPK td Half Sine td=7tp PPK Square td Current Waveforms 0.1s 1.0s 87.5 75 Peak Power (single pulse) 62.5 50 37.5 25 12.5 0 10s 100s 1.0ms 10ms td - Pulse Width (sec.) 0 25 50 75 100 125 150 175 TL Lead Temperature (C) Fig.3 - Pulse Waveform Fig. 4 - AC Line Protection Application 150 TJ = 25C tr = 10sec. IPPM - Peak Pulse Current,% I Average Power TA=25C 0.1 * * * * * Fig.2-Power Derating Curve 100 Non-repetitive Pulse Waveform shown in Fig. 3 Percentage of Rated Power(%) IPPM-Peak Pulse Power (kW) 30 Pulse Width (t d) Peak Value IPPM 100 is defined as the point where the peak current decays to 50% of I PPM Low Capacitance TVS Half Value- I PPM 2 50 10/1000sec.Waveform as defined by R.E.A. td 0 0 1.0 3.0 2.0 t - Time(ms) 3.0 4.0 4.0 Application Note: Device must be used with two units in parallel,opposite in polarity as shown in circuit for AC signal line protection. * ! ! !!"#$* * % & '(&)*+,,---. & ./0*12&%# %3 & ./0* SENSITRON SEMICONDUCTOR SAC SERIES LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR 5011, - DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. * * * * * * ! ! !!"#$* * % & '(&)*+,,---. & ./0*12&%# %3 & ./0*