PTZ10B
Diodes
Rev.E 1/4
Zener diode
PTZ10B
z
Applications
z
Dimensions (Unit : mm)
z
Land size figure (Unit : mm)
V olt age regulation
㪧㪤㪛㪪
㪉㪅
㪋㪅
㪉㪅
Symbol Unit
Pm
Tj
Tstg
Parameter W
unction temperature
tora ge temperature
ower di ssipation Limits
150
-55 to +150
1000
J
S
P
z
Features
1) Small power mo ld type. (PMDS)
2) High ESD tole rance
z
Construction
Silicon epitaxialplanar
z
Structure
㪩㪦㪟㪤㩷㪑㩷㪧㪤㪛
㪜㪚㪪㪦㪛㪄㪈㪇㪍
㪤㪸㫅㪽㪸㪺㫋㫌㩷㪛㪸㫋
㪯㪅㪧㪫㪈㪇㪙
㪇㪅㪈㫧㪇㪅㪇㪉
䇭䇭䇭㩷㪇㪅㪈
㪉㪅㪍㫧㪇㪅㪉
㪉㪅㪇㫧㪇㪅
㪌㪅㪇㫧㪇㪅㪊
㪈㪅㪉㫧㪇㪅
㪋㪅㪌㫧㪇㪅
㪈㪅㪌㫧㪇㪅
z
T a ping dimensions (Unit : mm)
㪋㪅㪇㫧㪇㪅㪈㪉㪅㪐㫧㪇㪅㪈
㪋㪅㪇㫧㪇㪅㪈
㪉㪅㪇㫧㪇㪅㪇㪌
㱢㪈㪅㪌㪌㫧㪇㪅㪇㪌
㪌㪅㪌㫧㪇㪅㪇㪌
㪈㪅㪎㪌㫧㪇㪅㪈
㪈㪉㫧㪇㪅
㱢㪈㪅㪌
㪐㪅㪌㫧㪇㪅㪈
㪇㪅㪊
㪌㪅㪊㫧㪇㪅㪈
䇭㩷㩷㩷㩷㩷㩷㪇㪅㪇㪌
㪉㪅㪏㪤
z
Absolute maximum ratings (Ta=25qC)
PTZ10B
Diodes
Rev.E 2/4
z
Electrical characteristics (Ta=25qC)
MIN. TYP. MAX. Iz(mA) Max. Iz(mA) MAX. VR(V) TYP. Iz(mA) MIN. Test Condition
PTZ 3.6B 3.600 3.813 4.000 40 15 40 60 1.0 -2.8 40
Z 3.9B 3.900 4.136 4.400 40 15 40 40 1.0 -2.4 40
Z 4.3B 4.300 4.572 4.800 40 15 40 20 1.0 -2.1 40
Z 4.7B 4.700 4.924 5.200 40 10 40 20 1.0 -1.7 40
Z 5.1B 5.100 5.368 5.700 40 840 20 1.0 -0.6 40
Z 5.6B 5.600 5.856 6.300 40 840 20 1.5 1.4 40
Z 6.2B 6.200 6.509 7.000 40 640 20 3.0 2.5 40
Z 6.8B 6.800 7.280 7.700 40 640 20 3.5 3.2 40
Z 7.5B 7.500 7.889 8.400 40 440 20 4.0 4.2 40
Z 8.2B 8.200 8.655 9.300 40 440 20 5.0 5.0 40
Z 9.1B 9.100 9.747 10.200 40 640 20 6.0 5.9 40
0B 10.000 10.310 11.200 40 640 10 7.0 6.9 40
1B 11.000 11.510 12.300 20 820 10 8.0 7.9 20
2B 12.000 12.500 13.500 20 820 10 9.0 8.7 20
3B 13.300 13.820 15.000 20 10 20 10 10.0 10.1 20
5B 14.700 15.350 16.500 20 10 20 10 11.0 11.8 20
6B 16.200 16.860 18.300 20 12 20 10 12.0 13.3 20
8B 18.000 19.000 20.300 20 12 20 10 13.0 15.0 20
0B 20.000 20.820 22.400 20 14 20 10 15.0 17.4 20
2B 22.000 23.850 24.500 10 㪈㪋 10 10 17.0 19.4 10
4B 24.000 25.310 27.600 10 㪈㪍 10 10 19.0 21.6 10
7B 27.000 28.700 30.800 10 㪈㪍 10 10 21.0 24.6 10
0B 30.000 31.570 34.000 10 㪈㪏 10 10 23.0 27.5 10
3B 33.000 34.950 37.000 10 㪈㪏 10 10 25.0 30.8 10
6B 36.000 39.240 40.000 10 㪉㪇 10 10 27.0 37.0 10
ϧ)The zener voltage(Vz) is measured 40ms aft er power is supplied.
Ϩ)The operating resistances(Zz,Z zk) are measured by superimposing a minute alternating current
on the regulated current(Iz)
ESD breakdown voltage
ESD(kV)
30kV
C=150pF
R=330ȍ
forward
and
reverse:
10 times
Temperature
coeficiency
*Ȗz(mV/)
TYP.
Symbol
Zener voltageVz(V)
Operating
resistance
Zz(ȍ)
Reverse current
IR(μA)
PT
PT
PT
PT
PT
PT
PT
PT
PT
PT
PTZ 1
PTZ 1
PTZ 1
PTZ 1
PTZ 1
PTZ 1
PTZ 1
PTZ 2
PTZ 2
PTZ 2
PTZ 2
PTZ 3
PTZ 3
PTZ 3
(
(
z
Marking (TYPE NO.)
TYPE TYPENO. TYPE TYPENO. TYPE 㪫㪰㪧㪜䇭㪥㪦㪅
PTZ3.6B
3.6B
PTZ8.2B
8.2B
PTZ20B
20B
PTZ3.9B
3.9B
PTZ9.1B
9.1B
PTZ22B
22B
PTZ4.3B
4.3B
PTZ10B
10B
PTZ24B
24B
PTZ4.7B
4.7B
PTZ11B
11B
PTZ27B
27B
PTZ5.1B
5.1B
PTZ12B
12B
PTZ30B
30B
PTZ5.6B
5.6B
PTZ13B
13B
PTZ33B
33B
PTZ6.2B
6.2B
PTZ15B
15B
PTZ36B
36B
PTZ6.8B
6.8B
PTZ16B
PTZ7.5B
7.5B
PTZ18B
18B
16B
PTZ10B
Diodes
Rev.E 3/4
z
Electrical characteristic curves (Ta=25qC)
㪧㪦㪮㪜㪩㩷㪛㪠㪪㪪㪠㪧㪘㪫㪠㪦㪥㪑㪧㪻㩿㫄㪮㪀
㪫㪠㪤㪜㪑㫋㩿㫄㫊㪀
㪧㪩㪪㪤㪄㪫㪠㪤㪜㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿䋦㪆㷄㪀
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀
㱏㫑㪄㪭㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪫㪠㪤㪜㪑㫋㩿㫊㪀
㪩㫋㪿㪄㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪫㪩㪘㪥㪪㪠㪜㪥㪫
㪫㪟㪘㪜㪩㪤㪘㪣㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪩㫋㪿㩷㩿㷄㪆㪮㪀 㪩㪜㪭㪜㪩㪪㪜㩷㩷㩷㪪㪬㪩㪞㪜㩷㪤㪘㪯㪠㪤㪬㪤
㪧㪦㪮㪜㪩㪑㪧㪩㪪㪤㩿㪮㪀
㪇㪅㪈
㪈㪇
㪈㪇㪇
㪈㪇㪇㪇
㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈㪇 㪈㪇㪇 㪈㪇㪇㪇
㪩㫋㪿㩿㫁㪄㪸㪀
㪩㫋㪿㩿㫁㪄㪺㪀
㪈㫄㫊
㪠㪤㪔㪈㪇㫄㪘 㪠㪝㪔㪈㪇㪇㫄㪘
㪊㪇㪇㫌㫊
㫋㫀㫄㪼
Mounted on epoxy board
㪉㪇㪇
㪋㪇㪇
㪍㪇㪇
㪏㪇㪇
㪈㪇㪇㪇
㪈㪉㪇㪇
㪉㪌 㪌㪇 㪎㪌 㪈㪇㪇 㪈㪉㪌 㪈㪌㪇
㪈㪇
㪈㪇㪇
㪈㪇㪇㪇
㪈㪇㪇㪇㪇
㪇㪅㪇㪇㪈 㪇㪅㪇㪈 㪇㪅㪈 㪈㪇 㪈㪇㪇
㪧㪩㪪㪤
㪇㪅㪇㪇㪈
㪇㪅㪇㪈
㪇㪅㪈
㪈㪇
㪈㪇㪇
㪈㪇 㪈㪌 㪉㪇 㪉㪌 㪊㪇 㪊㪌 㪋㪇 㪋㪌
㪊㪅㪍
㪉㪋
㪉㪇
㪈㪏
㪈㪍㪈㪌㪈㪊㪈㪉㪈㪈㪈㪇㪐㪅㪈㪏㪅㪉㪎㪅㪌㪌㪅㪍 㪍㪅㪏㪍㪅㪉
㪌㪅㪈
㪋㪅㪎
㪋㪅㪊
㪊㪅㪐
㪊㪍
㪊㪇
㪉㪎 㪊㪊
㪉㪉
㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀
㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪄㪇㪅㪇㪏
㪄㪇㪅㪇㪍
㪄㪇㪅㪇㪋
㪄㪇㪅㪇㪉
㪇㪅㪇㪉
㪇㪅㪇㪋
㪇㪅㪇㪍
㪇㪅㪇㪏
㪇㪅㪈
㪇㪅㪈㪉
㪇㪉㪇㪊㪇㪋
㪄㪌
㪈㪇
㪈㪌
㪉㪇
㪉㪌
㪊㪇
㪊㪌
㪋㪇
㪘㪤㪙㪠㪜㪥㪫㩷㪫㪜㪤㪧㪜㪩㪘㪫㪬㪩㪜㪑㪫㪸㩿㷄㪀
㪧㪻㪄㪫㪸䇭㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪫㪜㪤㪧㪅㪚㪦㪜㪝㪝㪠㪚㪠㪜㪥㪚㪜㪑㱏㫑㩿㫄㪭㪆㷄㪀
PTZ10B
Diodes
Rev.E 4/4
㪈㪇
㪈㪌
㪉㪇
㪉㪌
㪊㪇
㪚㪔㪉㪇㪇㫇
㪩㪔㪇㱅
㪚㪔㪈㪇㪇㫇
㪩㪔㪈㪅㪌㫂
㪚㪔㪈㪌㪇㫇
㪩㪔㪊㪊㪇㱅
㪥㫆㩷㪹㫉㪼㪸㫂㩷㪸㫋㩷㪊㪇㫂㪭
㪇㪅㪇㪇㪈
㪇㪅㪇㪈
㪇㪅㪈
㪈㪇
㪈㪇㪇
㪈㪇㪇㪇
㪇㪈㪉㪊㪋㪌㪍㪎
㪫㪸㪔㪉㪌㷄
㪫㪸㪔㪄㪉㪌㷄
㪫㪸㪔㪎㪌㷄
㪫㪸㪔㪈㪉㪌㷄
㪫㪸㪔㪈㪌㪇㷄
㪈㪇㪇
㪈㪇㪇㪇
㪈㪇㪇㪇㪇
㪇㪈㪉㪊㪋㪌㪍
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㫑㩿㪭㪀
㪭㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀
㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀
㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜䋺㪭㪩㩿㪭㪀
㪭㪩㪄㪠㪩㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥
㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀
㪩㪜㪭㪜㪩㪪㪜㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㪩㩿㪭㪀
㪭㪩㪄㪚㫋㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪭㫑㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪱㪜㪥㪜㪩㩷㪭㪦㪣㪫㪘㪞㪜㪑㪭㫑㩿㪭㪀
㪩㪜㪭㪜㪩㪪㪜㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㪩㩿㫅㪘㪀
㪠㪩㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪚㪘㪧㪘㪚㪠㪫㪘㪥㪚㪜㩷㪙㪜㪫㪮㪜㪜㪥
㪫㪜㪩㪤㪠㪥㪘㪣㪪㪑㪚㫋㩿㫇㪝㪀
㪚㫋㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
㪱㪜㪥㪜㪩㩷㪚㪬㪩㪩㪜㪥㪫㪑㪠㫑㩿㫄㪘㪀
㪱㫑㪄㪠㫑㩷㪚㪟㪘㪩㪘㪚㪫㪜㪩㪠㪪㪫㪠㪚㪪
㪛㪰㪥㪘㪤㪠㪚㩷㪠㪤㪧㪜㪛㪘㪥㪚㪜㪑㪱㫑㩿㱅㪀
㪽㪔㪈㪤㪟䌺
㪇㪅㪇㪇㪈
㪇㪅㪇㪈
㪇㪅㪈
㪈㪇
㪈㪇㪇
㪈㪇 㪈㪈 㪈㪉
㪫㪸㪔㪉㪌㷄
㪫㪸㪔㪈㪉㪌㷄
㪫㪸㪔㪎㪌㷄
㪫㪸㪔㪄㪉㪌㷄
㪫㪸㪔㪈㪌㪇㷄
㪇㪅㪈
㪇㪅㪉
㪇㪅㪊
㪇㪅㪋
㪇㪅㪌
㪇㪅㪍
㪇㪅㪎
㪇㪅㪏
㪇㪅㪐
㪫㪸㪔㪉㪌㷄
㪭㪩㪔㪎㪅㪇㪭
㫅㪔㪊㪇㫇㪺㫊
㪘㪭㪜㪑㪇㪅㪈㪉㪏㫅㪘
㪊㪌㪇
㪊㪍㪇
㪊㪎㪇
㪊㪏㪇
㪊㪐㪇
㪋㪇㪇
㪋㪈㪇
㪋㪉㪇
㪋㪊㪇
㪋㪋㪇
㪋㪌㪇
㪘㪭㪜㪑㪊㪏㪍㪅㪋㫇㪝
㪫㪸㪔㪉㪌㷄
㪽㪔㪈㪤㪟㫑
㪭㪩㪔㪇㪭
㫅㪔㪈㪇㫇㪺㫊
㪈㪇㪅㪈
㪈㪇㪅㪉
㪈㪇㪅㪊
㪈㪇㪅㪋
㪈㪇㪅㪌
㪈㪇㪅㪍
㪘㪭㪜㪑㪈㪇㪅㪊㪈㪭
㪫㪸㪔㪉㪌㷄
㪠㪱㪔㪋㪇㫄㪘
㫅㪔㪊㪇㫇㪺㫊
㪇㪅㪈
㪈㪇
㪈㪇㪇
㪇㪅㪈 㪈㪇
㪜㪣㪜㪚㪫㪩㪦㪪㪫㪘㪫㪠㪚
㪛㪠㪪㪚㪟㪘㪩㪞㪜㩷㪫㪜㪪㪫㩷㪜㪪㪛㩿㪢㪭㪀
㪜㪪㪛㩷㪛㪠㪪㪧㪜㪩㪪㪠㪦㪥㩷㪤㪘㪧
Datasheet
Datasheet
Notice-PGA-E Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
Notice
Precaution on using ROHM Products
1. Our Products are designed and manufactured for applicatio n in ordinar y elec tronic eq uipm ents (such as AV equipment ,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred b y you or third parties arisin g from the use of an y ROHM’s Prod ucts for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN USA EU CHINA
CLASS CLASS CLASSb CLASS
CLASS CLASS
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe d esign against the physical injur y, damage to any property, which
a failure or malfunction of our Products may cause. T he following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliabili ty, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlig ht or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing comp onents, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flu x (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4. The Products are not subject to radi ation-proof design.
5. Please verify and confirm ch aracteristics of the final or mounted products in using the Products.
6. In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7. De-rate Power Dissipation (Pd) depending o n Ambient temper ature (Ta). When us ed in se aled area, confirm the actual
ambient temperature.
8. Confirm that operation temperature is within the specified range described in the product specification.
9. ROHM shall not be in any way responsible or liable for fail ure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1. When a highly active halogen ous (chlori ne, bromine, etc.) flu x is used, the residue of flux may negativel y affect product
performance and reliability.
2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must
be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,
please consult with the ROHM represe ntative in advance.
For details, please refer to ROHM Mounting specification
Datasheet
Datasheet
Notice-PGA-E Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
Precautions Regarding Application Examples and External Circuits
1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the
characteristics of the Products and external components, including transient characteristics, as well as static
characteristics.
2. You agree that application notes, reference designs, and associated data and information contained in this document
are presented only as guidance for Products use. Therefore, in case you use such information, you are solely
responsible for it and you must exercise you r own indepen dent verificatio n and judgmen t in the use of such information
contained in this document. ROHM shall not be i n an y way responsible or lia ble for any damages, expenses or losses
incurred by you or third parties arising from the use of such information.
Precaution for Electrostatic
This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper
caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be
applied to Products. Please t ake special care under dry condit ion (e.g. Grounding of human body / equipment / sol der iron,
isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).
Precaution for Storage / Transportati on
1. Product performance and soldered connections may deteriorate if the Products are stored in the pl aces where:
[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2
[b] the temperature or humidity exceeds those recommende d b y ROHM
[c] the Products are exposed to direct sunshine or condensation
[d] the Products are exposed to high Electrostatic
2. Even under ROHM recommended storage c ondition, solderabil ity of products out of recommended storage time perio d
may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is
exceeding the recommen de d storage time period.
3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads
may occur due to excessive s t ress applied when dropping of a carton.
4. Use Products within the specified tim e after opening a humidit y barrier bag. Baking is required before using Products of
which storage time is exceeding the recommended storage time period.
Precaution for Product Label
QR code printed on ROHM Products label is for ROHM’s internal use only.
Precaution for Disposition
When disposing Products pl ease dispose them properly using an authorized industry waste company.
Precaution for Foreign Exchange and Foreign Trade act
Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign
trade act, please consult with ROHM in case of export.
Precaution Regarding Intellectual Property Rights
1. All information and data including but not limited to application example contained in this document is for reference
only. ROHM does not warrant that foregoi ng information or data will not infringe any int ellectual property rights or any
other rights of any third party regarding such information or data.
2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the
Products with other articles such as components, circuits, systems or external equipment (including software).
3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any
third parties with respect to the Products or the information contained i n this document. Provide d, however, that ROHM
will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to
manufacture or sell products containing the Products, subject to the terms and conditions herein.
Other Precaution
1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.
2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written
consent of ROHM.
3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the
Products or this document for any military purposes, including b ut not limited to, the development of mass-destruction
weapons.
4. The proper names of companies or products described in this document are trademarks or registered trademarks of
ROHM, its affiliated companies or third parties.
DatasheetDatasheet
Notice – WE Rev.001
© 2015 ROHM Co., Ltd. All rights reserved.
General Precaution
1. Before you use our Pro ducts, you are requested to care fully read this document and fully understand its contents.
ROHM shall n ot be in an y way responsible or liabl e for fa ilure, malfunction or acci dent arising from the use of a ny
ROHM’s Products against warning, caution or note contained in this document.
2. All information contained in this docume nt is current as of the issuing date and subj ect to change without any prior
notice. Before purchasing or using ROHMs Products, please confirm the la test information with a ROHM sale s
representative.
3. The information contained in this doc ument is provi ded on an “as is” basis and ROHM does not warrant that all
information contained in this document is accurate an d/or error-free. ROHM shall not be in an y way responsible or
liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccur acy or errors of or
concerning such information.