CERMET SINGLE TURN TYPE RoHS compliant JP-30B Basic construction Cermet single turn type FEATURES OCost effective (In house comparison) OHigh resoluiion (Essentially infinite) ORoHS compliant STANDARD SPECIFICATIONS Item Part number % Resistance torelance Independent linearity % Effective electrical angle 300 +- 20 0 Power rating (at 40 C) JP-30BFor manual setting Vrms Insulation resistance M minimum Rotational torque Stop strength Nominal resistance value 500, 1 k, 2 k, 5 k, 10 k, 20 k, 50 k, 100 k W Dielectric strength Series name 0.5 300 1 Mechanical angle JP-30B-1k 2 Essentially infinite Resolution PART NUMBER DESIGNATION JP-30B 1.5 1000 1 min 1000 (at DC500 V) mN*m {gf*cm} 2.94 ~ 14.7 {30 ~ 150} N*m {kgf*cm} maximum 0.490 {5} Peak noise 2 % or 100 , whichever is greater Temp. coefficient of resistance 10-6/C Operating temp. range C Maximum rotational speed r/min Rotational life Net weight Strength of tighten screw 150 - 55 ~ 85 150 100 thousand cycles g Approx. 26 0.98 N*m {10 kgf*cm} maximum Perform soldering of the terminals at 380 C for no more three seconds, and avoid applying excess heat. Also, avoid applying outside force to the terminals. In case of using multiturn potentiometers, when rotating the shaft to the mechanical limit, apply torque below the strength of the stopper. Also, give due consideration to thrust and radial loading. JP-30B POTENTIOMETERS LIST OF PART NUMBERS Application Series name Nominal resistance value Part number JP-30B 500 1 k 2 k 5 k 10 k 20 k 50 k 100 k JP-30B 500 JP-30B 1 k JP-30B 2 k JP-30B 5 k JP-30B 10 k JP-30B 20 k JP-30B 50 k JP-30B 100 k For manual setting Verify the above part numbers when placing orders. RATED POWER DERATING CURVE 120,1$/5(6,67$1&(9$/8(5$7(' 92/7$*(5$7('&855(17 JP-30B Nominal resistance value Rated voltage Rated current V mA 500 27.3 54.7 1k 38.7 38.7 2k 54.7 27.3 5k 86.6 17.3 10k 122 12.2 20 k 173 8.66 50 k 273 5.47 100 k 387 3.87 100 Power rating ratio % +40 -55 OUTLINE DIMENSIONS Unless otherwise specified, tolerance: 0.5 (Unit: mm) (40.5) OJP-30B 26 For manual setting ax. 10.5 1m R2 30 2.90.1 120.3 0.3 1 9 5 2 3 1 14.5 max. 90.3 8 1 1.50.2 305 0 6 -0.05 5 30 +85 Ambient temperature M 9 (P = 0.75) (Accessories) .9 12 M9 P=0.75 12 1. Nut 9.4 0.5 2 (1) 2. Washer 2.50.3