134 Marbledale Road, Tuckahoe, NY 10707 phone 914-793-0700 fax 914-793-4527 OK Industries Div. of Jonard Industries sales@jonard.com www.jonard.com www.okindustries.com Using the Jonard SD-61 6-in-1 Screwdriver The Jonard SD-61 screwdriver is 6 tools in one. The SD-61 tool is shipped assembled with the #1 Phillips head screwdriver and ready for use. Each bit provided with the SD-61 is double ended. Pull the bit out of the metal shaft to expose the opposite end of the bit. The metal shaft is removable from the handle. Pull on the metal shaft to remove it from the handle. The tool consists of four components; the cushioned grip handle, metal shaft with a 1/4" Nut Driver on one end and a 5/16" Nut Driver on the other end plus two reversible bits (SD-RB1 and SD-RB2). The SD-RB1 bit has a #1 Phillips head on one side, 3/16" Flat blade on the other and fits into the 1/4" hex side of the metal shaft. The SD-RB2 has a #2 Phillips head on one side, 9/32" flat blade on the opposite side and is made to fit into the 5/16" hex end on the metal shaft. To use the tool as a 1/4" or 5/16" Nut Driver simply insert the shaft and omit any bits.