1/29February 2003
OUTPUT CURRENT TO 1.5A
OUTPUT VOLTAGES OF 5; 5.2; 6; 8; 8.5; 9;
12; 15; 18; 24V
THERMAL OVERLOAD PROTECTION
SHORT CIRCUIT PROTECTION
OUTPUT TRANSITION SOA PROTECTION
DESCRIPTION
The L7800 series of three-terminal positive
regulators is available in TO-220, TO-220FP,
TO-3 and D2PAK packages and several fixed
output voltages, making it useful in a wide range of
applications. These regulators can provide local
on-card regulation, eliminating the distribution
problems associated with single point regulation.
Each type employs internal current limiting,
thermal shut-down and safe area protection,
making it essentially indestructible. If adequate
heat sinking is provided, they can deliver over 1A
output current. Although designed primarily as
fixed voltage regulators, these devices can be
used with external components to obtain
adjustable voltage and currents.
L7800
SERIES
POSITIVE VOLTAGE REGULATORS
SCHEMATIC DIAGRAM
TO-220
D2PAK
TO-220FP
TO-3
L7800 SERIES
2/29
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is
not implied.
THERMAL DATA
SCHEMATIC DIAGRAM
Symbol Parameter² Value Unit
VIDC Input Voltage for VO= 5 to 18V 35 V
for VO= 20, 24V 40
IOOutput Current Internally Limited
Ptot Power Dissipation Internally Limited
Tstg Storage Temperature Range -65 to 150 °C
Top OperatingJunctionTemperature
Range for L7800 -55 to 150 °C
for L7800C 0 to 150
Symbol Parameter D2PAK TO-220 TO-220FP TO-3 Unit
Rthj-case Thermal Resistance Junction-case Max 3554°C/W
R
thj-amb Thermal Resistance Junction-ambient Max 62.5 50 60 35 °C/W
L7800 SERIES
3/29
CONNECTION DIAGRAM (top view)
ORDERING CODES
(*) Available in Tape & Reel with the suffix "-TR".
TYPE TO-220 D2PAK (*) TO-220FP TO-3 OUTPUT
VOLTAGE
L7805 L7805T 5 V
L7805C L7805CV L7805CD2T L7805CP L7805CT 5 V
L7852C L7852CV L7852CD2T L7852CP L7852CT 5.2 V
L7806 L7806T 6 V
L7806C L7806CV L7806CD2T L7806CP L7806CT 6 V
L7808 L7808T 8 V
L7808C L7808CV L7808CD2T L7808CP L7808CT 8 V
L7885C L7885CV L7885CD2T L7885CP L7885CT 8.5 V
L7809C L7809CV L7809CD2T L7809CP L7809CT 9 V
L7812 L7812T 12 V
L7812C L7812CV L7812CD2T L7812CP L7812CT 12 V
L7815 L7815T 15 V
L7815C L7815CV L7815CD2T L7815CP L7815CT 15 V
L7818 L7818T 18 V
L7818C L7818CV L7818CD2T L7818CP L7818CT 18 V
L7820 L7820T 20 V
L7820C L7820CV L7820CD2T L7820CP L7820CT 20 V
L7824 L7824T 24 V
L7824C L7824CV L7824CD2T L7824CP L7824CT 24 V
TO-220 TO-220FP
TO-3D2PAK
L7800 SERIES
4/29
APPLICATION CIRCUITS
TEST CIRCUITS
Figure 1 : DC Parameter
Figure 2 : Load Regulation
L7800 SERIES
5/29
Figure 3 : Ripple Rejection
ELECTRICAL CHARACTERISTICS OF L7805 (refer to the test circuits, TJ= -55 to 15C, VI= 10V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 4.8 5 5.2 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 8 to 20 V 4.65 5 5.35 V
VO(*) Line Regulation VI=7to25V T
J= 25°C 3 50 mV
VI=8to12V T
J= 25°C 1 25
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 100 mV
IO= 250 to 750 mA TJ= 25°C 25
IdQuiescent Current TJ= 25°C 6 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 8 to 25 V 0.8
VO/T Output Voltage Drift IO= 5 mA 0.6 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 40 µV/VO
SVR Supply Voltage Rejection VI= 8 to 18 V f = 120Hz 68 dB
VdDropout Voltage IO=1A T
J= 25°C 2 2.5 V
ROOutput Resistance f = 1 KHz 17 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.75 1.2 A
Iscp Short Circuit Peak Current TJ= 25°C 1.3 2.2 3.3 A
L7800 SERIES
6/29
ELECTRICAL CHARACTERISTICS OF L7806 (refer to the test circuits, TJ= -55 to 150°C, VI= 11V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7808 (refer to the test circuits, TJ= -55 to 150°C, VI= 14V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 5.75 6 6.25 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 9 to 21 V 5.65 6 6.35 V
VO(*) Line Regulation VI=8to25V T
J= 25°C 60 mV
VI=9to13V T
J= 25°C 30
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 100 mV
IO= 250 to 750 mA TJ= 25°C 30
IdQuiescent Current TJ= 25°C 6 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 9 to 25 V 0.8
VO/T Output Voltage Drift IO= 5 mA 0.7 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 40 µV/VO
SVR Supply Voltage Rejection VI= 9 to 19 V f = 120Hz 65 dB
VdDropout Voltage IO=1A T
J= 25°C 2 2.5 V
ROOutput Resistance f = 1 KHz 19 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.75 1.2 A
Iscp Short Circuit Peak Current TJ= 25°C 1.3 2.2 3.3 A
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 7.7 8 8.3 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 11.5 to 23 V 7.6 8 8.4 V
VO(*) Line Regulation VI= 10.5 to 25 V TJ= 25°C 80 mV
VI=11to17V T
J= 25°C 40
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 100 mV
IO= 250 to 750 mA TJ= 25°C 40
IdQuiescent Current TJ= 25°C 6 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 11.5 to 25 V 0.8
VO/T Output Voltage Drift IO= 5 mA 1 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 40 µV/VO
SVR Supply Voltage Rejection VI= 11.5 to 21.5 V f = 120Hz 62 dB
VdDropout Voltage IO=1A T
J= 25°C 2 2.5 V
ROOutput Resistance f = 1 KHz 16 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.75 1.2 A
Iscp Short Circuit Peak Current TJ= 25°C 1.3 2.2 3.3 A
L7800 SERIES
7/29
ELECTRICAL CHARACTERISTICS OF L7812 (refer to the test circuits, TJ= -55 to 150°C, VI= 19V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7815 (refer to the test circuits, TJ= -55 to 150°C, VI= 23V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 11.5 12 12.5 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 15.5 to 27 V 11.4 12 12.6 V
VO(*) Line Regulation VI= 14.5 to 30 V TJ= 25°C 120 mV
VI=16to22V T
J= 25°C 60
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 100 mV
IO= 250 to 750 mA TJ= 25°C 60
IdQuiescent Current TJ= 25°C 6 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I=15to30V 0.8
V
O
/T Output Voltage Drift IO= 5 mA 1.5 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 40 µV/VO
SVR Supply Voltage Rejection VI= 15 to 25 V f = 120Hz 61 dB
VdDropout Voltage IO=1A T
J= 25°C 2 2.5 V
ROOutput Resistance f = 1 KHz 18 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.75 1.2 A
Iscp Short Circuit Peak Current TJ= 25°C 1.3 2.2 3.3 A
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 14.4 15 15.6 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 18.5 to 30 V 14.25 15 15.75 V
VO(*) Line Regulation VI= 17.5 to 30 V TJ= 25°C 150 mV
VI=20to26V T
J= 25°C 75
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 150 mV
IO= 250 to 750 mA TJ= 25°C 75
IdQuiescent Current TJ= 25°C 6 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 18.5 to 30 V 0.8
VO/T Output Voltage Drift IO= 5 mA 1.8 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 40 µV/VO
SVR Supply Voltage Rejection VI= 18.5 to 28.5 V f = 120Hz 60 dB
VdDropout Voltage IO=1A T
J= 25°C 2 2.5 V
ROOutput Resistance f = 1 KHz 19 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.75 1.2 A
Iscp Short Circuit Peak Current TJ= 25°C 1.3 2.2 3.3 A
L7800 SERIES
8/29
ELECTRICAL CHARACTERISTICS OF L7818 (refer to the test circuits, TJ= -55 to 150°C, VI= 26V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7820 (refer to the test circuits, TJ= -55 to 150°C, VI= 28V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 17.3 18 18.7 V
VOOutput Voltage IO=5mAto1A P
O15W
VI=22to33V 17.1 18 18.9 V
VO(*) Line Regulation VI=21to33V T
J= 25°C 180 mV
VI=24to30V T
J= 25°C 90
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 180 mV
IO= 250 to 750 mA TJ= 25°C 90
IdQuiescent Current TJ= 25°C 6 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I=22to33V 0.8
V
O
/T Output Voltage Drift IO= 5 mA 2.3 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 40 µV/VO
SVR Supply Voltage Rejection VI= 22 to 32 V f = 120Hz 59 dB
VdDropout Voltage IO=1A T
J= 25°C 2 2.5 V
ROOutput Resistance f = 1 KHz 22 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.75 1.2 A
Iscp Short Circuit Peak Current TJ= 25°C 1.3 2.2 3.3 A
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 19.2 20 20.8 V
VOOutput Voltage IO=5mAto1A P
O15W
VI=24to35V 19 20 21 V
VO(*) Line Regulation VI= 22.5 to 35 V TJ= 25°C 200 mV
VI=26to32V T
J= 25°C 100
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 200 mV
IO= 250 to 750 mA TJ= 25°C 100
IdQuiescent Current TJ= 25°C 6 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I=24to35V 0.8
V
O
/T Output Voltage Drift IO= 5 mA 2.5 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 40 µV/VO
SVR Supply Voltage Rejection VI= 24 to 35 V f = 120Hz 58 dB
VdDropout Voltage IO=1A T
J= 25°C 2 2.5 V
ROOutput Resistance f = 1 KHz 24 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.75 1.2 A
Iscp Short Circuit Peak Current TJ= 25°C 1.3 2.2 3.3 A
L7800 SERIES
9/29
ELECTRICAL CHARACTERISTICS OF L7824 (refer to the test circuits, TJ= -55 to 150°C, VI= 33V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7805C (refer to the test circuits, TJ= -55 to 150°C, VI= 10V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ=25°C 232425 V
V
O
Output Voltage IO=5mAto1A P
O15W
VI=28to38V 22.8 24 25.2 V
VO(*) Line Regulation VI=27to38V T
J= 25°C 240 mV
VI=30to36V T
J= 25°C 120
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 240 mV
IO= 250 to 750 mA TJ= 25°C 120
IdQuiescent Current TJ= 25°C 6 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I=28to38V 0.8
V
O
/T Output Voltage Drift IO= 5 mA 3 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 40 µV/VO
SVR Supply Voltage Rejection VI= 28 to 38 V f = 120Hz 56 dB
VdDropout Voltage IO=1A T
J= 25°C 2 2.5 V
ROOutput Resistance f = 1 KHz 28 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.75 1.2 A
Iscp Short Circuit Peak Current TJ= 25°C 1.3 2.2 3.3 A
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 4.8 5 5.2 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 7 to 20 V 4.75 5 5.25 V
VO(*) Line Regulation VI=7to25V T
J= 25°C 3 100 mV
VI=8to12V T
J= 25°C 1 50
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 100 mV
IO= 250 to 750 mA TJ= 25°C 50
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 7 to 25 V 0.8
VO/T Output Voltage Drift IO= 5 mA -1.1 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 40 µV/VO
SVR Supply Voltage Rejection VI= 8 to 18 V f = 120Hz 62 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 17 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.75 A
Iscp Short Circuit Peak Current TJ= 25°C 2.2 A
L7800 SERIES
10/29
ELECTRICAL CHARACTERISTICS OF L7852C (refer to the test circuits, TJ= -55 to 150°C, VI= 10V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7806C (refer to the test circuits, TJ= -55 to 150°C, VI= 11V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 5.0 5.2 5.4 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 8 to 20 V 4.95 5.2 5.45 V
VO(*) Line Regulation VI=7to25V T
J= 25°C 3 105 mV
VI=8to12V T
J= 25°C 1 52
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 105 mV
IO= 250 to 750 mA TJ= 25°C 52
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 7 to 25 V 1.3
VO/T Output Voltage Drift IO= 5 mA -1 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 42 µV/VO
SVR Supply Voltage Rejection VI= 8 to 18 V f = 120Hz 61 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 17 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.75 A
Iscp Short Circuit Peak Current TJ= 25°C 2.2 A
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 5.75 6 6.25 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 8 to 21 V 5.7 6 6.3 V
VO(*) Line Regulation VI=8to25V T
J= 25°C 120 mV
VI=9to13V T
J= 25°C 60
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 120 mV
IO= 250 to 750 mA TJ= 25°C 60
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 8 to 25 V 1.3
VO/T Output Voltage Drift IO= 5 mA -0.8 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 45 µV/VO
SVR Supply Voltage Rejection VI= 9 to 19 V f = 120Hz 59 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 19 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.55 A
Iscp Short Circuit Peak Current TJ= 25°C 2.2 A
L7800 SERIES
11/29
ELECTRICAL CHARACTERISTICS OF L7808C (refer to the test circuits, TJ= -55 to 150°C, VI= 14V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7885C (refer to the test circuits, TJ= -55 to 150°C, VI= 14.5V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 7.7 8 8.3 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 10.5 to 25 V 7.6 8 8.4 V
VO(*) Line Regulation VI= 10.5 to 25 V TJ= 25°C 160 mV
VI=11to17V T
J= 25°C 80
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 160 mV
IO= 250 to 750 mA TJ= 25°C 80
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 10.5 to 25 V 1
VO/T Output Voltage Drift IO= 5 mA -0.8 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 52 µV/VO
SVR Supply Voltage Rejection VI= 11.5 to 21.5 V f = 120Hz 56 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 16 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.45 A
Iscp Short Circuit Peak Current TJ= 25°C 2.2 A
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 8.2 8.5 8.8 V
VOOutput Voltage IO=5mAto1A P
O15W
VI=11to26V 8.1 8.5 8.9 V
VO(*) Line Regulation VI=11to27V T
J= 25°C 160 mV
VI= 11.5 to 17.5 V TJ= 25°C 80
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 160 mV
IO= 250 to 750 mA TJ= 25°C 80
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I=11to27V 1
V
O
/T Output Voltage Drift IO= 5 mA -0.8 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 55 µV/VO
SVR Supply Voltage Rejection VI= 12 to 22 V f = 120Hz 56 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 16 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.45 A
Iscp Short Circuit Peak Current TJ= 25°C 2.2 A
L7800 SERIES
12/29
ELECTRICAL CHARACTERISTICS OF L7809C (refer to the test circuits, TJ= -55 to 150°C, VI= 15V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7812C (refer to the test circuits, TJ= -55 to 150°C, VI= 19V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 8.65 9 9.35 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 11.5 to 26 V 8.55 9 9.45 V
VO(*) Line Regulation VI= 11.5 to 26 V TJ= 25°C 180 mV
VI=12to18V T
J= 25°C 90
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 180 mV
IO= 250 to 750 mA TJ= 25°C 90
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 11.5 to 26 V 1
VO/T Output Voltage Drift IO= 5 mA -1 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 70 µV/VO
SVR Supply Voltage Rejection VI= 12 to 23 V f = 120Hz 55 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 17 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.40 A
Iscp Short Circuit Peak Current TJ= 25°C 2.2 A
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 11.5 12 12.5 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 14.5 to 27 V 11.4 12 12.6 V
VO(*) Line Regulation VI= 14.5 to 30 V TJ= 25°C 240 mV
VI=16to22V T
J= 25°C 120
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 240 mV
IO= 250 to 750 mA TJ= 25°C 120
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 14.5 to 30 V 1
VO/T Output Voltage Drift IO= 5 mA -1 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 75 µV/VO
SVR Supply Voltage Rejection VI= 15 to 25 V f = 120Hz 55 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 18 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.35 A
Iscp Short Circuit Peak Current TJ= 25°C 2.2 A
L7800 SERIES
13/29
ELECTRICAL CHARACTERISTICS OF L7815C (refer to the test circuits, TJ= -55 to 150°C, VI= 23V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7818C (refer to the test circuits, TJ= -55 to 150°C, VI= 26V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 14.5 15 15.6 V
VOOutput Voltage IO=5mAto1A P
O15W
VI= 17.5 to 30 V 14.25 15 15.75 V
VO(*) Line Regulation VI= 17.5 to 30 V TJ= 25°C 300 mV
VI=20to26V T
J= 25°C 150
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 300 mV
IO= 250 to 750 mA TJ= 25°C 150
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I= 17.5 to 30 V 1
VO/T Output Voltage Drift IO= 5 mA -1 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 90 µV/VO
SVR Supply Voltage Rejection VI= 18.5 to 28.5 V f = 120Hz 54 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 19 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.23 A
Iscp Short Circuit Peak Current TJ= 25°C 2.2 A
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 17.3 18 18.7 V
VOOutput Voltage IO=5mAto1A P
O15W
VI=21to33V 17.1 18 18.9 V
VO(*) Line Regulation VI=21to33V T
J= 25°C 360 mV
VI=24to30V T
J= 25°C 180
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 360 mV
IO= 250 to 750 mA TJ= 25°C 180
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I=21to33V 1
V
O
/T Output Voltage Drift IO= 5 mA -1 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 110 µV/VO
SVR Supply Voltage Rejection VI= 22 to 32 V f = 120Hz 53 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 22 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.20 A
Iscp Short Circuit Peak Current TJ= 25°C 2.1 A
L7800 SERIES
14/29
ELECTRICAL CHARACTERISTICS OF L7820C (refer to the test circuits, TJ= -55 to 150°C, VI= 28V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7824C (refer to the test circuits, TJ= -55 to 150°C, VI= 33V,
IO=500mA,C
I=0.33µF,C
O= 0.1 µF unless otherwise specified).
(*) Load and line regulation are specified at constant junction temperature. Changes in VOdue to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ= 25°C 19.2 20 20.8 V
VOOutput Voltage IO=5mAto1A P
O15W
VI=23to35V 19 20 21 V
VO(*) Line Regulation VI= 22.5 to 35 V TJ= 25°C 400 mV
VI=26to32V T
J= 25°C 200
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 400 mV
IO= 250 to 750 mA TJ= 25°C 200
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I=23to35V 1
V
O
/T Output Voltage Drift IO= 5 mA -1 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 150 µV/VO
SVR Supply Voltage Rejection VI= 24 to 35 V f = 120Hz 52 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 24 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.18 A
Iscp Short Circuit Peak Current TJ= 25°C 2.1 A
Symbol Parameter Test Conditions Min. Typ. Max. Unit
VOOutput Voltage TJ=25°C 232425 V
V
O
Output Voltage IO=5mAto1A P
O15W
VI=27to38V 22.8 24 25.2 V
VO(*) Line Regulation VI=27to38V T
J= 25°C 480 mV
VI=30to36V T
J= 25°C 240
VO(*) Load Regulation IO=5mAto1.5A T
J= 25°C 480 mV
IO= 250 to 750 mA TJ= 25°C 240
IdQuiescent Current TJ= 25°C 8 mA
IdQuiescent Current Change IO=5mAto1A 0.5 mA
V
I=27to38V 1
V
O
/T Output Voltage Drift IO= 5 mA -1.5 mV/°C
eN Output Noise Voltage B =10Hz to 100KHz TJ= 25°C 170 µV/VO
SVR Supply Voltage Rejection VI= 28 to 38 V f = 120Hz 50 dB
VdDropout Voltage IO=1A T
J= 25°C 2 V
ROOutput Resistance f = 1 KHz 28 m
Isc Short Circuit Current VI=35V T
J= 25°C 0.15 A
Iscp Short Circuit Peak Current TJ= 25°C 2.1 A
L7800 SERIES
15/29
Figure 4 : Dropout Voltage vs Junction
Temperature
Figure 5 : Peak Output Current vs Input/output
Differential Voltage
Figure 6 : Supply Voltage Rejection vs
Frequency
Figure 7 : Output Voltage vs Junction
Temperature
Figure 8 : Output Impedance vs Frequency
Figure 9 : Quiescent Current vs Junction
Temperature
L7800 SERIES
16/29
Figure 10 : Load Transient Response
Figure 11 : Line Transient Response
Figure 12 : Quiescent Current vs Input Voltage
Figure 13 : Fixed Output Regulator
NOTE:
1. To specify an output voltage, substitute voltage value for "XX".
2. Although no output capacitor is need for stability, it does improve transient response.
3. Required if regulator is locate an appreciable distance from power supply filter.
L7800 SERIES
17/29
Figure 14 : Current Regulator
Figure 15 : Circuit for Increasing Output Voltage
Figure 16 : Adjustable Output Regulator (7 to 30V)
Vxx
IO= +I
d
R
1
I
R1 5Id
R
2
V
O=V
XX (1+  )+I
dR
2
R
1
L7800 SERIES
18/29
Figure 17 : 0.5 to 10V Regulator
Figure 18 : High Current Voltage Regulator
Figure 19 : High Output Current with Short Circuit Protection
R4
VO=V
xx 
R1
VBEQ1
R1=
IQ1
IREQ -
βQ1 VBEQ1
IO=I
REG +Q
1(IREG )
R1
VBEQ2
VO=
ISC
L7800 SERIES
19/29
Figure 20 : Tracking Voltage Regulator
Figure 21 : Split Power Supply 15V - 1 A)
* Against potential latch-up problems.
Figure 22 : Negative Output Voltage Circuit
L7800 SERIES
20/29
Figure 23 : Switching Regulator
Figure 24 : High Input Voltage Circuit
Figure 25 : High Input Voltage Circuit
Figure 26 : High Output Voltage Regulator
VIN =V
I-(VZ+V
BE)
L7800 SERIES
21/29
Figure 27 : High Input and Output Voltage
Figure 28 : Reducing Power Dissipation with Dropping Resistor
Figure 29 : Remote Shutdown
VO=V
XX + VZ1
VI(min) - VXX - VDROP(max)
R=
IO(max) + Id(max)
L7800 SERIES
22/29
Figure 30 : Power AM Modulator (unity voltage gain, IO0.5)
NOTE: The circuit performs well up to 100 KHz.
Figure 31 : Adjustable Output Voltage with Temperature Compensation
NOTE:Q2is connected as a diode in order to compensate the variation of the Q1VBE withthetemperature.CallowsaslowrisetimeoftheVO
.
Figure 32 : Light Controllers (VOmin =V
XX +V
BE)
R2
VO=V
XX (1+ ) +V
BE
R1
VOrises when the light goes up
VOfalls when the light goes up
L7800 SERIES
23/29
Figure 33 : Protection against Input Short-Circuit with High Capacitance Loads
Application with high capacitance loads andanoutput voltage greater than 6 volts need anexternal diode (see fig. 33) to protect the device
against input short circuit. Inthis case the input voltage falls rapidly while the output voltage decrease slowly. The capacitance discharges by
means of the Base-Emitter junction of the series pass transistor in the regulator. If the energy is sufficiently high, the transistor may be de-
stroyed. The external diode by-passes the current from the IC to ground.
L7800 SERIES
24/29
DIM. mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 11.85 0.466
B 0.96 1.05 1.10 0.037 0.041 0.043
C 1.70 0.066
D 8.7 0.342
E 20.0 0.787
G 10.9 0.429
N 16.9 0.665
P 26.2 1.031
R 3.88 4.09 0.152 0.161
U 39.5 1.555
V 30.10 1.185
TO-3 MECHANICAL DATA
P003C/C
E
B
R
C
D
A
P
G
N
V
U
O
L7800 SERIES
25/29
DIM. mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
C 1.23 1.32 0.048 0.051
D 2.40 2.72 0.094 0.107
D1 1.27 0.050
E 0.49 0.70 0.019 0.027
F 0.61 0.88 0.024 0.034
F1 1.14 1.70 0.044 0.067
F2 1.14 1.70 0.044 0.067
G 4.95 5.15 0.194 0.203
G1 2.4 2.7 0.094 0.106
H2 10.0 10.40 0.393 0.409
L2 16.4 0.645
L4 13.0 14.0 0.511 0.551
L5 2.65 2.95 0.104 0.116
L6 15.25 15.75 0.600 0.620
L7 6.2 6.6 0.244 0.260
L9 3.5 3.93 0.137 0.154
DIA. 3.75 3.85 0.147 0.151
TO-220 MECHANICAL DATA
P011C
L7800 SERIES
26/29
DIM. mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
B 2.5 2.7 0.098 0.106
D 2.5 2.75 0.098 0.108
E 0.45 0.70 0.017 0.027
F 0.75 1 0.030 0.039
F1 1.15 1.50 0.045 0.059
F2 1.15 1.50 0.045 0.059
G 4.95 5.2 0.194 0.204
G1 2.4 2.7 0.094 0.106
H 10.0 10.40 0.393 0.409
L2 16 0.630
L3 28.6 30.6 1.126 1.204
L4 9.8 10.6 0.385 0.417
L6 15.9 16.4 0.626 0.645
L7 9 9.3 0.354 0.366
DIA. 3 3.2 0.118 0.126
TO-220FP MECHANICAL DATA
L2
A
B
D
E
H
G
L6
¯
F
L3
G1
123
F2
F1
L7
L4
7012510/F
L7800 SERIES
27/29
DIM. mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 4.4 4.6 0.173 0.181
A1 2.49 2.69 0.098 0.106
A2 0.03 0.23 0.001 0.009
B 0.7 0.93 0.027 0.036
B2 1.14 1.7 0.044 0.067
C 0.45 0.6 0.017 0.023
C2 1.23 1.36 0.048 0.053
D 8.95 9.35 0.352 0.368
D1 8 0.315
E 10 10.4 0.393 0.409
E1 8.5 0.335
G 4.88 5.28 0.192 0.208
L 15 15.85 0.590 0.624
L2 1.27 1.4 0.050 0.055
L3 1.4 1.75 0.055 0.068
M 2.4 3.2 0.094 0.126
R 0.4 0.016
V2
D2PAK MECHANICAL DATA
P011P6G
L7800 SERIES
28/29
DIM. mm. inch
MIN. TYP MAX. MIN. TYP. MAX.
A 180 7.086
C 12.8 13.0 13.2 0.504 0.512 0.519
D 20.2 0.795
N 60 2.362
T 14.4 0.567
Ao 10.50 10.6 10.70 0.413 0.417 0.421
Bo 15.70 15.80 15.90 0.618 0.622 0.626
Ko 4.80 4.90 5.00 0.189 0.193 0.197
Po 3.9 4.0 4.1 0.153 0.157 0.161
P 11.9 12.0 12.1 0.468 0.472 0.476
Tape & Reel D2PAK-P2PAK-D2PAK/A-P2PAK/A MECHANICAL DATA
L7800 SERIES
29/29
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
conseq uences of u se of such inform ation nor for any in fring ement of p atents or o ther ri ghts of th ird p arties which may r esul t f rom
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
© The ST logo is a registered trademark of STMicroelectronics
© 2003 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Mo roc co
Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.
© http://www.st.com