PAA110 Dual Single-Pole, Normally Open OptoMOS(R) Relays INTEGRATED CIRCUITS DIVISION Parameters Load Voltage Load Current On-Resistance (max) Ratings 400 150 22 Units VP mArms / mADC Features * 3750Vrms Input/Output Isolation * Low Drive Power Requirements (TTL/CMOS Compatible) * High Reliability * Arc-Free With No Snubbing Circuits * VDE Compatible * FCC Compatible * No EMI/RFI Generation * Small 8-Pin Package * Machine Insertable, Wave Solderable * Surface Mount and Tape Reel Version Available. Description PAA110 is a 400V, 150mA, 22 dual normally open (1-Form-A) optically isolated Solid State Relay. Its efficient MOSFET switches and photovoltaic die use IXYS Integrated Circuits Division's patented OptoMOS architecture to provide 3750Vrms of input to output isolation. The optically coupled output is controlled by a highly efficient GaAIAs infrared LED This performance leader provides high peak load voltage handling capability and improved peak load current handling. Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Applications Ordering Information * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment-Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part # PAA110 PAA110P PAA110PTR PAA110S PAA110STR Description 8-Pin DIP (50/Tube) 8-Pin Flatpack (50/Tube) 8-Pin Flatpack (1000/Reel) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1000/Reel) Pin Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 AC/DC Configuration 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb DS-PAA110-R05 toff e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION PAA110 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 400 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Conditions Symbol Min Typ Max Units t=10ms IL=150mA VL=400VP IL ILPK RON ILEAK - 15 - 150 400 22 1 mArms / mADC mAP A VL=50V, f=1MHz ton toff COUT - 25 1 0.25 - IL=150mA IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF Electrical Characteristics @ 25C Parameter Output Characteristics Load Current * Continuous, AC/DC Configuration Peak On-Resistance, AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance IF=5mA, VL=10V ms pF *NOTE: If both poles operate simultaneously, then load current must be derated in order not to exceed the package power dissipation value. 2 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION PAA110 PERFORMANCE DATA @25C (Unless Otherwise Noted)* 25 25 20 15 10 5 20 15 10 5 1.17 25 1.19 1.21 1.23 1.25 0.15 0.21 0.27 0.33 0.39 Typical IF for Switch Operation (N=50, IL=150mADC) Typical IF for Switch Dropout (N=50) Device Count (N) 5 5 0.05 25 10 10 0.07 0.09 0.11 0.13 0.15 Turn-Off Time (ms) Turn-On Time (ms) 15 15 0.45 LED Forward Voltage Drop (V) 20 20 0 0 0 Device Count (N) 25 Device Count (N) Device Count (N) Device Count (N) 30 Typical Turn-Off Time (N=50, IF=5mA, IL=150mADC) Typical Turn-On Time (N=50, IF=5mA, IL=150mADC) Typical On-Resistance Distribution (N=50, IF=5mA, IL=150mADC) 35 30 20 Device Count (N) 35 Typical LED Forward Voltage Drop (N=50, IF=5mA) 15 10 5 25 20 15 10 5 0 0 0.75 1.05 1.35 1.65 1.95 0 0.75 2.25 1.05 1.35 1.65 1.95 2.25 13.1 13.7 LED Current (mA) LED Current (mA) 14.3 14.9 15.5 16.1 On-Resistance (:) Typical Blocking Voltage Distribution (N=50) 35 Device Count (N) 30 25 20 15 10 5 0 441.5 450.5 459.5 468.5 477.5 486.5 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=150mADC) 0.40 1.8 1.4 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 Turn-Off Time (ms) 1.6 0.30 0.25 0.20 0.15 0.10 -40 -20 0 20 40 60 Temperature (C) 80 100 120 0.10 0.08 0.06 0.04 0.02 0.05 0 0 0.8 Typical Turn-Off Time vs. LED Forward Current (IL=150mADC) 0.12 0.35 Turn-On Time (ms) LED Forward Voltage Drop(V) Typical LED Forward Voltage Drop vs. Temperature 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION PAA110 PERFORMANCE DATA @25C (Unless Otherwise Noted)* Typical Turn-On Time vs. Temperature (IL=150mADC) 0.14 IF=5mA IF=10mA IF=20mA 0.75 0.50 0.10 0.08 0.06 0.04 0.02 -40 3.0 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 Temperature (C) Typical IF for Switch Operation vs. Temperature (IL=150mADC) Typical IF for Switch Dropout vs. Temperature (IL=150mADC) 3.0 1.0 1.5 1.0 0.5 0 0 -40 -20 0 20 40 60 80 100 5 150 2.0 0.5 10 -40 Load Current (mA) LED Current (mA) 1.5 15 100 2.5 2.0 20 -40 -20 0 20 40 60 80 -150 -2.5 -2.0 -1.5 -1.0 -0.5 100 20 40 60 80 100 Leakage (PA) Blocking Voltage (VP) 0.030 0 470 465 460 455 -40 Temperature (C) 0.025 0.020 0.015 0.010 0.005 450 120 0.5 1.0 1.5 2.0 2.5 Typical Leakage vs. Temperature Measured across Pins 5&6 or 7&8 475 0 0 Load Voltage (V) 250 50 100 0 0.035 IF=20mA IF=10mA IF=5mA 80 -50 480 100 60 50 Typical Blocking Voltage vs. Temperature Maximum Load Current vs. Temperature 150 40 100 Temperature (C) 200 20 Typical Load Current vs. Load Voltage (IF=5mA) 300 -20 0 -100 Temperature (C) -40 -20 Temperature (C) Temperature (C) 2.5 Typical On-Resistance vs. Temperature (IF=5mA, IL=150mADC) 0 0 0 LED Current (mA) On-Resistance (:) 1.00 0.25 Load Current (mA) 25 0.12 1.25 Turn-Off Time (ms) Turn-On Time (ms) 1.50 Typical Turn-Off Time vs. Temperature (IL=150mADC) -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 Temperature (C) Temperature (C) Energy Rating Curve 1.2 Load Current (A) 1.0 0.8 0.6 0.4 0.2 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION PAA110 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating PAA110 / PAA110S / PAA110P MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time PAA110 / PAA110S 250C for 30 seconds PAA110P 260C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R05 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION PAA110 Mechanical Dimensions PAA110 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) Pin 1 PCB Hole Pattern 7.620 0.254 (0.300 0.010) 6.350 0.127 (0.250 0.005) 3.302 0.051 (0.130 0.002) 0.457 0.076 (0.018 0.003) 7.620 0.127 (0.300 0.005) 7.239 TYP. (0.285) 4.064 TYP (0.160) 7.620 0.127 (0.300 0.005) 0.254 0.0127 (0.010 0.0005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) PAA110S 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) Pin 1 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.102 (0.032 0.004) PAA110P 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0 MIN / 0.102 MAX (0 MIN / 0.004 MAX) 9.398 0.127 (0.370 0.005) Pin 1 9.652 0.381 (0.380 0.015) 7.620 0.254 (0.300 0.010) 2.286 MAX. (0.090 MAX.) 2.54 (0.10) 0.635 0.127 (0.025 0.005) 0.203 0.013 (0.008 0.0005) 8.70 (0.3425) 1.55 (0.0610) 0.65 (0.0255) 2.159 0.025 (0.085 0.001) 0.457 0.076 (0.018 0.003) 0.864 0.120 (0.034 0.004) 6 PCB Land Pattern Dimensions mm (inches) www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION PAA110 PAA110PTR Tape & Reel 2.00 (0.079) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Embossment W = 16.00 (0.63) 7.50 (0.295) Bo = 10.30 (0.406) K0 = 2.70 (0.106) K1 = 2.00 (0.079) Embossed Carrier 4.00 (0.157) Ao = 10.30 (0.406) P = 12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 PAA110STR Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) K0 =4.90 (0.193) K1 =4.20 (0.165) Embossed Carrier Embossment W=16.00 (0.63) Bo=10.30 (0.406) Ao=10.30 (0.406) P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-PAA110-R05 (c) Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: IXYS: PAA110L PAA110LS PAA110LSTR PAA110P PAA110PL PAA110PLTR PAA110S PAA110STR PAA110