DO NOT
SCALE FROM
THIS PRINT
ERM8-XXX-XX.X-X-DV-XXXX-TR
No OF POSITIONS
(PER ROW)
-005, -010, -011, -013, -020, -025, -030,
-035, -040, -049, -050, -060, -070, -075,-100
(-100 AVAILABLE ON -09.0 LEAD STYLE ONLY)
LEAD STYLE
-02.0 = 2mm
-05.0 = 5mm
-08.0 = 8mm
-09.0 = 9mm
PLATING SPECIFICATION
-L: LIGHT SELECTIVE GOLD / MATTE TIN
(USE T-1MXX-XX.X-L)
-S: SELECTIVE GOLD / MATTE TIN
(USE T-1MXX-XX.X-S)
-DV: DOUBLE VERTICAL
ROW SPECIFICATION
-K: POLYIMIDE FILM PAD
(FOR -EGP & EGPS OPTIONS
USE K-DOT-.157-.250-.005)
(FOR ALL OTHER OPTIONS USE K-500-300)
-DS: DIFFERENTIAL PAIR (HOT SWAP)
(AVAILABLE ONLY ON -05.0 LEAD STYLE)
(SEE TABLE 4 FOR POSITION AVAILABILITY)
-L : LATCHES
(AVAILABLE ONLY ON -05.0 LEAD STYLE)
(SEE TABLE FOR AVAILABILITY)
(NOT AVAILABLE WITH -EGP OPTION)
-EGP: EXTENDED GUIDE POSTS
(AVAILABLE ONLY ON -05.0 LEAD STYLE)
(NOT AVAILABLE WITH -L OPTION)
** -W: WELD TAB, USE WT-29-06-T, FOR USE
WITH ERM8-XXX-05.0-DV-L INSULATOR ONLY
(AVAILABLE ONLY ON -05.0 LEAD STYLE)
** -EGPS: EXTENDED GUIDE POST SHIELD
(AVAILABLE ONLY ON -05.0 LEAD STYLE)
(NOT AVAILABLE WITH -L OPTION)
(-10, -20, -25, & -30 POSITIONS ONLY)
TAPE & REEL
(STANDARD PACKAGING)
(SEE NOTES 4 & 7)
(** = NOT RELEASED FOR PRODUCTION)
OPTIONS
1.10 .043
(REF)
1.32 .052
(REF)
"A"
"A"
ERM8-XXX-XX.X-DV-01
(SEE TABLE 3)
(REF)
"B"
3.25
(REF)
.128
0.800 .0315
(TOL. NON-ACCUM)
(REF)
"A"
5.60 .220
(REF)
"C"
60
59
01
02
POSITION #1
INDICATOR
C
C
(REF)
"D"
1.50 .059
"N"
"C"
0.800
(TYP)
.0315
(TOL. NON-ACCUM)
3°
MAX
SWAY
'R'
C
L
C
L
C
C
DESIGNED AND DIMENSIONED
IN MILLIMETERS [INCHES]
3.200
-
0.060
+
0.050 .1260
-
.0024
+
.0020
"F"
(REF)
"E"
1.07
REF
.042
4.64
-
0.13
+
0.18 .183
-
.005
+
.007
0.65 .025
SECTION "A"-"A"
SCALE 4 : 1
T-1M37-XX.X-X
(SEE TABLE 3)
C
L
CC
C
C
SEE TABLE 1
(-02.0 SHOWN)
(-05.0 SHOWN)
(-09.0 SHOWN)
1.10 .043
(REF)
1.32 .052
(REF)
DETAIL 'R'
SCALE 4 : 1
(-08.0 SHOWN)
(**-05.0 WITH -EGPS
OPTION SHOWN)
C
FIG.1
(ERM8-030-02.0-X-DV-XX SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
S
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN
MILLIMETERS [INCHES].
TOLERANCES ARE:
DECIMALS ANGLES
X.X:
0.3 [.01] 2
X.XX:
0.13 [.005]
X.XXX:
0.050 [.0020]
MATERIAL:
0.8MM EDGE RATE TERMINAL ASSEMBLY
BY:
ERM8-XXX-XX.X-X-DV-XXXX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KNOWLDEN
9/27/2005
4
1
SHEET SCALE: 2:1
INSULATOR: LCP, COLOR: BLACK
TERMINAL: PHOS. BRZ.
LATCH: BeCu
SHIELD: PHOS BRONZE
c:\enterprisevault\DWG\MISC\MKTG\ERM8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: 0.038[.0015] MAX.
3. MINIMUM PUSHOUT FORCE: TERMINAL 2.22 N [.5 LB.], WELD TAB 4.45 N [1 LB.]
4. FOR QUANTITY UP TO 49 PIECES, NO LEADER, TRAILER, OR
EIA-481-D REEL WILL BE SUPPLIED. FOR QUANTITY OF 50-124
PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED.
5. "F" DIMENSION DOES NOT APPLY TO -EGP & -EGPS OPTION, SEE FIG. 5 & 6.
6. -EGP, -EGPS & -L OPTIONS NOT AVAILABLE TOGETHER.
7. -TR PACKAGING NOT AVAILABLE ON THE 100 POSITION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION S
"A"
4.00 .157
0.50[.020]
"H"
C
L
C
L
C
C
(FOR -EGP & EGPS OPTIONS USE K--DOT-.157-.250-.005)
(USE K-500-300 FOR ALL OTHER OPTIONS)
S
S
0.46 .018
"G"
"J"
(REF)
"L"
0.30 .012
(REF)
"K"
2.10 .082
2
MAX SWAY (TYP)
"N"
"N"
"P"
"P"
ERM8-XXX-05.0-DV-L
(SEE TABLE 3)
GROUND[LONG PIN]
SIGNAL[SHORT PIN]
SIGNAL[SHORT PIN]
C
C
C
L
C
WT-29-03-X
C
T-1M48-XX.X-X
GROUND[LONG PIN]
0.50[.020]
"M"
C
L
C
0.64 .025
(REF)
0.97 .038
(REF)
3.20 .126
(REF)
1.35
(REF)
.053
(SIGNAL PINS)
SECTION "N"-"N"
C
L
0.62
(REF)
.024
(GROUND PINS)
SECTION "P"-"P"
C
L
3°
MAX SWAY
T-1M37-XX.X-X IN PROCESS VIEW
0.11
±0.076
.004
±.003
FIG.2
-K OPTION
(ERM8-030-XX.X-X-DV-K SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
FIG. 3
-L & -DS OPTIONS
(AVAILABLE ON -05.0 LEADSTYLE ONLY)
(ERM8-025-05.0-X-DV-DS-L SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
FIG. 4
-K & -L OPTIONS
(ERM8-025-05.0-X-DV-K-L SHOWN)
(SAME AS FIG. 2, EXCEPT AS SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
S
S
SHEET OF
0.8MM EDGE RATE TERMINAL ASSEMBLY
BY:
ERM8-XXX-XX.X-X-DV-XXXX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KNOWLDEN
9/27/2005
4
2
SHEET SCALE: 2:1
REVISION S
c:\enterprisevault\DWG\MISC\MKTG\ERM8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
"L"
0.97 .038
(TYP)
2
MAX SWAY (TYP)
C
ERM8-XXX-05.0-DV-EGP
C
WT-29-06-T
10.805 .425
(REF)
"J" (REF)
FIG. 5
-EGP OPTIONS
(AVAILABLE ON -05.0 LEAD STYLE ONLY)
(ERM8-030-05.0-X-DV-EGP SHOWN)
(SAME AS FIG. 3, EXCEPT AS SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
C
SHEET OF
0.8MM EDGE RATE TERMINAL ASSEMBLY
BY:
ERM8-XXX-XX.X-X-DV-XXXX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KNOWLDEN
9/27/2005
4
3
SHEET SCALE: 2:1
REVISION S
c:\enterprisevault\DWG\MISC\MKTG\ERM8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
"P"
"B" "B"
C
L
"Q"
REF
9.87 .389
ERM8-XXX-05.0-DV-EGPS
SH29-XX-02-X
C
L
"L"
0.25 .010
(TYP) REF
2
MAX SWAY (TYP)
SECTION "B"-"B"
C
C
C
L
5.70
REF
.224
7.20
REF
.283
0.64 .025
REF
6.80 .268
0.97 .038
10.805 .4254
REF
C
C
L
FIG. 6
**-EGPS OPTIONS
(AVAILABLE ON -05.0 LEAD STYLE ONLY)
(ERM8-030-05.0-X-DV-EGPS SHOWN)
(SAME AS FIG. 5, EXCEPT AS SHOWN)
(** = NOT RELEASED FOR PRODUCTION)
SHEET OF
0.8MM EDGE RATE TERMINAL ASSEMBLY
BY:
ERM8-XXX-XX.X-X-DV-XXXX-TR
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KNOWLDEN
9/27/2005
4
4
SHEET SCALE: 3:1
REVISION S
c:\enterprisevault\DWG\MISC\MKTG\ERM8-XXX-XX.X-X-DV-XXXX-TR-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
