Industrial Switches and Sensors Global switches Heavy duty switches Compact switches Product solutions on the Interactive Catalogue Precision switches Hazardous location switches Safety switches Relays Position products Ultrasonic distance sensors Pressure sensors July 2003 Inside front cover WARNING ! PERSONAL INJURY DO NOT USE these products* as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. *Does not apply to 24CE/924CE Series (page 23), GSS Series (page 80), GK Series (pages 78, 83, 85) or CPS Series (page 89) Failure to comply with these instructions could result in death or serious injury. 2 WARNING ! MISUSE OF DOCUMENTATION * The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. www.honeywell.com/sensing CONTENTS Introduction - How to use this catalogue Page 2 EVN2000 Series Fast Install Limit Switches Page A recent addition to our range. Saves over 50 % in installation time with a design that eliminates the need to gain access to the inside of the housing in order to connect the switch. SZL-VL Series Limit Switches HDLS Series Heavy Duty Limit Switches Suitable for special applications in corrosive environments. Housed in a rugged die-cast zinc body and epoxy coated for protection, they are available with a range of switching and head options. Explosion Proof Switches Page Page Page A range of switches designed for use in hazardous applications in potentially explosive atmospheres. Most are UL-CSA listed and some meet the requirement of the new European Directive 94/9/EC (commonly referred to as the ATEX Directive). New, economic, compact, rugged, dependable limit switches. Levers for Limit Switches GL Series EN50041/47 Global Limit Switches Page A complete range of CENELEC approved products, suitable for most industrial applications. Safety Switches for machine guarding SL1 Series Page Space saving size for machine miniaturization, different contact and actuators available. Page Miniature, rugged, pre-wired switches, meeting the requirements of the Low Voltage directive. They come with a range of head styles and sealing options. 24/924CE Series Miniature Enclosed Switches Page Safety interlock switches, limit switches and cable-pull limit switches for industrial machine safety. Relays 14/914CE Series Miniature Enclosed Switches Page A range of levers for use with Honeywell's Limit Switches. Select the best one for your application. Page Designed for a wide range of applications including power as well as logic control for factory machines and control panels. Linear and Rotary Position Page A wide selection of Hall-effect, magnetoresistive, and potentiometric devices for detecting the presence of a magnetic field or linear and rotary position. Page Opto Sensors Page Ultrasonic Distance Sensors Page Miniature, rugged, direct opening action contacts. This switch is available with a variety of actuators and is pre-wired. LS Series Compact Limit Switches Page A range of compact limit switches designed for accurate repeatability under the most stringent conditions. Special oil resistant and high temperature versions are available. BF Series Medium Duty Limit Switches Pressure sensors Page Rugged plastic enclosure, with large internal cavity for ease of wiring. BZE/DTE Series Medium Duty Limit Switches Ultrasonic position sensors for presence/absence sensing, precision distance sensing or tracking for areas where other sensing technologies have difficulty, such as clear or shiny objects, foggy or particle laden air, or splashing liquids. Page Page We offer stainless steel and silicon pressure sensors depending on the application, as well as a variety of high purity pressure sensors. Honeywell Sensing and Control products Page Index Page Side or flange mount, momentary or maintained contact, sealed or unsealed actuators, removal of bottom enclosure for ease of wiring. BAF/DTF Series High Capacity Enclosed Switches Page Rugged cast aluminium housed switches, sealed for wash-down applications. Momentary or maintained contacts, right or left hand actuators, 3 hole mounting. www.honeywell.com/sensing 1 INTRODUCTION HONEYWELL INDUSTRIAL SWITCHES AND SENSORS Honeywell Industrial Switches and Sensors provide a wide selection of products and technologies for applications in most industrial applications. This catalogue contains our most popular listings. To view our complete range of products, visit our website at http://www.honeywell.com/sensing. Honeywell is a worldwide leader in advanced switching and sensing technology. Our reputation for technology, quality and reliability is second to none. We have more than 60 years of experience; and extensive knowledge of Industrial applications, an extensive customer service and support network. Honeywell manufactures the original MICROSWITCH brand switch and we offer one of the most complete lines of global electro-mechanical heavy duty limit switches. Sealed versions keep out moisture and other contaminates. Explosion proof types are designed for use in hazardous locations. Safety versions provide direct opening action contacts for machine guarding and emergency stops. We are a recognized technology leader in the development and manufacture of pressure and position-sensing transducers and controls. We use the latest in manufacturing technology to produce hundreds of thousands of transducers a year. Millions of units are currently performing in a multitude of continuous-duty applications around the world, where they typically outlast the systems they support. We have ISO 9001 certified facilities and Class 10 cleanroom capability, and we manufacture a full line of high purity pressure sensing and control products; each individually tested, inspected and certified to be in full compliance with the product specification. A comprehensive and diverse line of speed and position sensors for the Industrial market place is also available. With the combined capabilities of three wellknown product brands - Data Instruments, Clarostat, Electro and New England Instruments - Honeywell continuously strives to solve customers' application problems. Whether you need custom designed sensors for proprietary OEM applications or off-the-shelf sensor solutions, our extensive in-house design, manufacturing and environmental testing capabilities offer solutions and alternatives to meet your needs. 2 www.honeywell.com/sensing INTRODUCTION How to use this catalogue For each referenced listing, key specification parameters, descriptions and mounting drawing information are presented. These illustrate our capabilities while the specifications include allow easy differentiation between similar products. There are, of course, many more product options available. Full product specification may be accessed on our website (www.honeywell.com/sensing). At the Home page enter the catalogue listing reference in the SEARCH box and click GO! This will take you directly to the interactive catalogue/specification search tables for this listing. Alternatively select and click the interactive catalogue icon on the Home page and then choose a product category against which to do a specification search. Also on the website you can access installation instructions, application notes, Frequently Asked Questions (FAQs), selection guides and additional technical information. Mounting dimensions Mounting dimensions shown in each product section are for reference only. For exact information, request an engineering drawing from you nearest Honeywell sales office or visit our website and access it through the interactive catalogue. Where dual dimensions are shown on mounting drawings, the first or upper one is millimetres (mm) and the second or lower is inches (in). Where single dimensions are shown, they are millimetres (mm), unless otherwise stated. To order these products Simply contact your local Honeywell Sales Representative, your Honeywell Distributor or your local Honeywell office. If you need a product not listed in this catalogue One of Honeywell's strengths is in application-specific packaging of sensing technology. Honeywell provides many variations of our basic switches and sensors. For more information, either browse the full interactive catalogue available on our website, or telephone the following numbers: USA 1-800-537-6945/1-815-537-6945 UK +44 (0)1698 481 481 Germany France +33 1 60 19 80 40 Italy +49 69 8064 444 +39 02 92146 450/456 More information on Honeywell Sensing & Control products and how to contact us can be found on our website. Select the right product - select the right supplier Delivering excellence in system critical sensing solutions A system is critical if the quality, reliability, delivery and customer service associated with a component part is essential to the performance of the operation or end product. If a sensor or a switch is critical to the performance, cost effectiveness, delivery or safety of a product or operation then it's systems critical. It is therefore a defining element in the performance of the system under whatever conditions apply. Failure of the component - or failure of delivery of the component - results in lost productivity, increased costs or a catastrophic event such as a shutdown. Therefore selecting the right product is essential. It can make the difference between success and failure. Honeywell Sensing and Control - delivering excellence To select the right product, first select the right supplier. To deliver the right products for our customers' applications we listen to them to understand their needs. Using techniques such as "Voice of the Customer and "Concept Engineering" we make sure that the products and solutions we deliver are the right ones. As part of Honeywell we can use local knowledge and understanding combined with global expertise and resources to achieve this. We can deploy many key technologies to bring innovative solutions to customers' problems. Our products are manufactured to work well and to last. We use Six Sigma Plus productivity to ensure this is the case. We have award winning manufacturing facilities around the world and recognised world class business excellence in manufacturing and supply chain management to deliver on time, anywhere in the world. Our e-business approach offers instant access to product information, technical support and application knowledge through out Internet site. Check out our powerful new interactive catalogue that can search and find the right products for customers' needs and deliver a drawing ready for incorporation in a CAD system direct to your desk. And of course, we manage our whole business for the benefit of our customers, using an acknowledged world-class business excellence approach that incorporates Six Sigma principles. Expanded Product Lines As well as many new and innovative switches, this catalogue includes an expanded range of Pressure and Position Sensors, previously known under the Clarostat, NEI and Electrocorporation brand names. www.honeywell.com/sensing 3 Blank page 4 www.honeywell.com/sensing LIMIT SWITCHES Industrial Electromechanical Limit Switches Honeywell offers an advanced line of heavy duty limit switches and a wide selection of application-proven enclosed switches (precision snap-acting switches sealed in rugged metal housing). Sealed versions keep out moisture and other contaminants. Our products meet or exceed critical standards allowing for global use. Our rugged switches are suitable for use in harshduty, wash-down environments. We offer a variety of circuitry, terminations and actuators to ensure that can match your choice of switch to your application. Limit and enclosed switches are the cost effective switches of choice for detecting objects which can be touched. When an object comes in contact with an actuator, the switch operates. Rugged and dependable, these switches are offered in a variety of sizes, with different seals, enclosures, actuation, circuitries and electrical ratings. Enclosed switches are known for high precision and low cost. Limit Switches are especially rugged and well sealed. Explosion proof switches are designed for use in hazardous locations. The Honeywell switches featured here are all proven in a broad range of Industrial applications - machine tools, packaging machinery, lifting gear, presses and construction machinery. More information about our complete product range - and the depth of product available within each product line - can be found on our interactive catalogue at www.honeywell.com/sensing. MICRO SWITCH Brand products Honeywell has been at the forefront of switching technology since we were the first to develop the precision snap-action switch more than 60 years ago. Ever since we introduced the MICRO SWITCH Brand Products in 1937, we have been recognized as the performance standard that all other switches are measured against. We continue in that tradition by constantly improving the technology, cost-effectiveness, and delivery of these hardworking, versatile electromechanical switches. www.honeywell.com/sensing 5 LIMIT SWITCHES Proper application of limit switches The following are guidelines for the correct application of Limit Switches. Never use the Limit Switch as a physical end stop. Mechanical damage or incorrect operation may occur if this is done. Always ensure that the mechanical actuator is protected from excessive mechanical shock. Never release the actuator suddenly - gradual actuation and release will ensure that stress on the mechanics of the switch is kept to a minimum. This has the added benefit that the switch life will be improved. The diagrams illustrate how to actuate your limit switch for optimum performance. Standards and Electrical rating IEC/EN 60947-1 explains the general rules relating to Low Voltage switchgear and controlgear. The purpose of this standard is to harmonize as much as possible the product performance and test requirements for equipment where the rated voltage does not exceed 1,000 Vac or 1,500 Vdc. WRONG WRONG RIGHT FIXED STOP RIGHT For limit switches with pushrod actuators, the actuating force should be applied as nearly as possible in line with the pushrod axis. IEC 60947-5-1 is part 5 of the general rules which relates to Control-circuit devices and switching elements, where rated voltage does not exceed 1,000 Vac or 600 Vdc. There are special requirements for control switches with positive opening operation. These switches are marked on the outside with this symbol: WRONG WRONG over-riding cam RIGHT RIGHT over-riding The Contact Element form defines the configuration and number of contacts within the switch. Form Za - both contact elements have the same polarity cam Cam or dog arrangements should be such that the actuator is not suddently released to snap back freely. Form Zb - the two contact elements are electrically separated. free position interference The Utilization Category defines the type of current carried - ac or dc - and the typical application where the switch is used. WRONG The contact rating Designation relates to the Utilization Categories and defines the conventional thermal current Ith (a) rated operational current Ie (A) at rated operational voltages Ue and the VA rating. free position operated position end of overtravel Actuators RIGHT A range of actuators is available for limit switches. Illustrations of actuator types available from this catalogue are shown at the beginning of each product family. Other actuators may be available - for more information please contact your local Honeywell office. Roller lever end of overtravel WRONG Top roller lever Adjustable roller lever Top pin plunger RIGHT Operating mechanisms for limit switches shoud be so designed that, under any operating or emergency conditions, the limit switch is not operated beyond its overtravel limit position. A limit switch should not be used as a mechanical stop. Top pin plunger, boot seal WRONG Top roller plunger Top roller plunger, boot seal Top roller Top roller plunger, plunger, perpendicular perpendicular, boot seal non-over-riding Ball bearing plunger RIGHT over-riding Side pin plunger 6 Side roller plunger Roller lever Yoke lever Rod lever Wobble head For limit switches with lever actuators, the actuating force should be applied as nearly perpendicular to the lever as practical and perpendicular to the shaft axis about which the lever rotates. www.honeywell.com/sensing LIMIT SWITCHES A Note on Degrees of Protection IP Classification NEMA Classification (USA) The IEC 529 standard describes a system for classifying the degree of protection provided by the enclosures of electrical equipment. The level of protection given by the enclosure is indicated by the IP code. This code system uses the letters ``IP'' (International Protection) followed by up to four digits. Normally only the first two digits are used. IP 1st Digit 2nd Digit 3rd Digit 4th Digit The first digit is numerical and indicates the level of protection within the enclosure against the ingress of solid foreign objects and access to hazardous parts by persons. The second digit is also numerical and indicates the level of protection against the ingress of WATER into the enclosure. The third digit is a letter and indicates a higher level of protection for persons against access to hazardous parts. The fourth digit is also a letter and is used in exceptional cases for supplementary information. If the first or second digit is not required to be specified, then it is replaced by the letter ``X'' (``XX'' if both digits are not required). While the tables below serve as a guide to the level of protection, Honeywell recommends that customers refer to the full official IEC specification for the exact definitions. If in doubt about the degree of protection required for a particular application, please consult your local Honeywell office. Note: The IEC 529 standard does not relate to protection against rust, corrosion, icing or corrosive solvents (e.g. cutting fluids) and that product coded IP 67 may not necessarily meet IP 66 requirements. First Digit Protection against ingress of solid objects NEMA (National Electrical Manufacturer's Association) prepares standards which define a product, process or procedure with reference to one or more of the following: nomenclature, composition, construction, dimensions, tolerances, safety, operating characteristics, performance, quality, electrical rating, testing and the service for which designed. This standard provides degrees of protection for Enclosures for Electrical Equipment (1000 Volts Maximum) similar to that of the IEC 529 standard. The reference standard herein reflects the latest data in the NEMA Standards Publication when this information went to print. Please check for the latest information. Non-hazardous locations Type 1 enclosures are intended for indoor use primarily to provide a degree of protection against contact with the enclosed equipment. Type 3 enclosures are intended for outdoor use primarily to provide a degree of protection against windblown dust, rain, sleet, and external ice formation. Type 4 enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against windblown dust and rain, splashing water, and hose-directed water. Type 4X enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against corrosion, windblown dust and rain, splashing water, and hose-directed water. Type 6 enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against the entry of water during occasional temporary submersion at a limited depth. Type 6P enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against the entry of water during prolonged submersion at a limited depth. Type 12 enclosures are intended for indoor use primarily to provide a degree of protection against dust, falling dirt, and dripping noncorrosive liquids. IP TEST 0 no protection 1 protected against solid objects with a diameter greater than 50 mm 2 protected against solid objects with a diameter greater than 12 mm 3 protected against solid objects with a diameter greater than 2.5 mm 4 protected against solid objects with a diameter greater than 1 mm 5 protected against dust-limited ingress (no harmful deposit) 6 totally protected against dust Second Digit Protection against ingress of water IP TEST 0 no protection 1 protected against vertically falling drops of water 2 protected against vertically falling drops of water when the enclosure is tilted at an angle up to 15 degrees 3 protected against water sprayed at an angle of 60 degrees from the vertical 4 protected against splashing water from all directions - limited ingress (no harmful effects) Type 13 enclosures are intended for indoor use primarily to provide a degree of protection against dust, spraying water, oil and noncorrosive coolant. Note: Enclosures are based, in general, on the broad definitions outlined in NEMA Standards. Therefore, it will be necessary to ascertain that a particular enclosure will be adequate when exposed to the specific conditions that might exist in intended applications. Except as might otherwise be noted, all references to products relative to NEMA enclosure type are based on Honeywell evaluation and Underwriter's Laboratory (UL) tested. This NEMA Standards Publication does test for environmental conditions such as corrosion, rust, icing, oil, and coolants. The IEC 529 does not, and does not specify degree of protection against mechanical damage of equipment. For this reason, and because the tests and evaluations for other characteristics are not identical, the IEC Enclosure Classification Designations cannot be exactly equated with NEMA Enclosure Type Numbers. 5 protected against low pressure jets of water from all directions - limited ingress permitted 6 protected against powerful jets of water from all directions - limited ingress permitted 7 protected against the effects of temporary immersion in water 8 protected against the effects of continuous immersion in water www.honeywell.com/sensing 7 GLOBAL LIMIT SWITCHES EVN2000 Series EN 50047 Global Limit Switches The EVN2000 series limit switch is an innovative product which has been developed to address a need highlighted by Original Equipment Manufacturers (OEM), where "Ease of Wiring" is required. With the new design there is no need for access to the inside of the housing and therefore the housing cover, cover screws and gasket become obsolete. Furthermore, the integrated cable gland eliminates the need for additional conduit or cable gland hardware. All Normally Closed (NC) contacts are Direct Opening. Mechanical life: Sealing: Operating temperature: Approvals: Housing material: Termination: Switching options: 10 million IP 66/67, NEMA 1, 12, 13 -25 C to 85 C (-13 F to 185 F) IEC/EN 60947-5-1 EN 60529 EN81-1 AC15 A300 DC13 Q300 UL, CE Plastic Insulation Displacement Terminals (IDT) Single Pole, Double Throw, Snap action contacts (1NC/1NO) SPDT Zb Actuators Operating characteristics Actuator type Side rotary A Operating Free Pretravel Travel to Overtravel Differential Operating torque/force position positive opening travel point (OF) (FP) (PT) (PO) (OT) (DT) (OP) 0,120 N m (1.10 lb in) 0 25 45 45 12 25 Top pin plunger B 16,0 N (3.60 lb) 20,0 mm 2,0 mm (0.79 in) (0.08 in) 3,5 mm (0.14 in) 4,0 mm (0.16 in) 1,0 mm (0.04 in) 18,0 mm (0.71 in) Top roller plunger, parallel 16,0 N (3.60 lb) 30,0 mm 2,0 mm (1.18 in) (0.08 in) 3,5 mm (0.14 in) 4,0 mm (0.16 in) 1,0 mm (0.04 in) 28,0 mm (1.10 in) 16,0 N (3.60 lb) 30,0 mm 2,0 mm (1.18 in) (0.08 in) 3,5 mm (0.14 in) 4,0 mm (0.16 in) 1,0 mm (0.04 in) 28,0 mm (1.10 in) C Top roller plunger, perpendicular D OPTIONS Top pin plunger Top roller plunger, parallel Side rotary plastic roller REFERENCE EVN2000B Top roller plunger, perpendicular REFERENCE EVN2000A REFERENCE EVN2000C REFERENCE EVN2000D 8 www.honeywell.com/sensing GLOBAL LIMIT SWITCHES The new economical SZL-VL Series miniature type limit switches are specially designed for applications of small mounting space. These miniature switches are ideal for OEM machinery which requires a rugged and reliable limit switch that is capable of being mounted in space restricted applications. A wide range of actuators and optional neon lamp indicators add additional flexibility. A special pre-molded flexible cable gland allows for fast and simple wiring termination. VL Series General Purpose Compact Limit Switches Mechanical life: Sealing: Operating temperature: Approvals: Termination: Contacts: Electrical ratings: Ampere rating: Switching options: SPDT up to 10 million operations IP 64 -20 C to 60 C (-4 F to 140 F) UL, C-UL, CE Cable gland Gold plated silver 250 Vac 125 Vdc max. 5 A @ 250 Vac max./0.4 A @ 125 Vdc max. Single Pole, Double Throw, Double break (1NC/1NO) VL 3 4 NO NO 1 2 NC NC Actuators Side rotary actuated switches Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): 20 75 10 OPTIONS Roller lever, adjustable Roller lever 41.2.08 18 dia.x7 nylon roller 20 PT max R3 0 M4 arm fixing nut (Roller can be rotated and locked in any position through 360) +0.2 2-4.1 dia. -0 mounting holes +0.008 .161 dia. -0 mounting holes cover screw M3x6 36.20.8 Adjustable length of arm (30-70) 0max PT 2 1.425.031 10.2 .402 M4 arm fixing screw (with hexagonal holes) 12.5 .492 560.3 2.205.012 47.70.8 1.878.031 1.622.031 2-M5 (P=0.8) 18.5 tapped .728 7 .276 in depth mounting holes 20.40.3 .803.012 14 .551 15.1 .594 28 1.102 38.1 1.5 Operating torque max.: +0.2 2-4.1 0 dia. mounting holes 7.50.2 .295.008 25 .984 (Standard type) 5,88 N (1.32 lb) 10.2 .402 Arm fastening plate 12.5 .492 18.5 .728 Mounting metal M6 arm fastening plate screw with hexagonal holes 560.3 2.205.012 64 2.520 2-M3x23 cover screw 210.2 .827.008 (Roller can be rotated and locked in any position through 360) M4 arm fastening plate screw with hexagonal holes +0.008 .161 -0 dia. mounting holes 2-M5 (P=0.8) tapped mounting holes 42.70.8 1.681.031 33.50.8 1.319.031 28.50.8 1.122.031 18 dia.x7 nylon rooler M3x6 cover screw 2-M5 (P=0.8) tapped 7 .276 in depth mounting holes 64 2.520 2.0 .079 2-M3x23 cover screw 2-M5 (P=0.8) tapped mounting holes 14 .551 210.2 .827.008 28 1.102 Operating torque max.: REFERENCE SZL-VL-A 7.50.2 15.1 .295.008 .594 20.40.3 25 .803.012 .984 (Standard type) (46.4) (1.827) 3,35 N to 7,84 N (0.75 lb to 1.76 lb) REFERENCE SZL-VL-B www.honeywell.com/sensing 9 GLOBAL LIMIT SWITCHES VL Series Side rotary actuated switches (continued) Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): Operating force max. (OF): Adjustable rod 5.5 .217 0 PT 2 max 2.6 .102 dia. rod and locked in any (Roller can be rotated position through 360) 44.9 1.768 36.30.8 1.429.031 18.5 .728 12.5 Rod mounting metal .492 M6 mounting rod fastening screw with hexagonal holes M3x6 cover screw Top pin plunger 7. 276 dia. stainless steel plunger Rod fastening plate +0.008 .161 -0 dia. mounting holes 2-M5 (P=0.8) tapped 7 .276 in depth mounting holes 64 2.520 560.3 2.205.012 2-M5 (P=0.8) tapped mounting holes 2-M3x23 cover screw 15.1 .594 25 .984 (44.9) (1.768) Operating torque max.: 10.2 .402 3 .118 PT 1.5 max +0.2 dia. 2-4.1 0 mounting holes 4 .157 26.5 1.043 +0.008 .161 -0 dia. mounting holes M3x6 cover screw 2-M5 (P=0.8) tapped 7 .276 in depth mounting holes 20.40.3 .803.012 560.3 2.205.012 14 .551 210.2 .827.008 28 1.102 1,5 mm (0.060 in) 4,0 mm (0.158 in) 0,7 mm (0.028 in) 8,83 N (2 lb) 10.2 .402 M4 rod fastening plate screw with hexagonal holes Adjustable lenght of rod (30-118) +0.2 2-4.1 0 dia. mounting holes Plunger actuated switches 64 2.520 7.50.2 .295.008 20.40.3 .803.012 (Standard type) 2-M5 (P=0.8) tapped mounting holes 2-M3x23 cover screw 14 .551 210.2 .827.008 28 1.102 2 N to 7,84 N (0.45 lb to 1.76 lb) 7.50.2 15.1 .295.008 .594 25 .984 (Standard type) REFERENCE SZL-VL-C REFERENCE SZL-VL-D Top roller plunger 12.5 dia.x3.8 stainless steel roller 10.2 .402 PT 1.5 max 14.8 .583 +0.2 2-4.1 0 dia. mounting holes 38 1.496 4 .157 +0.008 .161 -0 dia. mounting holes M3x6 cover screw 20.40.3 .803.012 560.3 2.205.012 2-M5 (P=0.8) tapped 7 .276 in depth mounting holes 64 2.520 2-M5 (P=0.8) tapped mounting holes 2-M3x23 cover screw 14 .551 210.2 .827.008 28 1.102 15.1 .594 25 .984 REFERENCE SZL-VL-H 10 www.honeywell.com/sensing 7.50.2 .295.008 (Standard type) GLOBAL LIMIT SWITCHES Plunger actuated switches (continued) Wobble actuated switches Cross roller plunger Pretravel max. (PT): Overtravel min. (OT): Operating force max. (OF): 12.5 dia.x3.8 stainless steel roller 10.2 .402 30 mm (1.18 in) 20 mm (0.788 in) 0,88 N (0.2 lb) Plastic rod, coil spring PT 1.5 max 14.8 .583 +0.2 2-4.1 0 dia. mounting holes +0.008 .161 -0 dia. mounting holes 38 1.496 M3x6 cover screw 4 .157 3 dia. .118 Nylon rod 5.8 dia. .228 64 2.520 2-M5 (P=0.8) tapped mounting holes 2-M3x23 cover screw 14 .551 210.2 .827.008 28 1.102 15.1 .594 25 .984 REFERENCE SZL-VL-E 7.50.2 .295.008 10.2 .402 41.5 1.634 2-M5 (P=0.8) tapped 7 .276 in depth mounting holes 20.40.3 .803.012 560.3 2.205.012 PT 50 max 1001.5 3.937.059 +0.2 2-4.1 0 dia. mounting holes +0.008 .161 -0 dia. mounting holes 4 .157 (Standard type) M3x6 cover screw 560.3 2.205.012 2-M5 (P=0.8) tapped 20.40.3 .803.012 7 .276 in depth mounting holes 64 2.520 2-M5 (P=0.8) tapped mounting holes 2-M3x23 cover screw 210.2 .827.008 28 1.102 15.1 .594 25 .984 14 .551 7.50.2 .295.008 (Standard type) REFERENCE SZL-VL-F Coil spring SZL-VL-G 10.2 .402 PT 30 max 1.2 dia. .047 stainless steel wire 51.5 2.028 1001.5 3.937.059 +0.2 2-4.1 0 dia. mounting holes 4 .157 +0.008 .161 -0 dia. mounting holes M3x6 cover screw 560.3 2.205.012 20.40.3 .803.012 2-M5 (P=0.8) tapped 7 .276 in depth mounting holes 64 2.520 2-M5 (P=0.8) tapped mounting holes 2-M3x23 cover screw 14 .551 210.2 .827.008 28 1.102 15.1 .594 25 .984 7.50.2 .295.008 (Standard type) REFERENCE SZL-VL-G www.honeywell.com/sensing 11 GLOBAL LIMIT SWITCHES GLS Series switches offer a complete range of CENELEC approved products, and are suitable for most industrial applications. GLS Series Global Limit Switches The standard product EN 50041 norm defines the switch mounting centres as 30 mm x 60 mm and also defines the switching characteristics of the side rotary head with fixed lever, top pin plunger and top roller plunger. This means that the switch can be interchanged in the application with other EN 50041 switches with mounting and switching characteristics maintained. Honeywell offers many more head styles and switching options. The miniature EN 50047 product range offers the user a choice of plastic, metal and three conduit versions which are all mounting (20 mm x 22 mm) compatible with each other. The EN 50047 standard defines how the switches are mounted and the switching characteristics for fixed side rotary lever, top pin plunger and top roller plunger. Switching options: Electrical ratings SPDT Single Pole, Double Throw, Snap action contacts (1NC/1NO) IEC947-5-1/EN60947-5-1 Designation & Rated operational current Ie (A) Utilization Category at rated operational voltage Ue 120V 240V 380V 480V 500V 14 13 VA rating 600V 22 21 Make Break AC15 A600 6 3 1.9 1.5 1.4 1.2 7200 720 AC15 A300 6 3 - - - - 7200 720 AC15 B300 3 1.5 - - - - 3600 360 AC14 D300 0.6 0.3 - - - - 432 72 125V 250V DC13 Q300 0.55 0.27 69 69 DC13 R300 0.22 0.1 28 28 DPDT Double Pole, Double Throw Snap action contacts (2NC/2NO) 13 11 23 21 14 12 24 22 Actuators Operating characteristics Actuator type Body size Operating torque/force (OF) SPDT Lever types A, A*A, A*B, A4J Top pin plunger B Top roller plunger C Top roller lever D Wobble head E7B, E7D, K8B, K8C 12 EN50041 (GLA) DPDT Free position (FP) SPDT DPDT EN50041 (GLA) EN50047 (GLC, GLD, GLE) EN50041 (GLA) EN50047 (GLC, GLD, GLE) EN50041 (GLA) EN50047 (GLC, GLD, GLE) EN50041 (GLA) SPDT DPDT Travel to positive opening (PO) SPDT DPDT 0,330 N m (2.90 lb in) 0,120 N m (1.10 lb in) 16,0 N (3.60 lb) 13,0 N (2.90 lb) GLE only 16,0 N 3.60 lb 16,0 N (3.60 lb) 13,0 N (2.90 lb) GLE only 9,5 N (2.10 lb) 11,0 N (2.4 lb) 26 9,0 N (1.9 lb) GLE only SPDT DPDT Differential travel (DT) Operating point (OP) SPDT SPDT DPDT DPDT 12 55 0,165 N m (1.50 lb in) GLE only 16,0 N (3.60 lb) Overtravel (OT) 59 0 EN50047 (GLC, GLD, GLE) Pretravel (PT) 26 49 11.5 8 37,5 mm (1.48 in) 2,5 mm (0.10 in) 4,5 mm (0.18 in) 4,5 mm (0.18 in) 0,9 mm (0.035 in) 35,0 mm (1.38 in) 21,0 mm (0.83 in) 3,0 mm (0.12 in) 5,0 mm (0.20 in) 3,0 mm (0.12 in) 0,9 mm 0,6 mm (0.035 in) (0.024 in) 18,0 mm (0.71 in) 50,5 mm (2.00 in) 2,5 mm (0.10 in) 4,5 mm (0.18 in) 4,5 mm (0.18 in) 0,9 mm (0.035 in) 48,0 mm (1.89 in) 31,0 mm (1.22 in) 3,0 mm (0.12 in) 5,0 mm (0.20 in) 3,0 mm (0.12 in) 0,9 mm 0,6 mm (0.035 in) (0.024 in) 28,0 mm (1.10 in) 65,2 mm (2.57 in) 4,2 mm (0.165 in) 8,3 mm (0.33 in) 9,0 mm (0.35 in) 1,7 mm (0.067 in 61,0 mm (2.40 in) 39,25 mm (1.55 in) 3,45 mm (0.14 in) 5,2 mm (0.205 in) 1,3 mm (0.19 in) 35,8 mm (1.41 in) 8 __ 0,1 N (0.90 in lb) 6,9 mm (0.27 in) 18 __ __ 16 __ __ 0 EN50047 (GLC, GLD, GLE) 1,3 N (0.29 lb) 1,1 N (0.25 lb) GLE only www.honeywell.com/sensing 10 7 __ GLOBAL LIMIT SWITCHES GLA EN 50041 Standard metal body Top pin plunger Side rotary adjustable roller FP Mechanical life: up to 15 million Sealing: IP 67, NEMA 1, 4, 12, 13 Operating temperature: -25 C to 85 C (-13 F to 185 F) Approvals: IEC/EN 60947-5-1 AC15 A300/A600 DC13 Q300 UL, CSA, CE Switching options: SPDT Single Pole, Double Throw Snap action contacts (1NC/1NO) DPDT Double Pole, Double Throw Snap action contacts (2NC/2NO) HEAD OPTIONS Plastic roller CONTACT SPDT DPDT SPDT DPDT SPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm REFERENCE GLAA01A2A GLAA20A2A GLAB01A2A GLAB20A2A GLAC01A2A CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm 20 mm REFERENCE GLAA01A2B GLAA20A2B GLAB01A2B GLAB20A2B GLAC01A2B GLAC20A2B 37,5 (1.48) CONTACT SPDT DPDT SPDT DPDT SPDT DPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm 20 mm REFERENCE GLAA01B GLAA20B GLAB01B GLAB20B GLAC01B GLAC20B Top roller plunger Metal roller CONTACT SPDT DPDT SPDT DPDT SPDT DPDT Side rotary Side rotary adjustable metal rod FP CONTACT SPDT DPDT SPDT DPDT SPDT DPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm 20 mm REFERENCE GLAA01C GLAA20C GLAB01C GLAB20C GLAC01C GLAC20C 41 (1.61) 34 (1.34) 4,5 (.17) 75 No lever Top roller lever 3,2 (.13) 13,0 (.51) 32 - 134 75 (1.26 - 5,28) Levers: Levers for side rotary types are ordered separately (see pages 69-71 for details) CONTACT SPDT DPDT SPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 REFERENCE GLAA01A GLAA20A GLAB01A Plastic roller CONTACT SPDT DPDT SPDT DPDT SPDT DPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm 20 mm REFERENCE GLAA01A1A GLAA20A1A GLAB01A1A GLAB20A1A GLAC01A1A GLAC20A1A CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm 20 mm REFERENCE GLAA01A1B GLAA20A1B GLAB01A1B GLAB20A1B GLAC01A1B GLAC20A1B 65,2 FP(2.51) 35 (1.38) 15 (.6) CONTACT SPDT DPDT SPDT DPDT SPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm REFERENCE GLAA01A4J GLAA20A4J GLAB01A4J GLAB20A4J GLAC01A4J CONTACT SPDT DPDT SPDT DPDT SPDT DPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm 20 mm O 18,7 (.74) REFERENCE GLAA01D GLAA20D GLAB01D GLAB20D GLAC01D GLAC20D Metal roller CONTACT SPDT DPDT SPDT DPDT SPDT DPDT www.honeywell.com/sensing 13 GLOBAL LIMIT SWITCHES GLC EN 50047 Standard metal body GLA EN 50041 Standard metal body (continued) Wobble, coil actuator Wobble, cat whisker 22 (.87) 20 (.78) 24,75 (0.97) 3 (.12) R 2,15 (.08) CONTACT SPDT SPDT DPDT SPDT DPDT CONDUIT 1/2 in NPT PG 13,5 PG 13,5 20 mm 20 mm 30,5 (1.20) 30 (1.18) REFERENCE GLAA01E7B GLAB01E7B GLAB20E7B GLAC01E7B GLAC20E7B 55 (2.16) 3,5 (0.138) 14,5 (.57) 15,25 (.600) Coil wobble head, stainless steel spring actuator conduit thread PG 13,5 CONTACT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 REFERENCE GLAA01K8B GLAB01K8B Wobble, cat whisker, coil actuator Mechanical life: up to 10 million Sealing: IP 66, NEMA 1, 4, 12, 13 Operating temperature: -25 C to 85 C -13 F to 185 F Approvals: IEC/EN 60947-5-1 AC15 A300 DC13 Q300 UL, CSA, CE Switching options: SPDT Single Pole, Double Throw Snap action contacts (1NC/1NO) HEAD OPTIONS Side rotary CONTACT SPDT CONDUIT 1/2 in NPT REFERENCE GLAA01E7D CONTACT SPDT DPDT SPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 REFERENCE GLAA01K8C GLAA20K8C GLAB01K8C Plastic roller CONTACT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 REFERENCE GLCA01A1A GLCB01A1A CONDUIT 1/2 in NPT PG 13,5 20 mm REFERENCE GLCA01A1B GLCB01A1B GLCC01A1B Metal roller CONTACT SPDT SPDT SPDT 14 www.honeywell.com/sensing GLOBAL LIMIT SWITCHES GLC EN 50047 Standard metal body (continued) Side rotary adjustable Wobble, coil actuator Top pin plunger O 9.9 (.390) DT OP 180,5 (.709) CONTACT SPDT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 20 mm REFERENCE GLCA01B GLCB01B GLCC01B Plastic roller CONTACT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 REFERENCE GLCA01A2A GLCB01A2A Top roller plunger Mechanical life: Metal roller CONTACT SPDT SPDT SPDT 31,0 FP 1.22 CONDUIT 1/2 in NPT PG 13,5 20 mm CONTACT SPDT SPDT SPDT REFERENCE GLCA01A2B GLCB01A2B GLCC01A2B Side rotary adjustable, metal rod CONTACT SPDT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 20 mm REFERENCE GLCA01C GLCB01C GLCC01C CONDUIT 1/2 in NPT PG 13,5 20 mm REFERENCE GLCA01D GLCB01D GLCC01D up to 5 million CONDUIT 1/2 in NPT PG 13.5 20 mm REFERENCE GLCA01E7B GLCB01E7B GLCC01E7B Wobble, cat whisker 41 (1.61) Top roller lever 34 (1.34) 4,5 (.17) 75 3,2 (.13) O FP 39,2 (1.54) 32 - 134 75 (1.26 - 5,28) 15 (.6) CONTACT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 CONTACT SPDT SPDT SPDT REFERENCE GLCA01A4J GLCB01A4J Mechanical life: CONTACT SPDT SPDT www.honeywell.com/sensing 5 million CONDUIT 1/2 in NPT PG 13,5 REFERENCE GLCA01K8A GLCB01K8A 15 GLOBAL LIMIT SWITCHES GLD EN 50047 Double insulated standard body GLE EN 50047 Compatible 3 conduit metal standard body Side rotary adjustable Plastic roller/metal lever 22 (.87) 20 (.78) 24,75 (0.97) 3 (.12) CONTACT SPDT SPDT R 2,15 (.08) 55 (2.16) 30,5 (1.20) REFERENCE GLDA01A2A GLDB01A2A Metal roller/metal lever CONTACT SPDT SPDT SPDT 30 (1.18) CONDUIT 1/2 in NPT PG 13.5 CONDUIT 1/2 in NPT PG 13,5 20 mm REFERENCE GLDA01A2B GLDB01A2B GLDC01A2B 3,5 (0.138) 14,5 (.57) Side rotary adjustable metal rod 15,25 (.600) CONTACT SPDT SPDT conduit thread PG 13,5 CONDUIT 1/2 in NPT PG 13,5 REFERENCE GLDA01A4J GLDB01A4J CONDUIT 1/2 in NPT PG 13,5 20 mm REFERENCE GLDA01B GLDB01B GLDC01B Top pin plunger Mechanical life: Sealing: Operating temperature: Approvals: See GLC section IP 66, NEMA 1, 2, 13 -25 C to 85 C -13 F to 185 F IEC/EN 60947-5-1 AC15 A600 DC13 Q300 UL, CSA, CE Switching options: SPDT Single Pole, Double Throw Snap action contacts (1NC/1NO) CONTACT SPDT SPDT SPDT Mechanical life: up to 10 million Sealing: IP 66, NEMA 1, 4, 12, 13 Operating temperature: -25 C to 85 C -13 F to 185 F Approvals: IEC/EN 60947-5-1 AC15 A300 DC13 Q300 UL, CSA, CE Switching options: SPDT Single Pole, Double Throw Snap action contacts (1NC/1NO) DPDT Double Pole, Double Throw Snap action contacts (2NC/2NO) HEAD OPTIONS Top roller plunger Side rotary CONTACT SPDT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 20 mm REFERENCE GLDA01C GLDB01C GLDC01C CONDUIT 1/2 in NPT PG 13,5 20 mm REFERENCE GLDA01D GLDB01D GLDC01D HEAD OPTIONS See GLC section for dimension illustrations Side rotary Plastic roller/lever CONTACT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 REFERENCE GLDA01A1A GLDB01A1A Metal roller/lever CONTACT SPDT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 20 mm REFERENCE GLDA01A1B GLDB01A1B GLDC01A1B Top roller lever CONTACT SPDT SPDT SPDT Plastic roller Wobble, coil actuator CONTACT SPDT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 20 mm REFERENCE GLDA01E7B GLDB01E7B GLDC01E7B CONTACT SPDT SPDT DPDT REFERENCE GLEA01A1A GLEB01A1A GLEB24A1A CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm REFERENCE GLEA01A1B GLEA24A1B GLEB01A1B GLEB24A1B GLEC01A1B Metal roller CONTACT SPDT DPDT SPDT DPDT SPDT 16 CONDUIT 1/2 in NPT PG 13,5 PG 13,5 www.honeywell.com/sensing GLOBAL LIMIT SWITCHES GLE EN 50047 Compatible 3 conduit metal standard body (continued) Side rotary adjustable metal rod Offset side rotary roller Top roller lever 41 (1.61) FP 39,2 (1.54) 4,5 (.17) 34 (1.34) 75 3,2 (.13) 32 - 134 75 (1.26 - 5,28) Plastic roller CONTACT SPDT SPDT CONDUIT 1/2 in NPT PG 13,5 15 (.6) REFERENCE GLEA01A5A GLEB01A5A CONTACT SPDT DPDT CONDUIT PG 13,5 PG 13,5 REFERENCE GLEB01A4J GLEB24A4J Side rotary adjustable CONTACT SPDT DPDT SPDT DPDT SPDT DPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 13,5 20 mm 20 mm REFERENCE GLEA01D GLEA24D GLEB01D GLEB24D GLEC01D GLEC24D Wobble, coil actuator Top pin plunger 16 5 (2.37) OP DT 10 OT 35 (max) 100 (3.92) 18 (0.709) Plastic roller CONTACT SPDT DPDT SPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 REFERENCE GLEA01A2A GLEA24A2A GLEB01A2A CONTACT SPDT DPDT SPDT DPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 REFERENCE GLEA01B GLEA24B GLEB01B GLEB24B Mechanical life: Metal roller CONTACT SPDT SPDT DPDT CONDUIT 1/2 in NPT PG 13,5 PG 13,5 REFERENCE GLEA01A2B GLEB01A2B GLEB24A2B CONTACT SPDT DPDT SPDT DPDT Top roller plunger O 12,4 (0.49) 31,0 FP 1.23 CONTACT SPDT DPDT SPDT DPDT DPDT CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm up to 5 million CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 REFERENCE GLEA01E7B GLEA24E7B GLEB01E7B GLEB24E7B REFERENCE GLEA01C GLEA24C GLEB01C GLEB24C GLEC24C www.honeywell.com/sensing 17 COMPACT LIMIT SWITCHES SL1 Series Compact Limit Switches The SL1 Series compact limit switches are sealed, sensitive and have a long life. The compact size makes them suitable for the total miniaturization of machinery or equipment. Mechanical life: Sealing: Operating temperature: Approvals: Termination: Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): Electrical rating/contact: SL1-* SL1-* K 10 million IP 67, NEMA 3, 4, 13 -10 C to 70 C (14 F to 160 F) UL, CSA, CE Cable gland 11,76 N (2.64 lb) 1,5 mm (0.060 in) 3,0 mm (0.118 in) 0,10 mm (0.004 in) 5A - 125, 250 Vac Silver 0.1 A - 125 Vac; 0.1 A - 30 Vdc Gold clad cross point Switching options: SPDT Single Pole, Double Throw, Snap action contacts (1NC/1NO) Actuators OPTIONS Top pin plunger Top roller plunger, parallel, boot seal 11 D X 4W ROLLER PT 25,4 (OP) CONTACT Silver Gold clad cross point REFERENCE SL1-H SL1-HK Top roller plunger, parallel 18 REFERENCE SL1-B SL1-BK Top roller plunger, long, parallel 41,4 (OP) 31,4 (OP) CONTACT Silver Gold clad cross point CONTACT Silver Gold clad cross point REFERENCE SL1-A SL1-AK CONTACT Silver Gold clad cross point www.honeywell.com/sensing REFERENCE SL1-E SL1-EK COMPACT LIMIT SWITCHES Top roller plunger, perpendicular Top roller lever 31,4 (OP) CONTACT Silver Gold clad cross point REFERENCE SL1-D SL1-DK Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): CONTACT Silver Gold clad cross point 3,92 N (0.88 lb) 2,0 mm (0.079 in) 4,0 mm (0.158 in) 0,3 mm (0.012 in) REFERENCE SL1-P SL1-PK Top roller plunger, long, perpendicular 41,4 (OP) CONTACT Silver Gold clad cross point REFERENCE SL1-K SL1-KK www.honeywell.com/sensing 19 COMPACT LIMIT SWITCHES 14CE/914CE Series Miniature Enclosed Switches The 14CE/914CE Series offers a miniature, rugged, compact, pre-wired switch which has proved itself successful and gained wide market acceptance. The entire range of 14CE and 914CE switches has been approved to meet the requirements of the Low Voltage directive and is therefore CE marked. CE switches have different degrees of protection from IP66 to IP68 for the fully booted head styles. The cable entry is fully potted using a special compound to ensure that ingress is virtually impossible. Mechanical life: Sealing: Operating temperature: Approvals: Operating force (OF): Pretravel (PT): Overtravel (OT): Differential travel (DT): Contact/Rating: Connection: Actuators Switching options: 10 million IP66, IP67, IP68 NEMA 1, 2, 3, 3R, 4, 6, 6P, 12 (boot seal), 13 14CE 0 C to 70 C (32 F to 158 F) 914CE 0 C to 105 C (32 F to 221 F) 14CE CE 914CE CSA, UL, CE AC14 D300 DC13 R300 11,8 N (2,65 lb) max. 1,8 mm (0.71 in) max. 3,0 mm (0.118 in) min. 0,1mm (0.004 in) max. (9)14CE* -* Silver A (9)14CE* -*G Gold B (9)14CE* -Q, -AQ, -AQ1 Silver C Harmonised CENELEC 4 x 0,75 mm2 cable (14CE) SJTO 4 x 0,75 mm2 (18 AWG) cable (914CE) Connector (dc), 4 pin male, M12 thread (-Q) Connector (ac), 4 pin male, 1/2 in x 20 thread (-Q1) SPDT Single Pole, Double Throw Snap action contacts (1NC/1NO) S.P.D.T BROWN 2 14CE 914CE GREEN/YELLOW BLUE 1 3 BLACK Electrical ratings: A UL/CSA: B UL: C UL/CSA: Amps Make 1.2 5 3 3 240 Vac, ind. 240 Vac, res. 28 Vdc, res. 28 Vdc, ind. 5 A, 1/10 Hp, 125 or 250 Vac 1 A res., 0.5 A ind., 30 Vdc 1 A, 125 Vac 3 A, 125 or 250 Vac Operating point (OP) 1,8 max PT Free position (FP) O 14CE 7,4 (0.29) 914CE 8,65 (0.34) 20 Break 0.2 5 3 3 www.honeywell.com/sensing 3 min OT , , , Side exit cable (Option 'A') COMPACT LIMIT SWITCHES Plunger actuated switches OPTIONS Top pin plunger O 10,0 (0.39) Ball bearing plunger Top roller plunger, parallel O 12,4 (0.49) OP 15,7 (0.62) OP 28,4 (1.12) OP 24,4 (0.96) NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 3 ft cable, side exit 3 ft cable, bottom exit, gold contacts 6 ft cable, bottom exit 6 ft cable, bottom exit, gold contacts 9 ft cable, bottom exit Connector (dc), bottom exit Connector (ac), bottom exit REFERENCE 914CE1-3 914CE1-3A 914CE1-3G 914CE1-6 914CE1-6G 914CE1-9 914CE1-Q 914CE1-Q1 EUROPE 1 metre cable, bottom exit 1 metre cable, side exit 1 metre cable, bottom exit, gold contacts 2 metre cable, bottom exit 3 metre cable, bottom exit 3 metre cable, side exit 3 metre cable, bottom exit, gold contacts Connector (dc), side exit Connector (dc), bottom exit REFERENCE 14CE1-1 14CE1-1A 14CE1-1G 14CE1-2 14CE1-3 14CE1-3A 14CE1-3G 14CE1-AQ 14CE1-Q NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 6 ft cable, bottom exit REFERENCE 914CE66-3 914CE66-6 EUROPE/ 1 metre cable, bottom exit 2 metre cable, bottom exit REFERENCE 14CE66-1 14CE66-2 Adjustable plunger Top pin plunger, boot seal O 7,0 (0.28) OP NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 3 ft cable, side exit 3 ft cable, bottom exit, gold contacts 6 ft cable, bottom exit 6 ft cable, side exit 9 ft cable, bottom exit Connector (dc), side exit Connector (dc), bottom exit Connector (ac), bottom exit REFERENCE 914CE2-3 914CE2-3A 914CE2-3G 914CE2-6 914CE2-6A 914CE2-9 914CE2-AQ 914CE2-Q 914CE2-Q1 EUROPE 1 metre cable, bottom exit 1 metre cable, side exit 1 metre cable, bottom exit, gold contacts 2 metre cable, bottom exit 2 metre cable, side exit 3 metre cable, bottom exit 3 metre cable, side exit 3 metre cable, bottom exit, gold contacts Connector (dc), side exit Connector (dc), bottom exit REFERENCE 14CE2-1 14CE2-1A 14CE2-1G 14CE2-2 14CE2-2A 14CE2-3 14CE2-3A 14CE2-3G 14CE2-AQ 14CE2-Q Top roller plunger, parallel, boot seal OP 24,6 (0.98) O 12,4 (0.49) OP 34,4 (1.35) NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 3 ft cable, side exit 6 ft cable, bottom exit 9 ft cable, bottom exit 9 ft cable, side exit Connector (ac), side exit Connector (dc), bottom exit Connector (ac), bottom exit REFERENCE 914CE18-3 914CE18-3A 914CE18-6 914CE18-9 914CE18-9A 914CE18-AQ1 914CE18-Q 914CE18-Q1 EUROPE 1 metre cable, bottom exit 3 metre cable, bottom exit Connector (dc), bottom exit REFERENCE 14CE18-1 14CE18-3 14CE18-Q NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 9 ft cable, bottom exit REFERENCE 914CE19-3 914CE19-9 Manually operated Operating force (OF): OP 27,4 (1.08) M10x1 Thread NORTH AMERICA/GLOBAL Connector (dc), bottom exit REFERENCE 914CE31-3 914CE31-6 EUROPE 1 metre cable, bottom exit 3 metre cable, bottom exit REFERENCE 14CE31-1 14CE31-3 Top roller plunger, parallel, panel mounted Top pin plunger, panel mounted OP 29,2 (1.15) 17,5 N (3.82 lb) NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 6 ft cable, bottom exit Operating force (OF): NORTH AMERICA/GLOBAL 6 ft cable, bottom exit 9,0 N (2.02 lb) REFERENCE 914CE22-6 OP 42,5 (1.67) REFERENCE 914CE27-Q NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 6 ft cable, bottom exit Connector (dc), bottom exit www.honeywell.com/sensing REFERENCE 914CE28-3 914CE28-6 914CE28-Q 21 COMPACT LIMIT SWITCHES 14CE/914CE Series Plunger actuated switches (continued) Side rotary and wobble actuated switches Top roller plunger, perpendicular OPTIONS 5,1 (0.20) Rotary motion O 12,4 (0.49) OP 28,5 (1.12) NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 6 ft cable, bottom exit 6 ft cable, side exit 9 ft cable, bottom exit Connector (dc), bottom exit Connector (ac), bottom exit REFERENCE 914CE3-3 914CE3-6 914CE3-6A 914CE3-9 914CE3-Q 914CE3-Q1 EUROPE 1 metre cable, bottom exit 2 metre cable, bottom exit 3 metre cable, bottom exit REFERENCE 14CE3-1 14CE3-2 14CE3-3 Top roller plunger, perpendicular, boot seal OP 34,4 (1.35) (actuating lever not included - use any LSZ51*, LSZ52*, LSZ54*, LSZ55* or LSZ61* Series shown on page ?? Operating torque: Pretravel (PT): Overtravel (OT) mm: Differential travel: 0,3 Nm (2.66 in lb) 30 max. 40 min. 3 NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 3 ft cable, side exit 6 ft cable, bottom exit 9 ft cable, bottom exit Connector (dc), bottom exit REFERENCE 914CE16-3 914CE16-3A 914CE16-6 914CE16-9 914CE16-Q EUROPE 1 metre cable, bottom exit 2 metre cable, bottom exit 3 metre cable, bottom exit REFERENCE 14CE16-1 14CE16-2 14CE16-3 Wobble Spring wire Operating force (OF): NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 3 ft cable, side exit 17,5 N (3.82 lb) REFERENCE 914CE55-3 914CE55-3A Top roller plunger, perpendicular, panel mounted OP 42,5 (1.67) Operating Force (OF): NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 6 ft cable, bottom exit 22 REFERENCE 914CE29-3 914CE29-6 0,55 N (0.12 lb) NORTH AMERICA/GLOBAL 3 ft cable, bottom exit 6 ft cable, bottom exit 9 ft cable, bottom exit Connector (dc), bottom exit REFERENCE 914CE20-3 914CE20-6 914CE20-9 914CE20-Q EUROPE 1 metre cable, bottom exit 3 metre cable, bottom exit REFERENCE 14CE20-1 14CE20-3 www.honeywell.com/sensing COMPACT LIMIT SWITCHES 24CE/924CE Series Miniature Safety Electromechanical Switches Actuators For position sensing and switching applications requiring direct acting, positive opening contacts the 24CE and 924CE ranges are ideal. They have been tested and approved to meet the requirements of the Low Voltage directive and positive opening safety contacts per IEC/EN 60947-5-1-3. The devices are CE marked. The red colour clearly differentiates this safety component in the application. The 924CE range also has UL and CSA approval. It is possible for the end user to enhance the safety level of these switches from Category 1 on their own to Categories 2, 3 or 4 when the switches are used in conjunction with our wide range of FF-SR safety relays to form a safety system. Typical applications for these switches would use the roller plunger 24CE2- or 24CE3- style in conjunction with cams on doors with hinges; or our fixed side rotary 24CE16- style for detection of sliding doors. Also available are a range of panel mounting or top mounting versions to ensure that small space or difficult mounting can be simply achieved. Several contact arrangements are available. Mechanical life: 10 million Sealing: standard type: IP66; with boot seal type: IP67 Operating temperature: 24CE 0 C to 70 C (32 F to 158 F) Low temperature: -40 C (-40 F) 924CE 0 C to 105 C (32 F to 221 F) Approvals: 24CE CE AC15 B300 DC13 R300 924CE CSA, CE per UL file #E41859, 10 A 250 Vac; 1/3 Hp 125-250 Vac AC15 B300 DC13 R300 Connection: Harmonised CENELEC 3 or 5 x 0,75 mm2 cable (24CE) SJTO 3 or 5 x 18 AWG cable (924CE) Contacts: Silver Switching options: 924CE 24CE Slow action contacts (1NC) black blue red brown green green/yellow Slow action contacts (1NC/1NO), Break Before Make (BBM) black red blue Zb white brown green green/yellow Zb white black black Slow action contacts (1NC/1NO), Make Before Break (MBB) black blue red green Zb white brown green/yellow Zb black white Electrical ratings: Designation & Utilization Category AC15 B300 DC13 R300 black IEC 60947-5-1/EN 60947-5-1 Rated operational current le (A) at rated operational voltage Ue 120 V 240 V 380 V 480 V 500 V 600 V 3 1.5 125 V 250 V 0,22 0,1 VA rating Make Break 3600 360 28 28 40 / max. 1.58 16 / max. 0.63 25 / 0.98 Free position 2 Holes 5,1 dia Counter Bored 10,2 dia x 6 deep (both sides - option 'A' only) 49 / max. 1.93 8/ 0.32 1NC: 8,4 / .33 1NC/1NO: 9,5 / .374 www.honeywell.com/sensing Side exit cable (Option 'A') Note: connector versions also available 23 COMPACT LIMIT SWITCHES 24CE/924CE Series OPTIONS Top pin plunger, boot sealed Side rotary Top roller plunger, parallel o7,1 OT PT PT DT DT o12,4 OT 24,3 max. North America/Global North America/Global CABLE LENGTH CONTACT 6 ft 1NC/1NO, BBM North America/Global CABLE LENGTH CONTACT 3 ft 1NC, BBM 9 ft 1NC, BBM 3 ft 1NC, MBB 3 ft 1NC 9 ft 1NC REFERENCE 924CE16-S3 924CE16-S9 924CE16-T3 924CE16-Y3 924CE16-Y9 REFERENCE 924CE18-S6 Adjustable plunger Europe CABLE LENGTH CONTACT 1m 1NC/1NO, BBM 1m 1NC 6m 1NC 26,8 (1.05) REFERENCE 24CE16-S1 24CE16-Y1 24CE16-Y6 CABLE LENGTH CONTACT 3 ft 1NC/1NO, BBM o10 OPTION low temperature REFERENCE 924CE19-S3L1 17,5 max. North America/Global CABLE LENGTH CONTACT 3 ft 1NC, BBM 6 ft 1NC, BBM 9 ft 1NC, BBM 25 ft 1NC, MBB 3 ft 1NC, MBB 3 ft 1NC, MBB 6 ft 1NC, MBB 9 ft 1NC, MBB 9 ft 1NC, MBB 3 ft 1NC 9 ft 1NC OPTION side exit side exit side exit side exit REFERENCE 924CE1-S3 924CE1-S6 924CE1-S9 924CE1-T25A 924CE1-T3 924CE1-T3A 924CE1-T6A 924CE1-T9 924CE1-T9A 924CE1-Y3 924CE1-Y9 Europe CABLE LENGTH CONTACT 12 m 1NC/1NO, BBM 2m 1NC/1NO, BBM 2m 1NC/1NO, BBM 2m 1NC/1NO, BBM 3m 1NC/1NO, BBM 6m 1NC/1NO, BBM 1m 1NC 2m 1NC 3m 1NC 24 OPTION low temperature side exit low temperature side exit CABLE LENGTH CONTACT 15 ft 1NC, BBM 21 ft 1NC, BBM 3 ft 1NC, BBM 6 ft 1NC, BBM 6 ft 1NC, BBM 9 ft 1NC, BBM 25 ft 1NC, MBB 25 ft 1NC, MBB 3 ft 1NC, MBB 6 ft 1NC, MBB 9 ft 1NC, MBB 3 ft 1NC 9 ft 1NC OPTION side exit side exit REFERENCE 924CE2-S15 924CE2-S21 924CE2-S3 924CE2-S6 924CE2-S6A 924CE2-S9 924CE2-T25 924CE2-T25A 924CE2-T3 924CE2-T6 924CE2-T9 924CE2-Y3 924CE2-Y9 Europe North America/Global Top pin plunger 30,3 max. REFERENCE 24CE1-S12B 24CE1-S2 24CE1-S2A 24CE1-S2B 24CE1-S3 24CE1-S6 24CE1-Y1A 24CE1-Y2 24CE1-Y3 www.honeywell.com/sensing CABLE LENGTH CONTACT 1m 1NC/1NO, BBM 2m 1NC/1NO, BBM 2m 1NC/1NO, BBM 2m 1NC/1NO, BBM 3m 1NC/1NO, BBM 6m 1NC/1NO, BBM 2m 1NC/1NO, MBB 1m 1NC 2m 1NC 2m 1NC 4m 1NC 6m 1NC OPTION side exit low temperature side exit side exit REFERENCE 24CE2-S1 24CE2-S2 24CE2-S2A 24CE2-S2B 24CE2-S3 24CE2-S6 24CE2-T2 24CE2-Y1 24CE2-Y2 24CE2-Y2A 24CE2-Y4 24CE2-Y6A COMPACT LIMIT SWITCHES Top roller plunger, perpendicular Top roller plunger, parallel, boot sealed o12,4 30,3 max. o12,4 36,1 max. North America/Global North America/Global CABLE LENGTH CONTACT 3 ft 1NC, BBM 20 ft 1NC Y20 3 ft 1NC Y3L1 OPTION REFERENCE 924CE31-S6 924CE31- low temperature 924CE31- Europe CABLE LENGTH CONTACT 1m 1NC/1NO, BBM 2m 1NC/1NO, BBM 2m 1NC/1NO, BBM 5m 1NC/1NO, BBM 1m 1NC 2m 1NC 3m 1NC OPTION low temperature REFERENCE 24CE31-S1 24CE31-S2 24CE31-S2B 24CE31-S5 24CE31-Y1 24CE31-Y2 24CE31-Y3 CABLE LENGTH 3 ft 6 ft 9 ft 9 ft CONTACT 1NC, BBM 1NC, BBM 1NC, BBM 1NC, MBB REFERENCE 924CE3-S3 924CE3-S6 924CE3-S9 924CE3-T9 CONTACT 1NC/1NO, BBM 1NC 1NC REFERENCE 24CE3-S2 24CE3-Y1 24CE3-Y2 Europe CABLE LENGTH 2m 1m 2m Top roller plunger, perpendicular, boot sealed o12,4 Top roller plunger, parallel, panel mounted 27,7 (1.75) 36,1 max. Europe CABLE LENGTH 1m 2m 1m CONTACT 1NC/1NO, BBM 1NC/1NO, BBM 1NC REFERENCE 24CE55-S1 24CE55-S2 24CE55-Y1 North America/Global CABLE LENGTH CONTACT 15 ft 1NC, BBM S15 REFERENCE 924CE28- Europe CABLE LENGTH CONTACT 2m 1NC/1NO, BBM REFERENCE 24CE28-S2 www.honeywell.com/sensing 25 COMPACT LIMIT SWITCHES Blank page 26 www.honeywell.com/sensing COMPACT LIMIT SWITCHES LS Series Compact Limit Switches LS Series compact limit switches are carefully designed for accurate repeatability under the most stringent conditions. Compact size and field adjustable features greatly extend the flexibility of these switches. Heads may be positioned at 90 increments. Side rotary models can be adjusted for clockwise and/or counter-clockwise operation. Actuators can be set and locked in any position through 360. The rugged housings and actuator heads are constructed from cast aluminium, capable of withstanding physical abuse. Protection against oil, water and dust is achieved by O-ring seals on the actuator shaft; a ring seal between head and body; and a seated compression seal between cover and case. The LS fits in many places too small for any other fully adjustable limit switch. Conduit: Sealing: Operating temperature: Approvals: Contacts: Switching options: 1/2 in - 14 NPT 20 mm NEMA 1, 3, 4, 6, 13 IP67 -29 C to 71 C (-20 F to 160 F) -29 C to 121 C (-20 F to 250 F) UL, CSA Silver Cadmium Oxide (1) Fine Silver Single Pole, Double Throw Snap action contacts (1NC/1NO) 1/2 in - 14 NPT conduit 20 mm conduit Standard High LS-L Electrical ratings A, B, C, D, E Electrical ratings F, G SPDT 4 3 1 2 Actuators Electrical ratings: A 10 A, 120, 240 or 480 Vac; 1/3 hp, 120 Vac; 3/4 hp, 240 Vac; 0.8 A, 115 Vdc**; 0.4 A, 230 Vdc;** 0.1 A, 550 Vdc;** Pilot Duty, 600 Vac max. B 10 A, 120, 240 or 480 Vac; 1/4 hp, 120 Vac; 1/2 hp, 240 Vac. Pilot Duty, 600 Vac max. C 10 A, 120 Vac; 1/3 hp, 120 Vac. D 10 A, 120, 240, 480 Vac; 1/4 hp, 120 Vac; 1/2 hp, 240 Vac; 0.8 A, 115 Vdc**; 0.4 A, 230 Vdc**; 0.1 A, 550 Vdc**; Pilot Duty, 600 Vac max. E 10 A, 120, 240 or 480 Vac; 1/3 hp, 120 Vac; 3/4 hp, 240 Vac. Pilot Duty, 600 Vac max. F UL Rating: 10 A, 125, 250, or 480 Vac; 1/3 hp, 125 Vac; 3/4 hp, 250 Vac; 0.8 A, 125 Vdc**; 0.4 A, 250 Vdc** G UL Rating: 10 A, 125, 250 or 480 Vac; 1/4 hp, 125 Vac; 1/2 hp, 250 Vac; 0.8 A, 125 Vdc**; 0.4 A, 250 Vdc** ** Resistive rating (1) Designed for use with inductive loads such as relays, contactors, motors and solenoids. Honeywell does not recommend the use of silver cadmium oxide switch contacts in non-arcing loads. Non-arcing loads are generally loads less than 12 volts and/or 0.5 amp. www.honeywell.com/sensing 27 COMPACT LIMIT SWITCHES LS Series Side rotary actuated switches OPTIONS Adjustable roller lever Fixed length lever Operating force max. (OF): Pretravel max. (PT): Standard Low Standard Low Overtravel min. (OT) Differential travel max. (DT): Standard Low Switching options: Lever: 13,3 N (3.0 lb) 5,0 N (18 oz) 20 5 30 12 4 SPDT Aluminium, steel roller Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT) Differential travel max. (DT): 20 mm 20 mm Low PT/OF Low PT Low PT 20 mm High temperature High temperature 20 mm Indicator light Low OF 28 ELECTRICAL RATING A F A B B B A A C A REFERENCE 1LS1 1LS1-L 1LS1-4C 1LS131 1LS19 1LS19-4C 1LS243 1LS243-4C 1LS501 1LS6 Standard Low Switching options: Lever: CONDUIT CONDUIT Standard Low Standard Low Low PT Low OF/PT/DT www.honeywell.com/sensing ELECTRICAL RATING A F A B B 13,3 N (3.0 lb) 5,0 N (18 oz) 20 5 30 12 4 SPDT Aluminium, nylon roller REFERENCE 1LS3 1LS3-L 1LS3-4C 1LS58 1LS59 COMPACT LIMIT SWITCHES No lever Note: Levers are ordered separately (see pages 69-71 for details) Adjustable rod Operating force max. (OF): Standard Low Standard Low Pretravel max. (PT): Operating force max. (OF): Standard Low with standard PT Low with low PT Pretravel max. (PT): Standard Low Maintained contact Overtravel min. (OT) Standard Maintained contact Differential travel max. (DT): Standard Low PT Maintained contact Switching options: 0,51 N m (4.5 in lb) 0,21 N m (30 in oz) 0,11 N m (1 in lb) 20 5 55 30 35 12 4 20 SPDT Maintained contact Overtravel min. (OT) Differential travel max. (DT): 1,39 N (5 oz) 0,83 Nm (3 oz) 20 5 30 12 4 SPDT Aluminium rod Standard Low Switching options: Lever: CONDUIT 20 mm Low PT Low PT/OF/DT ELECTRICAL RATING A F A B B REFERENCE 1LS10 1LS10-L 1LS10-4C 1LS47 1LS53 SPDT contact CONDUIT 20 mm Low OF Low OF/PT Low PT ELECTRICAL RATING A F A A B B REFERENCE 1LS2 1LS2-L 1LS2-4C 1LS23 1LS56 1LS9 Maintained contact CONDUIT ELECTRICAL RATING A F Side rotary, yoke lever, maintained contact Operating force max. (OF): Pretravel max. (PT): Switching options: Lever: 6LS1 6LS3 8,9 N (2.0 lb) 55 Maintained Steel rollers on opposite sides of arm Nylon rollers on same side of arm REFERENCE 6LS2 6LS2-L CONDUIT 20 mm www.honeywell.com/sensing ELECTRICAL RATING A A A REFERENCE 6LS1 6LS1-4C 6LS3 29 COMPACT LIMIT SWITCHES LS Series Plunger actuated switches OPTIONS Top pin plunger Side pin plunger Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT) Differential travel max. (DT): Standard Low Standard Low Standard Low Switching options: 31,14 N (7 lb) 10 N (36 oz) 1,65 mm (0.065 in) 6,35 mm (0.25 in) 5,56 mm (0.219 in) 0,51 mm (0.020 in) 0,23 mm (0.009 in) SPDT Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT) Differential travel max. (DT): Switching options: CONDUIT 20 mm CONDUIT 20 mm Low OF/OT/DT ELECTRICAL RATING A F A E REFERENCE 2LS1 2LS1-L 2LS1-4C 2LS111 Top roller plunger Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT) Differential travel max. (DT): Switching options: 31,14 N (7 lb) 1,65 mm (0.065 in) 5,56 mm (0.219 in) 0,51 mm (0.020 in) SPDT Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT) Differential travel max. (DT): Switching options: 20 mm 20 mm 30 ELECTRICAL RATING A F A REFERENCE 4LS1 4LS1-4C Side roller plunger CONDUIT CONDUIT ELECTRICAL RATING A A 40,03 N (9 lb) 2,8 mm (0.110 in) 6,35 mm (0.25 in) 1,02 mm (0.040 in) SPDT REFERENCE 5LS1 5LS1-L 5LS1-4C www.honeywell.com/sensing ELECTRICAL RATING A A 40,03 N (9 lb) 2,8 mm (0.110 in) 5,56 mm (0.219 in) 1,02 mm (0.040 in) SPDT REFERENCE 3LS1 3LS1-4C COMPACT LIMIT SWITCHES Wobble actuated switches These switches will operate by moving actuator in any direction except direct pull. Operating force max. (OF): Pretravel max. (PT): Switching options: 1,39 N (5 oz) 28,6 mm (1,125 in) SPDT OPTIONS Flexible cable Coil spring O 6,17 0.08 (0.264 0.003) O 4,80 0.08 (0.189 0.003) 141,0 2,54 (5,550 0.10) 141,0 2,54 (5,550 0.10) CONDUIT 20 mm ELECTRICAL RATING D G D REFERENCE 8LS1 8LS1-L 8LS1-4C CONDUIT 20 mm ELECTRICAL RATING D D REFERENCE 8LS152 8LS152-4C Steel wire Spring rod Operating force max. (OF): Pretravel max. (PT): 0,28 N (1 oz) 63,5 mm (2.5 in) 191,3 (7.53) CONDUIT 20 mm CONDUIT 20 mm ELECTRICAL RATING D D ELECTRICAL RATING D D REFERENCE 8LS125 8LS125-4C REFERENCE 8LS3 8LS3-4C www.honeywell.com/sensing 31 PRECISION LIMIT SWITCHES BF Series Plastic Enclosed Basic Switches BF Series Plastic Enclosed Basic Switches are available with a wide variety of actuators, and are designed for easy mounting and wiring. BF switches are designed to allow mounting with the cover either towards or away from the mounting surface. Switches with lever type actuators are adjustable in two directions. The entire actuator can be rotated around its mounting bushing, and the angle of the lever can also be changed. Sealing: Operating temperature: Approvals: Termination: Contacts: Electrical ratings: NEMA 1, 3, 4, 13 -32 C to 71 C (-25 F to 160 F) UL 1/2 in - 14NPT Silver 11 A - 125 Vac, 250 Vac or 277 Vac 5 A - 125 Vac, 250 Vac or 277 Vac A B Switching options: SPDT Single Pole, Double Throw, Snap action contacts (1NC/1NO) Actuators Plunger actuated switches OPTIONS Top pin plunger 14,3 0.56 Top roller arm, adjustable 18,3 0.72 O 7,1 Max. 0.28 ,9 39 7 1.5 17,5 0.69 65,28 2.57 23,1 0.91 Max. 44,5 1.75 15,5 35,1 0.61 1.38 17,5 0.69 4,9 9,5 0.19 0.38 58,7 2.31 73,5 2.89 Conduit thread 44,5 1.75 Operating force max. (OF): Differential travel max. (DT): ACTUATOR POSITION Left Right 73,6 2.90 12,23 N (44 oz) 0,64 mm (0.025 in) ELECTRICAL RATING B B 4,9 9,5 0.19 0.38 REFERENCE BFL1-BP1 BFR1-BP1 15,5 35,1 0.61 1.38 58,7 2.31 73,5 2.89 Operating force max. (OF): Differential travel max. (DT): ACTUATOR POSITION Left Right 32 www.honeywell.com/sensing 10,56 N (38 oz) 1,65 mm (0.065 in) ELECTRICAL RATING B B REFERENCE BFL1-BL1 BFR1-BL1 PRECISION LIMIT SWITCHES Plunger actuated switches (continued) Wobble actuated switches Operating force max. (OF): 1,95 N (7 oz) OPTIONS Coil spring Top roller arm, adjustable, one way Spring wire 14,3 0.56 14,3 0.56 O 7,1 Max. 0.28 O 1,02 0.05 39 1.5 ,6 6 19,05 0.75 18,3 0.72 32,26 1.27 180 169,9 6.69 17,5 0.69 35,1 1.38 O 15,5 0.61 168,8 6.65 73,6 2.90 44,5 1.75 17,5 0.69 14,73 0.58 58,7 2.31 9,5 0.38 4,9 0.19 Operating force max. (OF): Left Right ELECTRICAL RATING B B 15,5 35,1 0.61 1.38 44,5 1.75 35,1 1.38 44,5 1.75 73,5 2.89 ACTUATOR POSITION Left Right 17,5 0.69 58,7 2.31 73,5 2.89 4,9 9,5 0.19 0.38 3,61 N (13 oz) 10,56 N (38 oz) REFERENCE BFL1-BL3 BFR1-BL3 ACTUATOR POSITION Left Left Right 4,9 9,5 0.19 0.38 ELECTRICAL RATING A B B 73,5 2.89 REFERENCE BFL1-AW1 BFL1-BW1 BFR1-BW1 14,7 15,5 0.58 0.61 58,7 2.31 ACTUATOR POSITION Left Right ELECTRICAL RATING B B REFERENCE BFL1-BW4 BFR1-BW4 Plastic Low force rod 14,3 0.56 250 O 7,1 0.28 18,3 0.72 17,5 0.69 73,6 2.90 44,5 1.75 4,9 0.19 35,1 1.38 9,5 0.38 14,73 0.58 58,7 2.31 O 15,5 0.61 249,25 9.81 73,5 2.89 Operating force max. (OF): Left Right ACTUATOR POSITION Left Right ELECTRICAL RATING B B 10,56 N (38 oz) 3,61 N (13 oz) 17,5 0.69 REFERENCE BFL1-BL2 BFR1-BL2 44,5 1.75 4,9 0.19 35,1 1.38 9,5 0.38 15,5 0.61 58,7 2.31 C 73,5 2.89 Type -BW3 ACTUATOR POSITION Left, 179,3 mm (7.06 in) length rod Left, 249,25 mm (9.8 in) length rod ELECTRICAL RATING A REFERENCE B BFL1-BW3 BFL1-AW2 www.honeywell.com/sensing 33 PRECISION LIMIT SWITCHES BZE/DTE Series Compact Enclosed Switches The BZE/DTE Series general purpose enclosed limit switches offer precision operation and sturdy actuation in a compact but rugged aluminium housing. The large wiring enclosure means that the user can get access to wire the device simply. The switch incorporates high repeatability of the switch point early in the travel of the switch. This is achieved through a very tolerant over-travel mechanism which ensures that application drift will not affect long term accuracy of the switch. Conduit: Sealing: Operating temperature: E6 V6 Standard Low Approvals: Contacts: Electrical ratings A, B, C Electrical rating D Switching options: SPDT 1/2 in - 14 NPT NEMA 1 NEMA 1, 3 -32 C to 71 C (-25 F to 160 F) -40 C to 71C (-40 F to 160 F) UL, CSA, CE Silver Gold Single Pole, Double Throw Snap action contacts (1NC/1NO) Actuators DPDT Double Pole, Double Throw Snap action contacts (2NC/2NO) Electrical ratings: A UL/CSA Rating: 34 15 A, 125, 250 or 480 Vac: 2 A, 600 Vac: 1 /8 Hp, 125 Vac: 1/4 Hp, 250 Vac: 1/2 A, 125 Vdc: 1/4 A, 250 Vdc B UL/CSA Rating: 10 A, 125 or 250 Vac: 0.3 A, 125 Vdc: 0.15 A, 250 Vdc C UL/CSA Rating: 15 A, 125, 250 or 480 Vac; 1/4 Hp, 125 Vac; 1/2 Hp, 250 Vac; 1/2 A, 125 Vdc; 1/4 A, 250 Vdc D UL/CSA Rating: 1 A - 125 Vac www.honeywell.com/sensing PRECISION LIMIT SWITCHES E6/V6 E6 (side mount) and V6 (flange mount) switches are offered with or without actuator seal boots. Both have a combination insulator/ seal cemented inside the bottom enclosure. Lead washers are used to seal the mounting holes on side mount switches. All side mount switches are installed with #6 screws, except the BZE6-2RN7 (#8 screws). Removal of the bottom enclosure exposes the terminals for easy wiring. Momentary contact OPTIONS Top pin plunger 2,0 REF (0.08) 23,4 (0.92) 43,7 OP (1.72) 19,0 (0.75) 25,4 (1.00) 25,4 (1.00) Top roller plunger, parallel 10,6 (0.42) O 8,4 (0.33) 1/2-14 NPT Threads 63,5 OP (2.50) 25,4 (1.00) 56,6 OP (2,23) 77,2 (3.04) 41,4 (1.63) 25,4 (1.00) 54,1 (2.13) Flange mount without boot seal Side mount with boot seal OP 49,61 (1.953) 1/2-14 NPT Threads With boot seal Operating force max. (OF):SPDT Standard 2,50 N to 6,67 N (9 oz to 24 oz) SPDT Low temperature 4,17 N to 10,84 N (15 oz to 39 oz) DPDT 6,95 N to 16,4 N (25 oz to 59 oz) Pretravel max. (PT): SPDT 1,98 mm (0.078 in) DPDT 2,8 mm (0.110 in) Overtravel min. (OT): SPDT 5,56 mm (0.219 in) DPDT 3,18 mm (0.125 in) Differential travel max. (DT): SPDT 0.05 mm (0.002 in) DPDT 1,52 mm (0.060 in) 25,4 (1.00) 25,4 (1.00) 25,4 (1.0) 22,6 (0.89) 77,2 (3.04) Side mount with boot seal Side mount without boot seal With boot seal Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): Low temperature/High OF #8 screws Gold contacts SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT ELECTRICAL RATING A B A A D REFERENCE BZE6-2RN DTE6-2RN BZE6-2RN34 BZE6-2RN7 BZE6-2RN72 22,6 (0.89) 69,6 (2.740) 25,4 (1.00) Side mount CONTACT SPDT DPDT SPDT SPDT SPDT O 15,75 (0.62) 19,0 (0.75) 19,0 (0.75) 22,6 (0.89) 21,1 (0.83) 12,7 (0.50) O X 4,6 (0.18) Wide Roller 12,7 (0.50) O X 4,6 (0.18) W Roller 1/2-14 NPT Threads 4,3 O (2) (0.17) 44,4 (1.75) 22,6 (0.89) 77,2 (3.04) 23,4 (0.92) O 8,4 (0.33) 2,50 N to 6,67 N (9 oz to 24 oz) 5,56 N to 13,34 N (20 oz to 48 oz) 1,98 mm (0.078 in) 2,8 mm (0.110 in) 5,56 mm (0.219 in) 3,18 mm (0.125 in) 0,01 mm to 0,05 mm (0.0004 in to 0.0020 in) 1,52 mm (0.060 in) Side mount CONTACT SPDT DPDT ELECTRICAL RATING A B REFERENCE BZE6-2RN80 DTE6-2RN80 ELECTRICAL RATING A REFERENCE BZV6-2RN80 Flange mount Flange mount CONTACT SPDT DPDT ELECTRICAL RATING A B REFERENCE BZV6-2RN DTV6-2RN CONTACT SPDT CONDUIT Without boot seal Operating force max. (OF): Without boot seal Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT 2,50 N to 3,61 N (9 oz to 13 oz) 5,56 N to 11,12 N (20 oz to 40 oz) 0,38 mm (0.015 in) 3,81 mm (0.150 in) 5,56 mm (0.219 in) 2,24 mm (0.088 in) 0,05 mm (0.002 in) 1,52 mm (0.060 in) Side mount CONTACT SPDT DPDT ELECTRICAL RATING A B REFERENCE BZE6-2RQ DTE6-2RQ Flange mount CONTACT SPDT Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): 2,50 N to 3,61 N (9 oz to 13 oz) 6,67 N to 13,34 N (24oz to 48 oz) 0,38 mm (0.015 in) 3,58 mm (0.141 in) 3,55 mm (0.140 in) 3,18 mm (0.125 in) 0,05 mm (0.002 in) 1,52 mm (0.060 in) Side mount CONTACT SPDT Field adjustable roller SPDT Field adjustable roller DPDT CONDUIT ELECTRICAL RATING A A B REFERENCE BZE6-2RQ8 BZE6-2RQ9 DTE6-2RQ9 CONDUIT ELECTRICAL RATING A REFERENCE BZV6-2RQ8 Flange mount CONTACT SPDT ELECTRICAL RATING A SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT REFERENCE BZV6-2RQ www.honeywell.com/sensing 35 PRECISION LIMIT SWITCHES BZE/DTE Series E6/V6 Momentary contact (continued) Top roller plunger, perpendicular Roller arm, adjustable 12,7 (0.50) O X 4,6 (0.18) W Roller 56,6 OP (2,23) 19,0 (0.75) 25,4 (1.00) 25,4 (1.00) 22,6 (0.89) 77,2 (3.04) Side mount with boot seal Flange mount without boot seal With boot seal Operating Force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): 2,60 N to 6,67 N (9 oz to 24 oz) 1,98 mm (0.078 in) 5,56 mm (0.219 in) 0,01 mm to 0,05 mm (0.0004 in to 0.0020 in) Side mount CONTACT SPDT ELECTRICAL RATING A REFERENCE BZE6-2RN81 Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): SPDT DPDT SPDT DPDT SPDT DPDT SPDT DPDT 2,50 N to 3,61 N (9 oz to 13 oz) 6,67 N to 13,34 N (24 oz to 48 oz) 0,38 mm (0.015 in) 3,58 mm (0.141 in) 3,55 mm (0.140 in) 3,18 mm (0.125 in) 0,05 mm (0.002 in) 1,52 mm (0.060 in) Side mount CONTACT SPDT DPDT Flange mount with boot seal Operating temperature: Standard Low Roller: -32 C to 71 C (-25 F to 160 F) -40 C to 71 C (-40 F to 160 F) Steel With boot seal Operating Force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): SPDT DPDT 2,78 N to 5,56 N (10 oz to 20 oz) 4,78 mm (0.188 in) 5,56 mm (0.219 in) 0,15 mm (0.006 in) 4,19 mm (0.165 in) DPDT DPDT 13,34 N (48 oz) 7,92 mm (0.312 in) Side mount Without boot seal Operating Force max. (OF): Side mount without boot seal ELECTRICAL RATING A B REFERENCE BZE6-2RQ81 DTE6-2RQ81 ELECTRICAL RATING A REFERENCE BZV6-2RQ81 Operating Force max. (OF): Pretravel max. (PT): CONTACT SPDT DPDT Low temperature SPDT ELECTRICAL RATING A B A REFERENCE BZE6-2RN2 DTE6-2RN2 BZE6-2RN234 Flange mount Operating Force max. (OF): Pretravel max. (PT): CONTACT SPDT DPDT DPDT DPDT 2,78 N to 8,34 N (10 oz to 30 oz) 6,76 mm (0.266 in) ELECTRICAL RATING A B REFERENCE BZV6-2RN2 DTV6-2RN2 Flange mount CONTACT SPDT Without boot seal Operating Force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): Side mount Flange mount 36 CONTACT SPDT SPDT www.honeywell.com/sensing 2,78 N to 5,00 N (10 oz to 20 oz) 4,78 mm (0.188 in) 5,56 mm (0.219 in) 0,15 mm (0.006 in) ELECTRICAL RATING A A REFERENCE BZE6-2RQ2 BZV6-2RQ2 PRECISION LIMIT SWITCHES One way roller lever Manual palm button 36,6 1.44 18,3 0.72 38,1 1.50 31,8 1.25 1/2 - 14 NPSM 5 THREADS MIN 78,5 3.09 4,3 O (2) 0.17 44,4 1.75 22,6 0.89 77,2 3.04 Side mount with boot seal Side mount with boot seal With boot seal Operating Force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): CONTACT SPDT Side mount 41,4 1.63 25,4 1.00 54,1 2.13 With boot seal 2,22 N to 5,56 N (8 oz to 20 oz) 5,94 mm (0.234 in) 5,56 mm (0.219 in) 0,15 mm (0.006 in) ELECTRICAL RATING A REFERENCE BZE6-2RN28 Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): Flange mount Rod lever CONTACT SPDT 2,78 N to 5,56 N (10 oz to 20 oz) 4,78 mm (0.188 in) 5,56 mm (0.219 in) 0,15 mm (0.006 in) ELECTRICAL RATING A REFERENCE BZV6-2RN4 Wobble, coil spring Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): 18,24 mm (0.718 in) 21,29 mm (0.838 in) 5,82 mm (0.229 in) These switches will operate by moving actuator in any direction except direct pull. 152,4 (6.0) 18,29 (0.72) 250 53,19 (2.09) O 15,75 (0.62) 19,05 (0.75) 25,4 (1.00) 22,6 (0.89) 69,60 (2,74) 77,2 (3.04) Flange mount without boot seal With boot seal With boot seal Operating force max. (OF): Side mount Flange mount CONTACT SPDT SPDT Flange mount with boot seal Side mount with boot seal 0,83 N to 1,95 N (3 oz to 7 oz) ELECTRICAL RATING A A REFERENCE BZE6-2RN62 BZV6-2RN62 Operating force max. (OF): Pretravel max. (PT): Side mount Flange mount CONTACT SPDT SPDT 1,95 N (7 oz) 15 ELECTRICAL RATING A A REFERENCE BZE6-2RN18 BZV6-2RN18 Without boot seal Operating force max. (OF): Side mount Flange mount CONTACT SPDT SPDT 0,56 N to 1,39 N (2 oz to 5 oz) ELECTRICAL RATING A A REFERENCE BZE6-2RQ62 BZV6-2RQ62 www.honeywell.com/sensing 37 PRECISION LIMIT SWITCHES BZE/DTE Series E6/V6 Maintained contact (reset) switches The switches shown below provide maintained contact after the operating force on either top or bottom plunger is released. Note: The top plungers on these switches provide more accurate and uniform operation than the "reset" plungers and should be used when closely held operating characteristics are required. Switching: SPDT Single Pole, Double Throw (1NC/1NO) Maintained OPTIONS Top pin plunger Roller arm, adjustable Side mount with boot seal Flange mount without boot seal Side mount Operating force max. (OF): With boot seal Without boot seal Pretravel max. (PT): With boot seal Without boot seal Overtravel min. (OT): CONTACT With boot seal SPDT Maintained Without boot seal SPDT Maintained 1,67 N to 5,56 N (6 oz to 20 oz) 1,67 N to 2,64 N (6 oz to 9.5 oz) 1,98 mm (0.078 in) 0.30 mm (0.012 in) 4,75 mm (0.187 in) ELECTRICAL RATING C C REFERENCE BZE6-RNX1 BZE6-RQX2 Flange mount with boot seal Side mount Operating Force max. (OF): With boot seal Without boot seal Pretravel max. (PT): Overtravel min. (OT): CONTACT With boot seal Maintained Without boot seal Maintained Top roller plunger O 12,7 (0.50) x 4,6 (0.18) Wide roller 56,69 (2.232) 53,19 (2.094) Reset FP 19,0 (0.75) O 15,75 (0.62) 25,4 (1.00) 22,6 (0.89) O 25,4 (1.0) 14,22 (0.56) Side mount with boot seal 40,08 (1.58) 23,19 (0.913) Side mount without boot seal 69,59 (2.74) Side mount Operating force max. (OF): With boot seal 3,34 N to 15,57 N (12 oz to 56 oz) Without boot seal 1,67 N to 2,64 N (6 oz to 9.5 oz) Pretravel max. (PT): With boot seal 1,98 mm (0.078 in) Without boot seal 0,30 mm (0.012 in) Overtravel min. (OT): With boot seal 4,75 mm (0.187 in) Without boot seal 3,55 mm (0.140 in) CONTACT With boot seal SPDT Without boot seal SPDT 38 CONDUIT ELECTRICAL RATING C C Side mount without boot seal REFERENCE BZE6-RN80X2 BZE6-RQ8X2 www.honeywell.com/sensing CONDUIT ELECTRICAL RATING C C 4,45 N (16 oz) 3,34 N (12 oz) 4,78 mm (0.188 in) 5,56 mm (0.219 in) REFERENCE BZE6-RN2X1 BZE6-RQ2X2 PRECISION LIMIT SWITCHES E7 Metal standard enclosed switch Mechanical life: Sealing: 10 million IP50 Standard IP65 Sealed -30 C to 70 C (-22 F to 158 F) IEC 60947-5-1 EN 60947-5-1 Without boot seal With boot seal Operating temperature: Approvals: Switching options: SPDT Actuators Single Pole, Double Throw Snap action contacts (1NC/1NO) Top roller plunger, perpendicular, without boot seal DPDT Double Pole, Double Throw Snap action contacts (2NC/2NO) 0,38 (0.015) Pretravel O 12,7 x 4,57 Wide roller (0.50 x 0.18) 44,53 OP (1.75) 13,97 (0.55) 25,4 (1.00) O 14,73 (0.58) 5,84 (0.23) 4,06 (0.16) CONTACT SPDT OPTIONS Top pin plunger With boot seal CONDUIT PG 13.5 12,7 (0.50) 76,40 (3,01) ELECTRICAL RATING REFERENCE BZE7-2RQ81-PG Top roller lever, boot seal 1,93 (0.076) Pretravel O 19,05 x 7,92 wide roller (O 0.75 x 0.312) 39,88 (1.57) O 8,38 (0.33) 18,29 (0.72) 24,38 (0.91) 225 38,58 OP (1.519) 13,97 (0.55) 48,11 (1.894) 25,4 (1.00) 13,97 (0.55) O 14,73 (0.58) 5,84 (0.23) 4,06 (0.16) 76,40 (3,01) 25,4 (1.00) 12,7 (0.50) O 14,73 (0.58) 5,84 (0.23) CONTACT SPDT SPDT DPDT CONDUIT PG 13.5 20 mm PG 13.5 ELECTRICAL RATING CONDUIT PG 13.5 ELECTRICAL RATING REFERENCE BZE7-2RN-PG BZE7-2RN-C DTE7-2RN-PG CONTACT SPDT SPDT 4,06 (0.16) CONDUIT PG 13.5 20 mm 76,40 (3,01) 12,7 (0.50) ELECTRICAL RATING REFERENCE BZE7-2RN2-PG BZE7-2RN2-C Without boot seal CONTACT SPDT REFERENCE BZE7-2RQ-PG Top roller plunger, parallel, without boot seal 3,8 (0.15) Pretravel Wobble, coil spring, boot seal 151,13 (5.95) O 12,7 x 4,5 wide roller (O 0.50 x 0.18) 13,97 (0.55) 44,5 OP (1.75) 13,97 (0.55) 25,4 (1.00) 25,4 (1.00) O 14,73 (0.58) 5,84 (0.23) CONTACT SPDT 4,06 (0.16) CONDUIT PG 13.5 76,40 (3,01) O 14,73 (0.58) 5,84 (0.23) 4,06 (0.16) 12,7 (0.50) ELECTRICAL RATING CONTACT SPDT CONDUIT PG 13.5 76,40 (3,01) 12,7 (0.50) ELECTRICAL RATING REFERENCE BZE7-2RN18-PG REFERENCE BZE7-2RQ8-PG www.honeywell.com/sensing 39 PRECISION LIMIT SWITCHES The BAF/DTF Series is available with or without boot seals. The elastomer boot on sealed actuator versions protects the actuating mechanism and the internal basic switch from contamination. They are therefore suitable for wash-down applications. Both sealed and unsealed versions are available with the actuators on the right or left hand side. BAF/DTF Series High Capacity Enclosed Switches The cover plate is removable to allow ease of wiring and switch replacement without having to dismount the housing. The BAF/DTF Series is suitable for use in packaging equipment, farm machinery, conveyors, overhead cranes and hoists. Actuators Approvals: Sealing: Operating temperature: Conduit: Contacts: Electrical ratings: B D Switching options: D SPDT UL, CSA NEMA 1, 3, 4, 13 -2RQ9 NEMA 1 -32 C to 71 C (-25 F to 160 F) 1/2 in - 14 NPT Silver UL/CSA Rating: 10 A, 125 or 250 Vac; 0.3 A, 125 Vdc; 0.15 A, 250 Vdc. Momentary contact OPTIONS Top pin plunger UL/CSA Rating: 20 A, 125, 250 or 480 Vac; 1 Hp, 125 Vac; 2 Hp, 250 Vac; 1/2 A, 125 Vdc; 1/4 A, 250 Vdc; Lamp Load - 10 A, 125 Vac. Single Pole, Double Throw Snap action contacts (1NC/1NO) Left-hand Right-hand *28,2 on DTF2 Types 1.11 With boot seal B DPDT Double Pole, Double Throw Snap action contacts (2NC/2NO) Operating force max. (OF): Pretravel max. (PT): BAF/DTF BAF DTF Overtravel min. (OT): BAF DTF Differential travel max. (DT): BAF DTF Operating position (OP): BAF DTF ACTUATOR POSITION Right Left Right Left 40 www.honeywell.com/sensing CONTACT SPDT SPDT DPDT DPDT ELECTRICAL RATING D D B B 11,2 N (2.5 lb) 2,39 mm (0.094 in) 3,59 mm (0.141 in) 5,56 mm (0.219 in) 3,96 mm (0.156 in) 0,26 mm (0.010 in) 1,53 mm (0.060 in) 53,19 mm (2.094 in) 52,07 mm (2.050 in) REFERENCE BAF1-2RN-RH BAF1-2RN-LH DTF2-2RN-RH DTF2-2RN-LH PRECISION LIMIT SWITCHES Momentary contact (continued) Top roller plunger, parallel Right-hand Roller arm, adjustable Left-hand *28,2 on DTF2 Types 1.11 O-ring actuator seal Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): BAF/DTF BAF/DTF BAF DTF Differential travel max. (DT): BAF DTF Operating position (OP): BAF DTF ACTUATOR POSITION Right Left Right Left CONTACT SPDT SPDT DPDT DPDT ELECTRICAL RATING D D B B 35,6 N (8.0 lb) 3,18 mm (0.125 in) 4,75 mm (0.187 in) 3,18 mm (0.125 in) 0,19 mm (0.0075 in) 1,53 mm (0.060 in) 64,69 mm (2.547 in) 63,88 mm (2.515 in) REFERENCE BAF1-2RQN8-RH BAF1-2RQN8-LH DTF2-2RQN8-RH DTF2-2RQN8-LH Adjustable 360 horizontally BAF/DTF BAF DTF Overtravel min. (OT): BAF DTF Differential travel max. (DT): BAF DTF Operating position (OP): BAF DTF ACTUATOR POSITION Right Left Right Left CONTACT SPDT SPDT DPDT DPDT ELECTRICAL RATING D D B B Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): ACTUATOR POSITION Right Left Right Right Field adjustable roller plunger Operating force max. (OF): Pretravel max. (PT): With boot seal 11,2 N (2.5 lb) 2,39 mm (0.094 in) 3,18 mm (0.125 in) 3,96 mm (0.156 in) 3,18 mm (0.125 in) 0,26 mm (0.010 in) 1,53 mm (0.060 in) 64,69 mm (2.547 in) 63,88 mm (2.515 in) CONTACT SPDT SPDT DPDT DPDT BAF DTF BAF DTF BAF DTF BAF DTF ELECTRICAL RATING D D B B 8,90 N (2.0 lb) 11,1 N (2.5 lb) 5,56 mm (0.219 in) 7,93 mm (0.312 in) 6,35 mm (0.25 in) 5,56 mm (0.219 in) 0,51 mm (0.020 in) 3,05 mm (0.120 in) REFERENCE BAF1-2RN2-RH BAF1-2RN2-LH DTF2-2RN2-RH DTF2-2RN2-LH One way roller lever REFERENCE BAF1-2RQ9-RH BAF1-2RQ9-LH DTF2-2RQ9-RH DTF2-2RQ9-LH With boot seal Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): ACTUATOR POSITION Right Left www.honeywell.com/sensing CONTACT SPDT SPDT 8,90 N (2.0 lb) 5,56 mm (0.219 in) 6,35 mm (0.25 in) 0,51 mm (0.020 in) ELECTRICAL RATING D D REFERENCE BAF1-2RN28-RH BAF1-2RN28-LH 41 PRECISION LIMIT SWITCHES BAF/DTF Series Momentary contact (continued) Maintained contact (reset) switches Manual palm button Top pin plunger Right-hand Left-hand *28,2 on DTF2 Types 1.11 With boot seal With boot seal Operating force max. (OF): ACTUATOR POSITION Right Left CONTACT SPDT SPDT 8,90 N (2.0 lb) ELECTRICAL RATING D D REFERENCE BAF1-2RN4-RH BAF1-2RN4-LH Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): ACTUATOR POSITION Right Wobble, coil spring CONTACT Maintained SPDT ELECTRICAL RATING D REFERENCE BAF1-3RNX1 Roller arm, adjustable Left-hand Right-hand With boot seal Pretravel max. (PT): ACTUATOR POSITION Right Left 7,79 N (1.75 lb) 2,39 mm (0.094 in) 5,56 mm (0.219 in) 82,6 (3.25) 101,6 (4.00) 15 CONTACT SPDT SPDT ELECTRICAL RATING D D REFERENCE BAF1-2RN18-RH BAF1-2RN18-LH With boot seals on roller arm and plunger Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Operating position (OP): ACTUATOR POSITION Right Left 42 www.honeywell.com/sensing CONTACT Maintained SPDT Maintained SPDT 6,67 N (1.5 lb) 5,56 mm (0.219 in) 6,35 mm (0.25 in) 60,71 mm (2.390 in) ELECTRICAL RATING D D REFERENCE BAF1-3RN2X-RH BAF1-3RN2X-LH PRECISION LIMIT SWITCHES Wobble, coil spring 32,5 (1.28) O 7,1 (0.28) 158,5 (6.24) 1/2-14 NPT Threads O 6,9 (3) (0.27) 27,4 (1.08) 20,6 (0.81) 41,4 (1.63) 27,4 (1.08) 82,6 (3.25) 101,6 (4.00) With boot seals on wobble stick and plunger Pretravel max. (PT): ACTUATOR POSITION Right 15 CONTACT Maintained SPDT ELECTRICAL RATING D REFERENCE BAF1-3CN18X1 www.honeywell.com/sensing 43 HEAVY DUTY LIMIT SWITCHES HDLS Series Heavy Duty Limit Switches The HDLS Series Heavy Duty Limit Switches offer a wide choice of mounting and actuator options. Housed in a rugged, die-cast zinc body which is epoxy coated for protection, they are perfectly suited to special applications in harsh duty environments where conventional limit switches may not be used. Versatile and full featured, they are designed for long life. Listings referenced in this section are mainly standard. Low temperature and fluorocarbon (FC, high temperature) construction is available in all forms of HDLS limit switches. For temperature ranges see table opposite. Also available are factory sealed, pre-wired switches. Low temperature switches have fluorosilicone diaphragm, shaft seals and external boot seal (where applicable) plus a low temperature lubricant. If prewired with cable, temperature limits are -10 C (14 F) flex and -30 C (22 F) no flex. To order a low temperature version insert the additional letters Y and B as in the following example: LSA1A - standard side rotary plug-in switch LSYAB1A - low temperature version. Completely fluorocarbon (FC) sealed, high temperature, chemical resistance switches have a full FC body gasket covering the switch cavity. Rotary types have an extra FC seal on the operating shaft, while plunger versions have FC boot seals. They are for use in applications where the environment includes fire-resistant synthetic fluids. The additional FC seals also promote longer operating life for rotary actuacted HDLS switches in applications where the temperatures are normally -12 C to 121 C (10 F to 250 F). If prewired with cable, temperature limits are 105 C (221 F) dry and 60 C (140 F) wet. To order a fluorocarbon (FC) sealed switch insert the additional letters Y and C as in the following example: LSA1A - standard side rotary plug-in switch LSYAC1A - completely FC sealed version. Actuators Factory sealed, pre-wired limit switches have the entry area completely sealed and are available with 6 ft (1,83 m), STOOW-A cable or 4, 5 or 9-pin connectors. NEMA ratings are, for cable version 1, 4, 6, 6P, 12, for connector version 1, 4, 6, 6P, 12, 13. To order a factory sealed switch add the appropriate letter: Circuitry Cable 1/2 in Connector (available with 1/2 in conduit tap only) SPDT C A (4 pin mini) B (5 pin mini) DD (4 pin micro) DPDT Levers: Levers for side rotary types are ordered separately (see pages 69-71 for details) M (3/4 in only) R (9 pin) Example: LSA1AC - LSA1A with 6 ft of 5 conductor STOOW-A cable LSJ2BM-7N - LSJ2B-7N with 6 ft of 9 conductor STOOW-A cable LSA1AB - LSA1A with 5 pin receptable LSA1ADD - 4 pin micro-change connector Electrical ratings 10 amps continuous carry. Circuits on any one pole must be the same polarity. ac Volts Pilot duty: 600 Vac, 720 VA A SPDT NEMA A600 B DPDT NEMA B600 C SPDT/DPDT Amps at 0.35 Power Factor Vac Make 120 60 240 30 480 15 600 12 120 30 240 15 480 7.5 600 6 250 Vac or 60 Vdc, 0.050 amp max. Break 6 3 1.5 1.2 3 1.5 0.75 0.60 dc Volts Pilot duty: 240 Vdc, 30 watts A SPDT B DPDT C SPDT/DPDT 44 Make and Break Amps Vdc Inductive 120 0.25 240 0.15 120 0.25 240 0.15 250 Vac or 60 Vdc, 0.050 amp max. www.honeywell.com/sensing Resistive 0.8 0.4 0.8 0.4 HEAVY DUTY LIMIT SWITCHES Operating temperatures Environmental seal performance www.honeywell.com/sensing 45 HEAVY DUTY LIMIT SWITCHES HDLS Series Side rotary actuated switches Levers: Levers for side rotary types are ordered separately (see pages 69-71 for details) Approvals: Operating force (Newton meters, N m/in lb): Conduit: Contacts: Switching options: SPDT NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 UL, CSA, CE LSA, LSL, LSM, LSM, LSP, LSU 0,45 N m max. 4 in lb max. LSH, LSR 0,19 N m max. 1.7 in lb max 1/2 in - 14 NPT Electrical ratings A, B Silver Electrical rating C Gold Snap action contacts DPDT Side rotary, momentary action The momentary action listings shown are factory assembled with the head adjusted for both clockwise (CW) and counterclockwise (CCW) operation. The shaft of side rotary heads face the front (label side of switch). Actuation direction A simple field adjustment converts switch to accept actuation from one or both directions. For ready reference, adjustment instructions are cast into the internal lid of side rotary heads. SPDT Double Break DPDT Double Break Head orientation The head may be orientated and locked in any of four 90 positions. Momentary action switches can be factory assembled for operation in one direction only and/ or with the shaft facing the rear or either side. Contact Honeywell for more information. 46 www.honeywell.com/sensing HEAVY DUTY LIMIT SWITCHES OPTIONS Low differential, low torque Standard Pretravel: Differential travel: SPDT DPDT Overtravel: 15 max. 5 max. 7 max. 60 min. ELECTRICAL RATING REFERENCE A LSA1A C LSA1E B LSA2B B LSA6B C LSA6S A LS4A1A B LS4A2B Non plug in CONTACT CONDUIT SPDT DPDT 3/4 in SPDT 20 mm Pretravel: Differential travel: SPDT DPDT Overtravel: 9 max. 3 max. 4 max. 66 min. Plug in Plug in CONTACT CONDUIT SPDT SPDT DPDT 3/4 in DPDT DPDT SPDT 20 mm DPDT 20 mm Side rotary, additional circuitry/ action ELECTRICAL RATING REFERENCE A LSA3K B LSA4L A LS4A3K CONTACT CONDUIT SPDT SPDT DPDT 3/4 in DPDT DPDT ELECTRICAL RATING REFERENCE A LSH1A C LSH1E B LSH2B B LSH6B C LSH6S Non plug in CONTACT CONDUIT SPDT DPDT 3/4 in The following listings, sequential, centre neutral and maintained switches, are assembled with the operating shaft facing front. The user can position and lock the head with the shaft to rear or either side. They can also be factory assembled with the shaft to rear or either side. Contact Honeywell for more information. OPTIONS Sequential One pole operates before the other in each direction, with 10 lever travel between operations. Pretravel: ELECTRICAL RATING REFERENCE A LSH3K B LSH4L Differential travel: Overtravel: Switching options: 1st pole 15 max. 2nd pole additional 10 max. Each pole 5 max. 48 min. 5 Pretravel Pretravel: Differential travel: Low differential travel Pretravel: Differential travel: SPDT DPDT Overtravel: 9 max. 3 max. 4 max. 66 min. Plug in CONTACT SPDT SPDT DPDT DPDT DPDT ELECTRICAL RATING REFERENCE A LSP1A C LSP1E B LSP2B B LSP6B C LSP6S 5 max. 3 max. 4 max. 70 min. Plug in CONTACT CONDUIT SPDT SPDT DPDT 3/4 in DPDT DPDT (2) SPDT Double Bread with 10 between operation ELECTRICAL RATING REFERENCE A LSU1A C LSU1E B LSU2B B LSU6B C LSU6S Plug in CONTACT CONDUIT DPDT 3/4 in DPDT ELECTRICAL RATING REFERENCE B LSL2C B LSL6C Non plug in Non plug in CONTACT CONDUIT SPDT DPDT 3/4 in Non plug in CONTACT CONDUIT SPDT DPDT 3/4 in Overtravel: SPDT DPDT ELECTRICAL RATING REFERENCE A LSU3K B LSU4L ELECTRICAL RATING REFERENCE A LSP3K B LSP4L CONTACT CONDUIT DPDT 3/4 in DPDT ELECTRICAL RATING REFERENCE B LSL4M B LSL7M Centre neutral One pole operates on clockwise rotation, the other on counterclockwise rotation. Low torque Pretravel: Differential travel: Overtravel: SPDT DPDT Pretravel: Differential travel: Overtravel: Switching options: 15 max. 5 max. 7 max. 60 min. 18 max. 10 max. 57 min. Plug in CONTACT CONDUIT SPDT SPDT DPDT 3/4 in DPDT DPDT ELECTRICAL RATING REFERENCE A LSR1A C LSR1E B LSR2B B LSR6B C LSR6S SPDT Double Break each direction Plug in Non plug in CONTACT CONDUIT SPDT DPDT 3/4 in CONTACT CONDUIT DPDT 3/4 in SPDT 20 mm DPDT ELECTRICAL RATING REFERENCE A LSR3K B LSR4L ELECTRICAL RATING REFERENCE B LSM2D B LS4M2D B LSM6D Non plug in CONTACT CONDUIT DPDT 3/4 in DPDT www.honeywell.com/sensing ELECTRICAL RATING REFERENCE B LSM4N B LSM7N 47 HEAVY DUTY LIMIT SWITCHES HDLS Series Side rotary actuated switches (continued) Plunger actuated switches Maintained contact, 2 position Operation is maintained on counterclockwise rotation, reset on clockwise rotation and vice versa. Pretravel: Differential travel: Overtravel: Switching options: SPDT 65 max. 40 max. 20 min. DPDT HDLS plunger actuated switches are available with either top or side facing plungers for application flexibility. Switches with adjustable plungers simplify installation. They have a hex setscrew and locknut on the plunger, providing an adjustment range of 0.25 in (6.35 mm). Assembled conditions The listing shown are factory assembled with side plungers facing front (label side of switch); rollers on side plungers are in horizontal position. Rollers on top plunger switches are parallel to mounting surface. Other options are available. Contact Honeywell for more information. Approvals: SPDT Double Break Maintained DPDT Double Break Maintained NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 UL, CSA, CE 1/2 in - 14 NPT Conduit: Contacts: Electrical ratings A, B Electrical rating C Switching options: SPDT Silver Gold Snap action contacts DPDT Plug in CONTACT SPDT DPDT Operating point: 55,9 mm 1,02 2,20 in 0.040 Plug in CONTACT SPDT SPDT DPDT DPDT ELECTRICAL RATING REFERENCE A LSD1A C LSD1E B LSD6B C LSD6S Non plug in ELECTRICAL RATING REFERENCE A LSN1A B LSN6B Non plug in CONTACT SPDT DPDT Top roller plunger CONTACT SPDT DPDT ELECTRICAL RATING REFERENCE A LSD3K B LSD7L DPDT Double Break SPDT Double Break ELECTRICAL RATING REFERENCE A LSN3K B LSN7L Adjustable plunger Top plungers, momentary action Pretravel: Differential travel: SPDT DPDT Overtravel: Operating force: 1,78 mm (0.07 in) max. 0,38 mm (0.015 in) max. 0,51 mm (0.02 in) max. 4,83 mm (0.19 in) min. 17,8 N m (4 lb) max. OPTIONS Operating point: Top pin plunger 53,0 mm to 59,3 mm 2.085 in to 2.335 in Plug in CONTACT SPDT SPDT DPDT DPDT ELECTRICAL RATING REFERENCE A LSV1A C LSV1E B LSV6B C LSV6S Non plug in Operating point: 45,8 mm 0,76 1.805 in 0.030 Plug in CONTACT SPDT SPDT DPDT DPDT ELECTRICAL RATING REFERENCE A LSC1A C LSC1E B LSC6B C LSC6S Non plug in CONTACT SPDT DPDT 48 ELECTRICAL RATING REFERENCE A LSC3K B LSC7L www.honeywell.com/sensing CONTACT SPDT DPDT ELECTRICAL RATING REFERENCE A LSV3K B LSV7L HEAVY DUTY LIMIT SWITCHES Side plungers, momentary action Pretravel: Differential travel: SPDT DPDT Overtravel: Operating force: Adjustable side roller plunger Side plunger, maintained circuitry Operating point: LSG contact transfer is maintained after either plunger is operated. Operation of other plunger resets switch. 2,54 mm (0.100 in) max. 0,64 mm (0.025 in) max. 0,89 mm (0.035 in) max. 4,83 mm (0.19 in) min. 26,7 N m (6 lb) max. OPTIONS Side pin plunger 41,0 mm to 47,4 mm 1.615 in to 1.865 in Plug in CONTACT SPDT SPDT DPDT DPDT Operating point: 33 mm 0,76 1.300 in 0.030 Plug in CONTACT SPDT SPDT DPDT DPDT ELECTRICAL RATING REFERENCE A LSE1A C LSE1E B LSE6B C LSE6S ELECTRICAL RATING REFERENCE A LSW1A C LSW1E B LSW6B C LSW6S Non plug in CONTACT SPDT DPDT ELECTRICAL RATING REFERENCE A LSW3K B LSW7L Pretravel: Differential travel: SPDT DPDT Overtravel: Operating force: Operating point: Switching options: SPDT 4,32 mm (0.170 in) max. 2,29 mm (0.090 in) max. 2,29 mm (0.090 in) max. 2,00 mm (0.0.80 in) max. 44,5 N m (10 lb) min. 37,6 0,76 mm 1.48 0.030 in DPDT Non plug in CONTACT SPDT DPDT ELECTRICAL RATING REFERENCE A LSE3K B LSE7L Plug in CONTACT SPDT SPDT DPDT DPDT Side roller plunger ELECTRICAL RATING REFERENCE A LSG1A C LSG1E B LSG6B C LSG6S Non plug in CONTACT SPDT DPDT Operating point: ELECTRICAL RATING REFERENCE A LSG3K B LSG7L 44,1 mm 1,02 1.735 in 0.040 Plug in CONTACT SPDT SPDT DPDT DPDT ELECTRICAL RATING REFERENCE A LSF1A C LSF1E B LSF6B C LSF6S Non plug in CONTACT SPDT DPDT ELECTRICAL RATING REFERENCE A LSF3K B LSF7L www.honeywell.com/sensing 49 HEAVY DUTY LIMIT SWITCHES HDLS Series Wobble actuated switches Momentary action wobble actuated switches have flexible levers which may be operated with any movement, except direct pull. Approvals: Spring wire Cat whisker NEMA 1, 3, 4, 4X, 6, 6P, 12, 13 UL, CSA, CE 1/2 in - 14 NPT Conduit: Contacts: Electrical ratings A, B Switching options: SPDT Silver Snap action contacts DPDT Pretravel (approx) (Radius): Operating force: SPDT Double Break DPDT Double Break Plastic rod Pretravel (approx) (Radius): 51,0 mm (2.0 in) Operating force: 1,39 N (5.0 oz) max. Plug in CONTACT SPDT DPDT OPTIONS 102,0 mm (4.0 in) 1,39 g (5 oz) max. ELECTRICAL RATING REFERENCE A LSJ1A-7M B LSJ6B-7M CONTACT SPDT DPDT Non plug in CONTACT SPDT DPDT Plug in ELECTRICAL RATING REFERENCE A LSJ3K-7M B LSJ7L-7M ELECTRICAL RATING A B REFERENCE LSK1A-8A LSK6B-8A ELECTRICAL RATING A B REFERENCE LSK3K-8A LSK7L-8A Non plug in CONTACT SPDT DPDT Cable Coil spring Pretravel (approx) (Radius): 25,4 mm (1.0 in) Operating force: 2,78 g (10 oz) max. Plug in CONTACT SPDT DPDT ELECTRICAL RATING REFERENCE A LSJ1A-7A B LSJ6B-7A Pretravel (approx) (Radius): 38,0 mm (1.5 in) Operating force: 1,95 N (7.0 oz) max. Non plug in CONTACT SPDT DPDT ELECTRICAL RATING REFERENCE A LSJ3K-7A B LSJ7L-7A Pretravel (approx) (Radius): 51,0 mm (2.0 in) Operating force: 1,95 N (7.0 oz) max. Plug in CONTACT SPDT DPDT ELECTRICAL RATING A B REFERENCE LSJ1A-7N LSJ6B-7N CONTACT SPDT DPDT Non plug in CONTACT SPDT DPDT Plug in ELECTRICAL RATING A B REFERENCE LSJ3K-7N LSJ7L-7N Non plug in CONTACT SPDT DPDT 50 www.honeywell.com/sensing ELECTRICAL RATING REFERENCE A LSK1A-8C B LSK6B-8C ELECTRICAL RATING REFERENCE A LSK3K-8C B LSK7L-8C HEAVY DUTY LIMIT SWITCHES Fully potted HDLS Fully potted HDLS are designed to meet the demanding requirements of NEMA 1, 3, 4, 6, 6P and 13 for wet applications where the integrity of the conduit seal must be assured. These switches are the same as the standard HDLS non plug in limit switch except that the conduit entrance is factory sealed to simplify installation and ensure integrity of the conduit seal. They are epoxy filled and supplied with six feet of 5 or 9 conductor 16 gauge STO cable. Fully potted HDLS are built with all Fluorocarbon seals. Sealing exceeds Nema 6P. Low temperature versions are available, see page 4 for temperature range and how to order. 41,1 1.62 14,7 0.58 Operating temperature: Cable versions -12 C to 105 C 10 F to 221 F Connector versions -12 C to 121 C 10 F to 250 F Cable length: 3,658 m (12 ft) Contacts: Electrical ratings A, B Silver Switching options: Snap action contacts SPDT DPDT Side rotary actuated switches Levers: Levers for side rotary types are ordered separately (see pages 69-71 for details) OPTIONS Standard Pretravel: Differential travel: Overtravel: Operating force: 25,4 1.00 36,6 1.44 59,4 2.34 CONTACT SPDT DPDT SPDT DPDT 70,4 2.77 Wiring diagrams: 5,2 0.20 O Mtg holes (2) NEMA 1, 4, 6, 6P, 12, 13 NEMA 1, 4, 6, 6P, 12 UL, CSA, CE 39,6 1.56 19,0 0.75 106,7 4.20 Approvals: Connector Cable 29,4 1.16 10-32 UNF tapped from rear only (2) Single-Pole ELECTRICAL RATING REFERENCE A LSYAC3KP-FP B LSYAC4LX-FP A LSYAC3KQ-FP B LSYAC7LR-FP Numbers = Connectors Colours = Cables Double-Pole Low differential travel Pretravel: Differential travel: 62,0 2.44 Overtravel: Operating force: Mtg pads 7,32 0.29 TERMINATION Cable Cable 5-pin Connector 9-pin Connector 15 max. 5 max. 7 max. 60 min. 0,45 N m (4 in lb) max. SPDT DPDT Actuators 74,9 2.95 CONTACT SPDT DPDT SPDT DPDT TERMINATION Cable Cable 5-pin Connector 9-pin Connector 9 max. 3 max. 4 max. 66 min. 0,45 N m (4 in lb) max. SPDT DPDT ELECTRICAL RATING REFERENCE A LSYPC3KP-FP B LSYPC4LX-FP A LSYPC3KQ-FP B LSYPC7LR-FP 5 Pretravel 1/2-14 NPT 20,3 0.80 Pretravel: Differential travel: Overtravel: Operating force: 39,0 1.54 44,4 1.75 5 max. 3 max. 70 min. 0,45 N m (4 in lb) max. SPDT CONTACT TERMINATION ELECTRICAL RATING REFERENCE SPDT Cable A LSYUC3KP-FP SPDT 5-pin Connector A LSYUC3KQ-FP For low temperature versions substitute "Y_B" for "Y_C" www.honeywell.com/sensing 51 HEAVY DUTY LIMIT SWITCHES Fully potted HDLS (continued) Side rotary actuated switches Sequential Pretravel: Differential travel: Overtravel: Operating force: Switching options: 1st pole 15 max. 2nd pole additional 10 max. Each pole 5 max. 48 max. 0,45 N m (4 in lb) max. DPDT Plunger actuated switches OPTIONS Top plungers Pretravel: Differential travel: SPDT DPDT Overtravel: Operating force: 1,78 mm (0.07 in) max. 0,38 mm (0.015 in) max. 0,51 mm (0.02 in) max. 4,83 mm (0.19 in) min. 17,8 N m (4 lb) max. Top pin plunger CONTACT SPDT DPDT SPDT DPDT TERMINATION Cable Cable 5-pin Connector 9-pin Connector ELECTRICAL RATING REFERENCE A LSYCC3KP-FP B LSYCC4LX-FP A LSYCC3KQ-FP B LSYCC7LR-FP (2) SPDT Double Break with 10 between operation CONTACT TERMINATION ELECTRICAL RATING REFERENCE DPDT Cable B LSYLC4MX-FP DPDT 9-pin Connector B LSYLC7MR-FP CONTACT SPDT DPDT SPDT DPDT Centre neutral Pretravel: Differential travel: Overtravel: Operating force: Switching options: Top roller plunger 18 max. 10 max. 57 min. 0,45 N m (4 in lb) max. DPDT TERMINATION Cable Cable 5-pin Connector 9-pin Connector ELECTRICAL RATING REFERENCE A LSYDC3KP-FP B LSYDC4LX-FP A LSYDC3KQ-FP B LSYDC7LR-FP Side plungers Pretravel: Differential travel: SPDT DPDT Overtravel: Operating force: 2,54 mm (0.100 in) max. 0,38 mm (0.015 in) max. 0,51 mm (0.02 in) max. 4,83 mm (0.19 in) min. 26,7 N m (6 lb) max. Side pin plunger SPDT Double Break each direction CONTACT TERMINATION ELECTRICAL RATING REFERENCE DPDT Cable B LSYMC4NX-FP DPDT 9-pin Connector B LSYMC7NR-FP CONTACT SPDT DPDT SPDT DPDT TERMINATION Cable Cable 5-pin Connector 9-pin Connector ELECTRICAL RATING REFERENCE A LSYEC3KP-FP B LSYEC4LX-FP A LSYEC3KQ-FP B LSYEC7LR-FP For low temperature versions substitute "Y_B" for "Y_C" 52 www.honeywell.com/sensing Wobble actuated switches Actuator codes **: 7A 7M 8A 7N 8C CONTACT TERMINATION SPDT DPDT SPDT DPDT Cable Cable 5-pin Connector 9-pin Connector Delrin rod Spring wire Cat whisker Cable Coil spring ELECTRICAL RATING A B A B Head style* J J K J K REFERENCE LSY*C3KP-**FP LSY*C4LX-**FP LSY*C3KQ-**FP LSY*C7LR-**FP HEAVY DUTY LIMIT SWITCHES Stainless steel HDLS Side rotary actuated switches Plunger actuated switches OPTIONS HDLS stainless steel switches are designed for use in highly corrosive environments such as petrochemical plants, food processing plants, shipboard and dockside locations. The type 316 cast stainless steel body is designed to minimise crevices where food particles could become trapped. The actuator, operating head and screws are also stainless steel. All seals are Fluorocarbon to provide excellent chemical resistance and to withstand operating temperatures up to 121 C (250 F) and pressurised steam cleaning. Top roller plunger Approvals: NEMA 1, 3, 3R, 4, 4X, 6, 6P, 12, 13 UL, CSA, CE Operating temperature: -12 C to 121 C 10 F to 250 F Contacts: Electrical ratings A, B Silver Pretravel: Differential travel: Overtravel: Operating point: Levers: Levers for side rotary types are ordered separately (see pages 69-71 for details) CONTACT SPDT DPDT Actuators 1,78 mm (0.07 in) max. 0,38 mm (0.015 in) max. 4,83 mm (019 in) min. 55,9 mm 1,02 2.20 in 0.04 ELECTRICAL RATING A B REFERENCE LS2D4K LS2D4L Side pin plunger 33,0 1.30 Operating point 19,0 0.75 Standard Pretravel: Differential travel: SPDT DPDT Overtravel: CONTACT SPDT DPDT 9,4 0.37 Pretravel: Differential travel: Overtravel: Operating point: OPTIONS ELECTRICAL RATING A B 15 max. 5 max. 7 max. 60 min CONTACT SPDT DPDT ELECTRICAL RATING A LS2E4K B LS2E4L 47,7 1.88 39,6 1.56 Overtravel: CONTACT SPDT DPDT ELECTRICAL RATING A B 9 max. 3 max. 4 max. 60 min. REFERENCE LS2H4K LS2H4L Pretravel: Differential travel: Overtravel: CONTACT DPDT ELECTRICAL RATING B 19,1 0.75 Pretravel: Differential travel: Overtravel: Operating point: CONTACT SPDT DPDT Centre neutral DPDT REFERENCE 44,2 1.74 Operating point 14,7 0.58 Low Torque SPDT DPDT 2,54 mm (1.00 in) max. 0,64 mm (0.025 in) max. 4,83 mm (0.19 in) min. 33 mm 0,76 1.3 in 0.03 Side roller plunger REFERENCE LS2A4K LS2A4L 4,8 0.19 Pretravel: Differential travel: 21,6 0.85 31,5 1.24 21,6 0.85 20,3 0.80 2,54 mm (1.00 in) max. 0,64 mm (0.025 in) max. 4,83 mm (0.19 in) min. 44,1 mm 1,02 1.73 in 0.04 ELECTRICAL RATING A B REFERENCE LS2F4K LS2F4L 18 max 10 max. 57 min. REFERENCE LS2M4N www.honeywell.com/sensing 53 Blank page 54 www.honeywell.com/sensing EXPLOSION PROOF SWITCHES Explosion proof switches Honeywell explosion proof switches are designed specifically for use in hazardous locations. To comply with explosion proof requirements, the flame path within the housing is designed to contain and cool the escaping hot gases that otherwise could cause an explosion outside the switch. Switches are available with UL/CSA for North America. See information below and product pages for details. In Europe, the usage is governed under the European Directive on Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (94/9/EC) commonly referred to as the ATEX Directive. The BX, CX and GXE product families comply to the following ATEX Directive: EExd IIC T6 Category II 2 GD The 14CE100 product family complies to the following ATEX Directive: EExd IIC T6 Category II 2 G NEMA TYPE 7, CLASS I FLAMMABLE GASES OR VAPORS Type 7 enclosures are for use indoors in locations classified as Class I, Groups B, C, or D by the National Electrical Code. Group B -- (only switches so noted in the order guides include this listing). Atmospheres containing hydrogen or manufactured gas. Group C -- atmospheres containing diethyl ether, ethylene, or cyclopropane. Group D -- Atmospheres containing gasoline, hexane, butane, naptha, propane, acetone, toluene or isoprene. Division 1 Locations in which hazardous agents are present under normal operating conditions. Division 2 Locations in which hazardous agents may be present only in case of accidental rupture or breakdown. All Honeywell listings covered in Division 1 are also covered in the same groups in Division 2. NEMA TYPE 9, CLASS II COMBUSTIBLE DUSTS Type 9 enclosures are for use in indoor locations classified as Class II, Groups E, F or G, as defined in the National Electrical Code. Group E -- Atmospheres containing metal dust. Group F -- Atmospheres containing carbon black, coal dust or coke dust. Group G -- Atmospheres containing flour, starch or grain dust. ATEX EExd EExd Flameproof enclosure II c T6 Category II 2 Places with potentially explosive atmospheres, other than mines susceptible to fire damp Atmosphere may contain gases from groups A, B or C from table in EN50014, Annex A Maximum surface temperature of 85 C (185 F) Areas in which an explosion proof atmosphere is likely to occur www.honeywell.com/sensing G Gas could be present D Dust could be present 55 EXPLOSION PROOF SWITCHES 14CE100 Series Miniature Enclosed, Explosion Proof Switches The 14CE100 Series has been designed for use in explosive environments. It is approved to meet the requirements of the Low Voltage directive and is CE marked. The prewired construction allows for ease of installation where space is at a premium and external operating conditions can be difficult. Mechanical life: Sealing: 10 million IP65, NEMA 1, 3 IP67 , NEMA 1, 3, 4 12, 13 0 C to 70 C (32 F to 158 F) CE, PTB 98 ATEX 1064 X EExd IIC T6 Category II 2 G AC14 D300 DC13 R300 11,8 N max. 1,8 mm (0.71 in) max. 3,0 mm (0.118 in) min. 0,1mm (0.004 in) max. Standard Silver -*G Gold Harmonised CENELEC 4 x 0,75 mm2 cable Standard Boot sealed Operating temperature: Approvals: Operating force (OF): Pretravel (PT): Overtravel (OT): Differential travel (DT): Contacts: Connection: Switching options: SPDT Single Pole, Double Throw Snap action contacts (1NC/1NO) Actuators S.P.D.T BROWN 2 GREEN/YELLOW BLUE 1 3 BLACK Top pin plunger 40,0 Max. 1,57 25,0 1.00 M4 ground screw 15,7 OP 0.62 Top roller plunger, parallel 16,0 Max. 0.63 1,8 PT 0.07 M4 ground screw Top roller plunger, perpendicular 40,0 Max. 1,57 25,0 1.00 M4 ground screw O 10,0 (0.39) Stainless steel plunger (2) O 5,1 (0.20) Mounting holes 49,0 Max. 1.93 31,4 1.24 1,8 PT 0.07 O 12,0 (0.47) x 5,0 (0.20) Hardened steel roller REFERENCE 14CE101-1 14CE101-2 14CE101-3 14CE101-4 14CE101-5 14CE101-6 14CE101-10 Boot sealed 1,80 Max. (0.07) PT 72,0 2,83 31,4 1.24 49,0 Max. 1.93 CABLE LENGTH 1 m (3.3 ft) 3 m (9.9 ft) 3 m (9.9 ft) Gold contacts 5 m (16.5 ft) 6 m (19.8 ft) 6 m (19.8 ft) Gold contacts 8 m (26.4 ft) 12 m (39.6 ft) 15 m (49.5 ft) 31,4 1.24 49,0 Max. 1.93 7,6 0.30 "L" REFERENCE 14CE102-1 14CE102-3 14CE102-3G 14CE102-5 14CE102-6 14CE102-6G 14CE102-8 14CE102-12 14CE102-15 O 7,1 (0.28) Stainless steel plunger Neoprene boot seal 56 14,0 0.55 72,0 2,83 7,6 0.30 24,9 (0.98) OP CABLE LENGTH 1 m (3.3 ft) 6 m (19.8 ft) 10 m (33.0 ft) (2) O 5,1 (0.20) Mounting holes 28,5 OP 1.11 "L" CABLE LENGTH 1 m (3.3 ft) 2 m (6.6 ft) 3 m (9.9 ft) 4 m (13.2 ft) 5 m (16.5 ft) 6 m (19.8 ft) 10 m (33.0 ft) 1,8 PT 0.07 (2) O 5,1 (0.20) Mounting holes 7,6 0.30 "L" 16,0 Max. 0.63 16,0 Max. 0.63 28,5 OP 1.11 59,0 2.32 40,0 Max. 1,57 25,0 1.00 REFERENCE 14CE118-1 14CE118-6 14CE118-10 www.honeywell.com/sensing CABLE LENGTH 1 m (3.3 ft) 3 m (9.9 ft) REFERENCE 14CE103-1 14CE103-3 EXPLOSION PROOF SWITCHES GXE Series Explosion Proof Limit Switches The GXE Series explosion proof limit switches are designed specifically for use in hazardous applications. The GXE enclosure is fully potted and has sealing protection of IP66/67 as per IEC/EN 60529. The entire GXE Series complies with the European Directive on Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (94/9/EC) commonly referred to as the ATEX Directive. Mechanical life: Sealing: Operating temperature: Approvals: 2 million IP66/67, EN 60529 -20 C to 75 C (-4 F to 167 F) CE, EN 50014, EN 50018, EN 50281-1-1 KEMA 00 ATEX 2103 X EExd IIC T6 Category II 2 GD AC15 DC13 Silver 5 metre, HO5VV-F, 3 x 0,75 mm2 cable Contacts: Connection: Switching options: SPDT Single Pole, Double Throw Snap action contacts (1NC/1NO) BLUE BLACK BROWN Actuators OPTIONS GXE Series Side rotary roller lever Top roller plunger, parallel Overtravel min. (OT): 6,0 mm (0.0.236 in) Differential travel max. (DT): 0,5mm (0.020 in) Operating position max. (PT): 2,0 mm (0.079 in) Overtravel min. (OT): 6,0 mm (0.0.236 in) Differential travel max. (DT): 8 Operating position max. (PT): 26 REFERENCE GXE51C REFERENCE GXE51A1B Operating force max. (OF): 16 N (3.6 lb) Top pin plunger Overtravel min. (OT): 6,0 mm (0.0.236 in) Differential travel max. (DT): 0,5mm (0.020 in) Operating position max. (PT): 2,0 mm (0.079 in) REFERENCE GXE51B www.honeywell.com/sensing 57 EXPLOSION PROOF SWITCHES The EX Series features the smallest UL listed housings available for use in hazardous locations. Flame paths within the housing cool exploding gases below the kindling temperature before they reach the explosive gases surrounding the housing. EX Series Standard Explosion Proof Switches Options available include single or double conduit connection. These switches are not sealed against liquids and should not be used where there will be liquid splash. If a weather sealed explosion proof switch is required please select from the CX or LSX/BX series. Actuators Sealing: Operating temperature: Approvals: Conduit: Contacts: Electrical ratings: A NEMA 1, 7 (Class I, Division I, Groups C, D) 9, (Class II, Division I, Groups E, F, G) Standard -40 C to 71 C (-40 F to 160 F) High 100 hr @ 400 F UL, CSA 1/2 in - 14NPT Silver UL/CSA Rating: 15 A, 125, 250 or 480 Vac; /8 Hp, 125 Vac; 1/4 Hp, 250 Vac; 1/2 A, 125 Vdc; 1/4 A, 250 Vdc. 1 B UL/CSA Rating: 20 A, 125, 250 or 480 Vac; 10 A, 125 Vac "L"; 1 Hp, 125 Vac; 2 Hp, 250 Vac; 1/2 A, 125 Vdc; 1/4 A, 250 Vdc. C UL/CSA Rating: D UL/CSA Rating: 10 A, 125 or 250 Vac; 0.3 A, 125 Vdc; 0.15 A, 250 Vdc . 10 A, 125, 250 or 480 Vac; 1/2 A, 125 Vdc; 1/4 A, 250 Vdc. E UL Rating: Switching options: SPDT Single Pole, Double Throw Snap action contacts (1NC/1NO) 1 A, 125 Vac. DPDT Double Pole, Double Throw Snap action contacts (2NC/2NO) Side rotary actuated switches OPTIONS No lever Note: Levers are ordered separately (see pages 69-71 for details) Operating force max. (OF): Electrical rating A Electrical rating B Pretravel max. (PT): Overtravel max. (OT): Electrical rating A Electrical rating B Differential travel max. (DT): Electrical rating A Electrical rating B ACTUATION CW CCW CW 58 www.honeywell.com/sensing CONTACT SPDT SPDT SPDT 0,22 N m (31.25 in oz) 3,34 N to 8,90 N (0.75 lb to 2.0 lb) 5,56 mm (0.219 in) 8 90 25 0,18 mm (0.007 in) 0.25 0,3 mm (0.012 in) 4 ELECTRICAL RATING A A B REFERENCE EX-AR20 EX-AR230 EXA-AR20 EXPLOSION PROOF SWITCHES Roller lever DPDT, Preleaded with 0,91 m (3 ft) leadwire Operating force max. (OF): Clockwise (CW) Counter clockwise (CCW) Pretravel max. (PT): Overtravel max. (OT): Differential travel max. (DT): Sealing: ACTUATION CW CCW Roller material: Operating force max. (OF): Electrical rating A Clockwise (CW) Counter clockwise (CCW) Electrical rating B Pretravel max. (PT): Electrical rating A, B Clockwise (CW) Counter clockwise (CCW) Overtravel max. (OT): Electrical rating A Clockwise (CW) Counter clockwise (CCW) Electrical rating B Differential travel max. (DT): Electrical rating A Electrical rating B ACTUATION CW CCW CW/Class 1 Group B CCW/Class 1 Group B CW/High temperature CW CW/No mounting bracket CW/Nylon roller CW/No mounting bracket CONTACT SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPDT CONTACT DPDT DPDT 2,22 N to 6,67 N (0.5 lb to 1.5 lb) 12,2 N (2.75 lb) 6,35 mm (0.250 in) 25 2,77 mm (0.109 in) 4 NEMA Class 1 Group B ELECTRICAL RATING C C REFERENCE EXD-AR-3 EXD-AR30-3 Bronze Hermetically sealed 2,22 N to 5,56 N (0.5 lb to 1.25 lb) 11,1 N (2.5 lb) 3,34 N to 8,90 N (0.75 lb to 2.0 lb) 5,56 mm (0.219 in) 8 1,65 mm (0.065 in) 3.5 90 25 25 Operating force max. (OF): Clockwise (CW) Counter clockwise (CCW) Pretravel max. (PT): Clockwise (CW) Counter clockwise (CCW) Overtravel max. (OT): Differential travel max. (DT): Sealing: ACTUATION CW/3,2 m (10.5 ft) leadwire CCW/0,91 m (3 ft) leadwire CW/0,91 m (3 ft) leadwire CONTACT SPDT SPDT SPDT 2,22 N to 6,67 N (0.5 lb to 1.5 lb) 11,1 N (2.5 lb) 5,56 mm (0.219 in) 8 1,65 N (0.065 in) 3.5 25 0,64 mm (0.025 in) NEMA Class 1 Group B ELECTRICAL RATING E E E REFERENCE EXH-AR3 EXH-AR33 EXH-AR7 0,18 mm (0.007 in) 0.25 0,3 mm (0.012 in) 4 ELECTRICAL RATING A A A A A B B A A REFERENCE EX-AR EX-AR30 EX-AR800 EX-AR830 EX-AR400 EXA-AR EXA-AR62 EX-AR182 EX-AR141 2 Conduit openings CW or CCW actuation, no return spring, low operating force Operating force max. (OF): ACTUATION CW/CCW/No mounting bracket CONTACT SPDT 0,56 N (2 oz) ELECTRICAL RATING A REFERENCE EX-AR16 Maintained contact Operating force max. (OF): Pretravel max. (PT): Overtravel max. (OT): ACTUATION CW CONTACT SPDT 3,34 N (0.75 lb) 5,56 mm (0.219 in) 8 90 ELECTRICAL RATING A REFERENCE EX-XR3 Operating force max. (OF): Electrical rating A Electrical rating B Electrical rating C Pretravel max. (PT): Electrical rating A, B Electrical rating C Overtravel max. (OT): Electrical rating A Electrical rating B, C Differential travel max. (DT): Electrical rating A Electrical rating B Electrical rating C CONTACT DPDT SPDT SPDT www.honeywell.com/sensing 2,22 N to 5,56 N (0.5 lb to 1.25 lb) 3,61 N to 8,90 N (0.8 lb to 2 lb) 2,22 N to 6,67 N (0.5 lb to 1.5 lb) 5,56 mm (0.219 in) 8 6,35 mm (0.250 in) 90 25 0,18 mm (0.007 in) 0.25 0,3 mm (0.012 in) 0.5 2,77 mm (0.109 in) 4 ELECTRICAL RATING C B A REFERENCE 4EX1-3 2EX1 1EX1 59 EXPLOSION PROOF SWITCHES EX Series Side rotary actuated switches (continued) Overtravel plunger actuated switches Cross roller lever, rotated 90 Top pin plunger Operating force max. (OF): Pretravel max. (PT): Overtravel max. (OT Differential travel max. (DT): CW CONTACT SPDT 2,22 N to 5,56 N (0.5 lb to 1.25 lb) 5,56 mm (0.219 in) 8 90 0,18 mm (0.007 in) 0.25 ELECTRICAL RATING A REFERENCE EX-CR Rod lever OPTIONS Operating force max. (OF): Electrical rating A, C Electrical rating B Pretravel max. (PT): Electrical rating A Electrical rating B Electrical rating C Overtravel min. (OT): Electrical rating A Electrical rating B Electrical rating C Differential travel max. (DT): Electrical rating A Electrical rating B Electrical rating C No mounting bracket High temperature Low OF Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): CW/No mounting bracket 60 CONTACT SPDT 0,56 N (2 oz) 18 40 ELECTRICAL RATING A REFERENCE EX-AR1613 13,34 N (3.0 lb) 8,90 N (2 lb) 1,98 mm (0.078 in) 1,27 mm (0.050 in) 3,96 mm (0.156 in) 4,78 mm (0.188 in) 3,18 mm (0.125 in) 3,48 mm (0.141 in) 0,10 mm (0.004 in) 0,23 mm (0.009 in) 1,52 mm (0.060 in) CONTACT SPDT SPDT SPDT SPDT ELECTRICAL RATING A A A B REFERENCE EX-Q EX-Q62 EX-Q400 EXA-Q Sealing NEMA Class 1 Group B Preleaded with 0,91 m (3 ft) leadwire www.honeywell.com/sensing CONTACT SPDT DPDT ELECTRICAL RATING A C REFERENCE EX-Q800 EXD-Q-3 EXPLOSION PROOF SWITCHES Boot sealed Operating force max. (OF): Electrical rating D Electrical rating B Pretravel max. (PT): Electrical rating D Electrical rating B Overtravel min. (OT): Electrical rating D Electrical rating B Differential travel max. (DT): Electrical rating D Electrical rating B Class 1 Group B CONTACT SPDT SPDT 13,34 N (3.0 lb) 15,57 N (3.5 lb) 1,98 mm (0.078 in) 2,77 mm (0.109 in) 4,78 mm (0.188 in) 3,18 mm (0.125 in) 0,10 mm (0.004 in) 0,23 mm (0.009 in) ELECTRICAL RATING D B REFERENCE EX-N15 EXA-N ELECTRICAL RATING A REFERENCE EX-AR50 Manually actuated Operating force max. (OF): CONTACT SPDT 11,1 N (2.5 lb) www.honeywell.com/sensing 61 EXPLOSION PROOF SWITCHES CX Series Weather Sealed Explosion Proof Switches CX switches, as are the LSX/BX Series, are built especially for outdoor use in hazardous atmospheres. These enclosures are constructed to withstand the pressure of an internal explosion. O-ring seals make the enclosure weatherproof but are outside of required flame paths so explosion proof requirements are maintained. As factory assembled, all basic switches operate on clockwise and counterclockwise rotation. The actuating mechanism can be field adjusted for CW or CCW operation only. Analog output, 4 mA to 20 mA, is available. Basic switches operate nearly simultaneously in multiple switch devices. Shafts of devices without shaft restoring force can be rotated through 360. Sealing: NEMA UL listed 1, 3, 4, 4X, 6, 6P, 7, 9 and 13 Class I, Div. 1, Groups B (16CX, 24CX, 26CX, and 84CX only), C and D; and Class II, Div. 1, Groups E, F and G Class I, Div. 1, Groups B (16CX, 24CX, 26CX, and 84CX only), C and D; and Class II, Groups E, F and G -25 C to 85 C (-13 F to 185 F) UL, CSA CX-E only ATEX EExd IIC T6 Category II 2 GD Aluminium 80CX Bronze 3/4 in - 14NPT A, C, D Silver F Gold CSA certified Operating temperature: Approvals: Housing: Conduit: Contacts: Actuators Electrical Ratings: A UL/CSA Rating: L96 15 A, 120, 240 or 480 Vac, ind. and res 1 /8 Hp, 120 Vac; 1/4 Hp, 240 Vac 0.5 A, 125 Vdc, 0.25 A, 250 Vdc, res C UL/CSA Rating: L59 10 A, 120 or 240 Vax, ind. and res 0.3 A, 125 Vdc, 0.15 A, 250 Vdc, res D UL/CSA Rating: L22 1 A, 120 Vax, ind. and res F UL/CSA Rating: L22 1 A, 125 Vac G Analog Current Output (4 mA to 20 mA) 12.5 Vdc to 40 Vdc Switching options: SPDT Single Pole, Double Throw Snap action contacts (1NC/1NO) DPDT Double Pole, Double Throw Snap action contacts (2NC/2NO) Analog position sensing specifications (Electrical rating "G") Current output: Voltage compliance range: Maximum load resistance: Current signal output: Span: Null: 62 www.honeywell.com/sensing 4 mA to 20 mA 12.5 Vdc to 40 Vdc RL, Max., -V Supply - 12.5 20 mA 4 mA to 20 mA Adjustable from 15 to 90 of angular rotation 4 mA position may be set at any angular position EXPLOSION PROOF SWITCHES Operating characteristics Basic Switch Type BZ BA DT Pretravel (max.)* 15 15 30 Differential Travel (max.) 10 10 25 Overtravel (min.)* 90 90 75 Operating Torque (max.) 11.1 in lb/1,25 N m * May be modified in field to suit application requirements. HS 30 20 75 Note: Levers are ordered separately (see pages 6971 for details) Notes: Add the letter "A" to listings with side mounting holes tapped 5/16 (8). Example: 11CX2A Add the letter "B" to listings with thru mounting holes tapped 3/8-24 (4). Example: 11CX2B Add the letter "C" to listings for low temperature (-40 C/F) applications. Example: 11CX2C Add "D01" to specify a "direct-couple" listing with 3/8 in. dia by 3/4 in. long flatted shaft. Example: 11CX2-D01 Add the letter "E" to listings for European Atex approvals. Example: 11CX2E For Replacement Basic Switch Assemblies, change the first number in the listing to "9". Example: 11CX2 becomes 91CX2 Short housing OPTIONS HOUSING SIZE Short Short Short Short Short Short Standard Standard BASIC SWITCHES BZ (2) BZ (2) BZ (2) BZ (2) BZ (2) BZ (2) BZ (4) BZ (4) CONTACT SPDT SPDT SPDT SPDT SPDT SPDT SPDT SPDT ELECTRICAL RATING A A A A F F A A SHAFT RESTORING FORCE TO CENTRE With Without With Without With Without With Without REFERENCE 11CX2 11CX12 11CX2E 11CX12E 1172CX2 1172CX12 21CX4 21CX14 UL listed for Class I, Group B (hydrogen atmospheres) Standard housing HOUSING SIZE Standard Standard Short Short Standard BASIC SWITCHES DT (2) DT (2) HS (2) HS (2) HS (4) CONTACT DPDT DPDT SPDT SPDT SPDT ELECTRICAL RATING C C D D D SHAFT RESTORING FORCE TO CENTRE With Without With Without With REFERENCE 24CX2 24CX12 16CX2 16CX12 26CX4 Analog output, 4 mA to 20 mA HOUSING SIZE Short Short Short Standard Standard BASIC SWITCHES None None None BZ (2) BZ (2) CONTACT N/A N/A N/A SPDT SPDT ELECTRICAL RATING G G G A, G A, G SHAFT RESTORING FORCE TO CENTRE With Without Without With Without REFERENCE 18CX0 18CX10 18CX10E 281CX2 281CX12 Bronze housing for use in corrosive environments 80CX switches have rugged bronze housings which are resistant to salt water and other corrosive environments. They comply with the NEMA 4X requirement for protection against corrosion, in addition to NEMA enclosure standards met by other CX switches. O-ring seals make the enclosure weatherproof, but are outside of required flame paths, maintaining explosion-proof requirements. HOUSING SIZE Standard Standard Standard Standard BASIC SWITCHES BZ (2) BZ (4) BZ (4) DT (2) www.honeywell.com/sensing CONTACT SPDT SPDT SPDT DPDT ELECTRICAL RATING A A A C SHAFT RESTORING FORCE TO CENTRE With With Without With REFERENCE 81CX2 81CX4 81CX14 84CX2 63 EXPLOSION PROOF SWITCHES LSX/BX Series weather sealed, explosion proof limit switches are for use either indoor or outdoors in hazardous atmospheres. They are completely sealed and designed for use in explosive gas/dust environments. LSX/BX Series Weather sealed explosion proof switches LSX/BX products meet the sealing standards of NEMA 1, 3, 4, 6, 7, 9 and 13. BX products are also sealed to IP67 standard and are ATEX approved (see specifications below). All heads are field adjustable at 90 increments. Heads with side rotary actuators can be adjusted for clockwise and counter clockwise operation. Actuators Sealing: LSX NEMA 1, 3, 4, 6, 7 (Class 1, Division 1, Groups B, C, D), 9 (Class 2, Division 1, Groups E, F, G), 13 IP67, NEMA 1, 3, 4, 6, 13 Rotary actuated switches BX Approvals: LSX/BX UL, CSA* BX only EExd IIC T6 category II 2 GD, SIRA 00ATEX 1037X Contacts: Electrical ratings A, B Silver Electrical rating C Gold Switching options: SPDT DPDT Single Pole, Double Throw Double Pole, Double Throw Snap action contacts (1NC/1NO) Snap action contacts (2NC/2NO) Operating torque max.: Standard Low Standard Low Standard Low 0,45 N m (4.0 in lb) 0,19 Nm (1.7 in lb) 15 9 60 66 Differential travel max. (DT): Standard SPDT Standard DPDT Low SPDT Low DPDT 5 7 3 4 Pretravel max. (PT): SPDT Double Break DPDT Double Break Overtravel min. (OT): * Applies only to listings with 1/2 in NPT or 3/4 in NPT Electrical ratings 10 amps continuous carry. Circuits on any one pole must be the same polarity. ac Volts Pilot duty: 600 Vac, 720 VA A SPDT NEMA A600 B DPDT NEMA B600 C SPDT/DPDT Amps at 0.35 Power Factor Vac Make Break 120 60 6 240 30 3 480 15 1.5 600 12 1.2 120 30 3 240 15 1.5 480 7.5 0.75 600 6 0.60 250 Vac or 60 Vdc, 0.050 amp max. Note: Levers are ordered separately (see pages 6971 for details) dc Volts Pilot duty: 240 Vdc, 30 watts A SPDT B DPDT C SPDT/DPDT 64 Make and Break Amps Vdc Inductive Resistive 120 0.25 0.8 240 0.15 0.4 120 0.25 0.8 240 0.15 0.4 250 Vac or 60 Vdc, 0.050 amp max. www.honeywell.com/sensing EXPLOSION PROOF SWITCHES OPTIONS Maintained contact Side rotary Operating torque max.: Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): SPDT DPDT Operating temperature: 0,45 N m (4.0 in lb) 65 20 30 35 -1 C to 121 C (30 F to 250 F) LSX Operating temperature: -12 C to 121 C (10 F to 250 F) LSX Low DT CONTACT SPDT SPDT SPDT SPDT DPDT DPDT DPDT SPDT CONDUIT 1/2 in - 14NPT 20 mm 3/4 in - 14NPT 1/2 in - 14NPT 3/4 in - 14NPT 20 mm 1/2 in - 14NPT 1/2 in - 14NPT ELECTRICAL RATING A A A C B B B A REFERENCE LSXA3K LSX4A3K LSXA4K LSXA3E LSXA4L LSX4A4L LSXA7L LSXP3K Maintained Maintained Maintained CONTACT SPDT DPDT DPDT CONDUIT 1/2 in - 14NPT 3/4 in - 14NPT 1/2 in - 14NPT ELECTRICAL RATING A B B REFERENCE LSXN3K LSXN4L LSXN7L CONTACT SPDT DPDT CONDUIT 1/2 in - 14NPT 3/4 in - 14NPT ELECTRICAL RATING A B REFERENCE BXN3K BXN4L BX Maintained Maintained Top rotary BX CONTACT SPDT SPDT DPDT CONDUIT 1/2 in - 14NPT 20 mm 3/4 in - 14NPT Operating temperature: ELECTRICAL RATING A A B REFERENCE BXA3K BX4A3K BXA4L -1 C to 121 C (30 F to 250 F) LSX Low Low Low Low DT/Low torque DT/Low torque torque torque CONTACT SPDT DPDT SPDT DPDT CONDUIT 1/2 in - 14NPT 3/4 in - 14NPT 1/2 in - 14NPT 3/4 in - 14NPT ELECTRICAL RATING A B A B REFERENCE LSXH3K LSXH4L LSXR3K LSXR4L BX Low torque Low torque Low torque CONTACT SPDT SPDT DPDT CONDUIT 1/2 in - 14NPT 1/2 in - 14NPT 3/4 in - 14NPT ELECTRICAL RATING A C C REFERENCE BXR3K BXR3E BXR4S Operating torque max.: Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): SPDT DPDT Operating temperature: CONTACT SPDT DPDT CONDUIT 1/2 in - 14NPT 3/4 in - 14NPT 0,28 N m (2.5 in lb) 25 100 10 12 -1 C to 121 C (30 F to 250 F) ELECTRICAL RATING A B REFERENCE LSXB3K LSXB4L Centre neutral Operating torque max. : Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): Operating temperature: CONTACT DPDT DPDT CONDUIT 3/4 in - 14NPT 20 mm 0,45 N m (4.0 in lb) 18 57 10 -1 C to 121 C (30 F to 250 F) ELECTRICAL RATING B B REFERENCE LSXM4N LSX4M4N www.honeywell.com/sensing 65 EXPLOSION PROOF SWITCHES LSX/BX Series (continued) Plunger actuated switches Top plungers Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): SPDT DPDT Operating temperature: 17,79 N (4 lb) 1,78 mm (0.07 in) 4,83 mm (0.19 in) 0,38 mm (0.015 in) 0,51 mm (0.02 in) -12 C to 93 C (10 F to 200 F) OPTIONS Top roller plunger Top pin plunger Head can be set at 90 increments for cam or slide actuation Operating point: 58,5 mm 0,76 mm (2.305 in 0.03 in) LSX CONTACT SPDT SPDT DPDT CONDUIT 1/2 in - 14NPT 20 mm 3/4 in - 14NPT ELECTRICAL RATING A A B REFERENCE LSXC3K LSX4C3K LSXC4L CONDUIT 20 mm 3/4 in - 14NPT 20 mm ELECTRICAL RATING A B B REFERENCE BX4C3K BXC4L BX4C4L CONTACT SPDT SPDT DPDT CONDUIT 1/2 in - 14NPT 20 mm 3/4 in - 14NPT ELECTRICAL RATING A A B REFERENCE LSXD3K LSX4D3K LSXD4L CONDUIT 20 mm ELECTRICAL RATING A REFERENCE BX4D3K BX CONTACT SPDT Top pin plunger, adjustable 7,9 (0.31) 21,6 (0.85) Min. operating point Max. 65,7 operating point (2,59) 72,0 (2,83) Operating point: CONTACT SPDT 66 CONDUIT 1/2 in - 14NPT 65,66 mm to 72,01 mm (2.585 in to 2.835 in) ELECTRICAL RATING A 68,6 mm 1.00 mm (2.700 in 0.04 in) LSX BX CONTACT SPDT DPDT DPDT Operating point: REFERENCE LSXV3K www.honeywell.com/sensing EXPLOSION PROOF SWITCHES Wobble actuated switches OPTIONS Side plungers Plastic rod Operating force max. (OF): Pretravel max. (PT): Overtravel min. (OT): Differential travel max. (DT): Operating temperature: 26,69 N (6 lb) 2,54 mm (0.10 in) 4,83 mm (0.19 in) 1,14 mm (0.045) -12 C to 93 C (10 F to 200 F) OPTIONS Side pin plunger Operating point: CONTACT SPDT DPDT CONDUIT 1/2 in - 14NPT 3/4 in - 14NPT 33,0 mm (1.30 in) ELECTRICAL RATING A B REFERENCE LSXE3K LSXE4L Operating force max. (OF): Pretravel max. (PT): Operating temperature: CONTACT SPDT DPDT Side roller plunger CONDUIT 1/2 in - 14NPT 3/4 in - 14NPT ELECTRICAL RATING A B 2,78 N (10 oz) 25,4 mm (1.0 in) -12 C to 93 C (10 F to 200 F) REFERENCE LSXJ3K-7A LSXJ4L-7A Roller may be set in vertical or horizontal position for cam or slide actuation Cat whisker Operating point: 44,1 mm (1.735 in) LSX CONTACT SPDT CONDUIT 1/2 in - 14NPT ELECTRICAL RATING A REFERENCE LSXF3K CONDUIT 1/2 in - 14NPT ELECTRICAL RATING A REFERENCE BXF3K BX CONTACT SPDT Operating force max. (OF): Pretravel max. (PT): Operating temperature: CONTACT SPDT CONDUIT 1/2 in - 14NPT www.honeywell.com/sensing ELECTRICAL RATING A 1,39 N (5 oz) 50,8 mm (2.0 in) -12 C to 93 C (10 F to 200 F) REFERENCE LSXK3K-8A 67 Blank page 68 www.honeywell.com/sensing LEVERS Levers REFERENCE Separate levers must be ordered with side rotary types. The table provides a cross reference between product families and the lever order/ reference numbers. The following pages describe the levers. Illustrations are for reference only. Exact mounting drawings and dimensions are available from your local sales office or from the website below. Levers lock in any position, 360 around the shaft. Rollers may be mounted on the front or back of the lever. All levers are supplied with cap screws. Explosion proof switches Because of explosion proof requirements, only nylon rollers or other non sparking material should be selected. BX/LSX, CX and EX plunger and cat whisker types are of non sparking material. Do not mix or substitute. Specification (unless stated otherwise) Lever radius/length: Roller Diameter: Roller Width: -EX 1.5 in (38,1 mm) 0.75 in (19,1 mm) 0.25 in (6,35 mm) 0.312 in (7,92 mm) Note: Not all levers are compatible with all switches 6PA57 6PA63 6PA69 6PA80 6PA82 6PA102 6PA144 GLZ51A GLZ51B GLZ52A GLZ52B GLZ54J GLZ55B LSZ51 LSZ51A LSZ51B LSZ51C LSZ51D LSZ51W LSZ51Y LSZ52 LSZ52A LSZ52B LSZ52C LSZ52D LSZ52J LSZ52K LSZ52M LSZ52N LSZ52W LSZ52Y LSZ53A LSZ53B LSZ53D LSZ53E LSZ53P LSZ53S LSZ53U LSZ54 LSZ54M LSZ54N LSZ54R LSZ54V LSZ55 LSZ55A LSZ55B LSZ55C LSZ55D LSZ55W LSZ55Y LSZ61 LSZ67AA LSZ68 6PA5-EX 6PA127-EX 6PA130-EX 6PA131-EX 6PA136-EX 6PA138-EX 6PA142-EX 6PA204-EX ROLLER MATERIAL Aluminium Stainless steel Spring rod Steel Steel Nylon Ball bearing Nylon Steel Nylon Steel Aluminium Steel N/A Nylon Steel Nylon Steel Rubber Rubber N/A Nylon Steel Nylon Steel Nylon Nylon Nylon Nylon Rubber Rubber Nylon Steel Steel Nylon Steel Nylon Steel N/A Aluminium Stainless steel Spring wire Cable N/A Nylon Steel Nylon Steel Rubber Rubber Nylatron Rubber Delrin Bronze Nylon Bronze Bronze Aluminium Nylon Bronze Nylon GLA LIMIT SWITCH SERIES HDLS LS2 LS EXPLOSION PROOF SERIES BX/LSX CX EX ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! Stainless steel levers LS2Z51A LS2Z51B LS2Z52A LS2Z52B LS2Z54N Nylon Steel Nylon Steel Steel ! ! ! ! ! www.honeywell.com/sensing ! ! ! ! ! ! ! 69 LEVERS OPTIONS * denotes lever suitable for Explosion Proof Series switches One way roller lever Standard fixed lever MOUNTED ON REFERENCE LSZ51* Nylon roller Metal roller Front Front LSZ51A* LSZ51B Nylon roller Metal roller Back Back LSZ51C* LSZ51D Nylon roller Metal roller Front Front GLZ51A GLZ51B Bronze roller Nylon roller Front Front 6PA5-EX* 6PA127-EX* Ball bearing roller Front 6PA144 Without roller Adjustable rod RADIUS/LENGTH Hub only Bronze roller, clockwise RADIUS/LENGTH REFERENCE 1.56 in (39,6 mm) 6PA130-EX* Bronze roller, counter clockwise 1.56 in (39,6 mm) 6PA142-EX* Perpendicular (cross) roller lever Offset fixed lever REFERENCE LSZ54* Aluminium rod 5.5 in (139,7 mm) LSZ54M* Stainless steel rod 13.0 in (330,2 mm) LSZ54N Aluminium, spring only 12.0 in (305 mm) LSZ54R Aluminium, flexible cable 4.8 in (122 mm) LSZ54V Aluminium rod 7.9 in (200 mm) GLZ54J Stainless steel rod 13.0 in (330,2 mm) 6PA63 Aluminium rod 5.3 in (134,1 mm) 6PA136-EX* Adjustable rod, nylon roller MOUNTED ON REFERENCE LSZ55* Nylon roller Metal roller Back Back LSZ55A* LSZ55B Nylon roller Metal roller Front Front LSZ55C* LSZ55D Metal roller Front GLZ55B Without roller RADIUS/LENGTH REFERENCE 1.81 in (46,0 mm) 6PA131-EX* Bronze roller Yoke lever Aluminium rod, nylon roler RADIUS/LENGTH REFERENCE 12.5 in (317,5 mm) 6PA204-EX* Adjustable lever Spring rod Operating radius/length: -EX 1.5 in to 3.5 in (38,1 mm to 88,9 mm) 1.69 in to 3.0 in (42,9 mm to 76,2 mm) Adjustable lever, without roller MOUNTED ON REFERENCE LSZ52 Nylon roller Metal roller Back Back LSZ52A* LSZ52B Nylon roller Metal roller Nylon roller, O 1.0 in (25,4) x 0.5 in (12,7 mm) Nylon roller, O 1.5 in (38,1) Nylon roller, O 2.0 in (50,8) Nylon roller, 0.5 in wide (12,7 mm) Front Front LSZ52C* LSZ52D Front Front Front Front LSZ52J* LSZ52K* LSZ52M* LSZ52N* Nylon roller Metal roller Back Back GLZ52A GLZ52B Nylon roller, O 1.0 in (25,4) x 0.5 in (12,7 mm) Front Nylon roller Metal roller MOUNTED ON Front/Back Front/Back REFERENCE LSZ53A LSZ53B Metal roller Front/Front LSZ53D Nylon roller Back/Front LSZ53E* Metal roller Nylon roller Back/Back Back/Back LSZ53P LSZ53S* Metal roller Back/Front LSZ53U Metal roller Metal roller Nylon roller Front/Back Front/Front Front/Front 6PA80 6PA82 6PA102 RADIUS/LENGTH 12.0 in (305 mm) REFERENCE LSZ68 O 0.17 in (4,32 mm) 7.4 in (188 mm) 6PA69 6PA138-EX* Note: 70 O 0.25 in (6,35 mm) Not all levers are compatible with all switches www.honeywell.com/sensing LEVERS * denotes lever suitable for Explosion Proof Series switches Stainless steel levers **Large rubber roller, adjustable lever Flexible loop Roller Diameter: Roller Width: 0.75 in (19,1 mm) 0.25 in (6,35 mm) OPTIONS Standard fixed lever Flexible loop RADIUS/LENGTH 6.0 in (152 mm) REFERENCE LSZ61 REFERENCE LSZ52W O 1.6 in X 0.50 in wide roller (40,6 mm X 12,7 mm) Hand operated button O 2 in X 0.50 in wide roller (50,8 mm X 12,7 mm) LSZ52Y Operating radius/length: 1.5 in (38,1 mm) Nylon roller MOUNTED ON Front REFERENCE LS2Z51A* Stainless steel roller Front LS2Z51B **Conveyor roller arm Adjustable lever O 1.5 in (38,1 mm) REFERENCE 6PA57 **Large rubber roller, fixed lever Operating radius/length: Plastic roller, 1.5 in O X 3.8 in long (38,1 mm X 96,5 mm) 6.78 in (172,2 mm) REFERENCE LSZ67AA NOTICE ** O 1.6 in X 0.50 in wide roller (40,6 mm X 12,7 mm) O 2 in X 0.50 in wide roller (50,8 mm X 12,7 mm) REFERENCE LSZ51W LSZ51Y Large rubber rollers and conveyor roller arm Because of the lever's mass, the limit switch should be mounted with the lever facing down. This will enable gravity to help restore the switch to the free position. Operating radius/length: 1.5 in to 3.5 in (38,1 mm to 88,9 mm) Nylon roller MOUNTED ON Back REFERENCE LS2Z52A* Stainless steel roller Back LS2Z52B Adjustable rod **Large rubber roller, fixed offset lever Operating radius/length: O 1.6 in X 0.50 in wide roller (40,6 mm X 12,7 mm) O 2 in X 0.50 in wide roller (50,8 mm X 12,7 mm) 13 in (330,2 mm) REFERENCE LS2Z54N REFERENCE LSZ55W LSZ55Y Note: Not all levers are compatible with all switches www.honeywell.com/sensing 71 POWER RELAYS Solder/Plug-In Terminal, DPDT 2,6 [0.10] SZR-MY Series Power Relay 8 - O 1,2 [0.05] x 3 Holes Current rating (SZR-MY2): Current rating (SZR-MY4): Contact resistance: Contact material: Agency approvals: Operate time: Release time: Ambient temperature: Ambient humidity: Switching options: 5A 3A 50 mOhm max. Fine silver UL, CE, CSA 20 ms max. 20 ms max. -25 C to 75 C (-13 F to 167 F) 45% RH to 85% RH DPDT, 4PDT 6,3 [0.25] SZR-MY Series relays have a small package design for multiple application needs. Relays are available in two configurations: DPDT with a 5 A load and 4PDT with a 3 A load. One standard and three options are available: LED indicator, internal surge protection diode, and LED indicator/diode protection. 0,5 [0.02] Max. 36,0 [1.42] Max. 28,0 [1.10] 0,5 [0.02] SZR-MY Series general-purpose power relays are designed for a wide range of applications including power, as well as logic control, for factory machines and control panels. Max. 21,5 [0.85] 6,0 [0.24] Standard COIL INPUT VOLTAGE 110/120 Vac 220 Vac 12 Vdc 24 Vdc MAX. CONTACT RATING 250 Vac/5 amp 250 Vac/5 amp 125 Vdc/1 amp 125 Vdc/1 amp REFERENCE SZR-MY2-1-AC110-120V SZR-MY2-1-AC220V SZR-MY2-1-DC12V SZR-MY2-1-DC24V MAX. CONTACT RATING 250 Vac/5 amp 250 Vac/5 amp 125 Vdc/1 amp 125 Vdc/1 amp REFERENCE SZR-MY2-N1-AC110-120V SZR-MY2-N1-AC220V SZR-MY2-N1-DC12V SZR-MY2-N1-DC24V MAX. CONTACT RATING 125 Vdc/1 amp REFERENCE SZR-MY2-D1-DC24V LED Indicator COIL INPUT VOLTAGE 110/120 Vac 220 Vac 12 Vdc 24 Vdc Diode Protection MY2 Series COIL INPUT VOLTAGE 24 Vdc OPTIONS LED Indicator/Diode Protection COIL INPUT VOLTAGE 24 Vdc 3,3 [0.13] 1,0 [0.04] Standard, PCB Terminal, DPDT 6,3 [0.25] 0,5 [0.02] Max. 36,0 [1.42] COIL INPUT VOLTAGE 110/120 Vac 220/240 Vac 24 Vdc 72 Max. 28,0 [1.10] 0,5 [0.02] 3,5 [0.14] Max. 21,5 [0.85] 6,0 [0.24] MAX. CONTACT RATING 250 Vac/5 amp 250 Vac/5 amp 125 Vdc/1 amp REFERENCE SZR-MY2-1P-AC110-120V SZR-MY2-1P-AC220V-240V SZR-MY2-1P-DC24V www.honeywell.com/sensing MAX. CONTACT RATING 125 Vdc/1 amp REFERENCE SZR-MY2-X1-DC24V POWER RELAYS Solder/Plug-In Terminal, 4PDT MY4 Series 2,6 [0.10] OPTIONS 14 - O 1.2 [0.05] x 3 Holes Max. 28,0 [1.10] 6,3 [0.25] 0,5 [0.02] 6,3 [0.25] 3,5 [0.14] 0,5 [0.02] Max. 36,0 [1.42] COIL INPUT VOLTAGE 110/120 Vac 220/240 Vac 24 Vdc Max. 21,5 [0.85] 6,0 [0.24] Standard 5,0 [0.20] MAX. CONTACT RATING 250 Vac/3 amp 250 Vac/3 amp 125 Vdc/0.6 amp Max. 21,5 [0.85] 0,5 [0.02] Max. 36,0 [1.42] Max. 28,0 [1.10] 0,5 [0.02] 3,3 [0.13] 1,0 [0.04] Standard, PCB Terminal, 4PDT REFERENCE SZR-MY4-1P-AC110-120V SZR-MY4-1P-AC220V-240V SZR-MY4-1P-DC24V COIL INPUT VOLTAGE 110/120 Vac 220 Vac 12 Vdc 24 Vdc MAX. CONTACT RATING 250 Vac/3 amp 250 Vac/3 amp 125 Vdc/0.6 amp 125 Vdc/0.6 amp REFERENCE SZR-MY4-1-AC110-120V SZR-MY4-1-AC220V SZR-MY4-1-DC12V SZR-MY4-1-DC24V MAX. CONTACT RATING 250 Vac/3 amp 250 Vac/3 amp 125 Vdc/0.6 amp 125 Vdc/0.6 amp REFERENCE SZR-MY4-N1-AC110-120V SZR-MY4-N1-AC220V SZR-MY4-N1-DC12V SZR-MY4-N1-DC24V MAX. CONTACT RATING 125 Vdc/0.6 amp REFERENCE SZR-MY4-D1-DC24V LED Indicator COIL INPUT VOLTAGE 110/120 Vac 220 Vac 12 Vdc 24 Vdc Diode Protection COIL INPUT VOLTAGE 24 Vdc LED Indicator/Diode Protection COIL INPUT VOLTAGE 24 Vdc www.honeywell.com/sensing MAX. CONTACT RATING 125 Vdc/0.6 amp REFERENCE SZR-MY4-X1-DC24V 73 POWER RELAYS SZR-LY Series Power Relay LY2 Series OPTIONS Operate time: Release time: Ambient temperature: Ambient humidity: Switching options: 10 A 50 mOhm max. Silver cadium oxide UL, CE, CSA 18,000 operations/hour (mechanical) 1,800 operations/hour (electrical) 25 ms max. 25 ms max. -25 C to 70 C (-13 F to 158 F) 45% RH to 85% RH DPDT, 4PDT Max. 28,0 [1.10] REFERENCE SZR-LY2-1P-AC110-120V SZR-LY2-1P-DC24V Solder/Plug-In Terminal, DPDT 14 - O 3,0 [0.12] 3,0 [0.12] Max. 36,0 [1.42] 6,4 [0.26] Max. 21,5 [0.85] Standard COIL INPUT VOLTAGE 110/120 Vac 220 Vac 12 Vdc 24 Vdc MAX. CONTACT RATING 250 Vac/10 amp 250 Vac/10 amp 125 Vdc/2 amp 125 Vdc/2 amp REFERENCE SZR-LY2-1-AC110-120V SZR-LY2-1-AC220V SZR-LY2-1-DC12V SZR-LY2-1-DC24V MAX. CONTACT RATING 250 Vac/10 amp 250 Vac/10 amp 125 Vdc/2 amp 125 Vdc/2 amp REFERENCE SZR-LY2-N1-AC110-120V SZR-LY2-N1-AC220V SZR-LY2-N1-DC12V SZR-LY2-N1-DC24V MAX. CONTACT RATING 125 Vdc/2 amp REFERENCE SZR-LY2-D1-DC24V LED Indicator COIL INPUT VOLTAGE 110/120 Vac 220 Vac 12 Vdc 24 Vdc Diode Protection COIL INPUT VOLTAGE 24 Vdc LED Indicator/Diode Protection COIL INPUT VOLTAGE 24 Vdc 74 www.honeywell.com/sensing MAX. CONTACT RATING 125 Vdc/ 2 amp REFERENCE SZR-LY2-X1-DC24V Max. 28,0 [1.10] Current rating: Contact resistance: Contact material: Agency approvals: Operating frequency: MAX. CONTACT RATING 250 Vac/10 amp 125 Vdc/2 amp 5,75 [0.23] One standard and three options are available: LED indicator, internal surge protection diode, and LED indicator/diode protection. COIL INPUT VOLTAGE 110/120 Vac 24 Vdc Max. 21,5 [0.85] 4,5 [0.18] 5,0 [0.20] SZR-LY Series relays break 10 A loads are ideal for control panels that require stable and reliable relays. 1,0 [0.04] Max. 36,0 [1.42] 0,5 [0.02] SZR-LY Series general-purpose power relays are designed for a wide range of applications including power, as well as logic control, for factory machines and control panels. 5,75 [0.23] 2,0 [0.08] 0,5 [0.02] Standard, PCB Terminal, DPDT POWER RELAYS LY4 Series OPTIONS Solder/Plug-In Terminal, 4PDT Max. 41,5 [1.63] 4,5 [0.18] Max. 28,0 [1.10] 14 - O 3.0 Holes 5,0 [0.20] Max. 28,0 [1.10] 2,0 [0.08] 1,0 [0.04] Max. 36,0 [1.42] 0,5 [0.02] 0,5 [0.02] Standard, PCB Terminal, 4PDT Max. 36,0 [1.42] 3,0 [0.12] 6,4 [0.25] Max. 41,5 [1.63] Standard COIL INPUT VOLTAGE 110/120 Vac 220/240 Vac 24 Vdc MAX. CONTACT RATING 250 Vac/10 amp 250 Vac/10 amp 125 Vdc/2 amp REFERENCE SZR-LY4-1P-AC110-120V SZR-LY4-1P-AC220V-240V SZR-LY4-1P-DC24V COIL INPUT VOLTAGE 110/120 Vac 220 Vac 12 Vdc 24 Vdc MAX. CONTACT RATING 250 Vac/10 amp 250 Vac/10 amp 125 Vdc/2 amp 125 Vdc/2 amp REFERENCE SZR-LY4-1-AC110-120V SZR-LY4-1-AC220V SZR-LY4-1-DC12V SZR-LY4-1-DC24V MAX. CONTACT RATING 250 Vac/10 amp 250 Vac/10 amp 125 Vdc/2 amp 125 Vdc/2 amp REFERENCE SZR-LY4-N1-AC110-120V SZR-LY4-N1-AC220V SZR-LY4-N1-DC12V SZR-LY4-N1-DC24V MAX. CONTACT RATING 125 Vdc/2 amp REFERENCE SZR-LY4-D1-DC24V LED Indicator COIL INPUT VOLTAGE 110/120 Vac 220 Vac 12 Vdc 24 Vdc Diode Protection COIL INPUT VOLTAGE 24 Vdc LED Indicator/Diode Protection COIL INPUT VOLTAGE 24 Vdc www.honeywell.com/sensing MAX. CONTACT RATING 125 Vdc/2 amp REFERENCE SZR-LY4-X1-DC24V 75 POWER RELAYS MY2 Series Socket LY2 Series Socket 22,0 [0.87] 30,0 [1.18] 25,0 [0.99] 47,0 [1.85] 2 - M4 2 - O 4,5 [0.18] Holes 2,5 [0.10] 18,0 [0.70] 26,0 [1.02] 14,5 [0.57] 30,0 [1.18] 25,0 [0.99] Max. 61,0 [2.40] Max. 61,0 [2.40] POLES 2 REFERENCE SZX-SMF-08N 2 - O 4,5 [0.18] Holes 14-M3.5x8 18,0 [0.70] 26,0 [1.02] 2-M4 36,0 0,2 [1.42 0.008] 8,0 [0.31] Max. 45,5 [1.79] 25,0 [0.99] 30,0 [1.18] 3,4 [0.13] 68,0 [2.68] 62,0 0,1 [2.44 .004] 2-M3 or 2-M4 2 - O 6,0 [0.24] 7,0 [0.28] 69,0 0,3 [2.72 0.01] 4,5 [0.18] 26,0 [1.02] 35,2 [1.39] 15,6 [0.61] 45,0 [1.77] 3,9 [0.15] 4,2 [0.17] REFERENCE SZX-SLF-08N LY4 Series Socket 6,0 [0.24] 62,0 [2.44] POLES 2 35,5 [1.40] MY4 Series Socket TYPE Rail socket Max. 78,5 [3.09] TYPE Rail socket 3,0 [0.12] 25,0 0,2 [0.99 .008] 4,2 [0.17] 62,0 0,1 [2.44 .004] 45,0 [1.77] 15,6 [0.61] 3,0 [0.12] 2-M3 or 2-M4 2 - O 4,5 [0.18] Holes 26,0 [1.02] 19,0 [0.75] 8,0 [0.31] 26,0 [1.02] 35,2 [1.39] 62,0 [2.44] 4,2 [0.17] 3,9 [0.15] 67,0 [2.64] 6,0 [0.24] Max. 61,0 [2.40] Max. 66,0 [2.60] Max. 30,0 [1.18] TYPE Rail socket 76 POLES 4 REFERENCE SZX-SMF-14N TYPE Rail socket www.honeywell.com/sensing POLES 4 REFERENCE SZX-SLF-14 SAFETY SWITCHES Electromechanical Safety Switches Honeywell is a worldwide leader in advanced switching and sensing technology - especially in the area of industrial safety. We offer both electromechanical safety switches and electronic safety sensors as well as safety control modules for safety applications in all categories of risk. Customers can count on our diverse product line to meet all of their machine safety applications. Honeywell products meet or exceed European machine safety standards and have been approved (CE, BG, INRS) for use in Europe for more than 25 years. As North America moves toward harmonizing with global standards, machine builders and users can confidently turn to Honeywell for compliant machine safety solutions. Our products are designed to meet all applicable OSHA and ANSI standards. Refer to pages 6 and 7 for more information about degrees of protection and electrical ratings. Protective Guarding Cable Pull Switches Protective guarding around a dangerous machine can be achieved with tamper-resistant safety switches. Safety switches incorporate positive opening operation such that even a welded contact will be mechanically broken and a stop signaled. These switches monitor the position of moveable guards and doors, which are used to safeguard access to equipment and provide protection from ejected pieces, chips, projectiles or oil. These safeguards require a relatively low investment and provide reliable protection if they are regularly checked and maintained. Cable-pull limit switches serve as a readily accessible means of emergency stop for applications. These cable-pull devices are visible, accessible and easy to use and they immediately open the emergency stop circuit when activated. www.honeywell.com/sensing 77 SAFETY SWITCHES GKM Series Global Miniature Safety Key Operated Switch Used alone as Category 1 safety components or, in conjunction with other safety switches and our complete range of safety relays, it is possible to construct comprehensive protection schemes with Category 2, 3 or 4 compliance. The preleaded versions allow rapid fit, easy cable routing and function testing which cut costs dramatically in OEM applications. Simple upgrade guarding solution for End User applications. Low energy basic switches are rated as follows: Operating Voltage Ue 1 Vdc to 60 Vdc or 1 Vac to 125 Vac 1 mA to 50 mA Operating Current Ie Example of catalog listing using a low energy basic switch - GKMA19 Mechanical life: > 1 million Sealing: IP66/67, EN 60529, NEMA 1, 12, 13 Operating temperature: -25 C to 85 C (-13 F to 185 F) Approvals: CE, UL, CSA AC15 B300 DC13 Q300 Contacts: Silver Low energy Gold plated Switching options: Slow action contacts 1 Normally Closed/1 Normally Open, Break Before Make 1NC/1NO, BBM - GKMF 1NC/1NO, BBM, low energy - GKMA, B, C, D 3 4 1 Brown Blue 3 2 1 White 2 3 2 4 4 Black 1 2 Normally Closed 2NC - GKMF 2NC, low energy - GKMA, B, C, D 3 2 4 3 2 1 Brown Blue 3 1 White 2 4 Black 1 4 Electrical ratings: Designation & Utilization Category AC15 AC15 AC15 AC14 A600 A300 B300 D300 DC13 DC13 Q300 R300 IEC 60947-5-1/EN 60947-5-1 Rated operational current le (A) at rated operational voltage Ue 120 V 240 V 380 V 480 V 500 V 600 V 6 3 1,9 1,5 1,4 1,2 6 3 3 1.5 0,6 0,3 125 V 250 V 0,55 0,27 0,22 0,1 Of key slot 90 - Key shown in optional actuating positions 16 max. / 0.63 Body style 'B' 17,2 / 0.67 1,6 / 0.058 12,8 / 0.504 Key slot 22,0 / 0.866 10 max. / 0.30 2 X mounting holes for M4 or #8 screws. Counter bored both sides 08,3 X 4,5 deep. 0.366 0.177 78 32 max. / 1.26 37,4 / 1.47 2,3 / 0.69 34 max. / 0.34 www.honeywell.com/sensing VA rating Make Break 7200 720 7200 720 3600 360 432 72 69 28 69 28 SAFETY SWITCHES KEY STYLE OPTIONS Side exit cable Side exit M12 dc micro-change connector Straight key 45 / 1.77 2 + max. / 0.945 3,5 / 0.138 12,8 / 0.504 2,5 / 0.093 CABLE LENGTH 1m 1m 2m 2m 2m 2m 3m 3m 3m 3m CONTACT 2NC, low energy 1NC/1NO, BBM, low energy 1NC/1NO, BBM 2NC 2NC, low energy 1NC/1NO, BBM, low energy 1NC/1NO, BBM 2NC 2NC, low energy 1NC/1NO, BBM, low energy REFERENCE GKMA17 GKMA19 GKMA23 GKMA26 GKMA27 GKMA29 GKMA33 GKMA36 GKMA37 GKMA39 Face 'A' 21,3 / 0.638 CONTACT 1NC/1NO, BBM 2NC 2NC, low energy 1NC/1NO, BBM, low energy REFERENCE GKMC03 GKMC06 GKMC07 GKMC09 15 / 0.59 6,4 min. / 0.252 22 / 0.866 2 holes for M4 or #8 screws REFERENCE GKZ51M Stainless steel Bottom exit M12 dc micro-change connector 90 key Bottom exit cable 2 holes for M4 or #8 screws with 45 C' SK X 2,1 deep 0.083 14 max. / 0.55 Face 'A' CONTACT 1NC/1NO, BBM 2NC, low energy 1NC/1NO, BBM, low energy CABLE LENGTH 1m 1m 1m 1m 2m 2m 2m 2m 3m 3m 3m 3m CONTACT 1NC/1NO, BBM 2NC 2NC, low energy 1NC/1NO, BBM, low energy 1NC/1NO, BBM 2NC 2NC, low energy 1NC/1NO, BBM, low energy 1NC/1NO, BBM 2NC 2NC, low energy 1NC/1NO, BBM, low energy REFERENCE GKMB13 GKMB16 GKMB17 GKMB19 GKMB23 GKMB26 GKMB27 GKMB29 GKMB33 GKMB36 GKMB37 GKMB39 REFERENCE GKMD03 GKMD07 GKMD09 22 / 0.866 6,4 min. / 0.252 Dual exit M12 dc micro-change connector 24 max. / 0.945 Stainless steel CONTACT 1NC/1NO, BBM 2NC 2NC, low energy 1NC/1NO, BBM, low energy 12,8 / 0.504 32 max. / 1.25 REFERENCE GKZ52M REFERENCE GKMF03 GKMF06 GKMF07 GKMF09 www.honeywell.com/sensing 79 SAFETY SWITCHES GSS Series Hinge Mount Safety Limit Switch The Hinge Mount Safety Limit Switch is designed for use on machine access doors as an alternative solution to key operated interlocks and safety limit switches. When the access door is opened, a follower pin (not supplied) slides down the slot in the actuator lever, forcing the actuator lever to rotate and positively open the NC safety circuit to shut off the machine. Closing the access door rotates the actuator lever to the reset position, closing the NC safety contacts. The Hinge Mount Safety Limit Switch minimizes alignment problems because it may be offset-mounted from the hinge point of the door. The tamper-resistant design and the positive opening contacts provide a higher level of safety than the conventional spring-driven limit switches often used to monitor door position. Low Energy Switching In today's demanding age of low energy controls, electromechanical switches are frequently used to interface directly with safety relays, PLCs and other low energy devices. To accommodate this requirement GSS offers a new gold plated contact version of the standard basic switch. This improves reliability of switching at low currents and voltages by protecting the contact surfaces from contamination during operation or storage prior to use. Standard silver contacts have a disadvantage in that the contact surface may tarnish under certain environmental conditions, e.g. in the presence of moisture. Low energy basic switches are rated as follows: Operating Voltage Ue 1 Vdc to 60 Vdc or 1 Vac to 125 Vac 1 mA to 50 mA Operating Current Ie Example of catalog listing using a low energy basic switch - GSCB33S2. Switching options: GSC/D Snap action contacts (1NC/1NO) 13 14 21 22 Zb Slow action contacts (1NC/1NO) BBM GSE Slow action contacts (4NC) 12 21 22 31 32 4Y 41 42 Slow action contacts (2NC/2NO) BBM 11 12 21 22 22 21 11 2Y, 2X Zb 13 14 Slow action contacts (2NC) 11 34 44 Slow action contacts (3NC/1NO) BBM 12 2Y 21 33 43 11 12 21 22 31 32 43 44 3Y, 1X 22 Electrical ratings: Designation & Utilization Category 80 AC15 AC15 AC15 AC14 A600 A300 B300 D300 DC13 DC13 Q300 R300 IEC 60947-5-1/EN 60947-5-1 Rated operational current le (A) at rated operational voltage Ue 120 V 240 V 380 V 480 V 500 V 600 V 6 3 1,9 1,5 1,4 1,2 6 3 3 1.5 0,6 0,3 125 V 250 V 0,55 0,27 0,22 0,1 www.honeywell.com/sensing VA rating Make Break 7200 720 7200 720 3600 360 432 72 69 28 69 28 SAFETY SWITCHES ACTUATED SWITCHES GSC Metal body GSD Plastic body EN 50047 Safety Standard Rotated 90 to the left from center 22 / 0.87 20 / 0.78 24,75 / 0.97 Rotated 90 to the right from center 104 / 4.09 70 / 2.76 45 / 1.77 3/ 0.12 180 MIN R 2,15 / 0.08 55 / 2.16 GSC - Metal body GSC - Metal body 30,5 / 1.20 14,5 / 0.57 3,5 / 0.138 30 / 1.18 CONTACT 1NC/1NO 1NC/1NO, BBM 2NC 2NC, low energy CONDUIT 1/2 in NPT 1/2 in NPT 1/2 in NPT 20 mm REFERENCE GSCA01S1 GSCA03S1 GSCA06S1 GSCC36S1 GSD - Plastic body conduit thread 19,8 / 0.78 o 23 / o 0.9 Mechanical life: up to 1 million Sealing: IP 66, NEMA 1, 4 (GSC), 12, 13 Operating temperature: -25 C to 85 C (-13 F to 185 F) Approvals: IEC/EN 60947-5-1 AC15 A300 DC13 Q300 UL, CSA, BG CONTACT 1NC/1NO, BBM 2NC 1NC/1NO, BBM 2NC 1NC/1NO CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm REFERENCE GSDA03S1 GSDA06S1 GSDB03S1 GSDB06S1 GSDC01S1 CONTACT 1NC/1NO 1NC/1NO, BBM 2NC 2NC, low energy CONDUIT 1/2 in NPT 1/2 in NPT 1/2 in NPT PG 13,5 REFERENCE GSCA01S3 GSCA03S3 GSCA06S3 GSCB36S3 GSD - Plastic body CONTACT 1NC/1NO, BBM 2NC 1NC/1NO, BBM 2NC 1NC/1NO CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm REFERENCE GSDA03S3 GSDA06S3 GSDB03S3 GSDB06S3 GSDC01S3 Rotated 90 either direction from center 5,1 / 0.20 11,5 / 0.45 2/ 0.08 45 / 1.77 70 / 2.76 90 min. 90 min. 12,5 / 0.49 28 / 24,8 / 0.97 GSC - Metal body CONTACT 1NC/1NO 1NC/1NO, BBM 2NC 2NC, low energy CONDUIT 1/2 in NPT 1/2 in NPT 1/2 in NPT PG 13,5 REFERENCE GSCA01S2 GSCA03S2 GSCA06S2 GSCB36S2 GSD - Plastic body CONTACT 1NC/1NO, BBM 2NC 1NC/1NO, BBM 2NC 1NC/1NO CONDUIT 1/2 in NPT 1/2 in NPT PG 13,5 PG 13,5 20 mm REFERENCE GSDA03S2 GSDA06S2 GSDB03S2 GSDB06S2 GSDC01S2 www.honeywell.com/sensing 81 SAFETY SWITCHES GSE EN 50047 Compatible Safety 3 Conduit Metal Standard 12,5 / 0.49 ACTUATED SWITCHES Rotated 90 to the left from center 42 / 1.65 40 / 1.57 22 / 0.87 20 / 0.79 24,75 / 0.97 104 / 4.09 70 / 2.76 45 / 1.77 3/ 0.12 R 2,15 / 0.08 60 / 2.37 13,75 / 0.54 12 / 0.47 30 / 1.18 2,5 / 0.1 52 / 2.05 57 / 2.24 4/ 0.16 CONTACT 2NC/2NO, BBM 3NC/1NO, BBM 4NC, low energy 65 / 2.56 conduit thread CONDUIT 1/2 in NPT 1/2 in NPT 20 mm REFERENCE GSEA44S1 GSEA46S1 GSEC41S1 23,8 / 0.94 o 23 / o 0.9 Mechanical life: up to 1 million Sealing: IP 66, NEMA/UL 1, 4, 12, 13 Operating temperature: -25 C to 85 C (-13 F to 185 F) Approvals: IEC/EN 60947-5-1 AC15 A300 DC13 Q300 UL, CSA, BG Rotated 90 either direction from center 5,1 / 0.20 11,5 / 0.45 2/ 0.08 45 / 1.77 70 / 2.76 90 min. 90 min. 12,5 / 0.49 28 / CONTACT 2NC/2NO, BBM CONDUIT 1/2 in NPT 24,8 / 0.97 REFERENCE GSEA44S2 Rotated 90 to the right from center 180 CONTACT 2NC/2NO, BBM 82 MIN CONDUIT 1/2 in NPT REFERENCE GSEA44S3 www.honeywell.com/sensing SAFETY SWITCHES GK Series Dual Entry Key Operated Safety Interlock Switch The GK Series is designed specifically for use on machines where key removal brings the machine to an immediate safe condition. It provides enhanced operator safety when added to hinged or sliding guard doors, screens and protective covers on enclosures. The GK Series is especially well suited for large door applications, typically in the automotive plant floor environment. Its heavy duty construction withstands harsh industrial environments where rugged, long-term durability is required. Nearly 1000 options are available in a simple to understand part number tree. A safety lockout device is also available for use with the GK Series. The lockout device (GKZL2) is specifically designed to prevent a key from being inserted either manually, or by the access door being closed while maintenance personnel are working on the machine. When inserted, the lockout device can accommodate up to four padlocks to prevent unauthorised removal of the device. Mechanical life: up to 15 million Sealing: IP 67, NEMA/UL type 1, 4, 12,13 Operating temperature: -25 C to 85 C (-13 F to 185 F) Approvals: CE, CSA, UL AC15 A300/A600 DC13 Q300 Contacts: Silver Low energy Gold Switching options: Snap action contacts (1NC/1NO) Snap action contacts (2NC/2NO) 13 Zb 21 13 14 11 12 23 24 21 22 14 22 Slow action contacts (1NC/1NO), BBM 22 21 Slow action contacts (2NC) 21 22 11 12 2Y Zb 13 14 Slow action contacts (2NC/2NO), BBM Slow action contacts (3NC/1NO) 11 12 11 12 21 22 21 22 31 32 2y,2x 13 14 23 24 3y,1x 43 44 Slow action contacts (4NC) 11 12 21 22 31 32 41 42 4y Electrical ratings: Designation & Utilization Category AC15 AC15 AC15 AC14 A600 A300 B300 D300 DC13 DC13 Q300 R300 IEC 60947-5-1/EN 60947-5-1 Rated operational current le (A) at rated operational voltage Ue 120 V 240 V 380 V 480 V 500 V 600 V 6 3 1,9 1,5 1,4 1,2 6 3 3 1.5 0,6 0,3 125 V 250 V 0,55 0,27 0,22 0,1 www.honeywell.com/sensing VA rating Make Break 7200 720 7200 720 3600 360 432 72 69 28 69 28 83 SAFETY SWITCHES GK Series (continued) Head orientation OPTIONS Opening to front and top 42 / 1.65 32 / 1.26 8/ 0.32 9/ 0.35 31 / 1.22 45,7 1.80 121,6 / 4.79 Opening to right and top 35 / 1.38 60 / 2.36 82 / 3.23 75,9 / 2.99 42,6 / 1.68 o 5,3 / 0.21 7,3 / 0.29 30 / 1.18 5,3 / 0.21 Standard CONDUIT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT PG 13,5 PG 13,5 PG 13,5 20 mm 20 mm 20 mm 20 mm 20 mm 20 mm 20 mm 20 mm CONTACT 1NC/1NO 1NC/1NO 1NC/1NO 4NC 2NC/2NO, BBM 2NC/2NO, BBM 3NC/1NO, BBM 3NC/1NO, BBM 2NC/NO 4NC, low energy 3NC/1NO, BBM, low energy 1NC/1NO, BBM 1NC/1NO, BBM 2NC 2NC/2NO, BBM 1NC/1NO, BBM 2NC 2NC/2NO, BBM 1NC/1NO 1NC/1NO 1NC/1NO 2NC/NO 4NC, low energy 3NC/1NO, BBM, low energy 2NC Single LED indicator KEY 90 Up-down None 90 Straight 90 Straight 90 Straight None None Straight 90 None Straight 90 90 90 Straight 90 None None None None None REFERENCE GKBA1L7 GKBA1L8-F11* GKBA1LX GKBA10L7 GKBA14L6 GKBA14L7 GKBA16L6 GKBA16L7 GKBA2L6 GKBA30LX GKBA36LX GKBA3L6 GKBA3L7 GKBA6LX GKBB14L6 GKBB3L7 GKBB6L7 GKBC14L7 GKBC1L6 GKBC1L7 GKBC1LX GKBC2LX GKBC30LX GKBC36LX GKBC6LX Single LED indicator CONDUIT CONTACT 1/2 NPT 2NC/2NO, BBM 1/2 NPT 1NC/1NO KEY Straight 90 None None Straight Straight 90 Side-side None None None None None None REFERENCE GKCA1L6 GKCA1L7 GKCA1LX GKCA6LX GKCA10L6 GKCA14L6 GKCA14L7 GKCA14L9 GKCA30LX GKCA36LX GKCC1LX GKCC6LX GKCC30LX GKCC36LX KEY 90 REFERENCE GKDA14L7 Double LED indicator CONDUIT CONTACT 1/2 NPT 2NC/2NO, BBM www.honeywell.com/sensing REFERENCE GKCA14M6 22 / 0.87 Single LED indicator CONTACT 1NC/1NO 1NC/1NO 1NC/1NO 2NC 4NC 2NC/2NO, BBM 2NC/2NO, BBM 2NC/2NO, BBM 4NC, low energy 3NC/1NO, BBM, low energy 1NC/1NO 2NC 4NC, low energy 3NC/1NO, BBM, low energy KEY straight Opening to left and top * fluorocarbon seal CONDUIT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 1/2 NPT 20 mm 20 mm 20 mm 20 mm 84 CONDUIT CONTACT 1/2 NPT 2NC/2NO, BBM KEY Straight 90 REFERENCE GKCA14P6 GKCA1P7 Double LED indicator CONDUIT CONTACT 1/2 NPT 2NC/2NO, BBM KEY 90 REFERENCE GKDA14P7 SAFETY SWITCHES GKL/GKR Series Dual Entry Solenoid Key Operated Safety Interlock Switch The GKR (head to the right) and GKL (head to the left) products offer the user an unrivalled range of standard options. The GKR/GKL product is a key actuated device incorporating a key trapping mechanism. The switch is used on machinery where instant stop and access to the machinery is either impossible (due to the momentum of the machine) or impractical (due to tool or machine damage or scrapped product if the current machine cycle is interrupted). The switch incorporates an optional manual override feature which allows removal of the key for emergency access. Over 1000 options are available in a simple to understand part number tree. A safety lockout device is also available for use with the GKR/GKL Series. The lockout device (GKZL2) is specifically designed to prevent a key from being inserted either manually, or by the access door being closed while maintenance personnel are working on the machine. When inserted, the lockout device can accommodate up to four padlocks to prevent unauthorised removal of the device. Mechanical life: up to 1 million Sealing: IP 68, NEMA/UL type 1, 4, 6P, 12,13 Operating temperature: -25 C to 40 C (-13 F to 104 F) Approvals: CE, CSA, UL AC15 A300/A600 DC13 Q300 Contacts: Silver Low energy Gold-plated Switching options: Snap Action Type 11NC/1NO Direct Opening 13 14 21 22 Zb Slow Acting Type 3 1NC/1NO, Break before make (BBM) 21 Type 14/15 2NC/2NO, Break before make (BBM) 11 12 21 22 22 2Y, 2X Zb 13 14 33 34 43 44 2 Slow Acting Type 36 3NC/1NO, Break before make (BBM),low energy Type 40 4NC 11 12 21 22 21 22 31 32 31 32 4Y 41 42 43 44 11 3Y, 1X Type 44 2NC/2NO, Break before make (BBM) 11 12 21 22 2Y,2X 33 34 43 44 12 Type 46 3NC/1NO, Break before make (BBM) 11 12 21 22 31 32 43 44 3Y,1X www.honeywell.com/sensing 85 SAFETY SWITCHES GKL/GKR Series (continued) Key: Type 6 Type 9 Type X Straight Side - side, spring loaded No key Latching mechanism: Type A Mechanical (solenoid unlock with screwdriver) Mechanical (without override) Electrical (solenoid unlock with screwdriver) Type B Type S OPTIONS Opening to front and top 9/ 0.35 Solenoid voltage: Type 2 Type 4 24 Vdc 120 Vac Electrical ratings: Designation & Utilization Category AC15 AC15 AC15 AC14 A600 A300 B300 D300 DC13 DC13 Q300 R300 IEC 60947-5-1/EN 60947-5-1 Rated operational current le (A) at rated operational voltage Ue 120 V 240 V 380 V 480 V 500 V 600 V 6 3 1,9 1,5 1,4 1,2 6 3 3 1.5 0,6 0,3 125 V 250 V 0,55 0,27 0,22 0,1 VA rating Make Break 7200 720 7200 720 3600 360 432 72 69 28 69 28 Left 1/2 in - NPT buna-n seals CONTACT TYPE 3 (1NC/1NO, BBM) 40 (4NC) 46 (3NC, BBM) KEY None None None LATCHING TYPE A A A SOLENOID VOLTAGE 24 Vdc 24 Vdc 24 Vdc REFERENCE SOLENOID VOLTAGE 24 Vdc 24 Vdc REFERENCE GKLE3LXA2 GKLE40LXA2 GKLE46LXA2 Right 1/2 in - NPT buna-n seals 32,5 / 1.28 19 / 0.75 33 / 1.30 CONTACT TYPE 40 (4NC) 46 (3NC, BBM) 31 / 1.22 43,7 / 2 x 7,3 / 1.72 0.29 2 x o 5,3 / 0.21 75 / 2.95 2 x 5,3 / 0.21 100 / 3.94 105,3 / 4.13 110 / 4.33 20 / 0.79 86 43 / 1.69 48,8 / 1.92 65 / 2.56 100 / 3.94 110 / 4.33 www.honeywell.com/sensing KEY None None LATCHING TYPE A A GKRE40LXA2 GKRE46LXA2 SAFETY SWITCHES Opening to left and top Opening to right and top 26 / 1.02 12 / 0.47 Left 1/2 in - NPT buna-n seals Right 1/2 in - NPT buna-n seals CONTACT TYPE 3 (1NC/1NO, BBM) 3 (1NC/1NO, BBM) 3 (1NC/1NO, BBM) 3 (1NC/1NO, BBM) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) KEY None None None None None None None LATCHING TYPE A A S S A A S SOLENOID VOLTAGE 24 Vdc 120 Vac 24 Vdc 120 Vac 24 Vdc 120 Vac 24 Vdc LATCHING TYPE A A S S A A A S S SOLENOID VOLTAGE 24 Vdc 120 Vac 24 Vdc 120 Vac 24 Vdc 24 Vdc 120 Vac 24 Vdc 120 Vac REFERENCE GKRE3MXA2 GKRE3MXA4 GKRE3MXS2 GKRE3MXS4 GKRE36MXA2 GKRE36MXA4 GKRE36MXS2 20 mm - buna-n seals CONTACT TYPE 1 (1NC/1NO) 1 (1NC/1NO) 1 (1NC/1NO) 1 (1NC/1NO) 3 (1NC/1NO, BBM) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) KEY None None None None None None None None None CONTACT TYPE 3 (1NC/1NO, BBM) 3 (1NC/1NO, BBM) 3 (1NC/1NO, BBM) 3 (1NC/1NO, BBM) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) KEY None None None None None None None None LATCHING TYPE A A S S A A S S SOLENOID VOLTAGE 24 Vdc 120 Vac 24 Vdc 120 Vac 24 Vdc 120 Vac 24 Vdc 120 Vac LATCHING TYPE A A S S S A A S S B SOLENOID VOLTAGE 24 Vdc 120 Vac 24 Vdc 120 Vac 24 Vdc 24 Vdc 120 Vac 24 Vdc 120 Vac 24 Vdc REFERENCE GKLE3PXA2 GKLE3PXA4 GKLE3PXS2 GKLE3PXS4 GKLE36PXA2 GKLE36PXA4 GKLE36PXS2 GKLE36PXS4 20 mm - buna-n seals REFERENCE GKRG1MXA2 GKRG1MXA4 GKRG1MXS2 GKRG1MXS4 GKRG3MXA2 GKRG36MXA2 GKRG36MXA4 GKRG36MXS2 GKRG36MXS4 CONTACT TYPE 1 (1NC/1NO) 1 (1NC/1NO) 1 (1NC/1NO) 1 (1NC/1NO) 3 (1NC/1NO, BBM) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) 36 (3NC/1NO, BBM, low energy) 44 (2NC/2NO, BBM) www.honeywell.com/sensing KEY Non None None None None None None None None None REFERENCE GKLG1PXA2 GKLG1PXA4 GKLG1PXS2 GKLG1PXS4 GKLG3PXS2 GKLG36PXA2 GKLG36PXA4 GKLG36PXS2 GKLG36PXS4 GKLG44PXB2 87 SAFETY SWITCHES Keys for GK and GKL/GKR switches Straight key 49,8 / 1.96 8,5 / 0.33 Locking slider bolt with actuating key 77 / 3.03 20 / 0.79 2x o 5,3 / 0.21 14 / 0.55 15 / 0.59 3x HOLE PROVIDED FOR LOCKOUT 19,0 / .75 3/ 0.12 REFERENCE GKZ56 90 key 8,5 / 0.33 14 / 0.55 49,8 / 1.96 2 x o 5,3 / 0.21 40 / 1.57 52 / 2.05 7,0 ,7 / .28 .03 REFERENCE GKZ57 4x o 5,1 / .20 4,93 / .194 26,97 / 36,8 / 1.062 1.45 14,0 / .55 41,81 ,76 / 1.646 .030 Spring-loaded key: up/down 115,87 / 4.562 140,0 ,7 / 5.51 .03 12,04 / .474 13,5 / 0.53 18,5 / 0.73 17,8 / 0.70 37,10 1,52 / 1.460 .060 26,77 1,52 / 1.054 .060 8,5 / 0.33 0key rotation REFERENCE GKZ71 180 key rotation REFERENCE GKZ73 90 key rotation REFERENCE GKZ72 270 key rotation REFERENCE GKZ74 2 X o 5,3 / 0.21 84,9 / 3.34 40 / 30 / 1.57 1.18 14 / 0.55 REFERENCE GKZ58 Spring-loaded key: left/right 8,5 / 0.33 84,9 / 3.34 2 X o 5,3 / 14 / 0.55 0.21 20,5 / 0.81 18,5 / 0.73 13,5 / 0.53 30 / 1.18 40 / 1.57 REFERENCE GKZ59 88 www.honeywell.com/sensing SAFETY SWITCHES CPS Series Cable Pull Safety Switch CPS Series Cable Pull Safety Switches provide a readily accessible emergency stop signal. This is a costeffective means compared to using multiple emergency stop push-buttons. (Cable Pull Safety Switches are not, however, to be used as a means of personnel safeguarding. They may be used to prevent further injury or damage to equipment when used for emergency stop signaling.) The CPS Series Cable Pull Safety switch is designed to provide emergency stop protection for exposed conveyor and assembly lines. The internal mechanism latches on both slackened cable (push) and pulled cable. This capability also enhances productivity by eliminating nuisance stops due to variations in temperature, stretch of cable over time, and other application variables. The 1CPS is intended for use in applications where the cable span is 76 m (250 ft) or shorter. It is an economical solution for shorter runs or zone protection typical to automated systems. The 2CPS series is intended for use in very long cable runs of 152 m (500 ft) or shorter, such as long conveyor lines found in warehouses. The CPS complies with: Low Voltage Directive 73/23/EEC, as amended by directive 93/68/EEC; Machinery Directive 98/37/EEC only as the directives relate to the components being used in a safety function; IEC/EN 60947-1; IEC/EN 60947-5-1; IEC/EN 60947-5-5. Mechanical life: 1 000 000 Sealing: IP67, NEMA 1, 4, 12,13 Operating temperature: 1CPS -25 C to 80 C (-13 F to 176 F) 2CPS -40 C to 80 C (-40 F to 176 F) Approvals: AC15 A300 DC13 Q300 1CPS UL, CSA 2CPS UL, CSA, BG Contacts: 1CPS Silver 1CPS, Low energy Gold plated 2CPS Gold plate over silver Switching options: 1CPS 2CPS 1NC/1NO 21 22 13 14 N/A 2NC/2NO 21 22 21 22 21 22 21 22 13 14 13 14 13 14 13 14 21 22 11 12 21 22 11 12 13 14 21 22 13 14 21 22 11 12 11 12 11 12 11 12 21 22 21 22 21 22 21 22 3NC/1NO 4NC 2CPS contact block mounting: 1 2 1 To housing Removable with heavy duty terminals 2 I I 1CPS indicator Light Code: 2CPS indicator Light Code: No letter A B No letter A B www.honeywell.com/sensing No indicator provided 24 Vdc red LED 120 Vac red LED No indicator provided 24 Vdc red multi-cluster LED 120 Vac red multi-cluster LED 89 SAFETY SWITCHES CPS Series (continued) 1CPS 6,35 [0.25] B 152,4 [6.0] 81,28 [3.2] 1CPS Cable Pull Switch SLACK 88,9 [3.5] TENSIONED 33,02 [1.3] RUN RESET OFF 99,06 [3.9] 172,72 [6.8] 76,2 [3.0] 4X O 7,11 O 0.28 50,8 [2.1] 12,7 [0.5] 117,42 [4.623] A 65,20 [2.567] 56,79 [2.236] 50,83 [2.001] 3X 25,4 [1.0] 2X 26,67 [1.050] A B C D 25,4 [1.00] C 25,4 [1.00] D Fully extended Optional indicator Conduit thread (3 total) Mounting pad (4 total) OPTIONS Cable maintained 1/2 in NPT CONTACT 1NC/1NO 1NC/1NO 1NC/1NO 2NC/2NO 2NC/2NO 2NC/2NO 3NC/1NO 3NC/1NO 3NC/1NO 4NC 1NC/1NO, low energy 2NC/2NO, low energy 2NC/2NO, low energy 2NC/2NO, low energy 3NC/1NO, low energy 4NC, low energy 90 20 mm INDICATOR None 24 V 120 V None 24 V 120 V None 24 V 120 V None None None 24 V 120 V None None REFERENCE 1CPSA1 1CPSA1A 1CPSA1B 1CPSA2 1CPSA2A 1CPSA2B 1CPSA3 1CPSA3A 1CPSA3B 1CPSA4 1CPSA5 1CPSA6 1CPSA6A 1CPSA6B 1CPSA7 1CPSA8 CONTACT 1NC/1NO 1NC/1NO 2NC/2NO 2NC/2NO 2NC/2NO 3NC/1NO 3NC/1NO 4NC 1NC/1NO, low energy 2NC/2NO, low energy 2NC/2NO, low energy 3NC/1NO, low energy 4NC, low energy www.honeywell.com/sensing INDICATOR None 24 V None 24 V 120 V None 24 V None None None 24 V None None REFERENCE 1CPSC1 1CPSC1A 1CPSC2 1CPSC2A 1CPSC2B 1CPSC3 1CPSC3A 1CPSC4 1CPSC5 1CPSC6 1CPSC6A 1CPSC7 1CPSC8 SAFETY SWITCHES 2CPS 40,4 (1.60) 67,8 (2.63) 79,8 (3.14) 92,9 (3.66) 325,9 A (12.75) 152,4 (6.00) 52,1 (2.05) 12,7 (0.50) 18,3 (0.72) SLACK RUN OFF TENSIONED 34,9 (1.38) SLACK TENSIONED 21,1 (0.75) 152,4 (6.00) 2X D 2X 2X 8,9 (0.35) 81,3 (3.20) 40,5 (1.60) 6,9 (0.27) 104,8 (4.13) 2X C B 6,4 (0.25) 2X 31,75 (1.25) 57,2 (2.25) 12,7 (0.50) 2X D C 2X 6,9 (0.27) 3X 21,5 (0.85) 139,7 (5.50) OFF Cable maintained both sides 1/2 in NPT CONTACT 2NC/2NO 2NC/2NO 2NC/2NO 3NC/1NO 3NC/1NO 3NC/1NO 2NC/2NO 2NC/2NO 2NC/2NO 3NC/1NO 3NC/1NO 3NC/1NO CONTACT BLOCK MOUNTING 1 1 1 1 1 1 2 2 2 2 2 2 INDICATOR REFERENCE CONTACT None 24 Vdc 120 Vac None 24 Vdc 120 Vac None 24 Vdc 120 Vac None 24 Vdc 120 Vac 2CPSA1A1 2CPSA1A1A 2CPSA1A1B 2CPSA1B1 2CPSA1B1A 2CPSA1B1B 2CPSA2A1 2CPSA2A1A 2CPSA2A1B 2CPSA2B1 2CPSA2B1A 2CPSA2B1B 2NC/2NO 2NC/2NO 2NC/2NO 3NC/1NO 3NC/1NO 3NC/1NO 2NC/2NO 2NC/2NO 2NC/2NO 2NC/2NO 2NC/2NO 4NC Fully extended Optional indicator C Conduit thread (3 total) D Mounting pad (4 total) INDICATOR REFERENCE None 24 Vdc 24 Vdc 2CPSC1A1 2CPSC1A1A 2CPSC1D1A CONTACT BLOCK MOUNTING 1 1 1 1 1 1 2 2 2 INDICATOR REFERENCE None 24 Vdc 120 Vac None 24 Vdc 120 Vac None 24 Vdc 120 Vac 2CPSA1A2 2CPSA1A2A 2CPSA1A2B 2CPSA1B2 2CPSA1B2A 2CPSA1B2B 2CPSA2A2 2CPSA2A2A 2CPSA2A2B INDICATOR REFERENCE None 24 Vdc 2CPSC1A2 2CPSC1A2A 20 mm CONTACT CONTACT BLOCK MOUNTING 1 1 1 A B No actuation right side, cable maintained left side 1/2 in NPT 20 mm CONTACT SLACK RUN TENSIONED SLACK TENSIONED 244,6 A (9.63) 2NC/2NO 2NC/2NO CONTACT BLOCK MOUNTING 1 1 No actuation left side, cable maintained right side 1/2 in NPT CONTACT 2NC/2NO 2NC/2NO 2NC/2NO 3NC/1NO 3NC/1NO 3NC/1NO 2NC/2NO 2NC/2NO 2NC/2NO CONTACT BLOCK MOUNTING 1 1 1 1 1 1 2 2 2 INDICATOR REFERENCE None 24 Vdc 120 Vac None 24 Vdc 120 Vac None 24 Vdc 120 Vac 2CPSA1A3 2CPSA1A3A 2CPSA1A3B 2CPSA1B3 2CPSA1B3A 2CPSA1B3B 2CPSA2A3 2CPSA2A3A 2CPSA2A3B INDICATOR REFERENCE None 24 Vdc 2CPSC1A3 2CPSC1A3A 20 mm CONTACT 2NC/2NO 2NC/2NO CONTACT BLOCK MOUNTING 1 1 www.honeywell.com/sensing 91 Blank page 92 www.honeywell.com/sensing LINEAR AND ROTARY POSITION Linear and Rotary Position Position sensors respond to the movement or location of a target, such as a molding press slide or a pulley shaft, by producing either a digital or an analogue output correlated to its location. Honeywell position sensors include digital and analogue Hall-effect position sensors, magnetoresistive digital sensors and potentiometric rotary and linear sensors. Sensors are directly compatible with other electronic circuits for application flexibility. With the combined capabilities of three well-known brand names - Data Instruments, Clarostat, Electro and New England Instruments - Honeywell the group continuously strives to remain at the forefront of position sensing technology. In this catalogue we present our range of Linear and Rotary Position transducers and Torque Watch gauges, all suitable for use in industrial environments. www.honeywell.com/sensing 93 LINEAR AND ROTARY POSITION Linear and Rotary Position Transducers Honeywell Sensing and Control manufactures a variety of potentiometric position sensors. The sensors use a tried and true potentiometric technology originally developed for military applications and more recently applied to industrial markets. MystR(R) conductive plastic potentiometric sensors are long-life units designed for rugged industrial applications. The proprietary MystR(R) conductive plastic has an extensive temperature range, infinite resolution and provides absolute position measurement on power-up. Intermediate signal conditioning is not required for normal ratio-metric position sensing. Very small stroke units (5 mm [0.2 in]) and units required to withstand exposure to harsh chemicals or work immersed in many different oils are available. If there is heavy hose down or spray from oil or water, a water resistant or waterproof potentiometer such as the AQ series should be used. Linear products have CE approval, Intrinsically Safe For Class I, II, III, Division 1, Groups A, B, C, D, E, F, G With Entity. Vmax: 30 Vdc, Imax: 100 mA, Ci: 0.0 micro F, Li: 0.0 mH, T4A @ 105 C Ambient. Mechanical life: Approvals: Housing: Element: Shaft: Wiper current: Resolution: LFII Series Longfellow II linear position transducer 1 billion dither operations CE, NEMA 4 - water resistant Anodized aluminium MystR(R) conductive plastic film Stainless steel < 1 uA Infinite 1/4" - 28 NF-2A Thread 7/16" across flats, typ. A A 1.36 (34,5) 1.88 (47,8) "Y" "X" 0.75 0.01 (19,00 0,20) 'X' = Electrical travel + 3.19 in (81,0 mm) 'Y' = Electrical travel - 1.0 in (25,4 mm) 0.50 (12,70) 1.25 (31,80) 0.25 (6,40) 0.62 (15,90) 1.25 (31,80) 0.62 (15,90) The new Longfellow II incorporates design innovations to increase transducer life and provide greater resistance to vibration, while providing a smooth highquality signal for demanding factory control applications. It has a solid stainless steel shaft, longer front-end bearings, a vibration-free damped element, a spring-loaded ball joint and a high precision precious metal wiper. Carrier guides are extruded the full length of the housing to ensure smooth operation even under severe side load conditions. 0.125 (3,175) -65 C to 105 C (-85 F to 221 F) 30 Vdc 0.1 % 0.84 (21,30) 1.00 (25,40) 2.00 (50,80) 0.156 x 0.312 Slot, typ. (3,962 x 7,925) Mounting Feet (2) VIEW A-A 3 Mounting feet show above are for standard LFII models only. Mounting feet are not included with water resistant LFII models. Water resistant LFII models are shipped with brackets. Shaft extended 2 The newly designed internal components provide improvements based on worldwide testing and field experience. Operating temperature: Supply voltage (max.): Linearity: Starting force (max.): Standard Water resistant Backlash (max.): Total Resistance: Shaft O: Termination: Housing length: Mechanical travel: 1.68 (42,70) 1 SCHEMATIC OPTIONS Standard Mating connector, 3718401, sold separately 0,45 kg (1.0 lb) 2,27 kg (5.0 lb) 0,025 mm (0.001 in) 5000 Ohm 1/4 in Connector, Binder Series 681 = Electrical travel + 3.19 in (81,02 mm) = Electrical travel + 0.09 in (2,29 mm) ELECTRICAL TRAVEL (IN (MM)) 6.0 (152,4) 9.0 (228,6) 12.0 (304,8) 14.0 (355,6) 18.0 (457,2) 24.0 (609,6) 30.0 (762,0) 36.0 (914,4) 48.0 (1219,2) REFERENCE LF2S06N5KB6A LF2S09N5KB6A LF2S12N5KB6A LF2S14N5KB6A LF2S18N5KB6A LF2S24N5KB6A LF2S30N5KB6A LF2S36N5KB6A LF2S48N5KB6A Water resistant Mating connector, E02903021, sold separately ELECTRICAL TRAVEL (IN (MM)) 6.0 (152,4) 9.0 (228,6) 12.0 (304,8) 14.0 (355,6) 18.0 (457,2) 24.0 (609,6) 30.0 (762,0) 36.0 (914,4) 48.0 (1219,2) 94 www.honeywell.com/sensing REFERENCE LF2W06N5KB6A LF2W09N5KB6A LF2W12N5KB6A LF2W14N5KB6A LF2W18N5KB6A LF2W24N5KB6A LF2W30N5KB6A LF2W36N5KB6A LF2W48N5KB6A LINEAR AND ROTARY POSITION LFII Metric Series Longfellow II linear position transducer Operating temperature: Supply voltage (max.): Linearity: Starting force (max.): Standard Water resistant Backlash (max.): Total Resistance: Shaft O: Termination: Housing length: Mechanical travel: Dimensions in mm (inches) 19,00 (0.25) -65 C to 105 C (-85 F to 221 F) 30 Vdc 0.1 % 0,45 kg (1.0 lb) 2,27 kg (5.0 lb) 0,025 mm (0.001 in) 5000 Ohm 1/4 in Connector A = Binder Series 681 G = DIN 43650 = Electrical travel + 91,0 mm (3.6 in) = Electrical travel + 2,2 mm (0.09 in) OPTIONS M6X1 34,5 (1.36) Standard - Binder Mating connector, 3718401, sold separately 11,11 (0.48) Across flats 50,8 (2.0) 42,7 (1.68) 47,8 (1.88) 21,3 (0.84) 'Y' 4,1 (0.16) 12,7 (0.50) 6,4 (0.25) 3,962 x 7,925 Slot (0.156 x 0.312) Mounting Feet (2) Mounting feet show above are for standard LFII models only. Mounting feet are not included with water resistant LFII models. Water resistant LFII models are shipped with brackets. 'X' 'X' = Electrical travel + 91 mm (3.6 in) 'Y' = Electrical travel - 25 mm (1.0 in) (EXCEPT for LFII 229: 'Y' = Electrical travel - 29 mm (1.14 in) Shaft 3 extended 2 3 1 REFERENCE LF2S0152M5KB8A LF2S0229M5KB8A LF2S0305M5KB8A LF2S0355M5KB8A LF2S0457M5KB8A LF2S0610M5KB8A LF2S0762M5KB8A LF2S0914M5KB8A LF2S1219M5KB8A Standard - DIN 43650 Mating connector included ELECTRICAL TRAVEL (MM (IN)) 152,4 (6.0) 228,6 (9.0) 304,8 (12.0) 355,6 (14.0) 457,2 (18.0) 609,6 (24.0) 762,0 (30.0) 914,4 (36.0) 1219,2 (48.0) REFERENCE LF2S0152M5KB8G LF2S0229M5KB8G LF2S0305M5KB8G LF2S0355M5KB8G LF2S0457M5KB8G LF2S0610M5KB8G LF2S0762M5KB8G LF2S0914M5KB8G LF2S1219M5KB8G Water resistant - Binder Mating connector, E02903021, sold separately 31,8 (1.25) 0,62 (0.02) 50,8 (2.00) ELECTRICAL TRAVEL (MM (IN)) 152,4 (6.0) 228,6 (9.0) 304,8 (12.0) 355,6 (14.0) 457,2 (18.0) 609,6 (24.0) 762,0 (30.0) 914,4 (36.0) 1219,2 (48.0) 25,4 (1.00) 3,18 (0.125) 31,8 (1.25) 0,62 (0.02) 2 1 Connector end ELECTRICAL TRAVEL (MM (IN)) 152,4 (6.0) 228,6 (9.0) 304,8 (12.0) 355,6 (14.0) 457,2 (18.0) 609,6 (24.0) 762,0 (30.0) 914,4 (36.0) 1219,2 (48.0) REFERENCE LF2W0152M5KB8A LF2W0229M5KB8A LF2W0305M5KB8A LF2W0355M5KB8A LF2W0457M5KB8A LF2W0610M5KB8A LF2W0762M5KB8A LF2W0914M5KB8A LF2W1219M5KB8A Water resistant - DIN 43650 Mating connector included ELECTRICAL TRAVEL (MM (IN)) 152,4 (6.0) 228,6 (9.0) 304,8 (12.0) 355,6 (14.0) 457,2 (18.0) 609,6 (24.0) 762,0 (30.0) 914,4 (36.0) 1219,2 (48.0) www.honeywell.com/sensing REFERENCE LF2W0152M5KB8G LF2W0229M5KB8G LF2W0305M5KB8G LF2W0355M5KB8G LF2W0457M5KB8G LF2W0610M5KB8G LF2W0762M5KB8G LF2W0914M5KB8G LF2W1219M5KB8G 95 LINEAR AND ROTARY POSITION DR Series Durastar rodless linear position transducer 2 3 .65 1.30 [16] [33] 1 The DuraStar rodless linear position transducer is the longest lasting factoryrugged potentiometer. It allows large misalignment of shaft and housing, while providing whisper-quiet operation and smooth, clean signal output. MystR(R) provides the DuraStar excellent durability, especially in dither operation which is so often the determining factor in a potentiometer's life. It is an excellent replacement unit to reduce maintenance operations. The rodless side-sealed DuraStar can also be used to replace a rodded potentiometer in contaminated applications to improve performance while providing long life. Operating temperature: Supply voltage (max.): Linearity: Starting force (max.): Backlash (max.): Shaft: Termination: Mechanical travel: -65 C to 105 C (-85 F to 221 F) 75 Vdc 0.1 % 0,45 kg (1.0 lb) 0,025 mm (0.001 in) M5x0.8 metric thread Connector, DIN 43560 = Electrical travel + 5,0 mm (0.2 in) 0.39 [10] 1.025 [26] .60 [15] M5 x 20 Thread "L" 3.56 [90,4] Mating connector included ELECTRICAL TRAVEL (MM (IN)) 101,6 (4.0) 127,0 (5.0) 152,4 (6.0) 203,2 (8.0) 228,6 (9.0) 304,8 (12.0) 355,6 (14.0) 406,4 (16.0) 457,2 (19.0) 508,0 (20.0) 609,6 (24.0) 762,0 (30.0) 914,4 (36.0) 1016,0 (40.0) 1270,0 (50.0) TOTAL RESISTANCE (OHM) 2000 2000 5000 5000 5000 5000 5000 5000 5000 5000 10000 10000 10000 10000 10000 HOUSING LENGTH (MM (IN)) 250,0 (9.84 ) 280,0 (11.02) 300,0 (11.81) 352,0 (13.86) 375,9 (14.80) 452,1 (17.80) 514,1 (20.24) 553,9 (21.8) 605,0 (23.8) 656,0 (25.83) 757,9 (29.84) 910,0 (35.83) 1062,5 (41.83) 1164,0 (45.83) 1418,0 (55.83) REFERENCE DR04N02KB7G DR05N02KB7G DR06N05KB7G DR08N05KB7G DR09N05KB7G DR12N05KB7G DR14N05KB7G DR16N05KB7G DR18N05KB7G DR20N05KB7G DR24N10KB7G DR30N10KB7G DR36N10KB7G DR40N10KB7G DR50N10KB7G .87 [22] 0.44 [11,2] 1.30 [33] 1.50 [38] 2.68 1.97 [68] [50] .75 [19] 1.46 [37,0] 2.05 [52,07] 2.33 [59,27] 96 www.honeywell.com/sensing M5 X 0.8 Thread 3 1 2 SCHEMATIC DIAGRAM Pin 1 is at the connector end LINEAR AND ROTARY POSITION SLF Series Short Longfellow linear position transducer Operating temperature: Supply voltage (max.): Starting force (max.): Standard Water resistant Backlash (max.): Shaft O: Termination: Housing length: Mechanical travel: The Short Longfellow is frequently used for measuring linear position or displacement up to 6 inches (152,4 mm) on a wide variety of manufacturing and process equipment. The mechanical design of the unit's front bearing, anodized extruded aluminum housing, stainless steel shaft and precious metal wipers are suitable for a factory's harsh environment. Based on the proprietary MystR(R) conductive plastic film, it provides a high resolution, absolute position measurement without external signal conditioners. SLF01 or SLW01 SLF02 or SLW02 SLF03 or SLW03 SLF04 or SLW04 SLF06 or SLW06 -65 C to 105 C (-85 F to 221 F) 40 Vdc 0,45 kg (1.0 lb) 2,27 kg (5.0 lb) 0,025 mm (0.001 in) 1/4 in Connector, Binder Series 681 = Electrical travel + 3.05 in (77,5 mm) = Electrical travel + 0.2 in (5,1 mm) Electrical Travel (in (mm)) 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 6.0 (152,4) Total Resistance (Ohm) 1500 3000 4500 6000 9000 OPTIONS 1 5 0.45 (11.4) 0.90 (22.9) Standard Mating connector, 3718401, sold separately 0.1 % Linearity 0.06 (1.5) 0.45 (11.4) 0.154 (3.91) (2 holes per bracket) 0.90 (22.8) 1.75 (44.5) 0.88 (22.4) Movable mounting brackets 0.19 (4.8) ELECTRICAL TRAVEL 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 6.0 (152,4) REFERENCE SLF01N1500B6A SLF02N3000B6A SLF03N4500B6A SLF04N6000B6A SLF06N9000B6A 1.0 % Linearity ELECTRICAL TRAVEL 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 6.0 (152,4) 0.38 (9.6) 0.68 (17.2) REFERENCE SLF01N1500F6A SLF02N3000F6A SLF03N4500F6A SLF04N6000F6A SLF06N9000F6A X 1.35 (34.4) Water resistant MOUNTING BRACKETS Mating connector, E02903021, sold separately 7/16 in. (6.6) across flats 1/4 in. (6.3) across flats 0.1 % Linearity 3 Shaft Extended 1 1.36 (34.5) ELECTRICAL TRAVEL 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 6.0 (152,4) REFERENCE SLW01N1500B6A SLW02N3000B6A SLW03N4500B6A SLW04N6000B6A SLW06N9000B6A 2 2000 ohm current limiting resistor 1/4-28 NF-2A thread 0.45 (11.4) 1.0 % Linearity ELECTRICAL TRAVEL 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 6.0 (152,4) www.honeywell.com/sensing REFERENCE SLW01N1500F6A SLW02N3000F6A SLW03N4500F6A SLW04N6000F6A SLW06N9000F6A 97 LINEAR AND ROTARY POSITION SLF Metric Series Short Longfellow linear position transducer Operating temperature: Supply voltage (max.): Starting force (max.): Standard Water resistant Backlash (max.): Shaft O: Termination: Housing length: Mechanical travel: 1 5 11.4 22.9 1.5 11.4 3 Shaft Extended 1 3.91 (2 holes per bracket) 0,45 kg (1.0 lb) 2,27 kg (5.0 lb) 0,025 mm (0.001 in) M6x1 metric thread Connector, Binder Series 681 = Electrical travel + 77,5 mm (3.05 in) = Electrical travel + 5,1 mm (0.2 in) Electrical Travel (in (mm)) 25,4 (1.0) 50,8 (2.0) 76,2 (3.0) 101,6 (4.0) 152,4 (6.0) Total Resistance (Ohm) 1500 3000 4500 6000 9000 OPTIONS Standard 22.9 Mating connector, 3718401, sold separately 0.1 % Linearity 2 2000 ohm current limiting resistor SLF025R4 or SLW025R4 SLF050R8 or SLW050R8 SLF076R2 or SLW076R2 SLF101R6 or SLW101R6 SLF152R4 or SLW152R4 -65 C to 105 C (-85 F to 221 F) 40 Vdc ELECTRICAL TRAVEL 25,4 (1.0) 50,8 (2.0) 76,2 (3.0) 101,6 (4.0) 152,4 (6.0) Movable mounting brackets REFERENCE SLF025R4M1500B8A SLF050R8M3000B8A SLF076R2M4500B8A SLF101R6M6000B8A SLF152R4M9000B8A 44.5 1.0 % Linearity 22.2 4.8 9.7 X 6.6 6.3 across across flats flats 17.1 ELECTRICAL TRAVEL 25,4 (1.0) 50,8 (2.0) 76,2 (3.0) 101,6 (4.0) 152,4 (6.0) REFERENCE SLF025R4M1500F8A SLF050R8M3000F8A SLF076R2M4500F8A SLF101R6M6000F8A SLF152R4M9000F8A Water resistant 34.3 Mating connector, E02903021, sold separately 0.1 % Linearity MOUNTING BRACKETS 34.5 M6 x 1 metric thread ELECTRICAL TRAVEL 25,4 (1.0) 50,8 (2.0) 76,2 (3.0) 101,6 (4.0) 152,4 (6.0) REFERENCE SLW025R4M1500B8A SLW050R8M3000B8A SLW076R2M4500B8A SLW101R6M6000B8A SLW152R4M9000B8A 11.4 1.0 % Linearity ELECTRICAL TRAVEL 25,4 (1.0) 50,8 (2.0) 76,2 (3.0) 101,6 (4.0) 152,4 (6.0) 98 www.honeywell.com/sensing REFERENCE SLW025R4M1500F8A SLW050R8M3000F8A SLW076R2M4500F8A SLW101R6M6000F8A SLW152R4M9000F8A LINEAR AND ROTARY POSITION LT Series Linear position transducer, 1/2 in diameter OPTIONS Standard 0.1 % Linearity The LT Series are 1/2 inch diameter, linear position transducers rugged enough to withstand the hostile environment of the factory. The LT can be provided with shaft seals for spray or hose down environments. Operating temperature: Supply voltage (max.): Starting force (max.): Standard Water resistant Backlash (max.): Shaft O: Termination: Housing length: Mechanical travel: LTS01 or LTW01 LTS02 or LTW02 LTS03 or LTW03 LTS04 or LTW04 LTS05 or LTW05 LTS06 or LTW06 LTS07 or LTW07 LTS08 or LTW08 LTS09 or LTW09 LTS10 or LTW10 # 28 Jacketed cable 6.0 (152,4) long min. -40 C to 80 C (-40 F to 176 F) 30 Vdc 28,35 g (1.0 oz) 340,19 g (12.0 oz) 0,00508 mm (0.0002 in) 1/8 in Cable = Electrical travel + 1.50 in (38,10 mm) = Electrical travel + 0.05 in (1,27 mm) Electrical Travel (in (mm)) 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 5.0 (127,0) 6.0 (152,4) 7.0 (177,8) 8.0 (203,2) 9.0 (228,6) 10.0 (254,0) Total Resistance (Ohm) 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 Housing length 'X' (Electrical Travel +1.50 (38,1)) 1" [25,4] (Retracted) 1/8" [3.17] 1/2" [12.7] ELECTRICAL TRAVEL 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 5.0 (127,0) 6.0 (152,4) 7.0 (177,8) 8.0 (203,2) 9.0 (228,6) 10.0 (254,0) REFERENCE LTS01N01KB5C LTS02N02KB5C LTS03N03KB5C LTS04N04KB5C LTS05N05KB5C LTS06N06KB5C LTS07N07KB5C LTS08N08KB5C LTS09N09KB5C LTS10N10KB5C 1.0 % Linearity ELECTRICAL TRAVEL 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 5.0 (127,0) 6.0 (152,4) 7.0 (177,8) 8.0 (203,2) 9.0 (228,6) 10.0 (254,0) REFERENCE LTS01N01KF5C LTS02N02KF5C LTS03N03KF5C LTS04N04KF5C LTS05N05KF5C LTS06N06KF5C LTS07N07KF5C LTS08N08KF5C LTS09N09KF5C LTS10N10KF5C Water resistant 0.1 % Linearity ELECTRICAL TRAVEL 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 5.0 (127,0) 6.0 (152,4) 7.0 (177,8) 8.0 (203,2) 9.0 (228,6) 10.0 (254,0) REFERENCE LTW01N01KB5C LTW02N02KB5C LTW03N03KB5C LTW04N04KB5C LTW05N05KB5C LTW06N06KB5C LTW07N07KB5C LTW08N08KB5C LTW09N09KB5C LTW10N10KB5C 1.0 % Linearity #4-40UNC-2A Thd x .50 (12.7) Long (Black) Ground (Red) V-in Shaft Extended (Brown) V-out Connect to High Impedance Circuit ELECTRICAL TRAVEL 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 5.0 (127,0) 6.0 (152,4) 7.0 (177,8) 8.0 (203,2) 9.0 (228,6) 10.0 (254,0) www.honeywell.com/sensing REFERENCE LTW01N01KF5C LTW02N02KF5C LTW03N03KF5C LTW04N04KF5C LTW05N05KF5C LTW06N06KF5C LTW07N07KF5C LTW08N08KF5C LTW09N09KF5C LTW10N10KF5C 99 LINEAR AND ROTARY POSITION MLT Series Linear position transducer, 3/8 in Diameter Housing length 'X' (Electrical Travel +1.2 [30,48]) 3/4" [19,05] (Retracted) #4-40 UNC-2A Thdx .50 [12,7] long 3/8" [9,53] The MLT Series is 3/8 in diameter linear position transducer that is rugged enough to withstand hostile factory environments. Using a proprietary dual wiper, internal ball joint and the MystR(R) conductive plastic film the MLT provides a usable output at high vibration levels over long periods of time. MLT transducers use precious metal wipers to further enhance reliability. The MLT's 3/8 inch diameter is among the smallest available and can used to replace LVDT's in many applications. Operating temperature: Supply voltage (max.): Starting force (max.): Backlash (max.): Shaft O: Termination: Housing length: Mechanical travel: MLT0R5 MLT001 MLT002 MLT003 MLT004 MLT005 MLT006 -40 C to 80 C (-40 F to 176 F) 30 Vdc 28,35 g (1.0 oz) 0,0127 mm (0.0005 in) 1/8 in Cable = Electrical travel + 1.20 in (30,48 mm) = Electrical travel + 0.05 in (1,27 mm) Electrical Travel (in (mm)) 0.5 (12,7) 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 5.0 (127,0) 6.0 (152,4) Total Resistance (Ohm) 750 1500 3000 4500 6000 7500 9000 (Orange) V-out (Red) V-in Shaft Extended Connect to High Impedance Circuit OPTIONS 0.1 % Linearity ELECTRICAL TRAVEL 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 5.0 (127,0) 6.0 (152,4) REFERENCE MLT002N3000B5C MLT003N4500B5C MLT004N6000B5C MLT005N7500B5C MLT006N9000B5C 0.25 % Linearity ELECTRICAL TRAVEL 1.0 (25,4) REFERENCE MLT001N1500D5C 1.0 % Linearity ELECTRICAL TRAVEL 0.5 (12,7) 1.0 (25,4) 2.0 (50,8) 3.0 (76,2) 4.0 (101,6) 5.0 (127,0) 6.0 (152,4) 100 1/8" [3,18] 3/16 x .063 3 - conductor cable [4,75 x 1,6] #26 AWG [65/44] 12.0 [306] long min. (color coded per schematic) (Black) Ground www.honeywell.com/sensing REFERENCE MLT0R5N0750F5C MLT001N1500F5C MLT002N3000F5C MLT003N4500F5C MLT004N6000F5C MLT005N7500F5C MLT006N9000F5C LINEAR AND ROTARY POSITION AQLT/AQMLT Series Shaftless, waterproof linear position transducer The AQLT and AQMLT are shaftless waterproof linear potentiometers designed to operate in wet/washdown and in-tank environments. The AQ series features an external actuator magnetically coupled to a position feedback element. The magnetic actuator replaces the shaft, found in traditional linear transducers, and eliminates the need for additional stroke length mounting space. Precious metal dual wipers, MystR(R) proprietary conductive plastic, and anodized aluminum housings provide long life and reliable operation in numerous applications. Operating temperature: Supply voltage (max.): Linearity: Starting force (max.): -40 C to 80 C (-40 F to 176 F) 30 Vdc 1.0 % AQMT 56,7 g (2.0 oz) AQMLT 28,35 g (1.0 oz) IP68 Cable Sealing: Termination: AQLT Series AQMLT Series Housing length: Mechanical travel: = Electrical travel + 54,87 mm (2.16 in) = Electrical travel + 2,54 mm (0.1 in) Housing length: Mechanical travel: = Electrical travel + 38,1 mm (1.5 in) = Electrical travel + 2,54 mm (0.1 in) Dimensions are in inches (mm) AREA AVAILABLE FOR CLAMPING WITHOUT RESTRICTING ELECTRICAL OR MECHANICAL TRAVEL 0.20 0.52 (5,1) (13,2) AREA AVAILABLE FOR CLAMPING WITHOUT RESTRICTING ELECTRICAL TRAVEL 0.76 (19,30) 0.20 (5,08) O 0.375 (9,5) O 0.50 (12,7) ELECTRICAL TRAVEL PLUS 1.5 (38,1) MAX 3 WIRE JACKETED CABLE, O 0.14 (3,57) #28 AWG CONDUCTOR 10 FEET LONG (3,05 M) COLOR CODED PER SCHEMATIC ELECTRICAL TRAVEL PLUS 2.16" (54,86) 3 WIRE JACKETED CABLE (9/64 O) #28 AWG CONDUCTOR 10 FEET LONG COLOR CODED PER SCHEMATIC Cable End Black RED BLACK Red Wiper Brown Schematic CABLE END BROWN O 1.125 (28,58) O 0.516 (13,11) O 0.156 (3,96) 0.25 (6,35) Dimensions in inches (mm) O 1.25 (31,75) O 0.156 (3,96) 0.024 (0,61) OFF CENTER O 0.388 (9,78) 0.250 (6,35) 0.125 (3,18) 0.024 (0,60) OFF CENTER 0.50 (12,70) 1.000 (25,40) 1.125 0.010 (28,575 0,25) 120 120 120 120 O 0.813 (20,65) BOLT CIRCLE 1.00 0.010 (25,4 0,25) 0.500 (12,70) O 0.690 (17,53) BOLT CIRCLE #4-40 UNC THD 4 PLACES #4-40 UNC THD 6 PLACES ELECTRICAL TRAVEL (MM (IN)) 152,4 (6.0) 304,8 (12.0) 457,2 (18.0) 609,6 (24.0) 762,0 (30.0) 965,2 (38.0) TOTAL RESISTANCE (OHM) 6000 12000 18000 24000 30000 38000 REFERENCE AQLT06N06KFC AQLT12N12KFC AQLT18N18KFC AQLT24N24KFC AQLT30N30KFC AQLT38N38KFC ELECTRICAL TRAVEL (MM (IN)) 12,7 (0.5) 25,4 (1.0) 76,2 (3.0) 152,4 (6.0) 228,6 (9.0) 304,8 (12.0) www.honeywell.com/sensing TOTAL RESISTANCE (OHM) 750 1500 3000 9000 13500 18000 REFERENCE AQMLTR5N00750FC AQMLT01N01500FC AQMLT03N04500FC AQMLT06N09000FC AQMLT09N13500FC AQMLT12N18000FC 101 LINEAR AND ROTARY POSITION M22 Series Rotary position transducer 3/8-32 UNEF-2A 0.06 (1.57) ( 0.09 2.36) 0.125/.124 ( 3.175/3.150) 60 30 1 R 0.19 (R 4.93) 3 0.406 / 0.401 ( 10.312 / 10.185) 2 0.31 (7.92) 0.06 ( 1.57) 0.06 (1.57) 0.15 (3.81) 0.38 (9.70) 0.38 (9.70) 0.88 ( 22.40) 0.87 .03 (22.00 0.8) The M22 rotary potentiometer, available in servo and bushing mount, utilizes wear-resistant MystR(R) conductive plastic film combined with precious metal wipers to produce a quiet operating, low-noise, stable signal. Gold plated terminals eliminate soldering problems due to tarnish. The high-quality components are packaged in a cost-effective housing designed with an anodized aluminum face plate or nickel-plated brass bushing to handle assembly and operating loads. The integral internal terminations eliminate the need for internal wires which may break under vibration and thermal stress. The M22 series rotary potentiometers are used in position-sensing applications which demand high reliability at low cost. M22B 0.06 (1.5) 0.03 (0.8) 0.38 (9.5) 0.03 (0.8) slot flat 0.062 (1.57) 0.062 (1.57) 0.057 min. (1.44) ( 0.09 2.36) 60 30 1 0.750/.749 ( 19.05/19.025) 3 0.125/.124 ( 3.175/3.150) Operating temperature: Supply voltage (max.): Starting force (max.): Total resistance: Backlash (max.): Shaft O: Termination: Housing size: Bearing type: Mechanical travel: Electrical travel: M22B M22S M22B M22S M22B M22S -40 C to 85 C (-40 F to 185 F) 30 Vdc 0.3 oz in (torque) 1.0 oz in (torque) 2000 Ohm 0.1 3,175 mm (0.125 in) Gold plated solder terminals 22,0 mm (0.87 in) Sleeve 330 Continuous rotation 320 340 2 0.75 max. ( 19.05) 0.50 0.03 (12.70 0.8) OPTIONS Threaded bushing mount LINEARITY 0.5 % 1.0 % REFERENCE M22B2KE1S M22B2KF1S Servo mount LINEARITY 0.25 % 0.5 % 1.0 % 102 REFERENCE M22S2KD1S M22S2KE1S M22S2KF1S www.honeywell.com/sensing 0.50 (12.60) 0.15 (3.81) 0.88 ( 22.40) M22S R 0.19 (R 4.93) LINEAR AND ROTARY POSITION WPM Series Rotary position transducer, servo mount 0.500 0.032 (12.70 0.81) 0.625 (15.88) 0.260 (6.60) 0.68 Rad. max. 30 Ty p. 2 1 0.7500 / 0.7495 Dia. (19.05/19.04) 3 WPM 18-09 0.875 Dia. (22.22) 0.1249 / 0.1246 Dia. (3.172/3.165) MA DE IN U . S. A . 0.062 (1.57) 0.062 (1.57) 0.500 0.032 (12.70.81) The MystR(R) film provides exceptionally long rotational and dither life without sacrificing microlinearity or resolution. The shielded ball bearings ensure long life even with side load conditions. Operating temperature: Supply voltage (max.): Total resistance: Backlash (max.): Shaft O: Termination: Bearing type: Mechanical travel: Approvals: 30 30 0.275 (6.98) Available in servo mount styles, the WPM Series rotary transducer provides long life by utilizing the proprietary MystR(R) conductive plastic film, precious metal wipers and shielded ball bearings on the stainless steel shaft. 0.064 / 0.057 (1.63 / 1.45) 0.78 Rad. max. 0.609 (16.29) 2 0.9688 / 0.9683 Dia. (24.608 / 24.595) 1 0.970 Dia. (24.64) 3 WPM 25-11 0.1249 / 0.1246 Dia. (3.172 / 3.165) 1.062 Dia. (26.97) MA DE IN U . S. A . 0.062 (1.57) -55 C to 125 C (-67 F to 257 F) 60 Vdc 5000 Ohm 0.01 % WPM5KA4* 3,175 mm (0.125 in) WPM5KB1* 6,35 mm (0.25 in) Gold plated solder terminals Ball bearings Continuous rotation MIL-PRF-39023 qulaified 0.062 (1.57) 0.064/0.057 (1.63/1.45) 0.98 Rad. max. (24.9) 0.774 (19.66) 0.500 0.032 (12.70 0.81) 0.093 (2.36) 40 20 0.335 (8.51) 1 1.3125 / 1.3120 Dia. (33.34 / 33.32) WPM 45-13 MA ELECTRICAL TRAVEL 350 353 0.062 (1.57) LINEARITY REFERENCE WPM5KA4S4513 WPM5KA4S6520 . 30 0.333 (8.46) 0.075 % 0.075 % DE IN U.S.A 0.078 (1.98) 1.25 Rad. max. (31.7) 0.800 (20.32) 0.500 0.032 (12.70 0.81) STARTING FORCE (MAX.) 0.8 oz in (torque) 1.0 oz in (torque) 3 0.2497 / 0.2494 Dia. shaft (6.342 / 6.334) OPTIONS A4 2 1.437 Dia. (36.50) 15 0.093 (2.36) 1 2 3 2.000 Dia. (50.80) 1.875 / 1.874 Dia. (47.62 / 47.60) WPM 65-20 0.2497 / 0.2494 Dia. shaft (6.342 / 6.334) B1 ELECTRICAL TRAVEL 340 345 MA STARTING FORCE (MAX.) 0.4 oz in (torque) 0.4 oz in (torque) LINEARITY REFERENCE 0.1 % 0.1 % WPM5KB1S1809 WPM5KB1S2511 DE IN U.S.A . .062 (1.57) .078 (1.98) www.honeywell.com/sensing 103 LINEAR AND ROTARY POSITION Torque Watch Guages The Torque Watch, an industry mainstay when an accurate indication of rotary force is necessary, is simple to use, requiring no special tools or setups. Available in three models they cover ranges from 0.003 to 200 inch-ounces. Attach the gauge to the device being measured, and simply rotate it, for a direct reading dial. Protection against over-torque is provided by a stainless steel internal rotation stop. The low range 366 Series will prevent damage from over-torque up to three times the normal range, whilst the mid range 641 Series and the high range 940 Series will prevent damage up to twice the normal range. Models are available in standard (ounce inch), metric (gram centimeter) and System International (Newton meter) measuring options. 366 Series Low range 0.003 - 0.60 oz in 651 Series Mid range 0.05 - 40.0 oz in 940 Series High range 15.0 - 200.0 oz in The Series 366 Torque Watch accurately measures very low torque. Three miniature adapter chucks allow simple coupling to the device being measured. The Series 651 Torque Watch provides accurate measurement of low static torque. A 1/4 inch keyed chuck provides a simple means of coupling to the device under measurement. The Series 940 Torque Watch accurately measures torque in values that range form 15.0 to 200 oz/in. A 3/8 inch keyed chuck and 3/8 inch square socket driver adapter provide a simple means of coupling to the device under measurement. OPTIONS OPTIONS Standard Standard OUNCE INCHES 0.06 to 0.6 0.01 to 0.1 0.003 to 0.03 REFERENCE 366-0 366-2 366-3 OUNCE INCHES 0.05 to 1.2 1 to 20 2 to 40 0.1 to 2.4 0.25 to 5 0.5 to 10 OPTIONS REFERENCE 651C-1 651C-2 651C-3 651X-2 651X-3 651X-4 Metric GRAM CENTIMETER 6 to 42 1 to 7.5 0.2 to 2 OUNCE INCHES 30 to 200 15 to 100 REFERENCE 940-1 940-2 Metric REFERENCE 366-0M 366-2M 366-3M GRAM CENTIMETER 2.5 K to 14.3 K 1 K to 7.1 K Metric GRAM CENTIMETER 2.5 to 80 50 to 1.2 K 150 to 2.8 K 5 to 150 10 to 300 25 to 600 REFERENCE 651C-1M 651C-2M 651C-3M 651X-2M 651X-3M 651X-4M System International NEWTON METER 0.5 to 9 10 to 140 15 to 285 1 to 18 2 to 36 5 to 70 104 Standard REFERENCE 651C-1SI 651C-2SI 651C-3SI 651X-2SI 651X-3SI 651X-4SI www.honeywell.com/sensing REFERENCE 940-1M 940-2M System International NEWTON METER 0.25 to 1.4 0.1 to 0.7 REFERENCE 940-1SI 940-2SI INDEX LINEAR AND ROTARY POSITION Clarostat Rotary Position Transducers TH100 Series HRS100 Series, Hall-effect The TH-100 Series puts Honeywell's proven variable-resistor technology to work in angle-management applications such as control-lever sensing and equipment position feedback. High performance and low cost make it attractive for a wide range of applications. Special electrical and mechanical configurations, including dual tracks, D-shape rotor holes, etc. are available on special order. The HRS100 provides angular position information for a variety of sensing and control applications in the automotive, marine, truck, off-road, industrial implementation, aerospace, and rail industries. The use of magnetically coupled information in place of a mechanical wiper assembly provides a long life, cost-effective solution for harsh environments that include temperature, vibration, dither, moisture and dirt. The device provides for angle measurements, has 152,4 mm (6.0 in) wire leads, a 6,35 mm (0.25 in) slotted thru hole and is sealed. This position sensor incorporates Hall-effect to provide a sensing device that will last for more than 50 million operations. The device is packaged in a metal housing with a 9,5 mm (0.375 in) diameter bushing and a 6,35 mm (0.25 in) diameter slotted shaft and solder lug terminals. Power rating: 0.5 W max. Element type: Conductive plastic Terminal type: three 20 AWG Shaft: 6,35 mm (0.25 in) thru hole with .105 w x .090 d slot Body: 38,1 mm (1.5 in) x 45,72 mm (1.8 in) Electrical taper: Linear Storage & operating temperature: -40 C to 120 C (-40 F to 248 F) Working voltage (max): 350 Vdc Linearity: 5% standard; to 1% special Total resistance: 10 K Total resistance tolerance: 15% Rotational cycles: > 1 million Terminal type: Bushing: Shaft: Body: Electrical taper: Operating temperature: Supply voltage (max): Linearity: Rotational cycles: Mechanical operating angle: Straight solder lug 9,52 mm (.375 in) FMS, includes C-ring Slotted 6,32 mm 0,03 (0.249 in 0.001) 27,79 mm (1.094 in) O Linear -40 C to 85 C (-40 F to 185 F) 5 Vdc 2% 10 million 90 Mounting Surface 27,69 [1.09] 13,2 [0.52] 20,32 [0.08] 9,53 [0.375] 22,23 [0.875] GRD VDD 2,84 [0.12] Output OPTIONS OPTIONS 180 Rotation 90 Rotation TAPER Linear CABLE CONNECTOR No REFERENCE 640CS103A06NAAY CABLE CONNECTOR No REFERENCE 640ES103A06NAAY SHAFT Slotted LUG Straight Solder 3.3 [0.13] 19,05 [0.75] REFERENCE HRS100SSAB090 90 Rotation TAPER Linear www.honeywell.com/sensing 105 LINEAR AND ROTARY POSITION Clarostat Rotary Potentiometers and Position Transducers 578 Series, Precision potentiometer 574 Series, Commercial potentiometer The 578 Series conductive plastic precision potentiometer puts Honeywell's proven variable resistor technology to work in a high performance, costeffective device. With its compact size, rugged construction and advanced versatility, the 578 provides superior control for applications such as joy-stick controllers and position-sensing devices. The 574 Series conductive plastic potentiometer offers low mounting profile, smooth feel, and robust construction with a thermoplastic housing, bushing, and shaft. Terminals are PC style with a bracket for vertical mounting. No hardware is included. The model 578 features a 9,5 mm x 9,5 mm (0.375 in x 0.375 in) bushing, 6,35 mm x 19,05 mm (0.25 in x 0.75 in) slotted shaft, linear taper, and type A pc pins (please consult with the factory for custom OEM configurations). Power rating: Element type: Terminal type: Bushing: Shaft: Body: Electrical taper: Operating temperature: Working voltage: Linearity: Total resistance tolerance: Rotational cycles: Mechanical rotation: Power rating: Element type: Terminal type: Bushing: Shaft: Body: Electrical taper: Operating temperature: Working voltage: Linearity: Total resistance tolerance: Revolutions: Mechanical rotation: 0.5 W @ 70 C (158 F) Conductive plastic PC pin type A 9,52 mm (0.375 in) D x 9,52 mm (0.375 in) L 6,35 mm x 19,05 mm (0.25 in x 0.75 in) Slotted 22,86 mm (0.900 in) O Linear -40 C to 100 C (-40 F to 212 F) 400 Vdc 1% 10% 5 million 320 5 0.25 W @ 70 C (158 F) Conductive plastic PC terminals type C with C mounting bracket M9 x 6,35 mm (0.25 in) L 6,35 (0.25 in) O x 19,05 (0.75 in) L 21,08 mm (0.830 in) square Linear -40 C to 120 C (-40 F to 248 F) 350 Vac 5% 20% 50,000 300 5 8,13 [0.32] 21,09 0,13 [0.83 0.005] 11,08 [0.46] PC Terminals Type C-30 10,54 [0.415] 3,96 [0.156] 8,71 [0.343] O22,96 [O 0.90 ] .010 O 6,35 [O 0.25] 3,96 [0.156] 9,22[0.363] Type "C" Mtg. With Bracket CL 12,16 0,25 [0.48 0.01] 14,49 0,25 [0.57 .010] 3/8-32 UNEF T OPTIONS CW W CCW 5,84 15,24 0,25 [0.60 .01] 3,3 0,25 [0.13 .01] 1,02 0,25 [0.04 .01] 5,08 0,25 [0.20 .010] (2X) ANTI-ROTATIONAL PIN O 1,52 0,13 [O 0.06 .005] Flatted Shaft 30 CL 19,05 0,25 [0.075 .010] (2X) TYPE "A" MOUNTING OPTIONS RESISTANCE 1 kOhm 10 kOhm 100 kOhm 50 kOhm TAPER Linear Linear Linear Linear REFERENCE 574SX1M48F102SD 574SX1M48F103SD 574SX1M48F104SD 574SX1M48F503SD TAPER Linear Linear Linear Linear REFERENCE 574SX1M48S102SD 574SX1M48S103SD 574SX1M48S104SD 574SX1M48S503SD 1 kOhm Resistance SHAFT Slotted stainless steel RESISTANCE TAPER Linear REFERENCE 578X1G48S102SA RESISTANCE 1 kOhm 10 kOhm 100 kOhm 50 kOhm 5 kOhm Resistance SHAFT Slotted stainless steel Slotted Shaft RESISTANCE TAPER Linear REFERENCE 578X1G48S502SA RESISTANCE TAPER Linear REFERENCE 578X1G48S103SA 10 kOhm Resistance SHAFT Slotted stainless steel 106 www.honeywell.com/sensing LINEAR AND ROTARY POSITION 575 Series, Commercial potentiometer 590 Series, Commercial potentiometer The 575 Series conductive plastic potentiometer offers a smooth feel and robust construction, with a thermoplastic housing, bushing, and shaft. Terminals are solder-hook style for panel mounting. No hardware is included. The 590 Series conductive plastic modular potentiometer features low electrical noise, smooth feel, robust construction, and brass bushing and shaft. Terminals are PC style. Hardware included. Multiple sections(up to three) are available on special order. Power rating: Element type: Terminal type: Bushing: Shaft: Body: Electrical taper: Operating temperature: Working voltage: Linearity: Total resisteance tolerance: Rotational cycles: Mechanical rotation: 0.5 W @ 70 C (158 F) Conductive plastic Solder hook-200 grid 9,52 mm (.375 in) D x 6,35 mm (0.25 in) L 6,35 mm (0.25 in) O x 19,05 mm (0.75 in) L 21,08 mm (0.830 in) square Linear -40 C to 120 C (-40 F to 248 F) 350 Vac 5% 20% 50,000 300 5 Power rating: 0.5 W @ 70 C (158 F) Element type: Conductive plastic Terminal type: PC, 6,35 mm (0.25 in) long Bushing: 6,35 mm (0.25 in) O x 6,35 mm (0.25 in) L Shaft: Slotted, 3,17 mm (0.125 in) O x 22,23 mm (0.875 in) L Body: 12,7 mm (0.50 in) O Electrical taper: Linear Operating temperature: -40 C to 120 C (-40 F to 248 F) Linearity: 5% Total resistance tolerance: 10% (up to 500 kOhms) 20 % (1 MOhm and over) Rotational cycles: 50,000 Mechanical rotation: 295 5 OPTIONS Flatted Shaft RESISTANCE 1 kOhm 10 kOhm 50 kOhm TAPER Linear Linear Linear REFERENCE 575SX1A48F102SS 575SX1A48F103SS 575SX1A48F503SS Slotted Shaft RESISTANCE 1 kOhm 10 kOhm 50 kOhm TAPER Linear Linear Linear REFERENCE 575SX1A48S102SS 574SX1A48S103SS 574SX1A48S503SS OPTIONS Slotted Shaft RESISTANCE 100 Ohm 500 Ohm 1 kOhm 5 kOhm 10 kOhm 100 kOhm 500 kOhm 1 MOhm www.honeywell.com/sensing TAPER Linear Linear Linear Linear Linear Linear Linear Linear REFERENCE 590SX1N56S101SP 590SX1N56S501SP 590SX1N56S102SP 590SX1N56S502SP 590SX1N56S103SP 590SX1N56S104SP 590SX1N56S504SP 590SX1N56S105SP 107 LINEAR AND ROTARY POSITION Clarostat Rotary Potentiometers and Position Transducers (continued) 380 Series, Industrial potentiometer The 380 Series "Quiet One" is a 2-watt conductive plastic potentiometer offering superior dynamic noise and a long rotational life. It meets MIL-R-94 specifications where applicable. Approvals: Power rating: Element type: Terminal type: Shaft: Body: Electrical taper: Operating temperature: Working voltage: Linearity: Total resistance tolerance: MIL-R-94 2.0 W max. Conductive plastic Solder lug Slotted 27,79 mm (1.094 in) O Linear -55 C to 120 C (-67 F to 248 F) 500 Vdc 5% 10% (up to 500 kOhms) 20 % (1 MOhm and over) 100,000 312 3 Rotational cycles: Mechanical rotation: OPTIONS C1: 2.0 in (50,8 mm) Round Shaft; 0.375 in (9,5 mm) L bushing 27,78 [ 1.09 ] 14,27 [ 0.56 ] C2 15,87 [ 0.625 ] RESISTANCE 250 Ohm 1 kOhm 5 kOhm 10 kOhm 25 kOhm 50 kOhm 100 kOhm 250 kOhm 1 MOhm REFERENCE 380C2250 380C21000 380C25000 380C210K 380C225K 380C250K 380C2100K 380C2250K 380C21MEG C3: 0.875 in (22,23 mm) shaft; 0.375 in (9,5 mm) L bushing 50,8 [ 2.0 ] C2: 0.625 in (15,88 mm) screwdriver slotted shaft; 0.5 in (12,7 mm) L locking bushing 6,35 [ .025 ] 27,78 [ 1.09 ] 14,27 C1 RESISTANCE 100 Ohm 250 Ohm 500 Ohm 1 kOhm 1.5 kOhm 2 kOhm 2.5 kOhm 5 kOhm 10 kOhm 15 kOhm 20 kOhm 25 kOhm 50 kOhm 100 kOhm 200 kOhm 250 kOhm 500 kOhm 1 MOhm 108 27,78 [ 0.56 ] [ 1.09 ] 22,23 [ 0.875 ] REFERENCE 380C1100 380C1250 380C1500 380C11000 380C11500 380C12000 380C12500 380C15000 380C110K 380C115K 380C120K 380C125K 380C150K 380C1100K 380C1200K 380C1250K 380C1500K 380C11MEG 14,27 C3 RESISTANCE 100 Ohm 250 Ohm 500 Ohm 1 kOhm 2 kOhm 2.5 kOhm 5 kOhm 10 kOhm 25 kOhm 50 kOhm 100 kOhm 150 kOhm 200 kOhm 250 kOhm 500 kOhm 1 MOhm 5 MOhm www.honeywell.com/sensing [0.56 ] REFERENCE 380C3100 380C3250 380C3500 380C31000 380C32000 380C32500 380C35000 380C3310K 380C325K 380C350K 380C3100K 380C3150K 380C3200K 380C3250K 380C3500K 380C31MEG 380C35MEG LINEAR AND ROTARY POSITION RV4 MIL Series potentiometer The RV4 is a dual-marked potentiometer with all the fine features of the 380 Series in a more economical package. It is built in strict accordance with MIL-R-94. Approvals: Power rating: Element type: Terminal type: Shaft: Body: Electrical taper: Operating temperature: Working voltage: Linearity: Rotational cycles: Mechanical rotation: MIL-R-94 2.0 W max. Conductive plastic Solder lug Slotted 27,79 mm (1.094 in) O Linear -55 C to 120 C (-67 F to 248 F) 500 Vdc 5% 25,000 312 3 OPTIONS Locking Bushing Standard Bushing, 0.875 in (22,23 mm) shaft length RESISTANCE 100 Ohm 250 Ohm 500 Ohm 1 kOhm 2.5 kOhm 5 kOhm 10 kOhm 25 kOhm 50 kOhm 100 kOhm 250 kOhm 500 kOhm 750 Kohm 1 MOhm 5 MOhm TOLERANCE 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% REFERENCE RV4NAYSD101A RV4NAYSD251A RV4NAYSD501A RV4NAYSD102A RV4NAYSD252A RV4NAYSD502A RV4NAYSD103A RV4NAYSD253A RV4NAYSD503A RV4NAYSD104A RV4NAYSD254A RV4NAYSD504A RV4NAYSD754A RV4NAYSD105A RV4NAYSD505B RESISTANCE 100 Ohm 250 Ohm 500 Ohm 1 kOhm 2.5 kOhm 5 kOhm 10 kOhm 25 kOhm 50 kOhm 100 kOhm 250 kOhm 500 kOhm 750 kOhm 1 MOhm 5 MOhm www.honeywell.com/sensing TOLERANCE 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% REFERENCE RV4LAYSA101A RV4LAYSA251A RV4LAYSA501A RV4LAYSA102A RV4LAYSA252A RV4LAYSA502A RV4LAYSA103A RV4LAYSA253A RV4LAYSA503A RV4LAYSA104A RV4LAYSA254A RV4LAYSA504A RV4LAYSA754A RV4LAYSA105A RV4LAYSA505B 109 LINEAR AND ROTARY POSITION Clarostat Rotary Potentiometers and Position Transducers (continued) RV6/392M MIL Series potentiometer RV6/392M Series are economical potentiometers designed to meet wave soldering applications for mounting PC boards. They meet flow solderability and washability test requirements, and MIL-R-94 standard apply. Approvals: Power rating: Element type: Terminal type: Shaft: Body: Electrical taper: Operating temperature: Working voltage: Linearity: Total resistance tolerance: Rotational cycles: Mechanical rotation: MIL-R-94 0.5 W max. Conductive plastic Solder hook Slotted 12,7 mm (0.5 in) O Linear -40 C to 120 C (-40 F to 248 F) 350 Vdc 5% 10% (up to 500 kOhms) 20 % (1 MOhm and over) 50,000 295 5 3,18 [0.125] Dia. 12,7 [0.5] Dia. Locking Bushing Type Type RV6 110 Bushing Shaft Length Length 6,35 22,23 0.25 0.875 Standard Bushing, 6,35 mm (0.25 in) L; 0.875 in (22,23 mm) shaft length RESISTANCE 100 Ohm 250 Ohm 500 Ohm 1 kOhm 2.5 kOhm 5 kOhm 10 kOhm 25 kOhm 50 kOhm 100 kOhm 250 kOhm 500 kOhm 1 MOhm REFERENCE RV6NAYSD101A RV6NAYSD251A RV6NAYSD501A RV6NAYSD102A RV6NAYSD252A RV6NAYSD502A RV6NAYSD103A RV6NAYSD253A RV6NAYSD503A RV6NAYSD104A RV6NAYSD254A RV6NAYSD504A RV6NAYSD105A Locking Bushing, 12,7 mm (0.50 in) L; 0.625 in (15,88 mm) shaft length 15,88 0,76 [0.625 0.03] 12,7 0,5 [0.5 0.02] OPTIONS RV6/392M RESISTANCE 100 Ohm 250 Ohm 500 Ohm 1 kOhm 2.5 kOhm 5 kOhm 10 kOhm 25 kOhm 50 kOhm 100 kOhm 250 kOhm 500 kOhm 1 MOhm www.honeywell.com/sensing REFERENCE RV6LAYSA101A RV6LAYSA251A RV6LAYSA501A RV6LAYSA102A RV6LAYSA252A RV6LAYSA502A RV6LAYSA103A RV6LAYSA253A RV6LAYSA503A RV6LAYSA104A RV6LAYSA254A RV6LAYSA504A RV6LAYSA105A LINEAR AND ROTARY POSITION 53 Series potentiometer 585 Series, Commercial potentiometer The 53 Series has all the fine features of the Series 380 in a more economical package. It is available with a 50,8 mm [2.0 in] long shaft. Our Series 585 offers a robust construction in a low-cost commercial package, using carbon composition elements and a metal shaft and bushing. Power rating: Element type: Terminal type: Shaft: Body: Electrical taper: Operating temperature: Working voltage: Linearity: Rotational cycles: Mechanical rotation: Power rating: 0.05 W max. @ 40 C Element type: Carbon composition Terminal type: 3 in-line Bushing: M 7 x 0.75 thread, 7 mm L Shaft: 6,0 mm (0.24 in) O by 25,0 mm (0.98 in) L Flatted shaft: 12,0 mm (0.47 in) long by 4,5 mm (0.18 in) D standard; round end available Body: 9,5 mm (0.37 in) square Operating temperature: -55 C to 120 C (-67 F to 248 F) Resistance tolerance: 20% Rotational cycles: 10,000 Mechanical rotation: 300 2.0 W max. Conductive plastic Solder lug Slotted, 50,8 mm (2.0 in) L 27,79 mm (1.094 in) O Linear -55 C to 120 C (-67 F to 248 F) 500 Vdc 5% 25,000 312 3 OPTIONS Standard Bushing, 2.0 in (50,8 mm) shaft length RESISTANCE 100 Ohm 250 Ohm 500 Ohm 1 kOhm 2.5 kOhm 5 kOhm 10 kOhm 25 kOhm 50 kOhm 100 kOhm 150 kOhm 250 kOhm 500 kOhm 750 kOhm 1 MOhm 2.5 MOhm 5 MOhm TOLERANCE 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 20% 20% REFERENCE 53C1100 53C1250 53C1500 53C11K 53C12500 53C15K 53C110K 53C125K 53C150K 53C1100K 53C1150K 53C1250K 53C1500K 53C1750K 53C11MEG 53C12.5MEG 53C15MEG OPTIONS Linear taper RESISTANCE 1 kOhm 5 kOhm 10 kOhm 1 kOhm 5 kOhm 10 kOhm SECTION Single Single Single Double Double Double REFERENCE 585SX4Q25F102SP 585SX4Q25F502SP 585SX4Q25F103SP 585DX4Q25F102SP 585DX4Q25F502SP 585DX4Q25F103SP SECTION Single Single Single REFERENCE 585SX4Q25F102ZP 585SX4Q25F502ZP 585SX4Q25F103ZP Audio taper RESISTANCE 1 kOhm 5 kOhm 10 kOhm www.honeywell.com/sensing 111 LINEAR AND ROTARY POSITION Encoders 510 Series , Mechanical 600 Series, Optical The 510 Series controls are manually operated, rotary, mechanical encoders that provide a two-bit gray code for relative reference applications and a fourbit gray code for absolute electrical reference applications. The "L" channel leads the "R" channel by 90 electrically in the CW position. It features continuous electrical travel and has a rotational life of more than 100,000 shaft revolutions with a positive detent feel. The 600 Series controls are manually operated, rotary, optical encoders that output two square waves in quadrature at a rate of 128 pulse per channel per revolution as a standard with other resolutions down to 60 pulses available. The outputs are TTL compatible. PC terminals or cable leads are available. This series is small-sized, 21,08 mm2 by 8,71 mm deep (0.83 in2 x 0.343 in) long and commonly used in limited-space, panel-mounted applications where the need for costly, front-panel displays can be completely eliminated. Digital gray-code outputs eliminate the need for A/D converters. Pulses per revolution: 128 Supply voltage: 5.0 V Body: 34,93 mm (1.375 in) O Shaft: 6.35 mm [0.25 in] dia by 22.23 mm [0.875] long Bushing: 9,52 mm [0.375 in] dia by 9,52 mm [0.375 in] long Operating temperature: -40 C to 65 C (-40 F to 149 F) Revolutions: 10 million Bushing: 9,52 mm (0.375 in) O x 6,35 mm (0.25 in) L Shaft: Flatted, 6,35 mm (0.25 in) O x 19,05 mm (0.75 in) L Body: 21,08 mm (0.830 in) square Operating temperature: -40 C to 105 C (-40 F to 221 F) Rotational cycles: 100,000 1,91 [0.075] 17,5 [0.69] 0,64 x 3,05 12,2 [0.48] "A" 12 34 [0.025 x 0.012] 1,27 typ. [0.05 Typ.] OPTIONS Series 600 TERMINATION 177,8 mm (7.0 in) long cable PC terminals exiting side PC terminals exiting rear 177,8 mm (7.0 in) long cable with connector OPTIONS Vertical Mount, PC Terminals/bent back GREY CODE OPTIONS 2 bit/4 cycles 2 bit/6 cycles 2 bit/9 cycles 4 bit/16 cycles REFERENCE 510E1A48F204PC 510E1A48F206PC 510E1A48F209PC 510E1A48F416PC Horizontal Mount, PC Terminals/straight GREY CODE OPTIONS 2 bit/4 cycles 2 bit/6 cycles 2 bit/9 cycles 4 bit/16 cycles REFERENCE 510E1A48F204PB 510E1A48F206PB 510E1A48F209PB 510E1A48F416PB Brackets MOUNTING DIRECTION Vertical Horizontal 112 REFERENCE 510VBKT 510HBKT www.honeywell.com/sensing REFERENCE 600EN-128-CBL 600EN-128-B66 600EN-128-C24 600EN-128-CN1 LINEAR AND ROTARY OPTO POSITION SENSORS Slotted Optical Switches S-180 Series S-510 Series The S-180 Series consists of a gallum arsenide IRED and silicon phototransistor mounted in a rigid one-piece polycarbonate housing. All electrical options are available with either PCB mount or 457,0 mm (18.0 in) minimum length wire termination (26 AWG type UL 1429) The S-510 Series consists of a gallum arsenide IRED and silicon phototransitor mounted in a small injection-molded housing. An IR-opaque housing is offered for applications where high levels of ambient infrared radiation may be present and an IR-transparent housing for applications requiring protection from dust and dirt in the apertures. This series is also available with 305,0 mm (12.0 in) minimum length flexible wire leads. Operating temperature: IRED continuous forward current: IRED peak forward current: IRED reverse voltage: IRED power dissipation: Sensor collector-emitter voltage: Sensor emitter-collector voltage: Sensor power dissipation: -40 C to 85 C (-40 F to 185 F) 50 mA 3A 3V 100 mW 30 V 5V 100 mW Operating temperature: IRED continuous forward current: IRED peak forward current: IRED reverse voltage: IRED power dissipation: Sensor collector-emitter voltage: Sensor emitter-collector voltage: Sensor power dissipation: -40 C to 85 C (-40 F to 185 F) 50 mA 3A 3V 100 mW 30 V 5V 100 mW OPTIONS PCB Mount VCE(sat) 0.4 V max @ IF = 20 mA, IC = 0.4 mA 0.4 V max @ IF = 10 mA, IC = 0.8 mA 0.4 V max @ IF = 20 mA, IC = 2.0 mA IL 0.5 mA min @ IF = 20 mA and VCE = 5 V 1.0 mA min @ IF = 10 mA and VCE = 5 V 2.0 mA min @ IF = 20 mA and VCE = 5 V REFERENCE S-180-A55 S-180-B55 S-180-C55 IR-opaque housing TERMINATION PC Board mount Wire PC Board mount Wire Wire Leads VCE(sat) 0.4 V max @ IF = 20 mA, IC = 0.4 mA 0.4 V max @ IF = 10 mA, IC = 0.8 mA 0.4 V max @ IF = 20 mA, IC = 2.0 mA OPTIONS IL 0.5 mA min @ IF = 20 mA and VCE = 5 V 1.0 mA min @ IF = 10 mA and VCE = 5 V 2.0 mA min @ IF = 20 mA and VCE = 5 V REFERENCE S-180-A55W S-180-B55W S-180-C55W ELECTRICAL SELECTION A A B B REFERENCE S-510-A S-510-AW S-510-B S-510-BW IR-transparent housing TERMINATION PC Board mount Wire PC Board mount Wire ELECTRICAL SELECTION A A B B REFERENCE S-511-A S-511-AW S-511-B S-511-BW PARAMETER A IL 0.5 mA @ IF = 20 mA and VCE = 5 V 1.0 mA @ IF = 35 mA and VCE = 5V VCE(sat) 0.4 V max @ IF = 20 mA and IC = 0.25 mA 0.4 V max @ IF = 35 mA and IC = 0.50 mA B 1.0 mA @ IF = 20 mA and VCE = 5 V 2.0 mA @ IF = 35 mA and VCE = 5V 0.4 V max @ IF = 20 mA and IC = 0.50 mA 0.4 V max @ IF = 35 mA and IC = 1.0 mA www.honeywell.com/sensing 113 LINEARSENSORS AND ROTARY POSITION OPTO Slotted Optical Switches (continued) OPTIONS S-860/870 Series IR Transparent; 5,59 mm (0.220 in) Lead spacing; IRED aperture, 1,27 mm (0.05 in) The S-860/870 family of optical switches offers the designer the most flexible semi-custom specification available in commercial optoelectronics. Electrical, optical and mechanical parameters may be specified allowing the use of this standard product in many applications that would otherwise have to be custom designed. Operating temperature: IRED continuous forward current: IRED peak forward current: IRED reverse voltage: IRED power dissipation: Sensor collector-emitter voltage: Sensor emitter-collector voltage: Sensor power dissipation: -25 C to 85 C (-13 F to 185 F) 50 mA 3A 3V 100 mW 30 V 5V 100 mW ELECTRICAL PARAMETER A B C A B C A B C A B C MOUNTING/SENSOR No Tabs/0,25 mm (0.01 in) No Tabs/0,25 mm (0.01 in) No Tabs/0,25 mm (0.01 in) No Tabs/1,27 mm (0.05 in) No Tabs/1,27 mm (0.05 in) No Tabs/1,27 mm (0.05 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/1,27 mm (0.05 in) 2 Tabs/1,27 mm (0.05 in) 2 Tabs/1,27 mm (0.05 in) REFERENCE S-865-N51 S-866-N51 S-867-N51 S-865-N55 S-866-N55 S-867-N55 S-865-T51 S-866-T51 S-867-T51 S-865-T55 S-866-T55 S-867-T55 IR Transparent; 8,13 mm (0.320 in) Lead spacing; IRED aperture, 1,27 mm (0.05 in) ELECTRICAL PARAMETER A B C A B C A B C A B C MOUNTING/SENSOR No Tabs/0,25 mm (0.01 in) No Tabs/0,25 mm (0.01 in) No Tabs/0,25 mm (0.01 in) No Tabs/1,27 mm (0.05 in) No Tabs/1,27 mm (0.05 in) No Tabs/1,27 mm (0.05 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/1,27 mm (0.05 in) 2 Tabs/1,27 mm (0.05 in) 2 Tabs/1,27 mm (0.05 in) REFERENCE S-860-N51 S-861-N51 S-862-N51 S-860-N55 S-861-N55 S-862-N55 S-860-T51 S-861-T51 S-862-T51 S-860-T55 S-861-T55 S-862-T55 IR Opaque; 5,59 mm (0.220 in) Lead spacing; IRED aperture, 1,27 mm (0.05 in) ELECTRICAL PARAMETER A B C A B C A B C A B C MOUNTING/SENSOR No Tabs/0,25 mm (0.01 in) No Tabs/0,25 mm (0.01 in) No Tabs/0,25 mm (0.01 in) No Tabs/1,27 mm (0.05 in) No Tabs/1,27 mm (0.05 in) No Tabs/1,27 mm (0.05 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/1,27 mm (0.05 in) 2 Tabs/1,27 mm (0.05 in) 2 Tabs/1,27 mm (0.05 in) REFERENCE S-875-N51 S-876-N51 S-877-N51 S-875-N55 S-876-N55 S-877-N55 S-875-T51 S-876-T51 S-877-T51 S-875-T55 S-876-T55 S-877-T55 IR Opaque; 8,13 mm (0.320 in) Lead spacing; IRED aperture, 1,27 mm (0.05 in) PARAMETER A IL 0.5 mA @ IF = 20 mA and VCE = 5 V VCE(sat) 0.4 V max @ IF = 20 mA and IC = 0.4 mA B 1.0 mA @ IF = 10 mA and VCE = 5 V 0.4 V max @ IF = 10 mA and IC = 0.8 mA C 2.0 mA @ IF = 20 mA and VCE = 0.4 V 0.4 V max @ IF = 20 mA and IC = 2.0 mA 114 ELECTRICAL PARAMETER A B C A B C A B C A B C www.honeywell.com/sensing MOUNTING/SENSOR No Tabs/0,25 mm (0.01 in) No Tabs/0,25 mm (0.01 in) No Tabs/0,25 mm (0.01 in) No Tabs/1,27 mm (0.05 in) No Tabs/1,27 mm (0.05 in) No Tabs/1,27 mm (0.05 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/0,25 mm (0.01 in) 2 Tabs/1,27 mm (0.05 in) 2 Tabs/1,27 mm (0.05 in) 2 Tabs/1,27 mm (0.05 in) REFERENCE S-870-N51 S-871-N51 S-872-N51 S-870-N55 S-871-N55 S-872-N55 S-870-T51 S-871-T51 S-872-T51 S-870-T55 S-871-T55 S-872-T55 LINEAR AND ROTARY OPTO POSITION SENSORS S-800W Series, Wide gap The S-800W Series of wide gap slotted switches consists of a gallium arsenide IRED and silicon phototransistor in an injection-molded housing. The output current range options allow the design engineer the flexibility to choose from three current minimums to best solve application requirements. Operating temperature: IRED continuous forward current: IRED peak forward current: IRED reverse voltage: IRED power dissipation: Sensor collector-emitter voltage: Sensor emitter-collector voltage: Sensor power dissipation: -40 C to 80 C (-40 F to 176 F) 50 mA 3A 3V 100 mW 30 V 5V 100 mW OPTIONS IL 500 uA min @ VCE = 10 V & IF = 20 mA 1.0 mA min @ VCE = 5 V & IF = 10 mA 1.8 mA min @ VCE = 0.6 V & IF = 20 mA VCE(sat) 0.4 V max @ IC = 250 uA & IF = 20 mA 0.4 V max @ IC = 500 uA & IF = 20 mA 0.4 V max @ IC = 1.8 mA & IF = 20 mA REFERENCE S-800W S-801W S-802W www.honeywell.com/sensing 115 LINEAR AND ROTARY POSITION Blank page 116 www.honeywell.com/sensing ULTRASONIC DISTANCE SENSORS Ultrasonic Distance Sensors Ultrasonic sensing systems offer no-touch distance measurements to an accuracy of 1 mm through dust, smoke and vapour, in areas of high noise level, and with all types of target materials, shapes and colours, with sensing ranges from 100 mm up to 6000 mm. High performance no-touch position sensing Increased reliability, no contamination. Honeywell ultrasonic sensors operate by exciting an acoustic transducer with voltage pulses, causing the transducer to vibrate ultrasonically. These oscillations are directed at a target and by measuring the time for the echo to return to the transducer, the distance may be calculated. This measurement technique in no way interferes with the object - it does not contaminate the target, nor does it affect the position. And being no-touch, there are no mechanical linkages to wear out. Ultrasonic Factory noise does not affect operation because the operating frequency is well above the frequency of ambient sound. And because sound is used, air pressure, humidity and airborne contamination have little effect on accuracy; target shape, material and colour are also not critical. Working method The sensors work with an ultrasonic transducer used for both transmitting and receiving. In each cycle, ultrasonic pulses will be transmitted. The pulses are then reflected back from the target, and received by the sensor. By means of the temperature compensated measurement of the elapsed time of the acoustic signal, the target distance is determined, with a high degree of accuracy. The resulting measurement can be output either as an analogue or a digital signal. Reflective properties Target object distance Time 0 T/2 T Almost all materials and targets reflect sound, and can therefore be detected. Only sound-absorbing materials such as cotton wool, or foam rubber are either difficult or impossible to detect. Certain materials, such as textiles, weaken the ultrasonic signals, as a result of which the maximum sensing distance is less than half of the nominal value. Target shape and surface Time Voltage Figure 1 shows the elapsed time of the acoustic pulse. The diagram shows how the pulse travels from the transducer to the target, is reflected at time T/2, and reaches the transducer at time T. Below is a diagram of the voltage at the ultrasonic transducer. Elapsed time T is directly proportional to object distance a. a = cT/2, where c is the velocity of sound. Application criteria The maximum sensing range depends on a number of factors such as target shape, surface, inclination to the beam axis, surface composition and environmental influences. The range values included in this catalogue are based on a target made of flat, sound-reflecting material at 25C and still air, placed vertical to the beam axis. All object shapes and surfaces can be measured using ultrasonic sensors, up to the maximum distance at which a sufficient echo reaches the sensor. Cylindrical, conical and small objects reduce the measuring range. Inclination to beam angle If a smooth, flat target is inclined at more than half of the nominal beam angle to the normal beam axis (e.g. 5), the echo is deflected so far that, under certain conditions, no signal is received by the sensor (see Figure 2 overleaf). At shorter target distances, the target can be inclined up to the beam (e.g. 10) from the beam axis. In the case of targets with a rough surface, the acoustic beam is reflected diffusely. The angle of inclination to the beam may, under certain circumstances, be up to 50, but the maximum sensing distance is reduced. www.honeywell.com/sensing 117 ULTRASONIC DISTANCE SENSORS 10 cm < 5 < 5 10 cm Sn Target (cm) 5 3 1 -1 -3 -5 0 200 400 Output 1400 (mm) Switching point in backwards direction 10 cm Sn 800 1000 1200 Repeatability Switching point in forwards direction 10 cm < 5 < 5 600 Hysteresis Figure 2: Effect of target inclination on the measurement Figure 4: Repeatability and hysteresis Environmental influences Mutual interference The velocity of sound in air is temperature-dependent, and increases at a rate of 0.18 %/C. Honeywell ultrasonic distance sensors have their own temperature transducer, which adjusts both the clock frequency of the elapsed time counter and the carrier frequency. Major temperature fluctuations within the measuring path can, however, lead to sound dispersion and refraction, which disturb the measuring result and limit the stability of the measurement (Figure 3). Air streams, turbulence and air layers of different densities can, in certain conditions, attenuate or deflect the echo to such an extent that the sensor cannot detect it. On the other hand, air humidity and normal atmospheric air pressure fluctuations have virtually no influence on the measurements. Despite pulse coding, if several sensors are used simultaneously in a single application, mutual interference can occur. This phenomenon will, however, only arise if, as a result of the inclination of the object, or the positioning of two sensors opposite one another, false echo signals can be received. By using the inhibitor input, maintaining minimum distances or restricting the beam angle with a focusing reflector, the problem can be almost entirely avoided. cold 10 cm Synchronisation The majority of Honeywell ultrasonic distance sensors can be very easily synchronised by interconnecting the appropriate inputs or connecting them with an external synchronisation unit. The transmission of the acoustic pulses then occurs simultaneously. This makes it possible to use the sensors for applications in which the ultrasonic transducers are facing each other, while still avoiding mutual interference. Protective measures 10 cm Sn warm 10 cm Sn 10 cm Figure 3: Effect of warm air turbulence on the measurement All sensors are protected against water and dust, according to the DIN standard IP 65. The transducer is coated with silicone rubber or epoxy, but it can be attacked by aggressive acid or caustic atmospheres. It is also necessary to ensure that the transducer face remains clear of liquid or solid deposits, which could limit the performance of the sensor. Drops of water may be deposited on the transducer surface, as a result of condensation. These could severely reduce the sensor range. Also because of the risk of icing up, and because sensors detect raindrops, the suitability of these sensors for outdoor use, despite the protective measures, is limited. Electrical interference Repeatability All information concerning repeatability and hysteresis in this data sheet is valid for axial target movements (Figure 4). If a target approaches the sensor from a distance, the output switches at the set value the given repeatability. If the target moves further away from the sensor, the output switches back into its original condition, at a distance which is equal to the sum of the setpoint and the given hysteresis the repeatability. If a target moves laterally into the acoustic beam, the echo energy increases. If the measurement threshold of the sensor is reached, the output becomes active. This threshold depends on the target properties and its distance from the sensor. The position can only be determined experimentally. All Honeywell ultrasonic sensors are protected against reverse polarity, short circuits, overloads and voltage spikes. Special protective circuitry makes the sensor almost entirely immune to electromagnetic and radio frequency interference. However, unstable measurements may arise if the sensor is placed in the vicinity of strong electrical fields. In such cases, the interconnection cables should be screened as far as possible, or separated from power cables. The use of regulated power supplies with mains filters, and limiting the maximum cable length to 50 metres can also offer possible solutions. All sensors are CE marked. Alignment aid The majority of Honeywell ultrasonic distance sensors have an LED, the output intensity of which is proportional to the ultrasonic echo received. The brighter the LED, the better aligned the sensor. Please contact your nearest Honeywell office for details of other models available. 118 www.honeywell.com/sensing ULTRASONIC DISTANCE SENSORS 940/947 Series Compact, microprocessor controlled with internal temperature compensation The new 940/947 Series is microprocessor controlled, can be set up quickly and are fitted with epoxy transducers. All the housings are sealed to IP67. The retroreflective versions allow detection of any kind of target without any dead zone. They work with a reflector target. OPTIONS 1 adjustable switching output PNP NO Analogue voltage output, 0-10 V Retroreflective, PNP NO Max. sensing distance: 600 mm Min. sensing distance: 100 mm Beam angle: 8 Repeatability: 0,2 % or 2 mm Response time: 50 ms Supply voltage: 18 to 30 V Sealing: IP67 Housing: M18 x 1 mm plastic (PBTB) Termination: Preleaded 2 m Max. sensing distance: 600 mm Min. sensing distance: 0 mm Min. reflector distance: 300 mm Beam angle: 8 Switching frequency: 25 Hz Supply voltage: 18 to 30 V Sealing: IP67 Housing: M18 x 1 mm plastic (PBTB) Termination: Preleaded 2 m REFERENCE 947-F4Y-2D-1C0-300E REFERENCE 947-FSY-2D-001-300E Max. sensing distance: 1500 mm Min. sensing distance: 200 mm Beam angle: 8 Repeatability: 0,3 % or 1 mm Switching frequency: 8 Hz Supply voltage: 18 to 30 V Sealing: IP67 Housing: M18 x 1 mm plastic (PBTB) Max. sensing distance: 1500 mm Min. sensing distance: 200 mm Beam angle: 8 Repeatability: 0,2 % or 2 mm Response time: 100 ms Supply voltage: 18 to 30 V Sealing: IP67 Housing: M18 x 1 mm plastic (PBTB) Termination: Preleaded 2 m Max. sensing distance: 1500 mm Min. sensing distance: 0 mm Min. reflector distance: 400 mm Beam angle: 8 Switching frequency: 8 Hz Supply voltage: 18 to 30 V Sealing: IP67 Housing: M18 x 1 mm plastic (PBTB) Termination: Preleaded 2 m REFERENCE 940-F4Y-2D-001-180E REFERENCE 947-F4Y-2D-1C0-180E REFERENCE 947-FSY-2D-001-180E Max. sensing distance: 3000 mm Min. sensing distance: 300 mm Beam angle: 8 Repeatability: 0,3% or 1 mm Switching frequency: 1 Hz Supply voltage: 18 to 30 V Sealing: IP67 Housing: M30 x 1,5 mm plastic (PBTB) Termination: Preleaded 2 m Max. sensing distance: 2500 mm Min. sensing distance: 300 mm Beam angle: 8 Repeatability: 0,2 % or 2 mm Response time: 90 ms Supply voltage: 18 to 30 V Sealing: IP67 Housing: M30 x 1,5 mm plastic (PBTB) Termination: Preleaded 2 m Max. sensing distance: 2500 mm Min. sensing distance: 0 mm Min. reflector distance: 600 mm Beam angle: 8 Switching frequency: 1 Hz Supply voltage: 18 to 30 V Sealing: IP67 Housing: M30 x 1,5 mm plastic (PBTB) Termination: Preleaded 2 m REFERENCE 940-F4Y-2D-001-300E 125 0,5 125 0,5 REFERENCE 947-T4Y-2D-001-130E 3,5 90 0,5 M30 x 1,5 90 0,5 M30 x 1,5 3,5 REFERENCE 947-T4Y-2D-1C0-130E www.honeywell.com/sensing 125 0,5 3,5 90 0,5 M30 x 1,5 Max. sensing distance: 600 mm Min. sensing distance: 100 mm Beam angle: 8 Repeatability: 0,3 % or 1 mm Switching frequency: 25 Hz Supply voltage: 18 to 30 V Sealing: IP67 Housing: M18 x 1 mm plastic (PBTB) REFERENCE 947-TSY-2D-001-130E 119 ULTRASONIC DISTANCE SENSORS 944 Series Teach in, Analogue and 2 switching outputs 948 Series Thru scan, 2 part The new 944 series are microprocessor controlled and fully programmable by teach-in, with the simple pressing of a button. They offer analogue and two switching outputs through a standard M-12, 5-pin connector. All the models are IP67 with chemical-resistant body and epoxy face. Parameters are stored in non-volatile memory. OPTIONS 2 switching outputs PNP NO Analogue output 0-10 volts 2 switching outputs PNP NO Analogue output 4-20 mA Beam angle: Repeatability : Supply voltage: Sealing: Housing: Beam angle: Repeatability : Supply voltage: Sealing: Housing: 8 0,4 % or 2 mm 19 to 30 V IP67 M30 x 1,5 mm plastic (PBTB) Max. sensing distance: Min. sensing distance: Switching frequency: 3500 mm 350 mm 0,8 Hz 2000 mm 250 mm 1 Hz REFERENCE Max. sensing distance: Min. sensing distance: Switching frequency: REFERENCE Max. sensing distance: Min. sensing distance: Switching frequency: 3500 mm 350 mm 0,8 Hz Max. sensing distance: Beam angle: Supply voltage: Sealing: Housing: Max. sensing distance: Min. sensing distance: Switching frequency: 1500 mm 150 mm 1 Hz 944-T4V-2D-1C1-200E 350 mm 60 mm 8 Hz Max. sensing distance: Min. sensing distance: Switching frequency: 2000 mm 250 mm 1 Hz 2,0 (0.08) 1500 mm 150 mm 1 Hz 12,0 (0.47) 2000 (78.74) 20,0 (0.79) 6,5 (0.04) 17,0 (0.67) 5,5 (0.22) 10,0 (0.39) 3,2 (0.13) REFERENCE 944-T4V-2D-1D1-200E Max. sensing distance: Min. sensing distance: Switching frequency: 350 mm 60 mm 8 Hz 944-T4V-2D-1C1-300E 30,0 (1.18) 2,0 (0.08) 10,0 (0.39) SWITCHING PNP/NO NPN/NO PNP/NC NPN/NC www.honeywell.com/sensing 12,0 (0.47) 2000 (78.74) 20,0 (0.79) REFERENCE 944-T4V-2D-1D1-300E 120 300 mm 8 18 to 30 V IP67 Plastic rectangular 30,0 (1.18) REFERENCE 944-T4V-2D-1D1-180E REFERENCE 944-T4V-2D-1C1-180E Max. sensing distance: Min. sensing distance: Switching frequency: 11,2 1 switching output NO/NC; NPN/PNP REFERENCE 944-T4V-2D-1D1-130E REFERENCE 944-T4V-2D-1C1-130E Max. sensing distance: Min. sensing distance: Switching frequency: 3,5 M30 x 1,5 11,2 M30 x 1,5 3,5 8 0,4 % or 2 mm 19 to 30 V IP67 M30 x 1,5 mm plastic (PBTB) The 948 series perform presence measurement by using an ultrasonic beam. The 948 series is one of the smallest ultrasonic scan through devices in the world. It is especially suited for food and beverage applications, in particular bottle counting. Easy to install, the 948 series is suitable when space is at a premium. 6,5 (0.04) 17,0 (0.67) 5,5 (0.22) 3,2 (0.13) REFERENCE 948-HSY-2D-001-300E 948-HSY-2D-002-300E 948-HSY-2D-003-300E 948-HSY-2D-004-300E ULTRASONIC DISTANCE SENSORS 942-T Series with Digital Link, Analogue and 2 switching outputs 942 Series Compact programmable 30 mm diameter sensor The new, plastic housing (PBTB), programmable 942-T series provides flexibility to customers through independent analogue and 2 switching outputs to suit most of the applications. The programming is easy to do using WindowTM based software. OPTIONS 2 switching outputs PNP 2NO/NC Analogue output 0-10 volts 2 switching outputs PNP 2NO/NC Analogue output 4-20 mA Voltage output, 0-10 V 2 switching outputs PNP Beam angle: Repeatability : Supply voltage: Sealing: 8 0,4 % or 2 mm 19 to 30 Vdc Connector IP65 Front face IP67 Housing: M30 x 1,5 mm plastic (PBTB) Switching frequency: 5 to 30 Hz Beam angle: Repeatability : Supply voltage: Sealing: Max. sensing distance: 1500 mm Min. sensing distance: 150 mm Beam angle: 10 Repeatability: 0,4 % or 2 mm Switching frequency: 5 to 30 Hz Response time: 100 ms Supply voltage: 19 to 30 V Sealing: IP65 Housing: M30 x 1,5 mm stainless steel Max. sensing distance: Min. sensing distance: Max. sensing distance: Min. sensing distance: 3500 mm 350 mm 2000 mm 250 mm REFERENCE 942-T4N-2D-1C1-200E Max. sensing distance: Min. sensing distance: 2000 mm 250 mm REFERENCE 942-T4N-2D-1D1-180E REFERENCE 942-T4N-2D-1C1-180E Max. sensing distance: Min. sensing distance: 3500 mm 350 mm REFERENCE 942-A4N-2D-1C1-220S REFERENCE 942-T4N-2D-1D1-130E REFERENCE 942-T4N-2D-1C1-130E Max. sensing distance: Min. sensing distance: 8 0,4 % or 2 mm 19 to 30 Vdc Connector IP65 Front face IP67 Housing: M30 x 1,5 mm plastic (PBTB) Switching frequency: 5 to 30 Hz 1500 mm 150 mm Max. sensing distance: Min. sensing distance: 1500 mm 150 mm REFERENCE 942-T4N-2D-1D1-200E Max. sensing distance: 3000 mm Min. sensing distance: 300 mm Beam angle: 8 Repeatability: 0,4 % or 2 mm Switching frequency: 5 to 30 Hz Response time: 100 ms Supply voltage: 19 to 30 V Sealing: IP65 Housing: M30 x 1,5 mm stainless steel REFERENCE 942-A4N-2D-1C1-130E www.honeywell.com/sensing 121 ULTRASONIC DISTANCE SENSORS 942 Series 2 Piece 30 mm diameter sensor with RS232 Interface 941 Series Limit switch style Voltage and current output 2 switching RS232 interface Max. sensing distance: 1500 mm Min. sensing distance (adjustable): 200 mm Beam angle: 10 Repeatability: 1 mm Supply voltage: 18 to 50 V Sealing: IP65 Housing: Zinc die-cast, sea water resistant paint finish Max. sensing distance: Min. sensing distance: Beam angle: Repeatability: Switching frequency: Response time: Supply voltage: Sealing: Housing: 1500 mm 150 mm 10 0,2 % or 1 mm 5 to 8 Hz 120 ms 19 to 30 V IP65 M30 stainless steel OPTIONS Analogue voltage output, 0-10 V REFERENCE Complete sensor: 942-M3A-2D-1G1-220S Response time: 150 ms REFERENCE 941-C2V-2E-1C0 Switching 2 adjustable switching outputs PNP NO Switching frequency: REFERENCE 941-C2V-2E-001 122 www.honeywell.com/sensing 10 Hz ULTRASONIC DISTANCE SENSORS 946 Series Teach In 30 mm diameter precision output OPTIONS Analogue voltage (0-10 V) and current (4-20 mA) output 2 adjustable switching outputs PNP NO Beam angle: Repeatability: Supply voltage: Sealing: Housing: Termination: Beam angle: Repeatability: Supply voltage: Sealing: Housing: Termination: 5 < 0,1 % 10 to 30 V IP65 M30 x 1,5 mm stainless steel M12 connector Max. sensing distance: Min. sensing distance: Response time: 500 mm 60 mm 35 ms REFERENCE 946-A4V-2D-2C0-380E Max. sensing distance: Min. sensing distance: Response time: 2000 mm 200 mm 100 ms 300 mm 60 mm 15 Hz Max. sensing distance: Min. sensing distance: Switching frequency: 2000 mm 200 mm 5 Hz REFERENCE 946-A4V-2D-001-175E 4000 mm 500 mm 300 ms Max. sensing distance: Min. sensing distance: Switching frequency: 6000 mm 800 mm 1 Hz REFERENCE 946-A4V-2D-001-65E REFERENCE 946-A4V-2D-2C0-85E Max. sensing distance: Min. sensing distance: Response time: Max. sensing distance: Min. sensing distance: Switching frequency: REFERENCE 946-A4V-2D-001-400E REFERENCE 946-A4V-2D-2C0-175E Max. sensing distance: Min. sensing distance: Response time: 5 <1% 10 to 30 V IP65 M30 x 1,5 mm stainless steel M12 connector 6000 mm 800 mm 500 ms REFERENCE 946-A4V-2D-2C0-65E www.honeywell.com/sensing 123 ULTRASONIC DISTANCE SENSORS Accessories Due to regional agency approval requirements, some products may not be available in your area. Please contact your regional Honeywell office regarding your choice of product. Power supply Beam Deflectors 24 Vdc regulated power supply with output relay Beam deflectors deflect the ultrasonic beam by 90 with virtually no signal loss. They are extremely useful in applications where space is limited; they allow the space required for the dead zone to be accommodated when setting up the sensor. The focusing beam deflector concentrates the ultrasonic beam, preventing unwanted reflection. It reduces the beam angle by approximately half. The 43192871 series is made of stainless steel and may be used to fix the sensor. The 66195116-001, made of plastic, is available for M30 sensors only and cannot be used to fix the sensor. OPTIONS M18 Compact - M30 The FF-MADB24RB is a small and versatile power supply usually used with the ultrasonic distance sensors, but may be used for any purpose. The power supply accepts 115 or 230 Vac input, is regulated to 24 Vdc. An internal SPDT relay may be triggered by NPN or PNP sensor output. Use with Series: Housing: 942, 944, 946, 947 Plastic Use with Series: Housing: Use with Series: 940, 941, 942, 944, 946, 947 Supply voltage: 110 Vac or 220 to 240 Vac Circuit protection: Short circuit Load current: 150 mA max. LED indication: Output relay Output type: Relay SPDT 4 A/250 Vac, 3 A/60 Vdc Termination: Screw Housing: Plastic Housing type: DIN rail mount, 2 holes O4,5 mm REFERENCE 66195116-001 37,5 1.48 50,0 1.97 35,0 1.38 4,8 0.19 M30 940, 942, 944, 946, 947 Stainless steel 60,0 2,36 62,5 2.46 75,0 2.95 6,0 0.24 110,0 4.33 REFERENCE FF-MADB24RB Focusing 124 Focusing Use with Series: Housing: REFERENCE 43192871-001 43192871-002 www.honeywell.com/sensing REFERENCE 43192871-003 43192871-004 940, 942, 944, 946, 947 Stainless steel ULTRASONIC DISTANCE SENSORS Mounting Clamps M12 Connectors OPTIONS WITHOUT CABLES WITH CABLES M12 female, 5 pin, 5 screw terminals M12 female, 5 pin, 2 metre cable (supplied with 946 Series) The 66195044-001 is used for the 940, 941, 944, 947 series but may be used for any industrial sensor with standard M12 4 pin or 5 pin connector. The 66195044-001 connector is usually included with every sensor of the above series for connectorised models. Use with Series: Housing: Termination: Number of pins: 940, 941, 944, 947 Plastic Female M12 5 The 43178389 are plastic mounting clamps usually used with the ultrasonic distance sensors, but may be used with any M18 or M30 industrial sensors. The 43178389 feature 2-part plastic clamps with 2 M5x60 mm screws and nuts. The 55002 is a 5 pin, M12 female, metal, cable connector with 2 metres of cable attached. It is used with the 946 series but may be used for any industrial sensor with standard M12 4 pin or 5 pin connector. The 55002 cable connector is included with every sensor of the 946 series. Use with Series: Termination: Number of pins: REFERENCE 66195044-001 M12 female, 7 pin (942 Series) OPTIONS M18 Use with Series: Housing: 940 Plastic 940, 941, 944, 946, 947 Female M12 5 REFERENCE 55002 Female, 8 pin, 2 metre cable (942 Series Compact) The 66195074-001 is used for the ultrasonic distance sensor heads 942-A4M. It needs to be wired and soldered at the setup of the sensor. The 66195074-001 is included in every package of the 942 separate series (942 M3A...) but not in the spare ultrasonic heads (942-A4M..). Use with Series: Housing: Termination: Number of pins: REFERENCE 66195074-001 942 Stainless Steel Female Binder 7 The 55195126-001 is an 8 pin, female, metal, cable connector with 2 metres of cable attached. It used with the 942-A4N compact series. This device is useful but not necessary to setup the sensor, as every ultrasonic distance sensor 942A4N is provided with a female connector without cable, with pins to solder. Use with Series: Housing: Termination: Number of pins: REFERENCE 43178389-018 M30 Use with Series: Housing: 942, 944, 946, 947 Plastic 942 Stainless steel Female Binder 8 REFERENCE 55195126-001 REFERENCE 43178389-030 www.honeywell.com/sensing 125 ULTRASONIC DISTANCE SENSORS Accessories (continued) Programming OPTIONS Software The software package 55195101-101 contains software for programming 942 series separate and 55195101-102 for the 942 series compact . The software runs under Microsoft WindowsTM versions 95TM and later. Both packages contain an RS-232 cable (crossed) with 2 Sub-D 9 pin connectors, to connect to a PC. For 55195101-101 (942 Series separate), the other end of the cable connects to the control box 942-M0A.... by screw terminals. For 55195101102 (942 Series compact), the other end of the cable connects to programming module 55000005-002. Programming adaptor for 946 Series Use with Series: Sealing: Number of pins: 942 Series Compact programming module 946 IP65 4 REFERENCE 40779 For sensor series 942T... the programming cable gives easy access to the RS232 interface. The RS232 interface of the connector is directly connected to the Sub-D 9 pin connector, which allows easy connection to a PC. The WindowsTM based software is easy to use and is supplied on a floppy disc with the programming cable. 942-A Series Separate 942-N Series Compact 942-T Series (includes programming cable) The 55000005-002 is a programming module for the 942-A4N series. Although this device is not necessary to setup the sensor, it is very useful as it provides quick connections for the RS-232 data link and the `hold' switch. It features 1 connector din Sub-D 9 pin, compatible with the cable included in the software package 55195101-102, 1 microswitch to put the sensor in `hold' mode (necessary for the RS-232 link), 1 female and 1 male connector to be inserted between the customer's interface and the 942-A4N sensor. REFERENCE 55195101-101 55195101-102 55000018-001 The 55000005-002 may be used to programme any number of sensors and is not necessary in the usual run of the application. It is not compatible with 942 separate series. REFERENCE 55000005-002 126 www.honeywell.com/sensing PRESSURE SENSORS Pressure Sensors Honeywell has over 40 years of experience in the pressure transducer industry. We offer three pressure sensor measurement types - absolute, differential and gage - including vacuum gage and bidirectional types. A wide variety of pressure ranges, along with both amplified and unamplified versions, are available. Silicon-based versions in stainless steel and brass housings allow for use in harsh environmental conditions. A wide choice of mounting, package, and port configurations allows customers to choose from standard off-the-shelf designs. Pressure sensors contain sensing elements that consist of four piezoresistors buried in the face of a thin, chemically-etched silicon diaphragm. A pressure change causes the diaphragm to flex, inducing a stress or strain in the diaphragm and the buried resistors. The resistor values change in proportion to the stress applied and produce an electrical output. All Honeywell pressure sensors feature excellent repeatability, high accuracy and reliability under varying environmental conditions. In addition, they feature highly consistent operating characteristics from one sensor to the next and interchangeability without recalibration. Stainless Steel versions High Purity versions Honeywell also offers stainless steel pressure transducers that use bonded strain gauge technology with stainless steel media isolation, which eliminates the need for internal seals. Our stainless steel pressure transducers utilize bonded semiconductor strain gauge technology and are designed for demanding environments involving corrosive media. They are manufactured in a variety of packages that are widely used in medical equipment, compressors, hydraulic controls, transportation, agriculture, and refrigeration applications. Laser trimmed and tested, they are fully calibrated and temperature compensated to assure long-term reliability and performance. Stainless steel pressure transducers are fully compensated to eliminate known sources of errors. High purity pressure sensors are focused on high-purity applications in the wafer-processing segment of the semiconductor industry. With ISO 9001 certified facilities and Class 10 cleanroom capability, Honeywell manufactures a full line of high purity pressure sensing and control products; each individually tested, inspected and certified to be in full compliance with the product specification. The long life of the high-purity pressure sensors, coupled with long-term stability, greatly reduces or eliminates the need for zero and span adjustments. Most of our transducers utilize the `bonded strain gage' technology and are fully stainless steel media isolated, eliminating the need for internal elastomer seals. Our strain gage design is very resistant to the effects of shock, vibration and hostile environments. All of our transducers are fully compensated and tested against the appropriate specifications before shipment. www.honeywell.com/sensing 127 PRESSURE SENSORS AB/HP Series BL Series The AB-High Performance pressure transducer is extremely accurate down to 0.25% span over a wide compensated temperature range. Both zero and fullscale temperature compensation are held to extremely narrow limits. The BL pressure transmitter has a conventional 4 mA to 20 mA output and is available with accuracies to 0.25%. It has Factory Mutual approval as an intrinsically safe device for use in hazardous areas. Class I, Division I, Groups A through G (when used within approved barriers). The transducer's body is made in a configuration permitting its use as a `flushmounted' device in situations where ease of cleaning or low-fluid volumes are major requirements. It may also be mounted in an adaptor for more conventional installations. Made from 316L or 15-5PH stainless steel, the AB/ HP offer premium performance and flexibility at OEM prices. Approvals: Supply voltage: Signal conditioning: Compensated temperature range: Port style: Output type: CE 5.0 Vdc, 6.0 Vdc max. Unamplified compensation -1 C to 71 C (30 F to 160 F) Flush Diaphragm 0 mV to 100 mV Approvals: Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: Port style: Output type: Termination type: CE, FM 12.0 Vdc to 30.0 Vdc Amplified compensated -40 C to 82 C (-40 F to 180 F) -1 C to 54 C (-30 F to 130 F) Flush Diaphragm 4 mA to 20 mA Bendix Connector 79,0 max. (3.125) A 23,75 max. (0.875) 4 conductor color coded shielded cable 0.91 m long (3 ft. ) 6,4 (0.25) + Excitation: Red + Signal: Grn - Excitation: Blk - Signal: Wht B 23,8 max. dia. (0.935) 29,2 max. (1.15) 20,6 (0.75) 19,05 max. (0.75) PRESSURE SENSITIVE DIAPHRAGM + EXCITATION RETURN ZERO BALANCE CASE GROUND CONNECTOR PTIH-10-6P A B C&D E PRESSURE RANGE (PSI) Pressure Range (PSI) Dim. A MAX Dim. B 0-5 .271 (6.9) .25 (6.4) 1-15 to 0-50 .232 (5.9) .25 (6.4) 0-100 to 0-200 .238 (6.1) .25 (6.4) OPTIONS 0-500 to 0-1000 .238 (6.1) .19 (4.8) 0-2000 to 0-5000 .273 (6.9) .19 (4.8) 0,91 m (3 ft) 4-Conductor Shielded Cable -54 C to 93 C (-65 F to 200 F) 0-10000 to 0-15000 .287 (7.3) .19 (4.8) 0-20000 .285 (7.5) .19 (4.8) PRESSURE RANGE 0 psia to 15 psia 0 psia to 50 psia 0 psig to 6 psig 0 psig to 25 psig 0 psig to 15 psig 0 psis to 100 psis 0 psis to 200 psis 0 psis to 500 psis 0 psis to 1,000 psis 0 psis to 2,000 psis 0 psis to 3,000 psis REFERENCE ABH015PAC1B ABH050PAC1B ABH006PGC1B ABH025PGC1B ABH015PGC1B ABH100PSC1B ABH200PSC1B ABH500PSC1B ABH01KPSC1B ABH02KPSC1B ABH03KPSC1B OPTIONS MEASUREMENT TYPE Gauge Gauge Sealed Gauge Sealed Gauge Sealed Gauge Sealed Gauge Sealed Gauge Sealed Gauge Bendix High Temperature Connector -54 C to 149 C (-65 F to 300 F) 128 C 19,0 max. dia. (0.749) Pressure sensitive surface (diaphragm) MEASUREMENT TYPE Absolute Sealed Gauge Sealed Gauge A B D A Shield (drain) MEASUREMENT TYPE Absolute Absolute Gauge Gauge Gauge Sealed Gauge Sealed Gauge Sealed Gauge Sealed Gauge Sealed Gauge Sealed Gauge F E PRESSURE RANGE 0 psia to 25 psia 0 psis to 3,000 psis 0 psis to 10,000 psis REFERENCE ABH025PABB ABH03KPSBB ABH10KPSBB www.honeywell.com/sensing PRESSURE RANGE 0 psig to 15 psig 0 psig to 15 psig 0 psis to 100 psis 0 psis to 100 psis 0 psis to 200 psis 0 psis to 500 psis 0 psis to 5,000 psis 0 psis to 10,000 psis REFERENCE BLH015PGBG BL015PGBG BL100PSBG BLH100PSBG BL200PSBG BL500PSBG BL05KPSBG BLH10KPSBG PRESSURE SENSORS BX Series Datamate Series The BX pressure sensor is intended for OEMs who need a small, high performance pressure sensor. The unique sensor module design eliminates the need for oil-filled capsules and corrugated diaphragms providing a true, robust sensing surface for long life and superior performance. The DATAMATE is a two-wire pressure transmitter which is compatible with data loggers and instrumentation used in processing environments. Its 4 mA to 20 mA output is ideal for remote monitoring of both primary and secondary process variables. Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: Port style: Output type: Termination type: - SIGNAL d - EXCITATION c 5.0 Vdc Unamplified compensated -40 C to 100 C (-40 F to 212 F) 0 C to 80 C (32 F to 130 F) Flush diaphragm 0 mV to 50 mV 4 - 22 AWG tinned Cu wires 22 AWG 0,6 (0.025) DIA. TINNED Cu WIRES APPROX. 9,6 (0.38) LONG 4 PLCS 8,6 (0.375) 5,8 max. (0.23) 19,0 (0.75) 13,0 (0.5) The DATAMATE is made of series 300 stainless steel. It is suitable for use with a variety of media that would otherwise require insulators. It is also intrinsically safe (when used within approved barriers) for use in Class I, Division I, Groups A through G hazardous areas. Approval: FM Supply voltage: 12.0 Vdc to 40.0 Vdc Signal conditioning: Amplified compensated Operating temperature range: -40 C to 100 C (-40 F to 212 F) Compensated temperature range: -1 C to 54 C (30 F to 130 F) Port style: 1/8 - 27 NPT Output type: 4 mA to 20 mA Termination type: 3-wire, 24 AWG, 1/2 in. NPT internal conduit + SIGNAL b + EXCITATION a PRESSURE SENSITIVE DIAPHRAGM 1/8-27 NPT, 12,7 (0.5) HEX 12,7 (0.5) NPT INTERNAL OPTIONS MEASUREMENT TYPE Gauge + EXCITATION - EXCITATION CASE GROUND O 38,1 (O1.5) PRESSURE RANGE 0 psig to 15 psig REFERENCE BX015PGTA RED BLK GRN 19,0 (0.75) 71,4 (2.81 ) 431,8 (17.0) OPTIONS MEASUREMENT TYPE Gauge Gauge Sealed Gauge Sealed Gauge Sealed Gauge Sealed Gauge www.honeywell.com/sensing PRESSURE RANGE 0 psig to 15 psig 0 psig to 50 psig 0 psis to 100 psis 0 psis to 200 psis 0 psis to 500 psis 0 psis to 5,000 psis REFERENCE DM015PG1WG DM050PG1WG DM100PS1WG DM200PS1WG DM500PS1WG DM05KPS1WG 129 PRESSURE SENSORS Eclipse Series EA Series The EA Series is designed for OEM users requiring high output and corrosionresistance. It has operated through millions of pressure cycles without damage and is well suited for the cycling regimes found in automatic equipment, robots, and hydraulic systems. Approval: Supply voltage: Signal conditioning: Compensated temperature range: Port style: Termination type: Measurement type: UL 85.0 Vdc Amplified compensated 1 C to 85 C (30 F to 185 F) 1/8 in - 27 NPT Quick disconnect Gauge 41,91 (1.65) The Eclipse (EC) Series pressure transducers are designed for OEMS who require a reliable pressure transducer for industrial or heavy-duty applications. The model EC features our proven all-wetted stainless steel design, rugged packaging, internal signal amplification, and price which makes it an ideal sensor for a variety of applications. The model EC offers a broad selection of pressure ranges, output ranges, process connections, and electrical termination to meet the demanding requirements of customers worldwide. Approvals: Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: UL, CE 5.0 Vdc Amplified compensated -40 C to 105 C (-40 F to 221 F) -40 C to 105 C (-40 F to 221 F) 20,83 (0.82) 5,11 (O.201) 2 PLCS 15,75 (0.625) 41,91 (1.65) 34,29 (1.375) 1/4 OD STRAIGHT SS PORT (0-6 to 0-50 PSI) 1/8-27 NPT, 13,0 (0.5) HEX (FOR EA/100 THROUGH 5000) 3/8-24 UNF, 14,0 (0.5625) HEX (OPTIONAL ON 5000) 54,61 (2.15) 76,0 (3.0) max. 38,0 (1.5) max. 2 Output 38,10 (1.50) 20,32 (0.75) PINS 3,56 X 0,38 (.140 X .015) d 2 3 4 1 4 Excitation a c 3 Ground b 25,0 (1.0) max. 25,0 (1.0) PSI: 1/8-27 NPT, 15,9 (0.625) Hex BAR: G 16,0 (0.25) Hex OPTIONS OPTIONS Output 1 Vdc to 6 Vdc -55 C to 100 C (-67 F to 212 F) The Model Eclipse is available with a mini DIN style electrical connector. This connection is a popular choice throughout the world and offers quick disconnection, but can be rigidly attached with the center screw fastener. The cable exit may be adjusted to any 90 direction. MEASUREMENT TYPE Gauge Gauge Gauge Gauge Gauge Gauge Gauge Gauge Gauge PRESSURE RANGE 0 psig to 6 psig 0 psig to 15 psig 0 psig to 25 psig 0 psig to 100 psig 0 psig to 200 psig 0 psig to 300 psig 0 psig to 500 psig 0 psig to 1,000 psig 0 psig to 5,000 psig REFERENCE EA006PG1QD EA015PG1QD EA025PG1QD EA100PG1QD EA200PG1QD EA300PG1QD EA500PG1QD EA01KPG1QD EA05KPG1QD Hirschmann - 0.5 Vdc to 4.5 Vdc Output 1/8 in - 27 NPT Connector MEASUREMENT TYPE Sealed Gauge Sealed Gauge Output 1 kHz to 6 kHz -40 C to 85 C (-40 F to 185 F) MEASUREMENT TYPE Gauge Gauge 130 PRESSURE RANGE 0 psig to 300 psig 0 psig to 500 psig REFERENCE EA300PG1QF EA500PG1QF www.honeywell.com/sensing PRESSURE RANGE 0 psis to 200 psis 0 psis to 500 psis REFERENCE EC200PS1HC EC500PS1HC PRESSURE SENSORS Eclipse Series (continued) C Ground A Excitation 23,0 (0.875) 38,0 (1.5) 48,0 max. (1.875) 10,0 in. (0.375) max. 25,0 max (1.0) 25,0 (1.0) max. 3 Conductor, 24 AWG, Color Coded, Shielded Cable, 0,91 m (3 ft.) 25,0 (1.0) B Output 25,0 (1.0) max 10,0 (0.375) max. PSI: 1/8-27 NPT, 15,9 (0.625) Hex BAR: G 16,0 (0.25) Hex PSI: 1/8-27 NPT, 16,0 (0.625) Hex 7/16 UNF, 14,0 (05625) Hex BAR: G1/4, 19,0 (0.75) Hex OPTIONS OPTIONS To meet the requirements of automotive applications, the Model Eclipse is offered with the Packard Metri-PackTM electrical connector. This connector has been specified for the extreme environments found in engine and hydraulic applications. The connector has a locking lug to maintain the connection with the mating plug. The Model Eclipse can be provided with an all stainless steel case and an integral cable for electrical connection. The advantage of this arrangement is that the environment rating is increased to IP66 and would be recommended for extreme outdoor or industrial environments. Packard - 0.5 Vdc to 4.5 Vdc Output 1/8 in - 27 NPT Connector MEASUREMENT TYPE Sealed Gauge Sealed Gauge Sealed Gauge Sealed Gauge Sealed Gauge PRESSURE RANGE 0 psis to 200 psis 0 psis to 300 psis 0 psis to 500 psis 0 psis to 2,000 psis 0 psis to 3,000 psis Model Cable MEASUREMENT TYPE Sealed Gauge Sealed Gauge PRESSURE RANGE 0 psis to 100 psis 0 psis to 5,000 psis REFERENCE EC100PS1CG EC05KPS1CG REFERENCE EC200PS1PC EC300PS1PC EC500PS1PC EC02KPS1PC EC03KPS1PC G1/4 in - 19 BSP Connector MEASUREMENT TYPE Sealed Gauge PRESSURE RANGE 0 bar to 350 bar REFERENCE EC350BS6PC 4 mA to 20 mA Output G1/4 in - 19 BSP Connector MEASUREMENT TYPE Gauge PRESSURE RANGE 0 bar to 1 bar REFERENCE EC001BG6PG www.honeywell.com/sensing 131 PRESSURE SENSORS MediaMate Series The MEDIAMATE pressure transducer provides the user with the corrosion resistance of stainless steel at low OEM pricing. It is fully compensated and completely interchangeable without further calibration. The MEDIAMATE's wetted parts and outer case are made from 300 series stainless steel. It is now being used with a wide variety of corrosive medial such as Freon(R), ammonia, water, and hydraulic fluids. Approvals: Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: Output type: Measurement type: CE 5.0 Vdc, 6.0 Vdc max. Unamplified compensated -40 C to 100 C (-40 F to 212 F) -1 C to 82 C (30 F to 180 F) 0 mV to 50 mV Gauge MEDIAMATE WITH HIRSCHMANN 54,61 [(2.15) 40,64 (1.60) 19,14 (0.75) 16,0 SQUARE (0.63) 2 3 4 1 MEDIAMATE WITH HOLLINGSWORTH 1/8-27 NPT 46,48 (1.83) 40,64 (1.60) 25,4 O (1.0) 4 PIN CODES ARE FOR OPTIONAL HIRSCHMANN AND HOLLINGSWORTH CONNECTORS 19,14 (0.75) Hollisworth Pin Code 1 3 12,7 HEX (0.5) VENT HOLE 2 1/8-27 NPT Hirshmann Pin Code Function 1 1 + Signal 2 2 + Excitation 3 3 - Signal 4 4 - Excitation 12,7 HEX (0.5) OPTIONS OPTIONS Hollingsworth - 1/8 in - 27 NPT Connector Hirschmann - G-1/8 in BSP Connector MEASUREMENT TYPE Gauge Gauge Gauge Gauge Gauge Gauge PRESSURE RANGE 0 psig to 15 psig 0 psig to 100 psig 0 psig to 200 psig 0 psig to 500 psig 0 psig to 1,000 psig 0 psig to 5,000 psig REFERENCE MM015PG1QA MM100PG1QA MM200PG1QA MM500PG1QA MM01KPG1QA MM05KPG1QA MEASUREMENT TYPE Gauge Gauge Gauge Gauge PRESSURE RANGE 0 psig to 25 psig 0 psig to 200 psig 0 psig to 5,000 psig 0 psig to 7,000 psig REFERENCE MM025PG10HA MM200PG10HA MM05KPG10HA MM07KPG10HA Hirschmann - 1/8 in - 27 NPT Connector Hollingsworth - 3/8 in UNF Connector MEASUREMENT TYPE Gauge PRESSURE RANGE 0 psig to 5,000 psig REFERENCE MM05KPG3QA MEASUREMENT TYPE Gauge Gauge PRESSURE RANGE 0 psig to 50 psig 0 psig to 100 psig REFERENCE MM050PG1HA MM100PG1HA Hirschmann - G-1/4 in BSP Connector MEASUREMENT TYPE Gauge 132 www.honeywell.com/sensing PRESSURE RANGE 0 psig to 5,000 psig REFERENCE MM05KPG6HA PRESSURE SENSORS SA Series SR Series The harsh duty SA pressure transducer has a water resistant, stainless steel case for complete protection from harsh environments. Internal hermetic sealing is used to provide measurement from absolute pressures (psia) or pressures referenced to a sealed chamber (psis). Underwriters Laboratories has approved the SA as a component in float and pressure-operated motor controllers (File #E93356). The Model SR is intended for OEMs requiring a small pressure sensor with high pressure capability and superior corrosion resistance. Constructed of brazen assembly of 300 series stainless steels, the SR can tolerate a wide variety of corrosive medial without risk of leaking. The SR's design provide high working pressures and high overload and burst pressures at no extra cost. Approvals: Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: Port style: Output type: Termination type: Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: Port style: Output type: Termination type: UL (*C1D products) CE (*C1DE products) 9.0 Vdc to 24.0 Vdc Amplified compensated -55 C to 105 C (-48 F to 221 F) -1 C to 85 C (30 F to 185 F) 1/8-27 NPT 1 Vdc to 6 Vdc 0,91 m (3 ft) 3-conductor shielded cable 5.0 Vdc Unamplified compensated -40 C to 100 C (-40 F to 212 F) 0 C to 75 C (32 F to 167 F) Capsule 0 mV to 100 mV 4 - 22 AWG tinned Cu wires 15,0 max. (0.625) 7,6 max. (0.30) SA WITH CABLE 1/8-27 NPT 3/8-24 UNF (optional 100 PSI) 3 conductor color coded shielded cable 0,91 m long (3 ft) Excitation: Red 4, 22 AWG TINNED Cu SOLID WIRES 14,0 (0.55) LONG a + Excitation c 19,5 max. - Excitation (0.766) 4,3 max. (0.17) 19,0 / 18,95 18,5 (0.748 / 0.746) (0.75) 40,0 (1.56) A b + Signal d - Signal O-RING GROOVE Signal: Wht Common: Blk Bare (case shield) PRESSURE RANGE (PSI) 19,0 (0.75) 10,0 (0.38) *A Pressure Range (PSI) 48,0 (1.88) Bore Dia. 1/2 Hex for 1/8-27 NPT port 9/16 Hex for 3/8-24 UNF port O-Ring Sealing Depth** Cavity Depth 15-500 .500 (12.70) 2-012 .21 (5.33) .22 (5.58) 1000-1500 .375 (9.52) 2-010 .21 (5.33) .22 (5.58) 2000 .375 (9.52) 2-010 .21 (5.33) .22 (5.58) CAUTION: Contact with sensing surface at bottom of cavity will affect accuracy and may cause damage. The O-ring groove on 2000 psi unit is wider to accommodate a backup ring behind the O-ring. All dimensions in inches (mm). OPTIONS UL Approval MEASUREMENT TYPE Absolute Absolute Absolute Absolute Gauge Sealed Gauge Sealed Gauge Sealed Gauge Sealed Gauge PRESSURE RANGE 0 psia to 15 psia 0 psia to 25 psia 0 psia to 50 psia 0 psia to 100 psia 0 psig to 15 psig 0 psis to 100 psis 0 psis to 200 psis 0 psis to 500 psis 0 psis to 3,000 psis REFERENCE SA015PA1C1D SA025PA1C1D SA050PA1C1D SA100PA1C1D SA015PG1C1D SA100PS1C1D SA200PS1C1D SA500PS1C1D SA03KPS1C1D PRESSURE RANGE 0 psia to 25 psia 0 psia to 50 psia REFERENCE SA025PA1C1DE SA050PA1C1DE CE Approval MEASUREMENT TYPE Absolute Absolute OPTIONS MEASUREMENT TYPE Gauge Gauge Gauge Gauge Gauge Gauge Gauge Gauge Gauge www.honeywell.com/sensing PRESSURE RANGE 0 psig to 15 psig 0 psig to 25 psig 0 psig to 50 psig 0 psig to 100 psig 0 psig to 200 psig 0 psig to 300 psig 0 psig to 500 psig 0 psig to 1,000 psig 0 psig to 2,000 psig REFERENCE SR015PGTB SR025PGTB SR050PGTB SR100PGTB SR200PGTB SR300PGTB SR500PGTB SR01KPGTB SR02KPGTB 133 PRESSURE SENSORS ML Series ST Series The Model ML pressure transducers combines the latest in ASIC technology with our proven stainless steel design. This digitally compensated transducer offers an unparalleled value and performance combination making it the ideal pressure sensing solution for demanding automotive and industrial applications. Fully temperature compensated, calibrated, and amplified, the ML is available in 100 to 5,000 psis pressure ranges. The Model ST pressure transducer combines Honeywell's proven silicon pressure sensing with the latest in ASIC technology in a rugged, industrial package. High value, coupled with outstanding performance, make this an ideal transducer for industrial control applications such as air compressors and pneumatic equipment. Approval: Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: Termination type: Measurement type: UL 5.0 Vdc Amplified compensated -40 C to 105 C (-40 F to 221 F) -40 C to 105 C ( -40 F to 221 F) Packard Metri-PackTM Connector Sealed Gauge 40,0 * (1.58) 19,0 (0.73) Not Intended for Customer use Signal conditioning: Operating temperature range: Compensated temperature range: Termination type: Measurement type: 15,0 ** (0.60) 40,0 (1.58) Not Intended for Customer use 22,0 (0.85) Amplified compensated -40 C to 100 C (-40 F to 212 F) -40 C to 100 C (-40 F to 212 F) Packard Metri-PackTM Connector Gauge 19,0 (0.73) 15,0 (0.60) 22,0 (0.85) c 27,0 (1.06) c 27,0 (1.06) b b a 27,0 (1.06) HEX a * 1/4-18 NPT and G1/4-18 BSP configurations are both optional. Contact the factory to discuss other pressure port options. 27,0 (0.063) HEX * Maximum ** 19,0 (0.75) for 1/4-18 NPT 1/8-27 NPT or 1/4-18 NPT OPTIONS OPTIONS 0.5 Vdc to 4.5 Vdc Output 1/8 in - 27 NPT Connector 4.0 mA to 20 mA Output 1/8 in - 27 NPT Connector SUPPLY VOLTAGE 5.0 Vdc 5.0 Vdc PRESSURE RANGE 0 psis to 1,000 psis 0 psis to 100 psis REFERENCE ML01KPS1PC ML100PS1PC 1/4 in - 18 NPT Connector SUPPLY VOLTAGE 5.0 Vdc PRESSURE RANGE 0 bar to 10 bar PRESSURE RANGE 0 psis to 100 psis REFERENCE ML100PS1PG 134 PRESSURE RANGE 0 psis to 100 psis 0 psis to 300 psis 0 bar to 60 bar SUPPLY VOLTAGE 9.5 Vdc to 35 Vdc 9.5 Vdc to 35 Vdc 9.5 Vdc to 35 Vdc PRESSURE RANGE 0 bar to 10 bar 0 psig to 200 psig REFERENCE ST010BG1SPGF ST200PG1SPGF PRESSURE RANGE 0 bar to 10 bar 0 bar to 2.5 bar 0 bar to 6.0 bar REFERENCE ST010BG2SPGF ST2R5BG2SPGF ST006BG2SPGF 0.5 Vdc to 4.5 Vdc Ratiometric Output 1/4 in - 18 NPT Connector SUPPLY VOLTAGE 5.0 Vdc 1/4 in - 18 NPT Connector SUPPLY VOLTAGE 9.5 Vdc to 35.0 Vdc 9.5 Vdc to 35.0 Vdc 9.5 Vdc to 35.0 Vdc SUPPLY VOLTAGE 9.5 Vdc to 35 Vdc 9.5 Vdc to 35 Vdc 1/4 in - 18 NPT Connector REFERENCE ML010BS2PC 4 mA to 20 mA Output 1/8 in - 27 NPT Connector SUPPLY VOLTAGE 9.5 Vdc to 35.0 Vdc 1/8-27 NPT* REFERENCE ML100PS2PG ML300PS2PG ML060BS2PG www.honeywell.com/sensing PRESSURE RANGE 0 psig to 50 psig REFERENCE ST050PG2SPCF PRESSURE SENSORS RIBBON CABLE .000 50,0 (2.0) NOMEX INSULATED VENT HOLE (GAUGE UNITS ONLY) 14,61 (0.575) 10,67 (0.42) 8,26 (0.325) Cell with Body Ring, 10 Vdc Excitation 19mm Series O 15,09 (0.594) W/ 2,54 (0.10) PIN SPACING RING I.D. (24 AWG EQUIV.) -OUT +OUT O 18,69 (0.736) O 16,51 (0.650) O 18,95 (0.746) A -IN O-RING GROOVE 1 +IN 4X 3,2 (0.125) O 16,98 (0.668) CKT CAVITY CERAMIC SHOWN (COMP. UNITS ONLY) The ICT stainless steel 19C and 19 Vacuum Gauge Series devices are designed for pressure applications that involve measurement of hostile media in harsh environments compatible with 316 stainless steel. The special Vacuum Gauge Series devices are specifically designed for applications that can be exposed to a vacuum. MEASUREMENT Gauge Gauge TIG WELD LOCATION GROOVE FOR AS568-016 O-RING PRESSURE RANGE 0 psig to 15 psig 0 psig to 5.0 psig REFERENCE 19C015PG1K 19C005PG1K 50,0 (2.0) NOMEX INSULATED RIBBON CABLE VENT HOLE (GAUGE UNITS ONLY) .000 1.5 mA or 10.0 Vdc Unamplified compensated -40 C to 125 C (-40 F to 257 F) 0 C to 82 C (32 F to 179 F) 98 mV to 102 mV 50,0 mm (2.0 in) Nomex ribbon cable 14,61 (0.575) 10,67 (0.42) 8,26 (0.325) Cell with Body Ring, 1.5 mA Excitation Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: Output type: Termination type: O 15,09 (0.594) W/ 2,54 (0.10) PIN SPACING RING I.D. (24 AWG EQUIV.) -OUT +OUT O 18,69 (0.736) O 16,51 (0.650) O 18,95 (0.746) A -IN O-RING GROOVE 1 +IN OPTIONS 4X 3,2 (0.125) O 16,98 (0.668) CKT CAVITY CERAMIC SHOWN (COMP. UNITS ONLY) TIG WELD LOCATION GROOVE FOR AS568-016 O-RING (0.870) MEASUREMENT Gauge Gauge Gauge Gauge .000 50,0 (2.0) NOMEX INSULATED RIBBON CABLE W/.2,54 (0.10) PIN SPACING (24 AWG EQUIV.) O.22,1 9,27 (0.365) VENT HOLE (GAUGE UNITS ONLY) 7,37 (0.290) 5,59 (0.220) 3,18 (0.125) 19 Vacuum Gauge Series - Flush Mount with Flange PRESSURE RANGE 0 psig to 100 psig 0 psig to 300 psig 0 psig to 3.0 psig 0 psig to 5.0 psig REFERENCE 19C100PG1L 19C300PG1L 19C003PG1L 19C005PG1L -OUT O.18,69(0.736) WELD RELIEF O.16,51 (0.650) O-RING GROOVE 1 Flush Mount with Flange 4X 3,2 (0.125) CERAMIC SHOWN (COMP. UNITS ONLY) EXPOSED DIAPHRAGM O.16,98 (0.668) CKT CAVITY GROOVE FOR AS568-016 O-RING VENT HOLE (GAUGE UNITS ONLY) 9,27 (0.365) +IN 50,0 (2.0) NOMEX INSULATED RIBBON CABLE W/.2,54 (0.10) PIN SPACING (24 AWG EQUIV.) O.22,1 (0.870) .000 O.18,95 (0.746) A -IN 7,37 (0.290) 5,59 (0.220) 3,18 (0.125) +OUT -OUT +OUT 1 +IN 4X 3,2 (0.125) CERAMIC SHOWN (COMP. UNITS ONLY) CKT CAVITY 19,0 (0.75) HEX GROOVE FOR AS568-016 O-RING PRESSURE RANGE 0 psig to 5.0 psig 1/8 in - 27 NPT -OUT +OUT -IN O 18,95 (0.746) A 50,0 (2.0) NOMEX INSULATED O 13,72 (0.54) 1 +IN CERAMIC SHOWN (COMP. UNITS ONLY) 4X 3,2 (0.125) O 16,98 (0.668) 1/4-18 NPT TIG WELD LOCATION CKT CAVITY STRIP CABLE W/ 2,54 (0.10) PIN SPACING (24 AWG EQUIV.) VENT HOLE (GAUGE UNITS ONLY) REFERENCE 19C005PG3K .000 .000 18,8 (0.74) 12,45 (0.49) 11,2 (0.44) 31,8 (1.23) 50,0 (2.0) NOMEX INSULATED STRIP CABLE W/ 2,54 (0.10) PIN SPACING (24 AWG EQUIV.) VENT HOLE (GAUGE UNITS ONLY) EXPOSED DIAPHRAGM O.16,98 (0.668) MEASUREMENT Gauge 1/4 in - 18 NPT O.18,69(0.736) WELD RELIEF O.16,51 (0.650) O-RING GROOVE O.18,95 (0.746) A -IN 11,43 (0.45) 9,9 (0.39) REFERENCE 19C015PV3K 17,78 (0.70) PRESSURE RANGE 0 psig to 15 psig 30,0 (1.22) MEASUREMENT Vacuum Gauge 19,0 (0.75) HEX -OUT O 4,34 (0.171) +OUT -IN O 18,95 (0.746) A 1 +IN MEASUREMENT Vacuum Gauge Vacuum Gauge PRESSURE RANGE 0 psig to 100 psig 0 psig to 15 psig REFERENCE 19C100PV5L 19C015PV5L CERAMIC SHOWN (COMP. UNITS ONLY) 4X 3,2 (0.125) O 16,98 (0.668) MEASUREMENT Gauge Gauge www.honeywell.com/sensing 1/8-27 NPT TIG WELD LOCATION CKT CAVITY PRESSURE RANGE 0 psig to 15 psig 0 psig to 300 psig O 4,34 (0.17) REFERENCE 19C015PG4K 19C300PG4K 135 PRESSURE SENSORS These ICT 13 mm stainless steel devices are designed for high pressure applications that involve measurement of hostile media in harsh environments. This series uses ICT's proven piezoresistive semiconductor sensor chip in an oil-isolated housing with or without an integral ceramic for temperature compensation and calibration. This design has proven to be highly reliable, stable, and accurate. 13mm Series Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: 1.5 mA or 10 Vdc Unamplified -40 C to 125 C (-40 F to 257 F) 0 C to 82 C (32 F to 179 F) OPTIONS -OUT (A) RING I.D. -OUT (A) .000 10,16 (0.40) 26,9 (1.06) 50,0 (2.0) NOMEX INSULATED STRIP CABLE W/ 2,54 (0.10) PIN SPACING (24 AWG EQUIV) -OUT IDENTIFIER O 8,56 (O 0.337 .000 9,8 (0.39) -OUT IDENTIFIER 5,84 (0.23) STRIP CABLE W/ 2,54 (.010) PIN SPACING (24 AWG EQUIV) 8,25 (0.325) 15,3 (0.60) 50,0 (2.0) NOMEX INSULATED 16,51 (0.65) 1/8 in - 27 NPT 50,0 mm (2.0 in) Nomex ribbon cable Compensated Series - Ring with Back Support 50,0 mm (2.0 in) Nomex ribbon 19,1 (0.75) HEX +OUT (B) +OUT (B) A A O 12,62 (0.497) O 19,0 (0.748) O 10,59 (0.417) O-RING GROOVE -IN (C) -IN (C) +IN (D) TIG WELD LOCATION MEASUREMENT TYPE Sealed Gauge Sealed Gauge Sealed Gauge PRESSURE RANGE 0 psi to 5,000 psi 0 psi to 3,000 psi 0 psi to 1,000 psi CKT CAVITY OUTPUT TYPE 148 mV to 152 mV 98 mV to 102 mV 98 mV to 102 mV REFERENCE 13C5000PS1L 13C3000PS1L 13C1000PS1L -OUT (A) MEASUREMENT TYPE Absolute PRESSURE RANGE 0 psi to 5,000 psi PIN NUMBERS REF. ONLY .000 11,94 (0.47) 18,29 (0.72) 29,2 (1.15) STRIP CABLE W/ 2,54 (0.10) PIN SPACING (24 AWG EQUIV) -OUT IDENTIFIER 1/8-27 NPT O 4,34 (O0.171) TIG WELD LOCATION OUTPUT TYPE 148 mV to 152 mV REFERENCE 13C5000PA4K Uncompensated Series Pin Connector 1/4 in - 18 NPT 50,0 mm (2.0 in) Nomex ribbon cable 50.0 (2.0) NOMEX INSULATED 4X 3,2 (0.13) O 11,91 (O0.469) O 15,67 (O0.617) O-RING GROOVE (10mm X 1.5mm O-RING NOT PROVIDED) 19,1 (0.75) HEX 6 5 4 +OUT (B) A 6X O0,51 (0.63) ON O 7,62 (0.30) PIN CIRCLE O19,0 (0.748) BALL WELD AREA -IN (C) .000 BACK SUPPORT 8,25 (0.325) 5,84 (0.23) 4X 3,2 (0.375) 10,16 (0.40) +IN (D) 20,3 (0.80) ecabl O 8,56 (O0.337) RING I.D. 1 2 O 10,59 (0.417) O 12,62 (0.497) 3 O-RING GROOVE (10mm X 1.5mm O-RING NOT PROVIDED) TIG WELD LOCATION +IN (D) O 11,91 (O0.469) CKT CAVITY MEASUREMENT TYPE Sealed Gauge Sealed Gauge Sealed Gauge 136 4X 3,2 (0.13) 1/4-18 NPT O 4,34 (O0.171) TIG WELD LOCATION PRESSURE RANGE 0 psi to 1,000 psi 0 psi to 5,000 psi 0 psi to 3,000 psi OUTPUT TYPE 98 mV to 102 mV 148 mV to 152 mV 98 mV to 102 mV MEASUREMENT TYPE Absolute Absolute REFERENCE 13C1000PS5L 13C5000PS5L 13C3000PS5L www.honeywell.com/sensing PRESSURE RANGE 0 psi to 1,000 psi 0 psi to 5,000 psi OUTPUT TYPE 175 mV to 300 mV 290 mV to 500 mV REFERENCE 13U1000PA0K 13U5000PA0K PRESSURE SENSORS SPT Series Signal conditioning: Compensated temperature range: Operating temperature range: Measurement type: Amplified and unamplified compensated -10 C to 85 C (14 F to 185 F) -40 C to 125 C (-40 F to 257 F) Absolute, Sealed, and Gauge 22,2 (0.875) HEX O20,7 (0.815) O13,72 .000 HEX O 10,29 (0.405) VENT TUBE (GAUGE UNITS ONLY) SUPPLY VOLTAGE 12.0 Vdc to 30.0 Vdc .000 11,0 (0.44) 12,45 (0.49) 18,8 (0.74) 72,8 (2.87) 4-CONDUCTOR CABLE 24 AWG CONDUCTORS SHIELDED, IN PAIRS, WITH DRAIN WIRE CUSTOMER SPECIFIED LENGTH (IN FEET) 22,2 (0.875) O 20,7 (0.815) 1/8-27 NPT TIG WELD LOCATION 19,0 (0.70) TIG WELD LOCATION OPTIONS 4mA to 20 mA Output 0,609 m (2 ft) 4-Conductor shielded pairs 10,0 (0.39) 4-CONDUCTOR CABLE 24 AWG CONDUCTORS SHIELDED, IN PAIRS, WITH DRAIN WIRE CUSTOMER SPECIFIED LENGTH (IN FEET) 11,42 (0.45) 17,77 (0.70) 1/8 in - 27 NPT 0,609 m (2 ft) 4-Conductor shielded pairs 1.0 Vdc to 5.0 Vdc Output 71,7 (2.82) The SPT stainless steel devices are designed for pressure applications that involve measurement of hostile media in harsh environments and will accommodate any media that will not adversely attack 304 or 316 stainless steel wetted parts. The SPT stainless steel devices are rugged and reliable transducers for use in a wide variety of pressure sensing applications where corrosive liquids or gases are monitored. PRESSURE RANGE 0 psi to 15 psi O 4,34 (O0.171) REFERENCE SPT4V0015PG4W02 1/4 in - 18 NPT 0,304 m (1 ft) 4-Conductor shielded pairs 1.0 Vdc to 5.0 Vdc Output PRESSURE RANGE 0 psi to 100 psi 0 psig to 5.0 psig REFERENCE STPMA0100PG5W02 SPTMA0005PG5W02 22,2 (0.875) HEX PIN D PIN B O 20,7 (0.815) O 13,72 (0.54) C PIN C 4 -PIN SHELL SIZE 8 BAYONET LOCK CONNECTOR RECEPTACLE SUPPLY VOLTAGE 10.0 Vdc TIG WELD LOCATION 13,2 (0.52) O 4,34 (O0.171) .000 PRESSURE RANGE 0 psig to 10 psig O 4,34 (O0.171) REFERENCE SPT4V0010PG5W01 1/4 in - 18 NPT 0,609 m (2 ft) 4-Conductor shielded pairs 1.0 Vdc to 5.0 Vdc Output SUPPLY VOLTAGE 12.0 Vdc to 30.0 Vdc PRESSURE RANGE 0 psi to 100 psi REFERENCE STP4V0100PG5W02 REFERENCE STPMA0100PG5B 7/16 in UNF 1.0 Vdc to 5.0 Vdc Output .000 10,0 (0.39) 11,42 (0.45) 17,77 (0.70) 1/8 in - 27 NPT - 0 mV to 100 mV Output 0,609 m (2 ft) 4-Conductor shielded pairs 71,7 (2.82) TIG WELD LOCATION 1/4-18 NPT TIG WELD LOCATION PRESSURE RANGE 0 psig to 100 psig 4-CONDUCTOR CABLE 24 AWG CONDUCTORS SHIELDED, IN PAIRS, WITH DRAIN WIRE CUSTOMER SPECIFIED LENGTH (IN FEET) 1/4-18 NPT TIG WELD LOCATION 4-CONDUCTOR CABLE 24 AWG CONDUCTORS SHIELDED, IN PAIRS, WITH DRAIN WIRE CUSTOMER SPECIFIED LENGTH (IN FEET) 22,2 (0.875) HEX 7,0 (0.28) .000 B 19,0 (0.70) 8,89 (0.35) A D 11,0 (0.44) (0.54) 15,24 (0.60) PIN A HEX O13,72 SUPPLY VOLTAGE 12.0 Vdc to 30.0 Vdc .000 11,0 (0.44) 12,45 (0.49) 18,8 (0.74) 72,8 (2.87) VENT HOLE (GAUGE UNITS ONLY) 22,2 (0.875) O20,7 (0.815) VENT TUBE (GAUGE UNITS ONLY) 1/4 in - 18 NPT - 0 mV to 100 mV Output Bayonet Connector 18,8 (0.74) O 4,34 (O0.171) 72,8 (2.87) TIG WELD LOCATION 69,2 (2.73) SUPPLY VOLTAGE 12.5 Vdc to 30.0 Vdc 12.5 Vdc to 30.0 Vdc 4-CONDUCTOR CABLE 24 AWG CONDUCTORS SHIELDED, IN PAIRS, WITH DRAIN WIRE CUSTOMER SPECIFIED LENGTH (IN FEET) 1/4-18 NPT TIG WELD LOCATION 19,0 (0.70) 12,45 (0.49) (0.54) VENT TUBE (GAUGE UNITS ONLY) 22,2 (0.875) HEX O20,7 (0.815) O 20,7 (0.815) O 10,29 (0.405) VENT TUBE (GAUGE UNITS ONLY) SUPPLY VOLTAGE 10.0 Vdc 19,0 (0.70) TIG WELD LOCATION PRESSURE RANGE 0 psi to 100 psi 1/8-27 NPT TIG WELD LOCATION VENT TUBE (GAUGE UNITS ONLY) 19,0 (0.70) TIG WELD LOCATION O 4,34 (O0.171) REFERENCE SPTMV0100PG4W02 7/16-20 UNF-2A GLAND PER MS33656 O4,34 (O0.171) TIG WELD LOCATION SUPPLY VOLTAGE 12.0 Vdc to 30.0 Vdc www.honeywell.com/sensing PRESSURE RANGE 0 psi to 200 psi REFERENCE SPT4V0200PG6W02 137 PRESSURE SENSORS 4.0 mA to 20.0 mA Output 1/2 in Male Face Seal Connector 1,83 m (6 ft) 2-Conductor Cable F1 Series MEASUREMENT TYPE Compound PRESSURE RANGE -14.7 psig to 250 psig REFERENCE F14WMV250CP 1/4 in Male Face Seal Bendix Male Connector All F1 pressure transducers are manufactured in our Class 10 clean room environment. Our flow-through pressure transducers are specifically designed for the semiconductor industry. Their long life, coupled with longterm stability, can greatly reduce or eliminate the need for zero and span adjustments. All Honeywell transducers are CE certified with EMI/RFI protection and are manufactured to an electropolished wetted surface finish of 5 micro inch Ra maximum. Approvals: Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: CE, FM 12 Vdc to 36.0 Vdc Amplified compensated -40 C to 85 C (-40 F to 185 F) 0 C to 70 F (32 F to 158 F) OPTIONS PRESSURE RANGE 0 psi to 1,000 psi -14.7 psig to 100 psig PRESSURE RANGE -14.7 psig to 100 psig -14.7 psig to 250 psig REFERENCE F14VMV100CB F14VMV250CB 1/4 in Male Face Seal 1,83 m (6 ft) 2-Conductor Cable MEASUREMENT TYPE Gauge Compound Compound PRESSURE RANGE -14.7 psig to 250 psig -14.7 psig to 250 psig 0 psi to 3,000 psi REFERENCE F14VM0250GP F14VMV250CP F14VMV3000CP 1/4 in Male Fixed by Female Face Seal Bendix Male Connector MEASUREMENT TYPE Compound 0 Vdc to 5.0 Vdc Output 1/4 in Male Face Seal Connector Bendix Male Connector MEASUREMENT TYPE Absolute Compound MEASUREMENT TYPE Compound Compound PRESSURE RANGE -14.7 psig to 7.0 psig REFERENCE F14VPV7BCB 1/4 in Male Fixed by Female Face Seal 1,83 m (6 ft) 2-Conductor Cable REFERENCE F15VM0100AB F15VMV100CB MEASUREMENT TYPE Compound PRESSURE RANGE -14.7 psig to 100 psig REFERENCE F14VPV100CP 1/4 in OD 0.035 wall, 1/4 in long tube stub Bendix Male Connector MEASUREMENT TYPE Compound PRESSURE RANGE -14.7 psig to 100 psig REFERENCE F14TV4V100CB OPTIONAL 1/4" fittings 23,5 (0.93) Tube stub ends 21,5 (0.74) typ. 24,1 24,1 (0.96) 82,0 (3.23) (0.96) typ. 56,0 (2.24) 77,0 max. (3.20) 77,0 max. (3.20) 52,0 (2.43) 1/4 female face seal 1/4 male face seal 6,3 (0.25) 11,0 (0.44) 0.035 typ. 24,1 (0.96) typ. 47,0 (1.86) 1/4 tube stub 24,1 (0.96) 82,0 (3.23) 1/4 male face seal swivel 138 21,0 (0.83) 11,0 (0.43) typ. www.honeywell.com/sensing 12,0 (0.50) 11,0 (0.44) 24,1 (0.96) typ. 47,0 (1.86) 1/2 tube stub .05 typ. 9,3 (0.37) 11,0 (0.44) 24,1 (0.96) typ. 47,0 (1.86) 3/8 tube stub 0.035 typ. PRESSURE SENSORS OPTIONS S1 Series VF 1/4 in Female Face Seal Bendix Male Connector MEASUREMENT TYPE Compound PRESSURE RANGE -14.7 psig to 100 psig REFERENCE S14VFV100CB VM 1/4 in Male Face Seal Bendix Male Connector All S1 pressure transducers are manufactured in our Class 10 clean room environment. Our single port pressure transducers are specifically designed for the semiconductor industry. Their long life, coupled with long-term stability, can greatly reduce or eliminate the need for zero and span adjustments. All Honeywell transducers are CE certified with EMI/RFI protection and are manufactured to an electropolished wetted surface finish of 5 micro in Ra maximum. Approvals: Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: Output type: CE, FM 12.0 Vdc to 36.0 Vdc Amplified compensated -40 C to 85 C (-40 F to 185 F) 0 C to 70 C (32 F to 158 F) 4 mA to 20 mA MEASUREMENT TYPE Compound Compound PRESSURE RANGE -14.7 psig to 100 psig -14.7 psig to 250 psig REFERENCE S14VMV100CB S14VMV250CB VM 1/4 in Male Face Seal 1,83 m (6 ft) 2-Conductor Cable MEASUREMENT TYPE Gauge Compound PRESSURE RANGE 0 psi to 3,000 psi 0 psi to 3,000 psi REFERENCE S14VM3000GP S14VMV3000CP VS 1/4 in Male Face Seal, Swivel Bendix Male Connector 20,3 (0.80) 20,3 (0.80) MEASUREMENT TYPE Compound Compound Compound Compound Compound Compound PRESSURE RANGE -14.7 psig to 100 psig -14.7 psig to 250 psig -14.7 psig to 100 psig -14.7 psig to 100 psig -14.7 psig to 100 psig -14.7 psig to 100 psig REFERENCE S14VSV100CB S14VSV250CB S14VSV1755BCB S14VSV210BCB S14VSV70BCB S14VSV7BCB 67,5 typ. (2.74) 116,9 max. (4.60) VS 1/4 in Male Face Seal, Swivel 1,83 m (6 ft) 2-Conductor Cable 106,7 max. (4.20) MEASUREMENT TYPE Compound Compound .30 typ 30,4 (1.20) .80 across flats typ. PRESSURE RANGE -14.7 psig to 100 psig -14.7 psig to 100 psig REFERENCE S14VSV210BCP S14VSV70BCP 30,4 (1.20) 23,6 (0.93) 23,6 (0.93) 1/4" male swivel with pigtail 1/4" male swivel with Bendix Fitting Options 10,9 (0.43) 30,4 (1.20) 15,4 (0.61) 0.035 typ. 23,6 (0.93) 1/4" female face seal 23,6 (0.93) 1/4" tube stub 23,6 (0.93) 1/4" male face seal www.honeywell.com/sensing 139 PRESSURE SENSORS TLD Series With space at a premium in semiconductor gas distribution systems, the Series TLD pressure transducer with local display offers an integrated solution that reduces the overall height of the transducer/display assembly to as little as 3.5 in [88,9 mm]. To accomplish this, the transducer's signal amplifier is mounted within the display, with the added benefit of zero and span adjustments conveniently located on the LED display face. Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: Termination type: 12.0 Vdc to 30.0 Vdc Amplified compensated -40 C to 85 C (-40 F to 185 F) 0 C to 70 C (32 F to 158 F) 1,83 m (6 ft) 2-conductor cable OPTIONS Flow-through/Output Signal 4 mA to 20 mA MEASUREMENT TYPE Compound Compound Compound PRESSURE RANGE -14.7 psig to 100 psig -14.7 psig to 100 psig -14.7 psig to 100 psig CONNECTIONS 1/4 in. OD 0.035 in. wall, 1/4 in long tube stub 1/4 in. female face seal, swivel 1/4 in. female face seal, swivel REFERENCE TLDF4CVT4V100CP TLDF4CVVFV100CP TLDF4BSVFV100CP Flow-through/Output Signal 0 Vdc to 5.0 Vdc MEASUREMENT TYPE Compound PRESSURE RANGE -14.7 psig to 100 psig CONNECTIONS 1/4 in. OD 0.035 in. wall, 1/4 in long tube stub REFERENCE TLDF5CVT4V100CP Single Port/Output Signal 4 mA to 20 mA MEASUREMENT TYPE Compound PRESSURE RANGE -14.7 psig to 100 psig REFERENCE TLDS4BNVFV100CP 1/4 in. female face seal, swivel Flow-through display orientation and transducer location 35,9 1.42 38,1 1.50 26,1 1.03 38,1 1.50 z 38,1 1.50 z s 82,5 3.25 s 38,1 1.50 CABLE 2 COND 1,8 m (6 CVft)- 72,4 2.85 Transducer at center back, vertical display orientation 38,1 1.50 BS - Transducer at bottom, side display orientation 38,1 1.50 z CH - Transducer at center back, horizontal display orientation 35,9 1.42 38,1 1.50 26,1 1.03 38,1 1.50 82,5 3.25 72,4 2.85 z s CABLE 2 COND 1,8 m (6 ft) BF - Transducer at bottom, front display orientation 140 s www.honeywell.com/sensing 42,7 1.68 77,0 3.03 CABLE 2 COND 1,8 m (6 ft) PRESSURE SENSORS TLD Series (continued) Single port display orientation and transducer location 38,1 1.50 z 35,9 1.42 s 38,1 1.50 42,7 1.68 47,0 1.85 38,1 1.50 26,1 1.03 z 4,57 0.18 11,2 0.44 38,1 1.50 CABLE 2 COND 1,8 m (6 ft) 100,9 3.97 Flow-through connection options s CABLE 2 COND 1,8 m (6 ft) 6,4 0.25 24,1 0.95 T4 - 1/4 in tube stub BN - Transducer at bottom CN - Transducer at center back 75,2 2.96 VF - 1/4 in female face seal Single port connection options 56,9 2.24 11,2 0.44 32,9 1.29 VM - 1/4 in male face seal 24,1 0.95 32,3 1.27 VM - 1/4 in male face seal VF - 1/4 in female face seal 81,5 3.21 10,9 0.43 32,3 1.27 VS - 1/4 in male face seal, swivel VS - 1/4 in male face seal, swivel 6,4 0.25 T4 - 1/4 in tube seal 4,57 0.18 www.honeywell.com/sensing 141 PRESSURE SENSORS The Bonded Element general-purpose industrial pressure transducers were developed for a variety of pressure applications and industries, providing excellent media compatibility with all stainless steel wetted parts. It is the ideal choice for applications where both media compatibility and high cycle life are essential Bonded Element Series Supply voltage: Signal conditioning: Operating temperature range: Compensated temperature range: Output type: Termination type: 4.75 Vdc to 5.25 Vdc Amplified -40 C to 125 C (-40 F to 257 F) -20 C to 85 C (-4 F to 185 F) 0.5 V to 4.5 V Ratio-metric GT 150 Series - 3 pin OPTIONS SS Housing - 1/4 in NPT SS Housing - 1/8 in NPT V out COMMON GT 150 SERIES - 3 PIN MEASUREMENT TYPE Gauge STAINLESS STEEL HOUSING 1,37 [0.05] 0,60 [0.02] PRESSURE RANGE 0 psig to 125 psig +V 0,95 [0.04] 0,95 [0.04] GT 150 SERIES - 3 PIN PLATED CRS HOUSING V out COMMON +V 1,37 [0.05] 0,42 [0.016] 1/4-18NPT REFERENCE BE-4R125PG5DS 1/8-27 NPT MEASUREMENT TYPE Gauge PRESSURE RANGE 0 psig to 500 psig REFERENCE BE-4R500PG4DS SS Housing - 7/16 in - 20 UNF CRS Housing - 1/4 in NPT V out V out COMMON COMMON +V +V 0,95 [0.04] 0,95 [0.04] GT 150 SERIES - 3 PIN GT 150 SERIES - 3 PIN PLATED CRS HOUSING STAINLESS STEEL OR PLATED CRS HOUSING 0.43 [0.015] 0,60 [0.02] MEASUREMENT TYPE Gauge PRESSURE RANGE 0 psig to 125 psig 1,37 [0.05] 1,37 [0.05] 1/4-18NPT REFERENCE BE-4R125PG5DC GLAND PER MS33656 (3-904 O-RING SEAL NOT PROVIDED) 7/16-20UNF MEASUREMENT TYPE Gauge PRESSURE RANGE 0 psig to 5,000 psig CRS Housing - 7/16 in - 20 UNF COMMON REFERENCE BE-4R5000PG6DS V out +V 0,95 [0.04] GT 150 SERIES - 3 PIN STAINLESS STEEL OR PLATED CRS HOUSING 0.43 [0.015] 1,37 [0.05] GLAND PER MS33656 (3-904 O-RING SEAL NOT PROVIDED) 7/16-20UNF MEASUREMENT TYPE Gauge 142 www.honeywell.com/sensing PRESSURE RANGE 0 psig to 5,000 psig REFERENCE BE-4R5000PG6DC SENSING AND CONTROL PRODUCTS HONEYWELL SENSING AND CONTROL PRODUCTS Selecting the right sensor or switch for your application has never been easier. Honeywell Sensing and Control has one of the broadest product ranges of any supplier in the world, and the depth of our technology and product lines ensure that we are able to supply you with the right product for most applications. We also have the outstanding technical support staff and responsive service to back this up, so you can always find what you need, when you need it. We aim to supply on time, every time, anywhere in the world. Honeywell - Taking the risk and high costs out of system critical sensing and control. You can find out more about Honeywell's extensive product range by visiting our website at www.honeywell.com/sensing There you can browse our interactive catalogue and discover our full range of products for use in Industrial, Automotive, Aviation, Transportation, Motion Control, Medical applications and more. Some of our more popular product families include: Accelerometers Infrared Sensors Utilizing Quartz Flexure and Resonating Beam technologies for inertial, control, and industrial applications. Optoelectronic standard infrared emitting diodes (IREDs), sensors and assemblies for object presence, limit, and motion sensing, position encoding, and movement counting. Automotive Sensors Speed and position sensors for engine management, wheel speed sensors, and position sensors for comfort, convenience, and motor control applications. Limit and Enclosed Switches Basic Switches Liquid Level Sensors Standard size, miniature, subminiature, hermetically sealed, and high temperature snap-action switches for applications requiring compactness, light weight, accurate repeatability and long life. Basic and industrial (designed for harsh industrial environments) liquid level sensors used to indicate the presence or absence of liquid. Heavy duty limit switches, enclosed switches (precision snap-acting switches sealed in rugged metal housing) and sealed and explosion-proof switches. Mass Airflow Sensors Current Sensors Adjustable linear, null balance, digital, and linear output current sensors for monitoring ac or dc current. Amplified and unamplified microbridge mass airflow sensors provide a sensitive and fast response to the flow of air or other gas over the chip. Off-Highway Vehicular Lighting Electronic and Electromechanical Safety products for Machine Safeguarding Safety light curtains, laser scanners, mats, door interrupt devices and single and multi-beam optoelectronic devices for industrial machine safety. Safety interlock switches, limit switches and cable-pull limit switches for industrial machine safety. Safety control modules for industrial machine safety. Environment Sealed Switches and Sensors Designed for use in the harsh environments encountered in aerospace, transportation, ordnance and marine applications. Fibre Optic Sensors Active optoelectronic components and sub-assemblies (LEDs/transmitters, fiber-DIPs, receivers and modules) for the datacom market. Force Sensors Precise reliable performance in compact commercial grade packaging. Hour Meters Honeywell's Hobbs brand products are designed for elapsed time measurement for testing, leasing, maintenance and warranty programs. The meter family includes LCD, Counter, Battery Controller, AC Electro-Mechanical and DC Electro-Mechanical. Humidity Sensors Honeywell's Hobbs brand halogen sealed beams, composites, custom designer lights, specialty lighting and indicator modules for vehicular and non-vehicular applications. Position Sensors Hall-effect, magnetoresistive, and potentiometric devices for detecting the presence of a magnetic field or linear and rotary position. Pressure Sensors Stainless steel and silicon pressure sensors depending on the application, as well as a variety of high purity pressure sensors. Proximity Sensors Severe environment proximity sensors designed for use in applications with particularly demanding requirements on temperature, vibration, shock, and EMI/lightning resistance. Pushbuttons, Keyswitches and Indicators MICRO SWITCH brand pushbuttons, keyswitches, and indicators for use anywhere manual operation is desired. Railway Sensors and Control Systems Railwheel proximity sensors, interface modules, train departure control systems, solid state sensors, pressure sensors and electromechanical switches for on-board and off-board rail industry applications. Relative humidity/temperature and relative humidity sensors in chemically resistant packages to accommodate harsh environments. www.honeywell.com/sensing 1 INTRODUCTION SENSING AND CONTROL PRODUCTS Relays Turbidity Sensors General-purpose power relays and relay sockets designed for a wide range of applications that require stability and reliability. Wash process turbidity sensors to improve product quality, minimize ingredient consumption, and reduce wastewater discharge in commercial and industrial bath applications. Resolvers Absolute position sensors which provides high angular accuracy, high resolution and repeatability under severe environmental conditions. Ultrasonic Sensors Temperature Sensors Ultrasonic position sensors for presence/absence sensing, precision distance sensing or tracking for areas where other sensing technologies have difficulty, such as clear or shiny objects, foggy or particle laden air, or splashing liquids. Platinum- and silicon-based thin film resistance temperature devices (RTDs) for applications that require small package size, accuracy, and linear outputs. VCSEL Products Thermal Products Vertical Cavity Surface Emitting Laser sensors for high speed data communication applications and a wide variety of sensor applications. Bimetal thermostats, Discrete and Packaged Thermistors, Precision Hi-Rel Negative Temperature Coefficient (NTC) Thermistors., Thermal cut offs and Flexible Heaters Thermocouples, Non-contact probes and RTDs Megopak thermocouples, thermocouples with protecting tubes, Radiamatic/ Rayotube Sensors, and the platinum RTD 100 Ohm. Toggle and Rocker Switches MICRO SWITCH brand toggles, rockers and paddle switches for use anywhere manual operation is desired. Military grade and environment sealed options are available. VRS Speed and Timing Sensors Completely self-powered, VRS (magnetic) sensors are simple, rugged devices that do not require an external voltage source for operation. They are generally used to provide speed, timing or synchronization data to a display (or control circuitry) in the form of a pulse train. This list of our products is not exhasustive, so check out our full range at www.honeywell.com/sensing HONEYWELL'S SENSOTEC RANGE OF SPECIALIST TEST AND MEASUREMENT PRODUCTS The Honeywell Sensotec product range of industrial pressure transducers, load cells and electronic sensor instrumentation is one of the broadest in the world. We have a comprehensive range of strain gauge based, piezoelectric and coil wound transducers. We offer pressure ranges to 170,000 psi and load ranges to 3 million pounds with complete instrumentation and signal conditioning. We achieve accuracies of 0.05 in pressure sensing, and our calibration load cells have accuracies of 0.002 %. Our unique expertise is in the packaging of our sensor technology, but we can provide you with reliable engineered solutions whether they are standard offthe-shelf transducers developed for general applications or sensors developed to meet unique requirements. The Sensotec range of transducers can be designed to withstand the harshest environments such as temperatures as low as -325 F or as high as +425 F, or ambient conditions up to 10,000 ft of seawater. For more information about these products visit www.honeywell.com/sensotec 2 www.honeywell.com/sensing Sales and Service Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorised Distributor or Sales Representative, contact your local sales office or: INTERNET: www.honeywell.com/sensing E-mail: info.sc@honeywell.com ASIA PACIFIC EUROPE Control Products Asia Pacific Headquarters Phone: +(65) 6355-2828 Fax: +(65) 6445-3033 South Korea Honeywell Korea Co Ltd Phone: +(822) 799-6167 Fax: +(822) 792-9013 Australia Honeywell Limited Phone: +(61) 2-9370-4500 FAX: +(61) 2-9370-4525 Toll Free 1300-36-39-36 Toll Free Fax: 1300-36-04-70 Malaysia Honeywell Engineering Sdn Bhd Phone: +(60-3) 7958-4988 Fax: +(60-3) 7958-8922 China - PRC - Beijing Honeywell China Inc. Phone: +(86-10) 8458-3280 Fax: +(86-10) 8458-3102 China - PRC - Shanghai Honeywell China Inc. Phone: (86-21) 6237-0237 Fax: (86-21) 6237-1237 China - Hong Kong S.A.R. Honeywell Ltd. Phone: +(852) 2953-6412 Fax: +(852) 2953-6767 Indonesia Honeywell Indonesia Pte Ltd. Phone: +(62) 21-535-8833 FAX: +(62) 21-5367 1008 India TATA Honeywell Ltd. Phone: +(91) 20 6870 445/ 446 Fax: +(91) 20 681 2243/ 687 5992 Japan Honeywell Inc Phone: +(81) 3 5440 1425 Fax: +(81) 3 5440 1368 New Zealand Honeywell Limited Phone: +(64-9) 623-5050 Fax: +(64-9) 623-5060 Toll Free (0800) 202-088 Philippines Honeywell Systems (Philippines) Inc. Phone: +(63-2) 636-1661 / 1662 Fax: +(63-2) 638-4013 Singapore Honeywell South East Asia Phone: +(65) 6355-2828 Fax: +(65) 6445-3033 Thailand Honeywell Systems (Thailand) Ltd. Phone: +(662) 693-3099 FAX: +(662) 693-3085 Taiwan R.O.C. Honeywell Taiwan Ltd. Phone: +(886-2) 2245-1000 FAX: +(886-2) 2245-3242 Austria Honeywell Austria GmbH Phone: +(43) 1 727 80 366/ 246 FAX: +(43) 1 727 80 337 Belgium Honeywell SA/NV Phone: +(32) 2 728 2522 FAX: +(32) 2 728 2502 NORTH AMERICA LATIN AMERICA Portugal Honeywell Portugal Lda Phone: +(351 21) 424 50 00 FAX: +(351 21) 424 50 99 Canada Honeywell LTD Phone: 1-800-737-3360 FAX: 1-800-565-4130 Argentina Honeywell S.A.I.C. Phone: +(54-11) 4383-3637 FAX: +(54-11) 4325-6470 Romania Honeywell Bucharest Phone: +(40) 1 2110076 FAX: +(40) 1 2103375 USA Honeywell Control Products, International Headquarters Phone: 1-800-537-6945 1-815-235-6847 FAX: 1-815-235-6545 E-mail: info.sc@honeywell.com Brazil Honeywell do Brasil & Cia Phone: +(55-11) 7266-1900 FAX: +(55-11) 7266-1905 Bulgaria Honeywell EOOD Phone: +(359) 2 979 00 23 FAX: +(359) 2 979 00 24 Commonwealth of Independent States (CIS) Z.A.O. Honeywell Phone: +(7 095) 796 98 36 FAX: +(7 095) 797 99 06 Czech Republic Honeywell spol. s.r.o. Phone: +(420) 261 123 457 FAX: +(420) 261 123 461 Slovak Republic Honeywell s.r.o. Phone: +(421 2) 58 247 403 FAX: +(421 2) 58 247 415 Denmark Honeywell A/S Phone: +(45) 39 55 55 55 FAX: +(45) 39 55 55 58 South Africa (Republic of) Honeywell Southern Africa Honeywell S.A. Pty. Ltd Phone: +(27) 11 695 8000 FAX +(27) 11 805 1504 Finland Honeywell OY Phone: +(358) 9 3480101 FAX: +(358) 9 34801375 France Honeywell SA Phone: +(33) 1 60 19 80 40 FAX: +(33) 1 60 19 81 73 Germany Honeywell AG Phone: +(49) 69 8064 444 FAX: +(49) 69 8064 442 Hungary Honeywell Kft. Phone: +(361) 451 43 00 FAX: +(361) 451 43 43 Italy Honeywell S.p.A. Phone: +(39) 02 92146 450/ 456 FAX: +(39) 02 92146 490 The Netherlands Honeywell B.V. Phone: +(31) 20 565 69 11 FAX: +(31) 20 565 66 00 Norway Honeywell A/S Phone: +(47) 66 76 20 00 FAX: +(47) 66 76 20 90 Poland Honeywell Sp. zo.o Phone: +(48) 606 09 64 FAX: +(48) 606 09 01 Spain Honeywell S.A. Phone: +(34) 91 313 6100 FAX: +(34) 91 313 6129 Sweden Honeywell AB Phone: +(46) 8 775 55 00 FAX: +(46) 8 775 56 00 Switzerland Honeywell AG Phone: +(41) 1 855 24 40 FAX: +(41) 1 855 24 45 Chile Honeywell Chile, S.A. Phone: +(56-2) 233-0688 FAX: +(56-2) 231-6679 Columbia Honeywell Columbia, S.A. Phone: +(57-1) 623-3239/ 3051 FAX: +(57-1) 623-3395 Ecuador Honeywell S.A. Phone: +(593-2) 981-560/1 FAX: +(593-2) 981-562 Mexico Honeywell S.A. de C.V. Phone: +(52) 55 5259-1966 FAX: +(52) 55 5570-2985 Puerto Rico Honeywell Inc. Phone: +(809) 792-7075 FAX: +(809) 792-0053 Venezuela Honeywell CA Phone: +(58-2) 238-0211 FAX: +(58-2) 238-3391 Turkey Honeywell Turkey A.S. Phone: +(90) 216 5756620 FAX: +(90) 216 5756637 Ukraine Honeywell Phone: +(380) 44 201 44 74 FAX: +(380) 44 201 44 75 United Kingdom Honeywell Control Systems Ltd Phone: +(44) 1698 481481 FAX: +(44) 1698 481276 Mediterranean & African Distributors Honeywell SpA Phone: +(39) 2 921 46 232 FAX: +(39) 2 921 46 233 Middle East Headquarters Honeywell Middle East Ltd. Phone: +(9712) 443 2119 FAX +(9712) 443 2536 Inside back cover www.honeywell.com/sensing 3 Warranty/Remedy Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. YOUR HONEYWELL CONTACT: 1-800-537-6945 1-815-235-6847 info.sc@honeywell.com www.honeywell.com/sensing This publication does not constitute a contract between Honeywell and its customers. The contents may be changed at any time without notice. It is the customer's responsibility to ensure safe installation and operation of the products. Detailed mounting drawings of all products illustrated are available on request. (c) 2003 Honeywell International Inc. Sensing and Control Honeywell Inc 11 West Spring Street Freeport, Illinois 61032 USA Honeywell Control Systems Ltd Newhouse Industrial Estate Motherwell ML1 5SB Scotland, UK www.honeywell.com/sensing 100456-EN Issue 1 07/03 UK07 GLO Printed on environmentally friendly paper