F2 Compression System 188 System integration * Designed for indoor enclosures * Operates outside the enclosure's seal * Installs close to the door edge * System engages when door is up to 15 mm (.59 in) away from the closed position Rod assembly Upper latch position with actuator closed Latch stud location Upper latch position during installation Notes One complete system consists of: One actuator assembly (see page 189) Two rod assemblies (see pages 190-191) Keepers (quantity depends on no. of latches specified; see page 191) Keeper Actuator assembly Upper keeper Door Order each component separately Bezel Actuator mechanism Handle cover Frame Roller end of keeper is always oriented towards actuator. Lower keeper Lower latch position during installation Lower latch position with actuator closed Latch stud location Latches slide along rod and engage/disengage keepers as actuator is raised/lowered. Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/F2 Dimensions in millimeters (inch) unless otherwise stated F2 Compression System 189 Surface and flush actuators Surface Actuator Flush Actuator 21.7 (.85) 13.1 (.52) 6.5 (.26) 290 (11.41) Material and Finish 185 (7.28) 29.5 (1.16) * Designed for indoor enclosures * Operates outside the enclosure's seal * System engages when door is up to 15 mm (.59 in) away from the closed position PC/ABS plastic, black Zinc alloy and steel, zinc plated Performance Details 213 (8.39) Max. static load: 100 N (22 lbf) per latch point 500 N (112 lbf) for entire system ACTUAL SIZE 33 (1.3) ACTUAL SIZE 19.20.2 (.756.008) Flammability rating: UL94-VO for all plastic components 40 (1.57) 82 (3.2) 44.5 (1.75) Actuator centerline O 5.40.1 (.213.004) 2 x R32 100.1 4 x R3(.394.004) Actuator centerline 4 x R3 100 (3.94) Actuator Centerline Plain key SC001 (2 keys per ring) Part number: FK-KEY-SC001 8.30.5 (6.33.02) 2001 (7.87.04) 2000.5 (7.87.02) 1801 (7.09.04) 8.30 (.330) 185.60.5 (7.3.02) 33.80.5 (1.33.02) Flat key keyed alike CH751 (2 keys per ring) Part number: PK-10-01 Overmolded key keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05 2 x R32 185.60.5 (7.30.02) Accessories 2000.5 (7.87.02) Part Number Actuator only see table 2 x M5 press in stud 17mm from inside of door 80.5 (.32.02) 5.40.1 (.213.004) R 1.5 (.06) Max. 2 x M5 press in stud 17 (.67) long from inside of door Lock Style Surface Actuator Part Number Flush Actuator Part Number Non-locking F2-20-17 F2-20-12 Key-locking keyed alike SC001 (two keys supplied) F2-20-18 F2-20-13 Key-locking keyed alike CH751 (two keys supplied) F2-20-19 ~ Dimensions in millimeters (inch) unless otherwise stated One complete system consists of: One actuator assembly (see page 189) Two rod assemblies (see pages 190-191) Keepers (quantity depends on no. of latches specified; see page 191) Order each component separately Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/F2 F2 Compression System 190 Rod assembly * High compression * Multiple lengths and latching point locations * Latching mechanisms engage keepers when door is up to 15 mm (.59 in) away from the closed position Keeper Door Frame Material and Finish PC/ABS plastic black, zinc alloy and steel, zinc plated Rod assemby 422 (16.614) 500 (19.69) 547 (21.535) 625 (24.61) 672 (26.457) 750 (29.53) 797 (31.378) 875 (34.45) 922 (36.299) 125 (4.92) Actuator centerline Stud must be positioned within 0.2 (.008) of nominal Part Number High compression rod assembly only see table One complete system consists of: One actuator assembly (see page 189) Two rod assemblies (see pages 190-191) Keepers (quantity depends on no. of latches specified; see page 191) Order each component separately Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/F2 - No Latch Point - Latch Point - Actuator Connection - Latch Stud Location Dimensions in millimeters (inch) unless otherwise stated F2-10-875-37 375 (14.76) 297 (11.693) F2-10-750-36 297 (11.693) M5 Stud location F2-10-750-26 250 (9.84) 672 (26.457) 625 (24.61) F2-10-625-25 172 (6.772) Part Number F2-10-500-14 125 (4.92) M5 Stud location Latched F2-10-375-13 Rod Length Latch Installation Stud Locations from Centerline of Actuator F2-10-375-3 Latch installation stud is not supplied. Use M5 press-in studs or non-flanged weld studs. Length is 6 (.24) to 10 (.39) Maximum, measured from inside surface of the door. Example: F2-10-625-25 Engaged F2-10-250-2 Unlatched F2-10-125-1 Installation Notes F2 Compression System 191 Rod assembly * Flexible Rod and Cam Assembly * Flexible mounting options Latch point Material and Finish Glass-filled nylon black, brass and steel, zinc plated Rod Shoulder nut Washer Cam Part Number Rod length Rod and cam assembly only see table Cam Assembly Part Number Hardware pack assembly contains 1 x cam, washer and shoulder nut (order 1 hardware pack per latching point) F2-50-1 Rod Length Rod Part Number 125 (4.92) F2-11-125-19 250 (9.84) F2-11-250-19 375 (14.76) F2-11-375-19 500 (19.69) F2-11-500-19 625 (24.61) F2-11-625-19 750 (29.53) F2-11-750-19 875 (34.45) F2-11-875-19 The complete system consists of: One actuator assembly (see page 189) Two rod assemblies (see pages 190-191) Keepers (quantity depends on no. of latches specified; see page 191) Order each component separately Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/F2 F2 Compression System Keeper Keeper Frame Keeper 3.5 (.14) Grip * Keeper roller provides for smooth operation 41.3 (1.63) X Notes Order one keeper per latching point Part Number Keeper only see table Door Gasket 18 (.71) Rod Rod System Compatibility Grip Part Number X High Compression Flexible 15 (.59) 19 (.75) 20 (.79) 22 (.87) F2-30-15 F2-30-19 F2-30-20 F2-30-22 11.5 (.45) 15.5 (.61) 16.5 (.65) 18.5 (.73) 25 (.98) F2-30-25 21.5 (.85) ~ Dimensions in millimeters (inch) unless otherwise stated One complete system consists of: One actuator assembly (see page 189) Two rod assemblies (see pages 190-191) Keepers (quantity depends on no. of latches specified; see page 191) Order each component separately Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/F2