Document 378-1 Shielded Power Inductors - MSS1038 * 10.0 x 10.2 mm footprint; 3.8 mm high shielded inductors * Very low DCR and excellent current handling Designer's Kit C391 contains 3 each of all values. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant matte tin over nickel over copper. Other terminations available at additional cost. Weight: 1.5 g Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 250/7 reel; 1000/13 reel; Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 4.3 mm pocket depth PCB washing Tested with pure water or alcohol only. For other solvents, see Doc787_PCB_Washing.pdf. DCR Inductance2 max Part number1 (H) (m) MSS1038-102NL_1.0 30% 6.0 MSS1038-152NL_1.5 30% 8.1 MSS1038-252NL_2.5 30% 10 MSS1038-382NL_3.8 30% 13 MSS1038-522NL_5.2 30% 22 MSS1038-702NL_7.0 30% 27 MSS1038-103NL_10 30% 35 MSS1038-123ML_12 20% 41 MSS1038-153ML_15 20% 50 MSS1038-183ML_18 20% 65 MSS1038-223ML_22 20% 73 MSS1038-273ML_27 20% 89 MSS1038-333ML_33 20% 93 MSS1038-393ML_39 20% 112 MSS1038-473ML_47 20% 128 MSS1038-563ML_56 20% 180 MSS1038-683ML_68 20% 213 MSS1038-823ML_82 20% 261 MSS1038-104ML_ 100 20% 304 MSS1038-124KL_ 120 10% 380 MSS1038-154KL_ 150 10% 506 MSS1038-184KL_ 180 10% 582 MSS1038-224KL_ 220 10% 756 MSS1038-274KL_ 270 10% 926 MSS1038-334KL_ 330 10% 1090 MSS1038-394KL_ 390 10% 1141 MSS1038-474KL_ 470 10% 1243 MSS1038-564KL_ 560 10% 1696 MSS1038-684KL_ 680 10% 1926 MSS1038-824KL_ 820 10% 2596 MSS1038-105KL_ 1000 10% 2853 Isat (A)4 Irms (A)5 SRF typ3 10% 20% 30% 20C 40C (MHz) drop drop drop rise rise 138 9.00 11.16 12.10 7.30 10.00 81 7.40 9.48 11.06 5.60 7.85 61 5.70 7.62 9.26 4.65 6.65 45 4.94 6.50 7.64 4.25 6.05 37 3.96 5.28 6.14 3.60 5.10 33 3.62 4.74 5.60 3.10 4.35 29 3.04 3.90 4.52 2.90 4.05 25 2.72 3.48 4.04 2.85 4.00 21 2.84 3.44 3.86 2.70 3.80 18 2.44 3.10 3.52 2.25 3.35 15 2.34 2.94 3.30 1.90 2.85 15 1.98 2.48 2.84 1.65 2.35 13 1.84 2.34 2.62 1.60 2.30 12 1.60 2.04 2.34 1.55 2.25 11 1.60 1.98 2.22 1.45 2.20 11 1.48 1.84 2.04 1.40 1.85 10 1.32 1.62 1.82 1.15 1.75 8 1.12 1.42 1.60 1.09 1.50 6 1.02 1.30 1.46 1.05 1.45 6 0.95 1.18 1.34 0.85 1.25 6 0.89 1.10 1.22 0.80 1.20 5 0.89 1.02 1.16 0.71 0.98 5 0.72 0.88 0.99 0.70 0.97 4 0.66 0.81 0.91 0.65 0.86 4 0.59 0.73 0.82 0.50 0.69 4 0.51 0.65 0.74 0.49 0.65 3 0.50 0.62 0.70 0.45 0.63 3 0.43 0.53 0.56 0.43 0.59 3 0.38 0.48 0.52 0.36 0.50 3 0.37 0.46 0.49 0.34 0.47 3 0.35 0.43 0.46 0.33 0.45 1. Please specify termination and packaging codes: MSS1038-105KLC Termination: L = RoHS compliant matte tin over nickel over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1000 parts per full reel). 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. SRF measured using an Agilent/HP 8753D or equivalent. 4. DC current at which the inductance drops the specified amount from its value without current. 5. Current that causes the specified temperature rise from 25C ambient. 6. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 378-1 Revised 08/01/11 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 378-2 Shielded Power Inductors - MSS1038 Typical L vs Current Typical L vs Frequency 10000 10000 1000 H 270 H 100 H 100 1000 H 1000 Inductance (H) Inductance (H) 1000 27 H 10 H 10 270 H 100 H 100 27 H 10 H 10 1.5 H 1 0.01 1.5 H 1 0.1 10 1 0.01 100 90 Dash number 123 X 0.402 0.012 10,2 0,3 120 110 Internal code Parts manufactured prior to Sept. 2007 were marked with only the dash number. 0.394 0.008 10,0 0,2 80 70 60 0.150 0.008 3,8 0,2 50 Recommended Land Pattern 40 20 10 0 25C 30 Isat Irms -40 -20 0 20 0.047 0.008 1,2 0,2 40 60 10 Frequency (MHz) Typical Current Derating Percent of rated current 1 0.1 Current (A) 80 Ambient temperature (C) 100 0.14 3,56 0.118 0.008 3,0 0,2 120 140 0.37 9,40 0.303 0.008 7,7 0,2 Dimensions are in 0.07 1,78 inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 378-2 Revised 08/01/11 (c) Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.