Continental Device India Limited An ISO/TS16949 and ISO 9001 Certified Company TO-220 Plastic Package 2N6121, 2N6122, 2N6123 2N6124, 2N6125, 2N6126 2N6121, 6122, 6123 2N6124, 6125, 6126 NPN PLASTIC POWER TRANSISTORS PNP PLASTIC POWER TRANSISTORS Medium Power Linear and Switching Applications PIN CONFIGURATION 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR 4 1 2 B C E DIM MIN . A B C D E F G H J K L M N O 14.42 9.63 3.56 A O 3 K All diminsions in mm. L N 1 2 O H F J D G M 3 MAX. 16.51 10.67 4.83 0.90 1.15 1.40 3.75 3.88 2.29 2.79 2.54 3.43 0.56 12.70 14.73 2.80 4.07 2.03 2.92 31.24 DEG 7 ABSOLUTE MAXIMUM RATINGS Collector-base voltage (open emitter) Collector-emitter voltage (open base) Collector current Total power dissipation up to TC = 25C Junction temperature Collector-emitter saturation voltage IC = 1.5 A; IB = 0.15 A D.C. current gain IC = 1.5 A; VCE = 2 V VCBO VCEO IC Ptot Tj 6121 6122 6123 6124 6125 6126 max. 45 60 80 max. 45 60 80 max. 4.0 max. 40 max. 150 V V A W C VCEsat max. 0.6 V hFE min. 25 max. 100 25 100 RATINGS (at TA=25C unless otherwise specified) Limiting values Collector-base voltage (open emitter) Collector-emitter voltage (open base) Emitter-base voltage (open collector) Continental Device India Limited VCBO VCEO VEBO Data Sheet 20 80 6121 6122 6123 6124 6125 6126 max. 45 60 80 max. 45 60 80 max. 5.0 V V V Page 1 of 3 2N6121, 2N6122, 2N6123 2N6124, 2N6125, 2N6126 Collector current IC Collector current (Peak) ICM Base current IB Total power dissipation up to TC = 25C Ptot Derate above 25C Junction temperature Tj Storage temperature Tstg THERMAL RESISTANCE From junction to case max. max. max. max. max. max. A A A W mW/C C C 3.12 C/W Rth j-c CHARACTERISTICS Tamb = 25C unless otherwise specified Collector cutoff current IB = 0; VCE = 45 V IB = 0; VCE = 60 V IB = 0; VCE = 80 V VEB(off) = 1.5 V; VCE = 45 VEB(off) = 1.5 V; VCE = 60 VEB(off) = 1.5 V; VCE = 85 VEB(off) = 1.5 V; VCE = 45 VEB(off) = 1.5 V; VCE = 60 VEB(off) = 1.5 V; VCE = 80 mA IE = 0; VCB = 45 V IE = 0; VCB = 60 V IE = 0; VCB = 80 V Emitter cut-off current IC = 0; VEB = 5 V Breakdown voltages IC = 100 mA; IB = 0 IC = 1 mA; IE = 0 IE = 1 mA; IC = 0 Saturation voltages IC = 1.5 A; IB = 0.15 A IC = 4 A; IB = 1.0 A Base-emitter on voltage IC = 1.5 A; VCE = 2 V D.C. current gain IC = 1.5 A; VCE = 2 V 4.0 7.0 1.0 40 320 150 -65 to +150 V V V V; V; V; 6121 6122 6123 6124 6125 6126 ICEO ICEO ICEO ICEX ICEX ICEX T C = 125C T C = 125C T C = 125C IC = 4 A; VCE = 2 V Small signal current IC = 0.1 A; VCE = 2 V; f = 1.0 KHz Transition frequency at f = 1 MHz IC = 1 A; VCE = 4 V max. 1.0 - max. - 1.0 max. - - max. 0.1 - max. - 0.1 max. - - ICEX max. 2.0 ICEX max. - ICEX max. - - - 1.0 - - 0.1 - 2.0 - ICBO ICBO ICBO max. 0.1 max. - max. - - 0.1 - - mA - mA 0.1 mA IEBO max. 1.0 mA VCEO(sus)* VCBO VEBO min. 45 min. 45 min. 60 60 5.0 VCEsat* VCEsat* max. max. 0.6 1.4 V V VBE(on)* max. 1.2 V hFE* min. 25 max. 100 25 100 20 80 hFE* min. 10 10 7.0 hfe min. 25 fT min. 2.5 80 80 mA mA mA mA mA mA - mA - mA 2.0 V V V MHz * Pulse test: pulse width 300 s; duty cycle 2%. Continental Device India Limited Data Sheet Page 2 of 3 Notes Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished on the CDIL Web Site/ CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 email@cdil.com www.cdilsemi.com Continental Device India Limited Data Sheet Page 3 of 3