©2004 Sensitron Semicondu ctor • 221 West Industry Court • Dee r Pa rk, N Y 11729-4681
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • sales@ sensitron .com
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATA SHEET 4653, REV. C
HERMETIC SCHOTTKY RECTIFIER
Low Forward Voltage Drop
Features:
• Soft Reverse Recovery at Low and High Temperature
• Low Forward Voltage Drop
• Low Power Loss, High Efficiency
• High Surge Capacity
• Guard Ring for Enhanced Durability and Long Term Reliability
• Guaranteed Reverse Avalanche Characteristics
Maximum Ratings
Characteristics Symbol Condition Max. Units
Peak Inverse Voltage per leg VRWM - 100 V
Max. Average Forward Current IF(AV) 50% duty cycle, rectangular
wave form
- Common Cathode / Anode
- Single / Doubler
15
7.5
A
A
Max. Peak One Cycle Non-
Repetitive Surge Current per leg IFSM 8.3 ms, half Sine wave 140 A
Non-Repetitive Avalanche Energy
per leg EAS TJ = 25 °C, IAS = 3.0 A,
L = 4.4 mH 20 mJ
Repetitive Avalanche Current per
leg IAR IAS decay linearly to 0 in 1
μ
s
ƒ limited by TJ max VA=1.5VR 3.0 A
Maximum Thermal Resistance RθJC - Common Cathode / Anode
- Single / Doubler 1.3
2.5
°C/W
Max. Junction Temperature TJ - -65 to +175 °C
Max. Storage Temperature Tstg - -65 to +175 °C
Electrical Characteristics
Characteristics Symbol Condition Max. Units
Max. Forward Voltage Drop VF1 @ 7.5A, Pulse, TJ = 25 °C 0.90 V
(per leg) VF2 @ 7.5A, Pulse, TJ = 125 °C 0.74 V
Max. Reverse Current IR1 @VR = 100V, Pulse,
TJ = 25 °C 0.05 mA
(per leg) IR2 @VR = 100V, Pulse,
TJ = 125 °C 0.5 mA
Max. Junction Capacitance
(per leg) CT @VR = 5V, TC = 25 °C
fSIG = 1MHz,
VSIG = 50mV (p-p)
250 pF
SHD120134
SHD120134P
SHD120134N
SHD120134D
©2004 Sensitron Semicondu ctor • 221 West Industry Court • Dee r Pa rk, N Y 11729-4681
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • sales@ sensitron .com
TECHNICAL DATA
DATA SHEET 4653, REV. C
Mechanical Dimensions: in Inches / mm
SINGLE COMMON CATHODE
1 2 3 1 2 3
COMMON ANODE DOUBLER
1 2 3 3 2 1
PINOUT TABLE
DEVICE TYPE PIN 1 PIN 2 PIN 3
SINGLE RECTIFIER CATHODE ANODE ANODE
DUAL RECTIFIER, COMMON CATHODE (P) ANODE 1 COMMON CATHODE ANODE 2
DUAL RECTIFIER, COMMON ANODE ( N) CATHODE 1 COMMON ANODE CATHODE 2
DUAL RECTIFIER, DOUBLER (D) ANODE ANODE/CATHODE CATHODE
Note: The Vf curves shown are for the SD90SC100 unpackaged die only.
SHD120134
SHD120134P
SHD120134N
SHD120134D
LCC-5
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Forward Voltage Drop - V F (V)
10-3
10-2
10-1
100
101
Instantaneous Forward Current - IF (A)
Typical Forward Characteristics
125 °C
200 °C
175 °C
25 °C
0 20 40 60 80 100 120
Reverse Voltage - VR (V)
10-5
10-4
10-3
10-2
10-1
100
101
Instantaneous Reverse Current - IR (mA)
Typical Reverse Characteristics
25 °C
50 °C
75 °C
100 °C
125 °C
150 °C
200°C
175 °C
0 20 40 60 80 100 120
Reverse Voltage - VR (V)
0
50
100
150
200
250
Junction Capacitance - CT (pF)
Typical Junction Capacitance
©2004 Sensitron Semicondu ctor • 221 West Industry Court • Dee r Pa rk, N Y 11729-4681
PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • sales@ sensitron .com
TECHNICAL DATA
DATA SHEET 4653, REV. C
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by u sing semiconductor devices that f eature assure d s afety or by me an s of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be li able for any failure in a semiconductor device or any secondary da mage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
SHD120134
SHD120134P
SHD120134N
SHD120134D
