https://www.phoenixcontact.com/us/products/2708067 FO converters - PSI-MOS-DNET CAN/FO 660/EM - 2708067 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) (R) FO converter with integrated optical diagnosis, for DeviceNetTM, CAN, CANopen to 800 kbps, extension/ redundancy module, interfaces: 1x FO (FSMA), 660 nm, for polymer/HCS fiber cable Product Features Data rates of up to 800 kbps, set via DIP switches Approved for use in zone 2 Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1 Integrated optical diagnostics for continuous monitoring of fiber optic paths High-quality electrical isolation between all interfaces (DeviceNet // fiber optic port // power supply // backplane) Integrated bus termination resistor can be connected internally Integrated backplane for routing through the supply voltage and data signals Connections can be plugged in using a COMBICON screw terminal block Floating switch contact in the basic module for leading alarm generation in relation to critical fiber optic paths Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 162.8 GRM Custom tariff number 85176200 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 22.5 mm 09/05/2014 Page 1 / 6 https://www.phoenixcontact.com/us/products/2708067 FO converters - PSI-MOS-DNET CAN/FO 660/EM - 2708067 Technical data Dimensions Height 99 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -20 C ... 60 C Ambient temperature (storage/transport) -40 C ... 85 C Permissible humidity (operation) 30 % ... 95 % (non-condensing) Altitude 5000 m (For restrictions see manufacturer's declaration) Degree of protection IP20 Noise immunity EN 61000-6-2:2005 Serial interface Interface 1 CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN, CANopen Connection method Pluggable screw connection File format/coding Bit stuffing, NRZ Transmission medium Copper Transmission length 5000 m (Dependent on the data rate and the protocol used) Serial transmission speed 800 kbps Optical interface FO Transmit capacity, minimum -6.2 dBm (980/1000 m) -16.9 dBm (200/230 m) Minimum receiver sensitivity -30.2 dBm Wavelength 660 nm Transmission length incl. 3 dB system reserve 100 m (With F-P 980/1000 230 dB/km with quick mounting connector) 800 m (With F-K 200/230 10 dB/km with quick mounting connector) Transmission medium Polymer fiber HCS fiber Connection method F-SMA Digital outputs Output name Relay output Output description Alarm output Number of outputs 1 Maximum switching voltage 60 V DC 42 V AC Limiting continuous current 0.46 A Power supply 09/05/2014 Page 2 / 6 https://www.phoenixcontact.com/us/products/2708067 FO converters - PSI-MOS-DNET CAN/FO 660/EM - 2708067 Technical data Power supply Supply voltage range 10 V DC ... 30 V DC Max. current consumption 100 mA Typical current consumption 100 mA (24 V DC) Connection method Pluggable COMBICON screw terminal block through basic module General Bit distortion, input 35 % (permitted) Bit distortion, output < 6.25 % Electrical isolation VCC // CAN Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Noise emission EN 55011 Housing material PA 6.6-FR Color green MTBF 456 Years (Telcordia standard, 25C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 89 Years (Telcordia standard, 40C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) Conformance CE-compliant ATEX II 3 G Ex nAC IIC T4 X (Please follow the special installation instructions in the documentation!) II (2) GD [Ex op is] IIC (PTB 06 ATEX 2042 U) (Please follow the special installation instructions in the documentation!) UL, USA / Canada Class I, Zone 2, AEx nc IIC T5 Class I, Div. 2, Groups A, B, C, D Classifications eCl@ss eCl@ss 4.0 27230207 eCl@ss 4.1 27230207 eCl@ss 5.0 27230207 eCl@ss 5.1 27230207 eCl@ss 6.0 27230207 eCl@ss 7.0 27230207 eCl@ss 8.0 27143136 ETIM ETIM 2.0 EC001423 09/05/2014 Page 3 / 6 https://www.phoenixcontact.com/us/products/2708067 FO converters - PSI-MOS-DNET CAN/FO 660/EM - 2708067 Classifications ETIM ETIM 3.0 EC001423 ETIM 4.0 EC001423 ETIM 5.0 EC001423 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 43201553 Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized Ex Approvals ATEX / UL Listed Approvals submitted Approval details UL Recognized cUL Recognized cULus Recognized 09/05/2014 Page 4 / 6 https://www.phoenixcontact.com/us/products/2708067 FO converters - PSI-MOS-DNET CAN/FO 660/EM - 2708067 Drawings Application drawing Application drawing FO FO BE B B BE B FO ...64x BE B Branch line / redundant branch line BE BE ...20 ...64x Linear structure Application drawing BE E E ...64x Application drawing BE E BE ...20 FO FO BE E BE E BE E FO B B B B BE BE BE B Star structure / redundant star structure B B B B B Tree structure Block diagram *) Only in the basic module 09/05/2014 Page 5 / 6 https://www.phoenixcontact.com/us/products/2708067 Phoenix Contact 2014 (c) - all rights reserved http://www.phoenixcontact.com 09/05/2014 Page 6 / 6