DDTD (xxxx) C NPN PRE-BIASED 500mA SOT-23 SURFACE MOUNT TRANSISTOR Features * * * * Epitaxial Planar Die Construction Complementary PNP Types Available (DDTB) Built-In Biasing Resistors, R1, R2 Lead Free/RoHS Compliant (Note 2) SOT-23 A TOP VIEW B C Mechanical Data * * Case: SOT-23 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminal Connections: See Diagram Terminals: Solderable per MIL-STD-202, Method 208 Lead Free Plating (Matte Tin Finish annealed over Alloy 42 leadframe). Marking and Date Code: See Table Below & Page 3 Ordering Information: See Page 3 Weight: 0.008 grams (approximate) * * * * * * * D E G H K M L J OUT 3 Dim Min Max A 0.37 0.51 B 1.20 1.40 C 2.30 2.50 D 0.89 1.03 E 0.45 0.60 G 1.78 2.05 H 2.80 3.00 J 0.013 0.10 K 0.903 1.10 L 0.45 0.61 M 0.085 0.110 0 8 All Dimensions in mm C P/N DDTD113EC DDTD123EC DDTD143EC DDTD114EC DDTD122JC DDTD113ZC DDTD123YC DDTD133HC DDTD123TC DDTD143TC DDTD114TC DDTD114GC R1 (NOM) 1K 2.2K 4.7K 10K 0.22K 1K 2.2K 3.3K 2.2K 4.7K 10K 0 Maximum Ratings R2 (NOM) 1K 2.2K 4.7K 10K 4.7K 10K 10K 10K OPEN OPEN OPEN 10K MARKING N60 N61 N62 N63 N64 N65 N66 N67 N69 N70 N71 N72 B R2 E 1 GND(0) IN Schematic and Pin Configuration Characteristic Input Voltage, (2) to (1) Symbol VCC DDTD113EC DDTD123EC DDTD143EC DDTD114EC DDTD122JC DDTD113ZC DDTD123YC DDTD133HC DDTD123TC DDTD143TC DDTD114TC DDTD114GC All Value 50 -10 to +10 -10 to +12 -10 to +30 -10 to +40 -5 to +5 -5 to +10 -5 to +12 -6 to +20 Unit V VEBO (MAX) 5 V IC Pd RJA 500 200 625 mA mW C/W Tj, TSTG -55 to +150 C VIN Output Current Power Dissipation Thermal Resistance, Junction to Ambient Air (Note 1) Operating and Storage and Temperature Range 1. 2. 2 @TA = 25C unless otherwise specified Supply Voltage, (3) to (2) Input Voltage, (1) to (2) Note: R1 V Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf. No purposefully added lead. DS30384 Rev. 8 - 2 1 of 3 www.diodes.com DDTD (XXXX) C (c) Diodes Incorporated Electrical Characteristics Characteristic Input Voltage Symbol DDTD113EC DDTD123EC DDTD143EC DDTD114EC DDTD122JC DDTD113ZC DDTD123YC DDTD133HC DDTD113EC DDTD123EC DDTD143EC DDTD114EC DDTD122JC DDTD113ZC DDTD123YC DDTD133HC Output Voltage Input Current DDTD113EC DDTD123EC DDTD143EC DDTD114EC DDTD122JC DDTD113ZC DDTD123YC DDTD133HC Output Current DC Current Gain R1, R2 Types @TA = 25C unless otherwise specified DDTD113EC DDTD123EC DDTD143EC DDTD114EC DDTD122JC DDTD113ZC DDTD123YC DDTD133HC Input Resistor Tolerance Resistance Ratio Tolerance Gain-Bandwidth Product* Vl(off) Min 0.5 0.5 0.5 0.5 0.5 0.3 0.3 0.3 Typ Max Unit V 3.0 3.0 3.0 3.0 3.0 2.0 2.0 2.0 Vl(on) VO(on) Il IO(off) R1 (R2/R1) 33 39 47 56 47 56 56 56 -30 -20 fT Gl V V Test Condition VCC = 5V, IO = 100A VO = 0.3V, IO = 20mA VO = 0.3V, IO = 20mA VO = 0.3V, IO = 20mA VO = 0.3V, IO = 10mA VO = 0.3V, IO = 30mA VO = 0.3V, IO = 20mA VO = 0.3V, IO = 20mA VO = 0.3V, IO = 20mA IO/Il = -50mA/-2.5mA mA VI = 5V 0.3V 7.2 3.8 1.8 0.88 28 7.2 3.6 2.4 0.5 A VCC = 50V, VI = 0V VO = 5V, IO = 50mA +30 +20 200 VCE = 10V, IE = 5mA, MHz f = 100MHz % % * Transistor - For Reference Only Electrical Characteristics Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage DDTD123TC DDTD143TC DDTD114TC DDTD114GC Collector Cutoff Current Emitter Cutoff Current DDTD123TC DDTD143TC DDTD114TC DDTD114GC Collector-Emitter Saturation Voltage DC Current Transfer Ratio Bias Resistor Tolerance Gain-Bandwidth Product* R1 Only, R2 Only Types @TA = 25C unless otherwise specified Symbol BVCBO BVCEO Min 50 40 Typ Max BVEBO 5 ICBO R1 or R2 300 100 100 100 56 -30 250 250 250 0.5 0.5 0.5 0.5 580 0.3 600 600 600 +30 fT 200 IEBO VCE(sat) DDTD123TC DDTD143TC DDTD114TC DDTD114GC hFE Unit Test Condition V IC = 50A V IC = 1mA IE = 50A IE = 50A V IE = 50A IE = 720A A VCB = 50V A VEB = 4V V IC = 50mA, IB = 2.5mA IC = 5mA, VCE = 5V VCE = 10V, IE = -5mA, MHz f = 100MHz % * Transistor - For Reference Only DS30384 Rev. 8 - 2 2 of 3 www.diodes.com DDTD (XXXX) C (c) Diodes Incorporated Ordering Information (Note 3) Packaging SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 SOT-23 Device DDTD113EC-7-F DDTD123EC-7-F DDTD143EC-7-F DDTD114EC-7-F DDTD122JC-7-F DDTD113ZC-7-F DDTD123YC-7-F DDTD133HC-7-F DDTD123TC-7-F DDTD143TC-7-F DDTD114TC-7-F DDTD114GC-7-F Notes: Shipping 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. YM Marking Information NXX Date Code Key Year Code Month Code 2002 N Jan 1 2003 P Feb 2 2004 R Mar 3 2005 S Apr 4 NXX = Product Type Marking Code, See Table on Page 1 YM = Date Code Marking Y = Year ex: T = 2002 M = Month ex: 9 = September 2006 T May 5 2007 U Jun 6 2008 V Jul 7 Aug 8 2009 W Sep 9 2010 X Oct O 2011 Y Nov N 2012 Z Dec D IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS30384 Rev. 8 - 2 3 of 3 www.diodes.com DDTD (XXXX) C (c) Diodes Incorporated