Microprocessor Reset Circuits
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 © 2005 Analog Devices, Inc. All rights reserved.
FEATURES
Reliable low cost voltage monitor with reset output
Suitable for monitoring 2.5 V, 3 V, 3.3 V, and 5 V power
supply voltages
Reset threshold levels: 4.62 V, 4.35 V, 3.06 V, 2.88 V, 2.55 V,
2.31 V, and 2.18 V typical
Active high and low push-pull output choices: ADM1810,
ADM1812, ADM1815, and ADM1817
Open-drain output choices: ADM1811, ADM1813, ADM1816,
and ADM1818
Can be used with a manual push-button to generate a reset:
ADM1813, ADM1818
Initialization of microprocessor systems with added safety
Available in 3-lead SOT-23 and SC70 packages
APPLICATIONS
Microprocessor systems
Computers
Controllers
Intelligent instruments
Automotive systems
GENERAL DESCRIPTION
The ADM181x range of voltage monitoring circuits is used in
any application where an electronic system needs to be reset
when a voltage increases above or below a predetermined value.
Because of the reset delay time incorporated into the ADM181x
series, these devices provide a safe startup for electronic systems.
Before a system initializes, the power supply must stabilize.
Using the ADM181x series ensures that there are typically 150 ms
for the power supply to stabilize before the system resets and
safe system initialization begins.
The ADM181x series of microprocessor reset circuits are
available in low cost, space-saving SOT-23 and SC70 packages.
FUNCTIONAL BLOCK DIAGRAMS
V
CC
V
CC
V
CC
V
CC
GND
GND
GND
RESET
MONITOR
5.5kΩ
GND
5.5kΩ
RST
ADM1810/ADM1815
ADM1811/ADM1816
ADM1812/ADM1817
ADM1813/ADM1818
V
CC
TOLERANCE
BIAS
TC
REFERENCE
V
CC
TOLERANCE
BIAS
TC
REFERENCE
V
CC
TOLERANCE
BIAS
TC
REFERENCE
V
CC
TOLERANCE
BIAS
TC
REFERENCE
150ms
DELAY
150ms
DELAY
150ms
DELAY
150ms
DELAY
RST
RST
RST
00064-001
Figure 1.
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 2 of 16
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagrams............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 4
ESD Caution.................................................................................. 4
Pin Configurations and Function Descriptions ........................... 5
Typical Performance Characteristics ..............................................6
Theory of Operation...........................................................................7
Timing Diagrams for All Devices ...............................................7
ADM1813 and ADM1818..............................................................7
ADM1810, ADM1812, ADM1815, and ADM1817 .....................7
ADM1811 and ADM1816..............................................................7
Outline Dimensions ..........................................................................8
Ordering Guide .............................................................................9
REVISION HISTORY
10/05—Rev. C to Rev. D
Updated Format.................................................................. Universal
Added Figure 3...................................................................................5
Changes to Table 3.............................................................................5
Updated Outline Dimensions..........................................................8
Changes to Ordering Guide .............................................................9
9/03REV. B to REV. C.
Added SC70......................................................................... Universal
Edits to SPECIFICATIONS..............................................................2
Edits to ORDERING GUIDE...........................................................4
Updated OUTLINE DIMENSIONS ...............................................7
2/03REV. A to REV. B.
Edits to FEATURES...........................................................................1
Deleted Table I ...................................................................................1
Edits to SPECIFICATIONS..............................................................2
Edits to ABSOLUTE MAXIMUM RATINGS ...............................3
Edits to ORDERING GUIDE ..........................................................3
Added Typical Performance Characteristics .................................4
Edits to ADM1813 AND ADM1818 section.................................5
Edits to ADM1810, ADM1812, ADM1815, AND
ADM1817 section..............................................................................5
Edits to ADM1811 AND ADM1816 section.................................5
Updated OUTLINE DIMENSIONS ...............................................6
3/02REV. 0 to REV. A.
Addition of Table ..............................................................................1
Edits to ORDERING GUIDE ..........................................................3
Addition of new text to ADM1813 and ADM1818 section.........4
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 3 of 16
SPECIFICATIONS
VCC = full operating range, TA = −40°C to +105°C, unless otherwise noted.
Table 1.
Parameter Min Typ Max Unit Conditions/Note
SUPPLY
Voltage 1 5.5 V TA = 0°C to 105°C
1.2 5.5 V TA = −40°C to +105°C
Current 9 16 μA VCC = 5.5 V, VCC > VTH, no load
4 10 μA VCC = 3.6 V, VCC > VTH, no load
OUTPUT CURRENT
RST Output Source Current 350 μA VCC ≥ VTH (max), reset not asserted (ADM1810/ADM1815)
RST Output Source Current 350 μA VCC ≤ VTH (min), reset asserted (ADM1812/ADM1817)
RST Output Sink Current 8 mA
VCC ≥ 2.7 V, reset asserted, VOUT = 0.4 V
(ADM1810/ADM1811/ADM1813/
ADM1815/ADM1816/ADM1818)
RST Output Sink Current 8 mA VCC ≥ 2.7 V, reset not asserted,
VOUT = 0.4 V (ADM1812/ADM1817)
OUTPUT VOLTAGE VCC − 0.5 VCC − 0.1 V (ADM1810/ADM1812/ADM1815/ADM1817)
@ 0 μA to 500 μA
VCC TRIP POINT
ADM1810-5, ADM1811-5, ADM1812-5,
ADM1813-5
4.50 4.62 4.75 V
ADM1810-10, ADM1811-10, ADM1812-10,
ADM1813-10
4.25 4.35 4.49 V
ADM1815-5, ADM1816-5, ADM1817-5,
ADM1818-5
2.98 3.06 3.15 V
ADM1815-10, ADM1816-10,
ADM1817-10, ADM1818-10
2.80 2.88 2.97 V
ADM1815-20, ADM1816-20,
ADM1817-20, ADM1818-20
2.47 2.55 2.64 V
ADM1815-R23, ADM1816-R23,
ADM1817-R23, ADM1818-R23
2.25 2.31 2.37 V
ADM1815-R22, ADM1816-R22,
ADM1817-R22, ADM1818-R22
2.12 2.18 2.25 V
INTERNAL PULL-UP RESISTOR
ADM1811/ADM1816 3.5 5.5 7.5
ADM1813/ADM1818 3.1 5.5 7.5
OUTPUT CAPACITANCE 10 pF
RESET ACTIVE TIME 100 150 250 ms
VCC DETECT TO RESET
Falling 10 μs (ADM1810/ADM1811/ADM1812/ADM1813)
10 μs (ADM1815/ADM1816/ADM1817/ADM1818)
Rising 100 150 250 ms tR = 5 μs
PUSH-BUTTON DETECT TO RST 1 μs (ADM1813/ADM1818)
PUSH-BUTTON RESET 100 150 250 ms (ADM1813/ADM1818)
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 4 of 16
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 2.
Parameter Rating
VCC −0.3 V to +6.0 V
Input Current 20 mA
Operating Temperature Range −40°C to +105°C
θJA Thermal Impedance, SOT-23 270°C/W
θJA Thermal Impedance, SC70 146°C/W
Lead Temperature (Soldering, 10 sec) 300°C
Vapor Phase (60 sec) 215°C
Infrared (15 sec) 220°C
Storage Temperature Range −65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those listed in the operational sections
of this specification is not implied. Exposure to absolute
maximum ratings for extended periods of time may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degrada-
tion or loss of functionality.
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 5 of 16
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
00064-002
ADM181x
TOP VIEW
(Not to Scale)
RST/RST
1
V
CC 2
GND
3
Figure 2. 3-Lead SOT Pin Configuration
00064-014
ADM181x
TOP VIEW
(Not to Scale)
1
V
CC
2
GND
3
RST/RST
Figure 3. 3-Lead SC70 Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
(SOT)
Pin No.
(SC70) Mnemonic Function
1 2 RST/RST Reset Output. RST/RST remains active while VCC is below the reset threshold
and remains active for 150 ms typical after VCC rises above the reset threshold.
2 1 VCC Supply Voltage Being Monitored.
3 3 GND 0 V Ground Reference for All Signals.
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 6 of 16
TYPICAL PERFORMANCE CHARACTERISTICS
10
0
2
4
6
8
–40 12010085705030200–20
00064-003
TEMPERATURE (°C)
ICC (μA)
ICC @VCC = 3V
ICC @VCC = 5.5V
Figure 4. Supply Current vs. Temperature
900
800
700
600
500
400
300
200
100
0
00064-004
TEMPERATURE (°C)
POWER-DOWN RESET DELAY (μs)
–40 12010085705030200–20
VOD = 20mV
VOD = 125mV
VOD = 200mV
Figure 5. Power-Down Reset Delay vs. Temperature
380
370
360
350
340
330
320
310
300
290
00064-005
TEMPERATURE (°C)
POWER-UP RESET TIMEOUT (ms)
–40 12010085705030200–20
Figure 6. Power-Up Reset Timeout vs. Temperature
1.011
0.995
0.997
0.999
1.001
1.003
1.005
1.007
1.009
–40 12010085705030200–20
00064-006
TEMPERATURE (°C)
NORMALIZED RESET THRESHOLD
DEVIATION (RISE)
DEVIATION (FALL)
Figure 7. Normalized Reset Threshold vs. Temperature
60
0
10
20
30
40
50
10 100080060040020010080604030
00064-007
V
TH
– V
CC
(mV)
MAXIMUM TRANSIENT (
μ
s)
Figure 8. Maximum Transient Duration Without Causing a Reset Pulse
vs. Reset Comparator Overdrive
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 7 of 16
THEORY OF OPERATION
TIMING DIAGRAMS FOR ALL DEVICES
The following two timing diagrams are valid for ADM1810,
ADM1811, ADM1812, ADM1813, ADM1815, ADM1816,
ADM1817, and ADM1818.
00064-008
V
CC
V
CC
TRIP POINT (MAX)
V
CC
TRIP POINT (MIN)
V
OL
V
CC
TRIP POINT
V
CC
TO RESET
DELAY
RST
Figure 9. Power-Down Timing Diagram
00064-009
VCC
VCC TRIP POINT (MAX)
RESET ACTIVE TIMEOUT
V
CC TRIP POINT (MIN) VCC TRIP POINT
RST
Figure 10. Power-Up Timing Diagram
ADM1813 AND ADM1818
The ADM1813 and ADM1818 are low cost voltage monitoring
devices featuring an open-drain output and optional push-button
reset function.
00064-010
ADM1813/
ADM1818
V
CC
GND
RST
V
CC
MICRO-
PROCESSOR
RESET
Figure 11. ADM1813/ADM1818 Typical Application
An optional push-button reset switch can be connected between
RST and ground. Pressing this switch pulls the reset output low. If
the push-button reset button pulls the RST output low for a period
greater than 1 μs when the reset button releases the RST line to
float high, then the RST line stays low for another 150 ms typical.
00064-011
VOLTAGE
INPUT HIGH
PUSH-BUTTON TIME RESET TIMEOUT
VOLTAGE
INPUT LOW
Figure 12. Push-Button Reset Timing Diagram
The ADM1818 range has 2.88 V and 2.55 V (typical) trip-point
options that allow the user to monitor 3.3 V and 3 V supplies.
For 5 V monitoring requirements, the ADM1813 range has 4.62 V
and 4.35 V (typical) trip-point options.
ADM1810, ADM1812, ADM1815, AND ADM1817
The ADM1812 is a 5 V supply monitor with an active high push-
pull output and trip-point options of 4.62 V and 4.35 V typical.
The ADM1810 is similar to the ADM1812, except that the
ADM1810 has an active low push-pull output stage. The ADM1817
is suitable for monitoring 3.3 V, 3 V, and 2.5 V supplies, with an
active high push-pull output and trip-point options of 3.06 V,
2.88 V, 2.55 V, 2.31 V, and 2.18 V typical. The ADM1815 is similar
to the ADM1817, except that the ADM1815 has an active low
push-pull output stage.
The ADM1810/ADM1812/ADM1815/ADM1817 can be
connected directly to most microprocessor reset inputs without
the need for external components.
00064-012
ADM1810/
ADM1812/
ADM1815/
ADM1817
V
CC
GND
RST/RST
V
CC
MICRO-
PROCESSOR
RESET
Figure 13. ADM1810/ADM1812/ADM1815/ADM1817 Typical Application
ADM1811 AND ADM1816
The ADM1811 is a 5 V supply monitor with an active low open-
drain output and trip-point options of 4.62 V and 4.35 V typical.
The ADM1816 also has an active low open-drain output but is
suitable for monitoring lower voltage supplies of 3.3 V, 3 V,
and 2.5 V.
00064-013
ADM1811/
ADM1816
VCC
GND
RST
VCC
MICRO-
PROCESSOR
RESET
Figure 14. ADM1811/ADM1816 Typical Application
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 8 of 16
OUTLINE DIMENSIONS
3.04
2.90
2.80
PIN 1
1.40
1.30
1.20 2.64
2.10
1.90 BSC
12
3
SEATING
PLANE
1.12
0.89
0.10
0.01
0.50
0.30
0.20
0.08
0.60
0.50
0.40
0.95 BSC
COMPLIANT TO JEDEC STANDARDS TO-236AB
Figure 15. 3-Lead Small Outline Transistor Package [SOT-23]
(RT-3)
Dimensions shown in millimeters
ALL DIMENSIONS COMPLIANT WITH EIAJ SC70
0.40
0.25
0.10 MAX
1.00
0.80
SEATING
PLANE
1.10
0.80
0.40
0.10
0.26
0.10
0.30
0.20
0.10
2
3
PIN 1 0.65 BSC
2.20
2.00
1.80
2.40
2.10
1.80
1.35
1.25
1.15
0.10 COPLANARITY
Figure 16. 3-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-3)
Dimensions shown in millimeters
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 9 of 16
ORDERING GUIDE
Model1Trip Point Package Option Brand
ADM1810-5AKS-REEL 4.62 V KS-3 (SC70) MZV
ADM1810-5AKS-REEL7 4.62 V KS-3 (SC70) MZV
ADM1810-5AKSZ-REEL24.62 V KS-3 (SC70) M4Y
ADM1810-5AKSZ-RL724.62 V KS-3 (SC70) M4Y
ADM1810-5ART-REEL 4.62 V RT-3 (SOT-23) MZV
ADM1810-5ART-REEL7 4.62 V RT-3 (SOT-23) MZV
ADM1810-5ARTZ-REEL24.62 V RT-3 (SOT-23) M4Y
ADM1810-5ARTZ-RL724.62 V RT-3 (SOT-23) M4Y
ADM1810-10AKS-REEL 4.35 V KS-3 (SC70) MZT
ADM1810-10AKS-REEL7 4.35 V KS-3 (SC70) MZT
ADM1810-10AKSZ-RL24.35 V KS-3 (SC70) M4Z
ADM1810-10AKSZ-RL724.35 V KS-3 (SC70) M4Z
ADM1810-10ART-REEL 4.35 V RT-3 (SOT-23) MZT
ADM1810-10ART-REEL7 4.35 V RT-3 (SOT-23) MZT
ADM1810-10ARTZ-RL24.35 V RT-3 (SOT-23) M4Z
ADM1810-10ARTZ-RL724.35 V RT-3 (SOT-23) M4Z
ADM1811-5AKS-REEL 4.62 V KS-3 (SC70) M1V
ADM1811-5AKS-RL7 4.62 V KS-3 (SC70) M1V
ADM1811-5AKSZ-REEL24.62 V KS-3 (SC70) M6Z
ADM1811-5AKSZ-RL724.62 V KS-3 (SC70) M6Z
ADM1811-5ART-REEL 4.62 V RT-3 (SOT-23) M1V
ADM1811-5ART-REEL7 4.62 V RT-3 (SOT-23) M1V
ADM1811-5ARTZ-REEL24.62 V RT-3 (SOT-23) M6Z
ADM1811-5ARTZ-RL724.62 V RT-3 (SOT-23) M6Z
ADM1811-10AKS-REEL 4.35 V KS-3 (SC70) M1T
ADM1811-10AKS-RL7 4.35 V KS-3 (SC70) M1T
ADM1811-10AKSZ-RL24.35 V KS-3 (SC70) M70
ADM1811-10AKSZ-RL724.35 V KS-3 (SC70) M70
ADM1811-10ART-REEL 4.35 V RT-3 (SOT-23) M1T
ADM1811-10ART-RL7 4.35 V RT-3 (SOT-23) M1T
ADM1811-10ARTZ-RL24.35 V RT-3 (SOT-23) M70
ADM1811-10ARTZ-RL724.35 V RT-3 (SOT-23) M70
ADM1812-5AKS-REEL 4.62 V KS-3 (SC70) MTV
ADM1812-5AKS-RL7 4.62 V KS-3 (SC70) MTV
ADM1812-5AKSZ-REEL24.62 V KS-3 (SC70) M72
ADM1812-5AKSZ-RL724.62 V KS-3 (SC70) M72
ADM1812-5ART-REEL 4.62 V RT-3 (SOT-23) MTV
ADM1812-5ART-REEL7 4.62 V RT-3 (SOT-23) MTV
ADM1812-5ARTZ-REEL24.62 V RT-3 (SOT-23) M72
ADM1812-5ARTZ-RL724.62 V RT-3 (SOT-23) M72
ADM1812-10AKS-REEL 4.35 V KS-3 (SC70) MTT
ADM1812-10AKS-RL7 4.35 V KS-3 (SC70) MTT
ADM1812-10AKSZ-RL24.35 V KS-3 (SC70) M71
ADM1812-10AKSZ-RL724.35 V KS-3 (SC70) M71
ADM1812-10ART-REEL 4.35 V RT-3 (SOT-23) MTT
ADM1812-10ART-RL7 4.35 V RT-3 (SOT-23) MTT
ADM1812-10ARTZ-RL24.35 V RT-3 (SOT-23) M71
ADM1812-10ARTZ-RL724.35 V RT-3 (SOT-23) M71
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 10 of 16
Model1Trip Point Package Option Brand
ADM1813-5AKS-REEL 4.62 V KS-3 (SC70) M3V
ADM1813-5AKS-RL7 4.62 V KS-3 (SC70) M3V
ADM1813-5AKSZ-REEL24.62 V KS-3 (SC70) M6X
ADM1813-5AKSZ-RL724.62 V KS-3 (SC70) M6X
ADM1813-5ART-RL 4.62 V RT-3 (SOT-23) M3V
ADM1813-5ART-RL7 4.62 V RT-3 (SOT-23) M3V
ADM1813-5ARTZ-RL24.62 V RT-3 (SOT-23) M6X
ADM1813-5ARTZ-RL724.62 V RT-3 (SOT-23) M6X
ADM1813-10AKS-REEL 4.35 V KS-3 (SC70) M3T
ADM1813-10AKS-RL7 4.35 V KS-3 (SC70) M3T
ADM1813-10AKSZ-RL24.35 V KS-3 (SC70) M6Y
ADM1813-10AKSZ-RL724.35 V KS-3 (SC70) M6Y
ADM1813-10ART-REEL 4.35 V RT-3 (SOT-23) M3T
ADM1813-10ART-RL7 4.35 V RT-3 (SOT-23) M3T
ADM1813-10ARTZ-RL24.35 V RT-3 (SOT-23) M6Y
ADM1813-10ARTZ-RL724.35 V RT-3 (SOT-23) M6Y
ADM1815-5AKS-REEL 3.06 V KS-3 (SC70) M5K
ADM1815-5AKS-RL7 3.06 V KS-3 (SC70) M5K
ADM1815-5AKSZ-REEL23.06 V KS-3 (SC70) M73
ADM1815-5AKSZ-RL723.06 V KS-3 (SC70) M73
ADM1815-5ART-REEL 3.06 V RT-3 (SOT-23) M5K
ADM1815-5ART-REEL7 3.06 V RT-3 (SOT-23) M5K
ADM1815-5ARTZ-REEL23.06 V RT-3 (SOT-23) M73
ADM1815-5ARTZ-RL723.06 V RT-3 (SOT-23) M73
ADM1815-10AKS-REEL 2.88 V KS-3 (SC70) M5E
ADM1815-10AKS-RL7 2.88 V KS-3 (SC70) M5E
ADM1815-10AKSZ-RL22.88 V KS-3 (SC70) M4F
ADM1815-10AKSZ-RL722.88 V KS-3 (SC70) M4F
ADM1815-10ART-REEL 2.88 V RT-3 (SOT-23) M5E
ADM1815-10ART-RL7 2.88 V RT-3 (SOT-23) M5E
ADM1815-10ARTZ-RL22.88 V RT-3 (SOT-23) M4F
ADM1815-10ARTZ-RL722.88 V RT-3 (SOT-23) M4F
ADM1815-20AKS-REEL 2.55 V KS-3 (SC70) M5A
ADM1815-20AKS-RL7 2.55 V KS-3 (SC70) M5A
ADM1815-20AKSZ-RL22.55 V KS-3 (SC70) M76
ADM1815-20AKSZ-RL722.55 V KS-3 (SC70) M76
ADM1815-20ART-RL 2.55 V RT-3 (SOT-23) M5A
ADM1815-20ART-RL7 2.55 V RT-3 (SOT-23) M5A
ADM1815-20ARTZ-RL22.55 V RT-3 (SOT-23) M76
ADM1815-20ARTZ-RL722.55 V RT-3 (SOT-23) M76
ADM1815-R22AKS-RL 2.18 V KS-3 (SC70) M5B
ADM1815-R22AKS-RL7 2.18 V KS-3 (SC70) M5B
ADM1815-R22AKSZ-RL22.18 V KS-3 (SC70) M74
ADM1815-R22AKSZ-R722.18 V KS-3 (SC70) M74
ADM1815-R22ART-RL 2.18 V RT-3 (SOT-23) M5B
ADM1815-R22ART-RL7 2.18 V RT-3 (SOT-23) M5B
ADM1815-R22ARTZ-RL22.18 V RT-3 (SOT-23) M74
ADM1815-R22ARTZ-R722.18 V RT-3 (SOT-23) M74
ADM1815-R23AKS-RL 2.31 V KS-3 (SC70) M5C
ADM1815-R23AKS-RL7 2.31 V KS-3 (SC70) M5C
ADM1815-R23AKSZ-RL22.31 V KS-3 (SC70) M75
ADM1815-R23AKSZ-R722.31 V KS-3 (SC70) M75
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 11 of 16
Model1Trip Point Package Option Brand
ADM1815-R23ART-RL 2.31 V RT-3 (SOT-23) M5C
ADM1815-R23ART-RL7 2.31 V RT-3 (SOT-23) M5C
ADM1815-R23ARTZ-RL22.31 V RT-3 (SOT-23) M75
ADM1815-R23ARTZ-R722.31 V RT-3 (SOT-23) M75
ADM1816-5AKS-REEL 3.06 V KS-3 (SC70) M6K
ADM1816-5AKS-REEL7 3.06 V KS-3 (SC70) M6K
ADM1816-5AKSZ-REEL23.06 V KS-3 (SC70) M77
ADM1816-5AKSZ-RL723.06 V KS-3 (SC70) M77
ADM1816-5ART-REEL 3.06 V RT-3 (SOT-23) M6K
ADM1816-5ART-REEL7 3.06 V RT-3 (SOT-23) M6K
ADM1816-5ARTZ-REEL23.06 V RT-3 (SOT-23) M77
ADM1816-5ARTZ-RL723.06 V RT-3 (SOT-23) M77
ADM1816-10AKS-REEL 2.88 V KS-3 (SC70) M6E
ADM1816-10AKS-RL7 2.88 V KS-3 (SC70) M6E
ADM1816-10AKSZ-RL22.88 V KS-3 (SC70) M54
ADM1816-10AKSZ-RL722.88 V KS-3 (SC70) M54
ADM1816-10ART-REEL 2.88 V RT-3 (SOT-23) M6E
ADM1816-10ART-RL7 2.88 V RT-3 (SOT-23) M6E
ADM1816-10ARTZ-RL22.88 V RT-3 (SOT-23) M54
ADM1816-10ARTZ-RL722.88 V RT-3 (SOT-23) M54
ADM1816-20AKS-REEL 2.55 V KS-3 (SC70) M6A
ADM1816-20AKS-RL7 2.55 V KS-3 (SC70) M6A
ADM1816-20AKSZ-RL22.55 V KS-3 (SC70) M6H
ADM1816-20AKSZ-RL722.55 V KS-3 (SC70) M6H
ADM1816-20ART-REEL 2.55 V RT-3 (SOT-23) M6A
ADM1816-20ART-RL7 2.55 V RT-3 (SOT-23) M6A
ADM1816-20ARTZ-RL22.55 V RT-3 (SOT-23) M6H
ADM1816-20ARTZ-RL722.55 V RT-3 (SOT-23) M6H
ADM1816-R22AKS-RL 2.18 V KS-3 (SC70) M6B
ADM1816-R22AKS-RL7 2.18 V KS-3 (SC70) M6B
ADM1816-R22AKSZ-RL22.18 V KS-3 (SC70) M78
ADM1816-R22AKSZ-R722.18 V KS-3 (SC70) M78
ADM1816-R22ART-RL 2.18 V RT-3 (SOT-23) M6B
ADM1816-R22ART-RL7 2.18 V RT-3 (SOT-23) M6B
ADM1816-R22ARTZ-RL22.18 V RT-3 (SOT-23) M78
ADM1816-R22ARTZ-R722.18 V RT-3 (SOT-23) M78
ADM1816-R23AKS-RL 2.31 V KS-3 (SC70) M6C
ADM1816-R23AKS-RL7 2.31 V KS-3 (SC70) M6C
ADM1816-R23AKSZ-RL22.31 V KS-3 (SC70) M79
ADM1816-R23AKSZ-R722.31 V KS-3 (SC70) M79
ADM1816-R23ART-RL 2.31 V RT-3 (SOT-23) M6C
ADM1816-R23ART-RL7 2.31 V RT-3 (SOT-23) M6C
ADM1816-R23ARTZ-RL22.31 V RT-3 (SOT-23) M79
ADM1816-R23ARTZ-R722.31 V RT-3 (SOT-23) M79
ADM1817-5AKS-REEL 3.06 V KS-3 (SC70) M7K
ADM1817-5AKS-REEL7 3.06 V KS-3 (SC70) M7K
ADM1817-5AKSZ-REEL23.06 V KS-3 (SC70) M7F
ADM1817-5AKSZ-RL723.06 V KS-3 (SC70) M7F
ADM1817-5ART-REEL 3.06 V RT-3 (SOT-23) M7K
ADM1817-5ART-REEL7 3.06 V RT-3 (SOT-23) M7K
ADM1817-5ARTZ-REEL23.06 V RT-3 (SOT-23) M7F
ADM1817-5ARTZ-RL723.06 V RT-3 (SOT-23) M7F
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 12 of 16
Model1Trip Point Package Option Brand
ADM1817-10AKS-REEL 2.88 V KS-3 (SC70) M7E
ADM1817-10AKS-RL7 2.88 V KS-3 (SC70) M7E
ADM1817-10AKSZ-RL22.88 V KS-3 (SC70) M7G
ADM1817-10AKSZ-RL722.88 V KS-3 (SC70) M7G
ADM1817-10ART-REEL 2.88 V RT-3 (SOT-23) M7E
ADM1817-10ART-R7 2.88 V RT-3 (SOT-23) M7E
ADM1817-10ARTZ-RL22.88 V RT-3 (SOT-23) M7G
ADM1817-10ARTZ-RL722.88 V RT-3 (SOT-23) M7G
ADM1817-20AKS-REEL 2.55 V KS-3 (SC70) M7A
ADM1817-20AKS-RL7 2.55 V KS-3 (SC70) M7A
ADM1817-20AKSZ-RL22.55 V KS-3 (SC70) M7H
ADM1817-20AKSZ-RL722.55 V KS-3 (SC70) M7H
ADM1817-20ART-REEL 2.55 V RT-3 (SOT-23) M7A
ADM1817-20ART-RL7 2.55 V RT-3 (SOT-23) M7A
ADM1817-20ARTZ-RL22.55 V RT-3 (SOT-23) M7H
ADM1817-20ARTZ-RL722.55 V RT-3 (SOT-23) M7H
ADM1817-R22AKS-RL 2.18 V KS-3 (SC70) M7B
ADM1817-R22AKS-RL7 2.18 V KS-3 (SC70) M7B
ADM1817-R22AKSZ-RL22.18 V KS-3 (SC70) M7J
ADM1817-R22AKSZ-R722.18 V KS-3 (SC70) M7J
ADM1817-R22ART-RL 2.18 V RT-3 (SOT-23) M7B
ADM1817-R22ART-RL7 2.18 V RT-3 (SOT-23) M7B
ADM1817-R22ARTZ-RL22.18 V RT-3 (SOT-23) M7J
ADM1817-R22ARTZ-R722.18 V RT-3 (SOT-23) M7J
ADM1817-R23AKS-RL 2.31 V KS-3 (SC70) M7C
ADM1817-R23AKS-RL7 2.31 V KS-3 (SC70) M7C
ADM1817-R23AKSZ-RL22.31 V KS-3 (SC70) M7L
ADM1817-R23AKSZ-R722.31 V KS-3 (SC70) M7L
ADM1817-R23ART-RL 2.31 V RT-3 (SOT-23) M7C
ADM1817-R23ART-RL7 2.31 V RT-3 (SOT-23) M7C
ADM1817-R23ARTZ-RL22.31 V RT-3 (SOT-23) M7L
ADM1817-R23ARTZ-R722.31 V RT-3 (SOT-23) M7L
ADM1818-5AKS-REEL 3.06 V KS-3 (SC70) M8K
ADM1818-5AKS-REEL7 3.06 V KS-3 (SC70) M8K
ADM1818-5AKSZ-REEL23.06 V KS-3 (SC70) M4T
ADM1818-5AKSZ-RL723.06 V KS-3 (SC70) M4T
ADM1818-5ART-REEL 3.06 V RT-3 (SOT-23) M8K
ADM1818-5ART-REEL7 3.06 V RT-3 (SOT-23) M8K
ADM1818-5ARTZ-REEL23.06 V RT-3 (SOT-23) M4T
ADM1818-5ARTZ-RL723.06 V RT-3 (SOT-23) M4T
ADM1818-10AKS-REEL 2.88 V KS-3 (SC70) M8E
ADM1818-10AKS-RL7 2.88 V KS-3 (SC70) M8E
ADM1818-10AKSZ-RL22.88 V KS-3 (SC70) M7P
ADM1818-10AKSZ-RL722.88 V KS-3 (SC70) M7P
ADM1818-10ART-REEL 2.88 V RT-3 (SOT-23) M8E
ADM1818-10ART-RL7 2.88 V RT-3 (SOT-23) M8E
ADM1818-10ARTZ-RL722.88 V RT-3 (SOT-23) M7P
ADM1818-20AKS-REEL 2.55 V KS-3 (SC70) M8A
ADM1818-20AKS-RL7 2.55 V KS-3 (SC70) M8A
ADM1818-20AKSZ-RL22.55 V KS-3 (SC70) M59
ADM1818-20AKSZ-RL722.55 V KS-3 (SC70) M59
ADM1818-20ART-REEL 2.55 V RT-3 (SOT-23) M8A
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 13 of 16
Model1Trip Point Package Option Brand
ADM1818-20ART-RL7 2.55 V RT-3 (SOT-23) M8A
ADM1818-20ARTZ-RL22.55 V RT-3 (SOT-23) M59
ADM1818-20ARTZ-RL722.55 V RT-3 (SOT-23) M59
ADM1818-R22AKS-RL 2.18 V KS-3 (SC70) M8B
ADM1818-R22AKS-RL7 2.18 V KS-3 (SC70) M8B
ADM1818-R22AKSZ-RL22.18 V KS-3 (SC70) M7M
ADM1818-R22AKSZ-R722.18 V KS-3 (SC70) M7M
ADM1818-R22ART-RL 2.18 V RT-3 (SOT-23) M8B
ADM1818-R22ART-RL7 2.18 V RT-3 (SOT-23) M8B
ADM1818-R23AKS-RL 2.31 V KS-3 (SC70) M8C
ADM1818-R23AKS-RL7 2.31 V KS-3 (SC70) M8C
ADM1818-R23AKSZ-RL22.31 V KS-3 (SC70) M7N
ADM1818-R23AKSZ-R722.31 V KS-3 (SC70) M7N
ADM1818-R23ART-RL 2.31 V RT-3 (SOT-23) M8C
ADM1818-R23ART-RL7 2.31 V RT-3 (SOT-23) M8C
1 Available only in reels.
2 Z = Pb-free part.
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 14 of 16
NOTES
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 15 of 16
NOTES
ADM1810-ADM1813/ADM1815-ADM1818
Rev. D | Page 16 of 16
NOTES
© 2005 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D00064-0-10/05(D)