E32-TC200E - OMRON - Datasheet.Directory

E32-series Fiber Units

Amplifier Units

OMRON's Fiber Sensors continue to support

an increasing range of applications.

This catalog brings you the latest information on our Fiber Units.

Fiber Sensors

Best Selection Catalog

E3X-DA-S/-MDA Series E3X-NA Series

Choose the model that suits the installation space from a

wide variety of shapes and sizes (7 shapes, in standard

or small sizes).

A Wide Variety of Shapes for

Adapting to Different Installation

Locations

Flexible, Pliable Fiber

That Can Be Handled Like Wire

First, Our Standard Lineup

These Fibers Units can be used in a variety of applications, such as detecting the presence of workpieces

and positioning.

Flat model

You will certainly appreciate the ease of use that flexible fiber ensures.

Flexible fiberConventional fiber

Detect Workpieces in Tight Spaces

Custom-produced Sleeves

Length Can Be Specified in 1-m Units

Saving Energy and Work

Space Savings and Simple Mounting

Flat Models

Models with sleeves

Screw-shaped Cylindrical Flat Equipped with sleeve

Standard Models

Detection with Increased

Reliability

Special-beam Models

Fiber Units for the Food-packaging,

Semiconductor, and FPD Industries

High Resistance to External

Conditions with Fiber

Environment-

resistive Models

Application-

specific Models

Flat models that allow simple

screw mounting and

straightforward wiring have

been added to the lineup. Using

these models eliminates the

problem of fibers getting caught

on surrounding objects.

Models with sleeves allow

detection in tight spaces. We

will perform the time-consuming

task of fashioning the sleeve,

with a length and bends to suit

the space (except for ultrafine

sleeves).

We have developed a broad range of fibers to meet a wide

variety of needs. Multicore (flexible) fiber is a new type of

standard fiber that can be used like wire without worrying

about the bending radius. We have also produced fiber that

will not break when used in moving parts and fiber that is

not degraded by contact with oil.

We will produce fiber of the required length (in meter

units). For large-scale installations, specifications of up

to 20 m can be handled. (Specifications of 0.3 m and

0.5 m are also possible.)

First, Our Standard Lineup

Label-detection models

E32-G14 Alignment-check models

E32-L16 Liquid-level detection models

E32-D36T

Heat-resistant models Chemical-resistant models

Small-spot models

E32-C42+

E39-F3A

Area-sensing models

E32-T16J Limited-reflective

models

E32-L24L

High-power models

E32-T17L

Standard Models

Detection with Increased

Reliability

A variety of heads incorporating the latest optical technology makes it possible to solve common problems

related to detection and to increase reliability.

Special-beam Models

P10

Fiber Units for the Food-packaging,

Semiconductor, and FPD Industries

These models, which were developed for specific applications, offer top-quality detection performance.

P16

High Resistance to External

Conditions with Fiber

We have developed model variations for adapting to a variety of environmental conditions.

These models enable detection in high-temperature environments and vacuums.

Environment-

resistive Models

P14

■ Resistant to dust and dirt

■ Capable of detecting small

workpieces

■ Resistant to workpiece vibration

Use these models to handle

unstable detection conditions.

■ Label detection

■ Liquid-level detection

■ Alignment and mapping of

glass substrates

■ Wafer mapping

Use these models for

specific applications.

■ High-temperature environments

■ Environments subject to the

splattering of chemicals

■ Vacuums

Use these models to handle

applications in special

environments.

Application-

specific Models

Selection Guide

Fiber Units

Amplifier Units

Detection

conditions

Environmental

conditions Standard environments Special envir onments

■ High-temperature envi ron-

ments (up to 400ºC)

■ Environments subject to scat-

tering of chemicals and oil

■ Vacuum environments

Standard

detection

■ Workpiece presence

■ Positioning

■ Level differences and marks

Standard Models P.6 Environm ent-resistive Models P.14

Special-

beam

■ Long-distance sensi ng, resistance to

dust and dirt

■ Small beam, resistance to rattling

■ Detection of transparent objects

Special-beam Models P.10

Application-

specific

■ Labels

■ Liquid level

■ Alignment and mapping of glass sub-

strates

■ Wafer mapping

Application-specific Models P.16

Type Digital Manual

Appearance

Response

time 48 µs, 1 ms, or 4 ms

(2- output models: 80 µs, 1 ms, or 4 ms) 100 µs, 1 ms , or 4 m s 200 µs

(high-s peed models: 20 µs )

Light source Red, green, blue, or infrared LED Red or green LED

Function

Dual disp la y ( in cl uding digital, bar, percent, and hold di splay functions)

Threshold adjustment per fo rm e d manually or by teac hi ng

OFF-de lay, O N -d elay, one-shot timer (adju st able from 1 ms to 5 s)

LED bar display (5 levels)

8-turn sensitivity adjust er

OFF delay timer (fixed at 40 ms)

Advanced-function mod els are

availabl e (2 -o ut put / i npu t models). Wate r- re si st ant models are avai l able.

Models E3X-DA@-S

E3X-DA@TW-S (2-output model )

E3X-DA@RM-S (input model)

E3X-MDA@E3X-NA@

E3X-NA@F (hig h-speed model)

E3X-NA@V (water-r esis t ant model)

Fiber Units

Amplifier Units

Workpiece

resence Positioning Level

differences Marks Workpiece

resence Positioning Level

difference

High power Small spot Area sensing Retroreflective

sensing

Labels Liquid level Alignment Mapping

2-channel

models

We have developed

model variations for

handling a broad

range of applications.

CONTENTS

■ Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P4

■ Overview of Features, Applications, and Variations

Standard Models Flexible (New Standard) . . . . . . . . . . . . . . . . . . P6

Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P6

Break-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . . P6

Fluorine Coating . . . . . . . . . . . . . . . . . . . . . . . . . . P7

Special-beam Models Long Distance, High Power . . . . . . . . . . . . . . P10

Ultracompact, Ultrafine Sleeve . . . . . . . . . . . . . . P10

Coaxial, Small Spot. . . . . . . . . . . . . . . . . . . . . . . P11

Fine Beam (Narrow Vision Field) . . . . . . . . . . . . P12

Area Sensing. . . . . . . . . . . . . . . . . . . . . . . . . . . . P12

Retroreflective. . . . . . . . . . . . . . . . . . . . . . . . . . . P13

Limited-reflective. . . . . . . . . . . . . . . . . . . . . . . . . P13

Environment-resistive Models Heat-resistant . . . . . . . . . . . . . . . . . . . . . . . . . . P14

Chemical-resistant . . . . . . . . . . . . . . . . . . . . . . . . P14

Vacuum-resistant . . . . . . . . . . . . . . . . . . . . . . . . P15

Application-specific Models Label Detection. . . . . . . . . . . . . . . . . . . . . . . . . P16

Liquid-level Detection . . . . . . . . . . . . . . . . . . . . . P16

Glass-substrate Alignment . . . . . . . . . . . . . . . . . P17

Glass-substrate Mapping . . . . . . . . . . . . . . . . . . P17

Water Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . P18

■ Ordering Information

Through-beam Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P19

Fiber Units with Reflective Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P25

Application-specific Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P30

■ Ratings/Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P34

■ Dimensions

Through-beam Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P36

Fiber Units with Reflective Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P42

Application-specific Fiber Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P47

■ Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P51

Features/Applications

■ Feature: Multicore (Flexible) F ibers

A large number of ultrafine cores are all surrounded by

claddin g. As a result, the fiber is fl exible and can b e bent

without significantly reducing the light intensity. This

helps s olve probl ems, suc h as fibe r being brok en by get-

ting caught on other objects.

■ Ratings/Ch arac teris ti cs

■ Feature: Flat Models

Flat models, which allow simple attachment and wiring,

have bee n added to the lineup . Choose the model to suit

the installation space from 3 sensing directions and 2

siz es, standard and small.

■ Ratings/Ch arac teris ti cs

*Depends on the fiber diameter.

■ Featur e: Bundle Fibers

The Fiber Units contain a large number of independent

fine fibers, ensuring a high degree of flexibility.

■ Ratings/Ch arac teris ti cs

Standard Models

Flexible (New Standard) R

Fewer problems Light intensity affected by bends in fiber

Fiber broken by getting caught on sur-

rounding objects

•

Perform wirin g without worrying about the bending radi us.

• Choose the model to suit the installation space from

a variety of shapes.

Flexible fiber Conventional fiber Cladding

Cores

Min. sensing

object 0.005-mm dia.

Min. bending

radius 1 mm

Ambient tem-

perature −40°C to 70°C (no icing or condensation)

Fiber material Plastic

Standard

Equipped with sleeveCylindricalScrew-shaped Flat

• Choose the model to suit the installation space

from a variety of shapes.

• New flat models allow space savings and simple

installation.

Min. sensing

object 0.005-mm dia.

Min. bending

radius 10 or 25 mm*

Ambient tem-

perature −40°C to 70°C (no icing or condensation)

Fiber material Plastic

Break-resistant B

• Bundle-

iber mode ls can b e used

or moving p arts.

• Capable of withstanding at least one million re-

peated bends (in typical applications).

Min. sensing

object 0.005-mm dia.

Min. bending

radius 4 mm (withstands repeated bending)

Ambient tem-

perature −40°C to 70°C (no icing or condensation)

Fiber material Plastic

ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì

■ Feature: Fluorine Coating

Fluororesin is used as the sheath material to prevent fi-

ber degradation resulting from oil adhesion.

Note: The tip of the head is not chemical-resistant.

■ Ratings/Ch arac teris ti cs

This c ustomiz ation/deli very serv ice appl ies to stan dard mode ls. It is

aimed at reducing industrial waste and simplifying the installation

procedure.

■ Fiber Lengt h vs. Sensing Distance

Through-beam Fiber Units

(Fiber length of 2 m corresponds to

100%.)

Fiber Units with Reflective Sensors

(Fiber length of 2 m corresponds to

100%.)

■ Model Number Used When Changing Only the Sleeve Length

■ Model Number Used When Changing the Sleeve Lengt h and Bends

Standard Models

Fluorine Coating U

• Fiber degradation due to oil is prevented using a fluo-

roresin co atin g.

• Free cutting is poss ib le with cu tter prov id ed.

Oil is blocked!

(Cross section)

Fluororesin coatin

Min. sensing

object 0.005-mm dia.

Min. bending

radius 4 mm

Ambient tem-

perature −40°C to 70°C (with no icing or condensation)

Fiber material Plastic

Fiber Customization Service (Fiber Length, Sleeve

Length, and Bends)

Fiber Length

■Applicable Models

Standard mo dels

■Model Number Us ed for Ordering

Standard model number + Fiber length

Fiber length: 0.3 m, 0.5 m, or any length from

1 to 20 m (in 1-m units)

Sleeve Length and Bends

■Applicable Models

E32-TC200B/E32-TC200F

E32-DC200B/E32-DC200F

The E32-DC200B cannot be bent.

100

20 5 10 15 20

Fiber length (m)

100

20 5 10 15 20

Fiber length (m)

Sensing distance (%)

Model: E32- *1C200*2 -S*3

Model Numbers Incorporating the Bending Radius, R, and Dimensions L1 and L2

Specifying L1 Only

R7.5

R10

R12.5

Model numberL1 (±1)

12.5

17.5

22.5

E32- *1 C200 *2 -S *3 A1

E32- *1 C200 *2 -S *3 A2

E32- *1 C200 *2 -S *3 B1

E32- *1 C200 *2 -S *3 B2

E32- *1 C200 *2 -S *3 C1

E32- *1 C200 *2 -S *3 C2

E32- *1 C200 *2 -S *3 D1

E32- *1 C200 *2 -S *3 D2

(Units: mm) (Units: mm)

Specifying L2 Only

R7.5

R10

R12.5

Bending

radius

Bending

radius L2 (±1)

7.5

17.5

12.5

22.5

E32- *1 C200 *2 -S *3 A3

E32- *1 C200 *2 -S *3 A4

E32- *1 C200 *2 -S *3 B3

E32- *1 C200 *2 -S *3 B4

E32- *1 C200 *2 -S *3 C3

E32- *1 C200 *2 -S *3 C4

E32- *1 C200 *2 -S *3 D3

E32- *1 C200 *2 -S *3 D4

*1: Insert "T" for Through-beam Fiber Units and "D" for Fiber Units with Reflective Sensors

*2: Insert the "B" or "F" that appears at the end of the original model number.

*3: Insert "50" if the total length is 50 mm. The total length must not exceed 120 mm.

L1 L2 R

Total length Total length

Model number

Features/Applications

Overview of Model Variations

Note 1. The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

2. These symbols are defined as follows. : Flexibl e fiber, : Bendable fiber, : Fluorine-coated fiber.

Type

(See note 2.) Flexible (New Standard) Standa rd Break- r esi stant Fluor ine coating

Shape of head Flexible and pliable Withstands repeated

bending Cable protected against

oil

Screw-shaped

(top-view) M4 530 760 680 680

E32-T11R E32-TC200 E32-T11 E32-T11U

M3 130 220 200

E32-T21R E32-TC200E E32-T21

(with sleeve) M4

(1.2-dia.

sleeve)

530 760

E32-TC200BR E32-TC200B

(0.9-dia.

sleeve)

130 220

E32-TC200FR E32-TC200F

Cylindrical

(top-view) 3 dia. 530 760 680

E32-T12R E32-T12 E32-T12B

1.5 dia. 130 220 200

E32-T22R E32-T222 E32-T22B

(side-view) 3 dia. 210 460

E32-T14LR E32-T14L

1 dia. 50 130

E32-T24R E32-T24

Flat

(top-view) 15 × 8 × 3 530 760 680

E32-T15XR E32-T15X E32-T15XB

12 × 7 × 2 130 220 150

E32-T25XR E32-T25X E32-T25XB

(side-view) 15 × 8 × 3210460

E32-T15YR E32-T15Y

12 × 7 × 250130

E32-T25YR E32-T25Y

(flat-view) 15 × 8 × 3210460

E32-T15ZR E32-T15Z

12 × 7 × 250130

E32-T25ZR E32-T25Z

Standard Models Sensing distance (mm)

(See note 1.)

Model

Through-beam Fiber Units

(Cross section)

Fluororesin coatin

RBU

ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì

Overview of Model Variations

Note 1. The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

2. These symbols are defined as follows. : Flexible fiber, : Bendable fiber, : Fluorine-coated fiber.

Type

(See note 2.) Flexible (New Standard) Standa rd Break- re si st an t Fluor ine coating

Shape of head Flexible and pliable Withstands repea te d

bending Cable protected against

oil

Screw-shaped

(top-view) M6 170 300 170 170

E32-D11R E32-DC200 E32-D11 E32-D11U

M3 30 80 30

E32-D21R E32-DC200E E32-D21

(with sleeve) M6

(2.5-dia.

sleeve)

170 300

E32-DC200BR E32-DC200B

(1.2-dia.

sleeve)

30 80

E32-DC200FR E32-DC200F

Cylindrical

(top-view) 3 dia. 170 230 70

E32-D12R E32-D12 E32-D221B

3 dia.

(1.5 dia.) 30 80 30

E32-D22R E32-D22 E32-D22B

(side-view) 6 dia. 45 1 10

E32-D14LR E32-D14L

2 dia. 15 30

E32-D24R E32-D24

Flat

(top-view) 15 × 10 × 3 170 300 170

E32-D15XR E32-D15X E32-D15XB

12 × 7 × 2308050

E32-D25X E32-D25X E32-D25XB

(side-view) 15 × 10 × 3 40 100

E32-D15YR E32-D15Y

12 × 8 × 2820

E32-D25YR E32-D25Y

(flat-view) 15 × 10 × 3 40 100

E32-D15ZR E32-D15Z

12 × 8 × 2820

E32-D25ZR E32-D25Z

Standard Models

Fiber Units with Reflective Sensors

RB(Cross section)

Fluororesin coatin

RBU

Sensing dista nce (mm )

(See note 1)

Model

Features/Applications

■ Overview of Model Variations

*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

■ Applications

■ Ratings/Ch arac teris ti cs

Type Features Shape, sensing distance (mm)* Model number

Equipped with larg e l ens 20,000 E32-T17L

Side-view, screw mounting 3,400 E32-T14

M4 screw 1,330 E32-T11L

Equipped with larg e l ens 700 E32-D16

M6 screw 400 E32-D11L

■ Applications

■ Ratings/Ch arac teris ti cs

Type Features Shape, sensing distance (mm)* Model number

1-dia. cylinder 130 E32-T223R

0.5-dia. sl eev e (0.25-dia. opening) 44 E32-T33-S5

0.22-dia. sl eeve (0.1-dia. opening) 5E32-T334-S5

0.8-dia. sleeve 16 E32-D33

0.5-dia. sleeve 3E32-D331

Special-beam Models

Long Distance, High Power

• Powerful beam reduces influence of dust and dirt.

• Long sensing distance enables use in large-scale

installations.

E32-T14

E32-T11L E32-T17L

Detecting parts inside (t rans-

lucent) containers Detecting workpieces in

coating processes

Ambient tem-

perature −40°C to 70°C (no icing or condensation)

Fiber material Plastic

Through-beam

Refle-

ctive

Ultracompact, Ultrafine Sleeve

E32-T223R

E32-T334-S5

E32-D33

1 dia.

0.5 dia.

0.22

dia.

3 dia.

• Ultracompact head can be installed in tight spaces.

• Ultrafine sleeve ensures reliable detection of small

object s, such as electroni c com po nen ts.

E32-D33 E32-T33-S5

Alignment

inspections Detection of terminals

Min. sensing

object 0.005-mm dia.

Ambient tem-

perature −40°C to 70°C (no icing or condensation)

Material Plastic

Through-beam

Refle-

ctive

ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì

■ Overview of Model Variations

*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

■ Applications

■ Ratings/Ch arac teris ti cs

Type Features Shape, sensing distance (mm)* Model number

Co a xial, M6 screw 300 E32-CC200

Coax ia l, 3-di a. cylinder 150 E32-D32L

Small spot 0.1-dia . spot at a di stance of 7 mm E32-C41+

E39-F3A-5

Smal l v ariable spot

Spot diameter variable in the range

0.1 to 0.6 mm at distances in the

range 6 to 15 mm

E32-C42+

E39-F3A

Long dist ance, small spo t 0.5-d i a. spot at 17 m m E32-C31+

E39-F3B

Long di st ance, parallel light Spot di am eter of 4 mm max. at

distances in the range 0 to 20 mm E32-C31+

E39-F3C

Special-beam Models

Coaxial, Small Spot

• Small spot diameter (0.1 mm min. in diameter) enables

the reli able de tecti on of smal l workpi eces.

• Use of red light ensures easy visual recognition and

simple positioning.

E32-C42+

E39-F3A

Detecting of CDs

E32-C31+

E39-F3C

Min. sensing

object 0.005-mm dia.

Ambient tem-

perature −40°C to 70°C (no icing or condensation)

Fiber material Plastic

Coaxial, reflective

E32-C41+

E39-F3A-5

0.1 mm dia. spot

Variable from

0.1 to 0.6 dia.

E32-C42+

E39-F3A

0.5 mm dia.

E32-C31+

E39-F3B

E32-C31+

E39-F3C

4 mm dia.

11 mm

Features/Applications

■ Overview of Model Variations

*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

■ Applications

■ Ratings/Ch arac teris ti cs

Type Features Shape, sensing distance (mm)* Mode l nu m ber

Top vie w 1,900 E32-T22S

Side view 1,300 E32-T24S

■ Applications

■ Ratings/Characteristics

Type Features Shape, sensing distance (mm)* Model num ber

Sens ing w idt h: 11 mm 840 E32-T1 6PR

Sens ing w i dt h: 11 mm

Flat-view 750 E32-T16JR

Sens ing w idt h: 30 mm 1,300 E32-T16WR

Beam w idt h: 11 mm 150 E32-D36P1

Special-beam Models

Fine Beam (Narrow Vision Field)

Approx.

60°Approx. 6°

1300 mm

• Fine be am red uc es unwa nte d light in surrou nding are a.

• Powerful bea m a llows use i n ap pli ca t io ns requ iring a

long sensing distance.

E32-T24S

E32-T22S

Alignment inspection

of orientation flats

Min. bending

radius 10 mm

Ambient tem-

perature −40°C to 70°C (no icing or condensation)

Fiber material Plastic

Through-beam

Area Sensing

30 mm

11 mm

•T

hese Fiber Units ensure greater reliability with the de-

tection of position inconsistencies in passing workpiec-

es and the presence of workpieces with holes.

• Wide sensing bands of 11 and 30 mm (through-beam

models) enable the detection of large position incon-

sistencies.

E32-T16WR E32-D36P1

E32-T16WR E32-T16PR

Detecting passage of

candies Detecting chips on

ilm

Ambient tem-

perature −40°C to 70°C (no icing or condensation)

E32-T16W@ only: −25°C to 55°C

Fiber material Plastic

Through-beam

Refle-

ctive

ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì

■ Overview of Model Variations

*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

■ Applications

■ Ratings/Ch arac teris ti cs

Type Features Shape, sensing dist ance (mm)* Model number

MSR funct i on, M6 screw 250 E32-R21

MSR fu nct i on, screw mounting, long

distance 1,500 E32-R16

■ Applications

■ Ratings/Ch arac teris ti cs

Type Features Shape, sensing dist ance (mm)* Mode l numb er

Ultracompact, flat -v ie w

Ideal for checking stocks of glass sub-

strates 0 to 4 E32- L24S

Heat - resi stant up to 10 5°C,

top-view 5.4 to 9

(center: 7.2) E32-L25L

Wide se nsing r ange ,

flat-view 0 to 15 E32-L16

Heat - resi stant up to 20 0°C,

flat-view 4 t o 10 E32-L86

Special-beam Models

Retroreflective

• The return optical path ensures that more light is in-

terrupted by transparent workpieces than with

through-beam models.

• Equipped with MSR function to eliminate light reflect-

E32-R16

E32-R21

Detecting

translucent

medicine

Ambient tem-

perature

E32-R21: −40°C to 70°C

E32-R16: −25°C to 55°C

(with no icing or condensation)

Fiber material Plastic

Retrore-

flective

Limited-reflective

Detection range

Non-detection range

• Limited-reflective models eliminate light reflected

from distant objects.

• Small level differences can be reliably detected.

• The opti cal -ax is direction can be se lec ted acco rdin g

to the installation space.

E32-L24L

E32-L25L E32-L24L

Detecti ng co nne ctor

pins Detecting wafers

(glass substrates)

Min. sensing

object 0.005-mm dia.

Fiber material Plastic

200°C models only: Glass

Limited-reflective

Features/Applications

■ Overview of Model Variations

*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

■ Applications

■ Ratings/Ch arac teris ti cs

Type Amb ient tem -

perature Features Shape, sensing distance (mm)* Mode l nu m ber

−40°C to 150°C M4 screw 760 E32-T51

−40°C to 200°C L- shaped, long distance 1,300 E32-T84S-S

−60°C to 350°C M4 screw 450 E32-T61-S

−60°C to 350°C M6 screw 90 E32-D 61-S

−40°C to 400°C M6 screw, with sl eev e 60 E32-D 73-S

■ Applications

■ Ratings/Ch arac teris ti cs

Type Features Shape, sensing distance (mm)* Model numbe r

Water-res is t ant ro und head 2,000 E32-T11 F

Built-in lens, high power 3,000 E32-T12F

Heat-resistant up to 200°C 700 E32-T81F-S

Built-in lens, high power 95 E32-D12F

Environment-resistive Models

Heat-resistant

• These Fiber Units can be used for various applica-

tions in temperatures up to 400°C.

E32-T84S-S

E32-T61-S

Detecting wafers in

high-temperature en-

vironments

150°C models 200°C and high er mod el s

E32-T81R

E32-D81R

All other models

Min. bending

radius 35 mm 10 mm 25 mm

Fiber material Plastic

(fluororesin coating) Glass (fluo-

roresin coating) Glass (SUS spi-

ral coating)

hrough-beam

Refle-

ctive

Chemical-resistant

• Built-in lens and high-power beam reduce the influ-

ence of dirt and drops of water.

• Round design prevents drops of water sticking to the

head (E32-T11F).

E32-T14F

Detecting workpieces in cleaning processes

E32-T12F

All other models E32-T51F E32-T81F-S

Ambient tem-

perature −40°C to 70°C−40°C to 150°C−40°C to 200°C

Fiber material Plastic

(fluor or esin coat i ng) Glass (fluororesin

coating)

Through-beam

Refle-

ctive

ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì

■ Overview of Model Variations

*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

Fiber Units on Atmospheric-pressure Side

Flanges

■ Ratings /Characteris tics

■ Applications (Configuration Example)

■ Ratings/Ch arac teris ti cs

Type Features Shape, sensing distance (mm)* Model number

M4 screw, top-view, heat- resi stant up

to 120°C, long distance 1,000 E32-T51V+

E39-F1V

L-shaped, heat-resis ta nt up to 120°C130 E32-T54V

L-shape d, lo ng distance, heat- re sis-

tant up to 20 0°C480 E32-T84SV

Appearance Type Model number

Commo n E32-T10V 2M

Appearance Type Model number

4-chan nel f la nge E32-VF4

1-chan nel f la nge E32-VF1

Number of

channels 4 channels 1 channel s

Item Model number E32-VF4 E32-VF1

Leakage rate 1×10-10 Pa ·m3/s max.

Ambient tem perature Operating: −25°C to 55°C

Storage: −25°C to 55°C

Material Aluminum (A5056) Stainless steel (SUS304)

Alum inum (A5056)

Flange-seal material

Fluorocar bon rubber (Viton)

Weight (packed state) Appr ox. 280 g Approx. 240 g

Environment-resistive Models

Vacuum-resistant

• These models can be used in high-vacuum environ-

ments at pr es su res from 10-5 to 0.1 Pa.

• The 4-channel multi-flange, which has a maximum

leakag e rate of 1×10-10 Pa·m3/s, co ntributes to spac e

savings.

Fiber Unit on vacuum side (set of 2)

E32-T51V

E32-T54V

E32-T84SV

Flange

E32-VF4 (4 CH)

E32-VF1 (1 CH)

Lens Unit

E39-F1V

Vacuum chamber Atmospheric-pressure side

Fiber Units on atmospheric-

pressure side (set of 2)

E32-T10V

Amplifier Unit

E3X-DA-S

E3X-NA

Vacuum side

120°C models 200°C mod-

els Atmospheric-

pressure side

Min. bend-

ing radius 30 mm 25 mm

Fiber mate-

rial Glass (fluorores-

in coating) Glass (SUS

spiral coating) Plastic

Through-beam

Features/Application

■ Overview of Model Variations

*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

■ Applications

■ Ratings/Ch arac teris ti cs

Type Features Shape, sensing distance (mm)* Model number

Slot sensor, no adjustment of optical axis

required 10 E32-G14

Screw mounting, side-view 3,400 E32-T14

■ Operating Principle

The presence/absence of liquid is detected using the

refractive propertie s of light. More sp ecifically, it utilizes

the fact that the difference in refractive index between

the air an d th e ti p/tu be is larg er th an the differen ce be-

tween the liquid and the tip/tube.

Type Features Shape, sens ing distance (mm )* Model number

Light ON when liquid is present

(ideal for checking lower limits) Applicable tube: Transparent tube with a

diameter of 3.2, 6.4, or 9.5 mm and a rec-

ommended wall thickness of 1 mm E32-A01

Light ON when liquid is absent

(ideal for checking for overflow) Applicable tube: Transparent tube with a

diameter in the range 6 to 13 mm and a

recommended wa ll thickness of 1 mm E32-A02

No restriction on tube diameter, resis-

tant to bubbles and drops of water Applicable tube: Transparent tube (no re-

striction on diameter) E32-D36T

Heat-resistant up to 200°C, shape pre-

vents liquid buildup Liquid-contact model E32-D82F1

Application-specific Models

Label Detection

10 mm

• Built-in lens and high-power beam enable t he reliable detec

tion of labels through a mounting board.

• These Fiber Units can be washed with hydrogen peroxide,

making them ideal for the food industry.

E32-G14

Detecti ng lab els

Ambient tem-

perature −40°C to 70°C (no icing or condensation)

Fiber material Plastic

Degree of

protection IP67

Through-beam

Liquid-level Detection

• Area sensing is possible with minimal influence from

bubbles and drops of water (E32-A01/A02/D36T).

• For safety when disconnections occur, two models

have been developed, a light ON model for liquid pres-

ence an d a light ON m odel for liqui d absence (E32 -A01/

A02).

E32-D36T E32-D82F1

Tube-mou nti ng model Liquid-co ntact model Air

Liquid

No liquid

present Liquid

present

Air Tube Liquid

Liquid-contact modelTube-mounting

Tube-mounting

Liquid-

ontact

ì¡í²ÅEÉAÉvÉäÉPÅ[ÉVÉáÉì

■ Overview of Model Variations

*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

■ Engineering Data (E32-A07/A08/L16)

Type Features Shape , s en sing distan ce (mm)* Model number

0 to 15 mm, w ide- range sensing 0 to 15 E32-L16

Long-distance sensing 10 to 20 E32-A08

15 to 25 E32-A07E1

E32-A07E2

Heat-resistant up to 300°C 5 to 18 E32-L66

■ Engineering Data (E32-A09)

Type Features Shape, sensing distance (mm)* Model num ber

Large- di am eter lens ensures r e-

sistance to tilting 15 to 38 (center: 25) E32-A09

Heat-resistant up to 150°CE32-A09H

Heat-resistant up to 300°C 20 to 30 (cen t er : 25 ) E32-A09H2

Application-specific Models

Glass-substrate Alignment

•

There is little variation of detection position within the

detection ran ge (

0.1 mm max.)

• The dif ferent mo del vari ations can handle a varie ty of

sensing distances and temperature conditions.

E32-L16 2.5

3.0 3.5 4.5 5.0 6.0

Detection-Position Characteristic (Typical Examples)

Detection

osition, X

(

)

E32-A07

E32-A08

E32-L16

Sensing distance, Y (mm)

Sensing object: Raw glass

(t = 0.7 mm, rounded edge)

Limited-reflective

Glass-substrate Mapping

• These mode ls can reliabl y detect thin g lass-subst rate

end faces (t = 0.5 mm, beveled edge).

• Using a large-diameter lens makes it possible to cope

with tilting of the glass substrates.

E32-A09

X mm

Angle Characteristics in Left and Right Directions

(Typical Example)

Rate of change of digital

light-intensity value (%)

Angle, θ (o)

Sensing object: Raw glass

(t = 0.5 mm, beveled/rounded edge) Sensing object: Raw glass

(t = 0.5 mm, rounded edge)

−θ

+θ

25 mm

−10 −8−6−4−20 2 46 810

100

Emission side

Reception side

Sensing distance, X (mm)

300

250

200

150

100

00 10203040506070

Digital Light-intensity Value vs Sensing Distance

(Typical Examples)

Digital light-intensity value

Rounded

edge

Beveled

edge

Limited-reflective

Features/Applications

■ Overview of Model Variations

*The sensing distances apply for use in combination with the E3X-DA-S Amplifier Unit (general-purpose, standard mode).

■ Features

■ Engineering Data

Type Features Shape, sensing distance (mm)* Model num ber

Opening angle: 1.5° 890 E32-A03

With mounting

flange E32-A03-1

Open ing angle: 3° ultraslim 340 E32-A04

With mounting

flange E32-A04-1

Application-specific Models

Wafer Mapping

• Wafers are reliable detected with an ultrafine beam.

• The optical axis is adjusted before delivery to allow

easy installation. E32-A03

E32-A03-1

Direction of rotation

Vertical rotation

Optical axis adjusted

before delivery so

that displacement is

typically within 0.1°.

8-inch Wafer Mapping Characteristic (Typical Examples)

Rate of change of digital light-intensity

value (%)

Distance moved

(

)

−10 −9−8−7−6−5−4−3−2−101234

180

140

160

120

100

Wafer piles can

also be detected

170 mm

Fiber Fiber

6.35 mm

2-wafer pile Silicon wafer

(t = 0.75 mm)

For

2 wafers For

1 wafer

Through-beam

Long-distance and

♦Impressive long-distance sensing capacity (up to 7 m)

♦MSR function for eliminating light not reflected from the reflector

♦Size-adjustable line and area beams

♦Parallel light kept at a constant diameter of 2 mm

for up to 1 m

♦Adjustment function for adjusting the optical axis

Glass detection through a view port

Responding to the Increasing

Size of Installations

Wafer Ejection inspection

E3C-LDA-series Photoelectric Sensors with Separate Digital Amplifiers (Laser Type)

High-precision Sensing and

Simple Installation

Ordering Information

*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set

to optimum values.

*2. Indicates models that allow free cutting.

Type Appearance (mm) *2 Sensing di stance (m m ) Standard object

(min. sensing

object) (mm) *1

Min. ben d-

ing radius

(mm) Features M odel number

1 dia.

(0.0 05 dia. )

M4 screw E32-T1 1R

3-dia. cylinder E32-T12R

Flat shape E32-T15XR

M4 screw, with

sleeve E32-TC200BR

E32-TC200B4R

3-dia. cylinder,

side-view E32-T14LR

Flat sh ape,

side-view E32-T15YR

Flat sh ape,

flat-view E32-T15ZR

0.5 dia.

(0.005 dia.)

M3 screw

(small) E32-T21R

2-dia. cylinder

(small) E32-T22R

1.5-dia. cylinder

(small) E32-T222R

Flat sh ape

(small) E32-T25XR

M3 screw

(small), with

sleeve

E32-TC200FR

E32-TC200F4R

1-dia. cylinder

(small),

side-view E32-T24R

Flat sh ape

(small),

side-view E32-T25YR

Flat sh ape

(small),

flat-view E32-T25ZR

Through-beam Fiber Units

h-resolution mode Su

er-hi

h-s

eed mode *When used in combination with the E3X-DA-S Am

lifier Unit

eneral-

ose

)

.Standard mode

Standard models

Flexible (new standard)

Standard size

140 530 700

3 dia.

15 × 8 × 3

1.2 dia.

Min. bending radius

of sleeve: 5

( ): E32-TC200B4

90 (40)

3 dia.

50 210

270

15 × 8 × 3

Small size

130

160

2 dia.

1.5 dia.

12 × 7 × 2

M3 0.9 dia.

90 (40)( ): E32-TC200F4R

Min. bending radius

of sleeve: 5

1 dia.

12 × 7 × 2

*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set

to optimum values.

*2. Indicates models that allow free cutting.

Type Appearance (mm) *2 Sensing distance (mm) Standard object

(min. sensing

object) (mm) *1

Min. bend-

ing radius

(mm) Features Model number

1 dia.

(0.00 5 dia. ) R25

M4 scre w E32-TC200

3-dia. cyli nder E32 -T12

Flat shape E32-T15X

M4 screw, wi th

sleeve E32-TC200B

E32-TC200B4

3-dia. cylinder,

side-view E32-T14L

Flat shape,

side-view E32-T15Y

Flat shape,

flat-view E32-T15Z

M3 screw

(small)

E32-TC200A

0.5 dia.

(0.00 5 dia. ) R10

E32-TC200E

2-dia. cyli nder

(small) E32-T22

1.5-dia. cyl i n-

der (smal l) E32-T222

Flat shape

(small) E32-T25X

M3 screw

(small),

with sleeve

E32-TC200F

E32-TC200F4

1-dia. cyli nder

(small), side-

view E32-T24

Flat shape

(small), side-

view E32-T25Y

Flat shape

(small),

flat-view E32-T25Z

Through-beam Fiber Units

h-resolution mode Su

er-hi

h-s

eed mode *When used in combination with the E3X-DA-S Am

lifier Unit

eneral-

ose

)

.Standard mode

Standard models

tandard

Standard size

760

200

1,000

15 × 8 × 3

1.2 dia.

Min. bending radius

of sleeve: 5

( ): E32-TC200B4

90 (40)

3 dia.

120 460 600

15 × 8 × 3

Small size

M3 180

900

680

50 220

270

2 dia.

1.5 dia.

12 × 7 × 2

M3 0.9 dia.

90 (40)( ): E32-TC200F4R

Min. bending radius

of sleeve: 5

1 dia.

130

160

12 × 7 × 2

*3. The optical fiber is 10 m long on each side, so the sensing distance is 20,000 mm.

*4. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm.

Type Appearanc e (mm) *2 Sensing distance (m m ) Standard object

(min. sensing

object) (mm) *1

Min.

bending

radius

(mm)

Features Model number

1 dia

(0.005 dia.)

M4 sc rew E 32-T11

3-dia. cyli nder E32-T12B

Flat shape E32-T15XB

0.5 dia

(0.005 dia.)

M3 screw

(small) E32-T21

2-dia. cyli nder

(small) E32-T221B

1.5-dia. cyl i n-

der (small) E32-T22B

Flat shape

(small) E32-T25XB

1 dia.

(0.005 dia.) R4

M4 screw,

fluorine coating

E32-T11U

10 dia.

R25

Large buil t-i n

len s, M14

screw E32-T17L

4 dia. (0.1 dia . )

M4 sc rew E32-TC200+

E39-F1

M4 sc rew,

flexible fiber E32-T11R+

E39-F1

M4 sc rew,

break-resistant E32-T11+

E39-F1

R25

Screw mount-

ing, side -v ie w E32-T14

1.4 dia.

(0.01 dia.)

M4 scre w E32-T11L

3-dia. cyli nder E32-T12L

Through-beam Fiber Units

Standard models

Break-resistant

Standard size

180

900

680

3 dia.

15 × 8 × 3

Small size

45 200

240

2 dia.

1.5 dia.

12 × 7 × 2 35

180

150

Coating

M4 180

900

680 U

Special-beam models

Long-distance, high-power

M14

20,000*3

4,000

4,000*4

1,500

4,000*

3,700

970 R

4,000*

3,600

930 B

4,000*4

3,400

900

350

1,700

1,330

3 dia.

*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set

to optimum values.

*2. Indicates models that allow free cutting.

*3. This is the value for which detection is possible within t he sen sing area, with the sensing dis tance set to 300 mm. (T he sensing object is stationary.)

Type Appearanc e (mm) *2 Sensing di sta n ce (mm) Standard object

(min. sensing

object) (mm)* 1

Min. bend-

ing radius

(mm) Features Model nu m ber

3 dia. (0.1 dia . )

R25 M4 screw,

side-view E32-T11L+

E39-F2

M4 screw,

side-view,

flexibl e fiber

E32-T11R+

E39-F2

M4 screw,

side-view,

break-resis-

tant

E32-T11+

E39-F2

0.9 dia.

(0.005 dia.) R10

M3 screw

(small) E32-T21L

2-dia. cylinder

(small) E32-T22L

0.5 dia.

(0.005 dia.) R1

1-dia. cylinder,

flexibl e fiber E32-T223R

0.25 dia.

(0.005 dia.)

R10

0.5-dia.

sleeve; 0.25-

dia. opening E32-T33-S5

0.125 dia.

(0.005 dia.)

0.25-dia.

sleeve, 0.125-

dia. opening E32-T333-S5

0.1 dia.

(0.005 dia.)

0.22-dia.

sleeve, 0.1-

dia. opening E32-T334-S5

1.7 dia.

(0.1 dia.)

R10

3-dia. cylinder E32-T22S

2 dia. (0.1 dia . ) 3.5-dia. cylin-

der, si de-view E32-T24S

(0.2 dia.) *3

R1 Are a width:

11 mm

E32-T16PR

R10 E32-T16P

R1 Are a width:

11 mm; side-

view

E32-T16JR

R10 E32-T16J

Through-beam Fiber Units

h-resolution mode Su

er-hi

h-s

eed mode *When used in combination with the E3X-DA-S Am

lifier Unit

eneral-

ose

)

.Standard mode

Special-beam models

Long-distance, high-power

180 800

910

520

400

100 R

820

660

160 B

M3 540

440

100

2 dia.

Ultracompact, thin-sleeve

1 dia. 130

160

30 R

Sleeve cannot be bent.

3 dia. 0.5 dia. 53

Sleeve cannot be bent.

3 dia. 0.25 dia. 12

Sleeve cannot be bent.

3 dia. 0.22 dia. 6

Fine-beam

3 dia.

2,500

1,900

500

3.5 dia. 1,750

1,300

350

Area-sensing

1,100

840

220 R

1,500

1,100

300

980

750

190 R

1,300

1,000

260

*4. This i s th e value fo r which detection is possible within the sensing area, wi th th e s ensing distance set to give a di g ital value of 1,00 0. (The sen sing obj ect is sta-

tionary.)

*5. For continuous operation, use the products within a temperature range of−40°C to 130°C.

*6. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.

*7. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm.

Type Appearance (mm) *2 Se nsing distance (mm) Standard object

(min. sensing

object) (mm)* 1

Min.

bending

radius

(mm) Features Model nu m ber

(0.3 dia. ) *3 R1 Area width:

30 mm

E32-T16WR

R10 E32-T16W

(0.6 dia. ) *4

R25

Area width:

10 mm; long dis-

tance E32-T16

2 dia. (0.1 dia ) Multi- poi nt detec-

tion (4-head) E32-M21

150°C*5 1.5 dia.

(0.1 dia. ) R35

Heat- re si st an t up

to 150°CE32-T51

Heat- re si st an t up

to 150°C; side-

view E32-T54

200°C*6

1 dia.

(0.005 dia.) R10 Heat-resistan t up

to 200°CE32-T81R-S

3 dia. (0.1 dia .)

R25

Heat- re si st an t up

to 200°C; side-

view

E32-T61-S+

E39-F2

4 dia. (0.1 dia .) Heat- re si st an t up

to 200°C, long

distance

E32-T61-S+

E39-F1

1.7 dia.

(0.1 dia)

Heat- re si st an t up

to 200°C; L-

shaped; long dis-

tance

E32-T84S-S

350°C*6 1 dia.

(0.005 dia.) Heat- re si st an t up

to 350°CE32-T61-S

4 dia. (0.1 dia .)

R4 Fluororesin cover,

roun d head E32-T11F

R40

Fluororesin cover,

long distance E32-T12F

3 dia. (0.1 dia .) Fluororesin cover,

side-view E32-T14F

4 dia. (0.1 dia .) Fluororesin cover,

heat - resi stant up

to 150°C *5 E32-T51F

1 dia.

(0.005 dia.) R10 Fluororesin cover,

heat - resi stant up

to 200°C *6 E32-T81F-S

Through-beam Fiber Units

Special-beam models

Area-sensing

1,700

1,300

340 R

2,300

1,800

450

3,700

2,800

740

750

610

140

Environment-resistive models

Heat-resistant

1,000

760

200

2 dia. 300

230

360

280

600

450

120

4,000*7

3,400

900

3 dia. 1,750

1,300

350

600

450

120

Chemical-resistant

7.2 dia.

2,500

2,000

520

5 dia.

4,000*7

3,000

800

5 dia. 500

400

100

5 dia.

1,800

1,400

350

6 dia.

920

700

190

*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set

to optimum values.

*2. Indicates models that allow free cutting.

Flanges

Fiber Units for Atmospheric-pressure Side

Lens Units

Mounting Brac ke ts

Through-beam Fiber Units

Type Appearanc e (mm) *2 Sensing distance (mm) Standard object

(min. se ns in g ob-

ject) (mm) *1

Min. bending

radius (mm) Features Model number

1.2 dia. (0.01 dia.)

R30

M4 screw, heat-

resistant up to

120°CE 32- T5 1V 1M

4 dia. ( 0.1 di a.)

M4 screw, heat-

resistant up to

120°C, long dis-

tance

E32-T51V 1M+

E39-F1V

1.2 dia. (0.01 dia.) L-shaped , h eat -

resistant up to

120°CE 32- T5 4V 1M

4 dia. ( 0.1 di a.)

L-shaped , h eat -

resistant up to

120°C, long dis-

tance

E32-T54V 1M+

E39-F1V

2 dia. ( 0.1 di a.) R25

L-shaped , h eat -

resistant up to

200°C, long dis-

tance

E32-T84SV 1M

h-resolution mode Su

er-hi

h-s

eed mode *When used in combination with the E3X-DA-S Am

lifier Unit

eneral-

ose

)

.Standard mode

Environment-resistive models

Vacuum-resistant

260

200

1,350

1,000

260

130

210

180 500 660

130 480 630

Appearance (mm) Type Model nu mber

4-chan nel fla nge E32-VF4

1-chan nel fla nge E32-VF1

Appearance (mm) Type Model nu mber

Amplifier-Flange

Conne ct ion Fi ber

E32-T10V 2M

Appear-

ance (mm) Type Quan-

tity Remarks

E39-F1V 2 Long-d is ta nc e Lens Unit

Can be used for the E32-

T51V and t he E3 2-T54V.

Appear-

ance (mm) Type Quan-

tity Remarks

E39-L54V 2 Can be used for the E32-

T54V.

Ordering Information

*1. The sensing distances are for white paper.

*2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set

to optimum values.

*3. Indicates models that allow free cutting.

Type Appearance (mm) *3 Sensing distance (mm) *1 (Min . se nsing

object) (mm) *2 Min. bending

radius (mm) Features Model num ber

(0.005 dia.) R1

M6 screw E32-D11R

3-dia. cy lin der E32-D12R

Flat shape E32-D15XR

M6 screw,

with sleeve

E32-DC200BR

E32-DC200B4R

6-dia. cylinder,

side-view E32-D14LR

Flat shape,

side-view E32-D15YR

Flat shape,

flat-view E32-D15ZR

M4 screw

(small) E32-D211R

M3 screw

(small) E32-D21R

3-dia. cylinder

(small) E32-D22R

Flat panel

(small) E32-D25XR

M3 screw

(small), with

sleeve

E32-DC200FR

E32-DC200F4R

2-dia. cylinder

(small),

side-view E32-D24R

Flat shape

(small),

side-view E32-D25YR

Flat shape

(small),

flat-view E32-D25ZR

Fiber Units with Reflective Sensors

h-resolution mode Su

er-hi

h-s

eed mode *When used in combination with the E3X-DA-S Am

lifier Unit

eneral-

ose

)

.Standard mode

Standard models

Flexible (new standard)

Standard size

300

170

3 dia.

15 × 10 × 3

2.5 dia.

Sleeve can-

not be bent.

6 dia. 80

15 × 10 × 3 70

15 × 10 × 3

Small size

3 dia.

12 × 8 × 3

1.2 dia.

Min. bending

radius of

sleeve: 5

2 dia. 26

12 × 8 × 2 14

12 × 8 × 2

*1. The sensing distances are for white paper.

*2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set

to optimum values.

*3. Indicates models that allow free cutting.

Type Appearance (mm) *3 Sensing distance (mm) *1 (Min. se nsing

object) (mm) *2

Min.

bending

radius

(mm)

Features Model num ber

(0.005 dia.)

R25

M6 screw E32-DC200

3-dia. cylinder E32-D12

Flat shape E32-D15X

M6 screw,

with sleeve E32-DC200B

E32-DC200B4

6-dia. cylinder,

side-view E32-D14L

Flat sh ape,

side-view E32-D15Y

Flat sh ape,

flat-view E32-D15Z

R10

M4 screw

(small) E32-D211

M3 screw

(small) E32-DC200E

3-dia. cylinder

(small) E32-D22

Flat sh ape

(small) E32-D25X

M3 screw

(small),

with sleeve

E32-DC200F

E32-DC200F4

2-dia. cylinder

(small),

side-view E32-D24

Flat sh ape

(small),

side-view E32-D25Y

Flat sh ape

(small),

flat-view E32-D25Z

Fiber Units with Reflective Sensors

h-resolution mode Su

er-hi

h-s

eed mode *When used in combination with the E3X-DA-S Am

lifier Unit

eneral-

ose

)

.Standard mode

Standard models

tandard

Standard size

500

300

3 dia.

400

230

15 × 10 × 3 500

300

2.5 dia.

90 (40)

( ): E32-DC200B4

Sleeve cannot

be bent.

6 dia. 200

110

15 × 10 × 3

100

15 × 10 × 3

Small size

130

3 dia.

12 × 8 × 2

1.2 dia.

90 (40)

( ): E32-DC200F4

Min. bending ra-

dius of sleeve: 5

2 dia. 50

12 × 8 × 2 35

12 × 8 × 2

Type Appearance (mm) *3 Sensing distanc e (mm) *1 (Min. sensing

object) (mm) *2

Min.

bending

radius

(mm)

Features M odel number

(0.005 dia .)

M6 screw E 32- D 11

Flat shape E32-D15XB

M4 screw

(small) E32-D21B

3-dia. cylinder

(small) E32-D221B

M3 screw

(small) E32-D21

1.5-dia. cylinder

(small) E32-D22B

Flat shape

(small) E32-D25XB

(0.005 dia .)

M6 screw,

fluorine coating E32-D11U

---

Large built-in

lens , scre w

mounting E32-D16

(0.005 dia .)

R25 M6 screw E 32- D11L

R10

M4 screw E 32- D21L

3-dia. cylinder E32-D22L

0.8-dia. sleeve E32-D33

0.5-dia. sleeve E32-D331

Fiber Units with Reflective Sensors

Standard models

Break-resistant

Standard size

M6 300

170

15 × 10 × 3

Small size

M4 110

3 dia.

M3 50

1.5 dia.

12 × 8 × 2 50

Coating

300

170

50 U

Special-beam models

Long-distance, high-power

17.5

40 to 700

40 to 1,000

40 to 240 B

650

400

110

M4 210

130

3 dia.

Ultracompact, thin-sleeve

Sleeve cannot be bent.

3 dia. 0.8 dia.

Sleeve cannot be bent.

2 dia.0.5 dia.

0.8

*1. The sensing distances are for white paper.

*2. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set

to optimum values.

*3. Indicates models that allow free cutting.

Type Appearance (mm) *3 Sensing distan c e (mm) *1 (Min. sensing

object) (mm) *2

Min.

bending

radius

(mm)

Features Model number

(0.005 dia.)

R4 M6 sc rew

E32-CC200R

R25

E32-CC200

3-dia. cy lind er E32-D32L

M3 screw

(small) E32-C31

2-dia. cy linder

(small) E32-D32

6 to 15 m m ; spot di am et er : 0.1 to

0.6 mm Small sp ot

(variable)

E32-C42+

E39-F3A

Spot diameter of 0.5 to

1 mm at di st an ces in the

range 6 t o 15 mm

E32-D32+

E39-F3A

Spot di am eter of 0.1 mm at 7 mm

Small spot

E32-C41+

E39-F3A-5

Spot diameter of 0.5 mm at

7 mm E32-C31+

E39-F3A-5

Spot di am eter of 0.2 mm at 17 m m Long distance,

smal l spot

E32-C41+

E39-F3B

Spot diameter of 0.5 mm at

17 mm E32-C31+

E39-F3B

Spot diameter of 4 mm max. at distanc-

es in the ra nge 0 to 20 mm

Long-distance

sensing, parallel

light

E32-C31+

E39-F3C

(0.005 dia.)

Beam width:

11 mm E32-D36P1

(0.1 dia. ) R10 M6 screw E32-R21+

E39-R3

(Attached)

(0.2 dia. ) R25 Screw mounting,

long dist ance

E32-R16+

E39-R1

(Attached)

Fiber Units with Reflective Sensors

h-resolution mode Su

er-hi

h-s

eed mode *When used in combination with the E3X-DA-S Am

lifier Unit

eneral-

ose

)

.Standard mode

Special-beam models

Coaxial, small-spot

250

150

45 R

500

300

3 dia.

250

150

M3 120

2 dia.

4-dia. spot

Area-sensing

250

150

45 B

Retroreflective

E39-R3

Reflector

10 to 250

E39-R3

Reflecto

150 to 1,500

*4. For continuous operation, use the products within a temperature range of −40°C to 90°C.

*5. For continuous operation, use the products within a temperature range of −40°C to 130°C.

*6. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.

Type Appearance (mm) *3 Sensing distance (mm) *1 (Min. sensing

object) (mm) *2

Min.

bending

radius

(mm)

Features Model number

(0.00 5 dia. )

R25

Small level dif-

ferences, hi gh

power, side-view E32-L25

Small level dif-

ferences, to p-

view E32-L25A

R10

Ultracompact,

flat-view E32-L24S

Heat resistant

up to 105°C *4,

top-view E32-L24L

Heat resistant

up to 105°C *4,

top-view E32-L25L

R25

Heat resistant

up to 200°C, fl at-

view E32-L86

Wide-range

sensing, flat-

view E32-L16

150°C*5

(0.00 5 dia. )

R35 Heat resistant

up to 150°CE32-D51

200°C*6 R10 Heat resistant

up to 200°CE32-D81R-S

E32-D81R

350°C*6

R25

Heat resistant

up to 350°CE32-D61-S

E32-D61

400°C*6 Heat resistant

up to 400°C,

with sleeve

E32-D73-S

E32-D73

(0.00 5 dia. ) R40

Fluorores i n cov -

er, long dist ance E32-D12F

Fluorores i n cov -

er, side-vi ew E32-D14F

Fiber Units with Reflective Sensors

Special-beam models

Limited-reflective

3.3

0 to 4

2 to 6 (center: 4)

5.4 to 9 (center: 7.2)

4 to 10

0 to 15

0 to 1

Environment-resistive models

Heat-resistan

400

230

M6 150

M4 1.25 dia.

Min. bending radius

of sleeve: 10

100

Chemical-resistant

6 dia.

160

6 dia. 70

Ordering Information

*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set

to optimum values.

*2. Indicates models that allow free cutting.

*3. For continuous operation, use the products within a temperature range of −40°C to 130°C.

*4. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.

*5. These values are based on the assumption that there are no repeated sudden changes in temperature.

Type Appearanc e (mm) *2 Sensing distance (mm) Standard object

(min. se nsing

object) (mm)*1

Min. ben d-

ing radius

(mm) Features Model number

4 dia. (0.1 di a. ) R25

Slot sensor (no ad-

justment of opti cal

axis requ ired ) E32-G14

Screw mounting,

side-view E32-T14

Applicable tube: Transparent tube with a diameter

in the ran ge 8 t o 10 mm and a recom m ended wall

thickness of 1 mm R10 Compact E32-L25T

Applicable tube: Transparent tube (no restriction on

diameter)

No restriction on

tube diameter, re-

sistant to bubbles

and drops of water

E32-D36T

Applicable tube: Transparent tube with a diameter

of 3.2, 6.4, or 9.5 m m and a r ecommended w all

thickness of 1 mm

Light ON when fluid

is present, resistant

to bubbles and

drops of water

E32-A01

Applicable tube: Transparent tube with a diameter

in the ran ge 6 t o 13 mm and a recom m ended wall

thickness of 1 mm

Light ON when fluid

is not present, resis-

tant to bubbles and

drops of water

E32-A02

Liquid-contact models R40 Heat resistant up

to 200°C,

fluoror esi n cover

E32-D82F1

E32-D82F2

Soda glas s

with reflec tion

factor of 7%

R25

Variation of de te c-

ti on posi tion wi thin

the detect i on

range: 0.2 mm

E32-L16

E32-A08

E32-A07E1

E32-A07E2

R25 Heat resistant up

to 300°C *4, *5 E32-L66

Edge of so da

glass wi th re-

flection factor

of 7% (t = 0.5

mm, rounded

edge)

R25 Resis t ant to tilting E32-A09

R35 Heat resistant up

to 150°C *3 E32-A09H

R25 Heat resistant up

to 300°C *4, *5 E32-A09H2

Application-specific Fiber Units

h-resolution mode Su

er-hi

h-s

eed mode *When used in combination with the E3X-DA-S Am

lifier Unit

eneral-

ose

)

.Standard mode

Application-specific models

Label-detection

4,500

3,400

900

Liquid-level detectionGlass-substrate-alignment

0 to 15

0 to 12

10 to 20

15 to 25

5 to 18

5 to 15

Glass-substrate-mapping

15 to 38 (center: 25)

20 to 30 (center: 25)

Type Appearanc e (mm) *2 Sensing distance (mm) Standard object

(min. sensing

object) (mm)*1

Min. bend-

ing radius

(mm) Features Model nu m ber

2 dia. (0.1 dia.)

Opening angle: 1.5°;

optical axis adjusted

before de liv er y E32-A03

R10

Opening angle: 1.5°;

with mounting

flange; op tic al axis

adjusted before de-

livery

E32-A03-1

Long distance;

opening angle: 6°E32-T24S

1.2 dia.

(0.1 dia.)

Ultrasl im (t = 2 mm);

opening angle: 3°;

optical axis adjusted

before de liv er y

E32-A04

Ultrasl im (t = 2 mm);

opening angle: 3°;

with mounting

flange; op tic al axis

adjusted before de-

livery

E32-A04-1

Application-specific Fiber Units

Application-specific models

Wafer-mapping

3 dia.

1,150

890

250

3 dia.

3.5 dia. 1,750

1,300

350

2 dia.

460

340

100

2 dia.

*1. The values for the minimum sensing object are representative values that indicate values obtained in standard mode with the sensing distance and sensitivity set

to optimum values.

Lens Units

*2. The optical fiber is 2 m long on each side, so the sensing distance is 4,000 mm.

Type Appearance Applicable Fibe r

Units

Sensing dis ta nce (mm) Standard object

(min. sensing

object ) (mm) *1 Features Model number

High-res-

olution

mode

Standard

mode

Super-

high-

speed

E32-T11L 4,000*2 3,200 840

4 dia. (0.1 dia .)

Long-distance

sensi ng; ope n-

ing angle: 5°C

to 40°C (heat

resistant up to

200°C)

E39-F1

E32-TC200 4,000*2 4,000*2 1,500

E32-T11R 4,000*2 3,700 970

E32-T11 4,000*2 3,600 930

E32-T11U 4,000*2 3,600 930

E32-T81R-S 2,650 2,100 520

E32-T61-S 4,000*2 3,400 900

E32-T11L 910 800 180

3 dia. (0.1 dia .)

Side-view,

space-saving

(heat resistant

up to 200°C)

E39-F2

E32-TC200 840 700 160

E32-T11R 520 400 100

E32-T11 820 660 160

E32-T11U 820 660 160

E32-T81R-S 360 280 70

E32-T61-S 600 450 120

E32-T11L

E32-TC200

E32-T11R

E32-T11

E32-T11U

E32-T81R-S

E32-T61-S

--- ---

Long distance

reflection (heat

resistant up to

200°C)

E39-F3

E32-C42 Spot diamet er var i able in the range 0.1 to 0.6

mm at di st anc es in the range 6 to 15 mm Smal l sp ot

(variable) E39-F3A

E32-D32 Spot diameter variable in the range 0.5 to 1 mm

at distances in the range 6 to 15 mm

E32-C 41 0.1- di a. spot at a distance of 7 m m Smal l spot E39-F3A-5

E32-C 31 0.5- di a. spot at a distance of 7 m m

E32-C 41 0.2- di a. spot at a distance of 17 m m Long distance,

small spot E39-F3B

E32-C 31 0.5- di a. spot at a distance of 17 m m

E32-C31

E32-C41 Spot diamet er of 4 mm max. at distance s i n the

range 0 t o 20 m m

Long-distance

sensi ng, par al-

lel light E39-F3C

Accessories

hrough-beam Lens Units

Long-distance Lens Units

Side-view Units

Reflection Units

Reflective Lens Units

Small-spot Lens Units

Protective Spiral Tube

Note: Before using a Protective Spiral Tube, remove the protective tube that protects the area between the head and the optical fiber provided with some models .

Other Accessories

Appearance Application Applicable Fiber Units Tube length Mod el numb er

Fiber protection

M3-screw models

E32-D21@

E32-DC200E

E32-DC200F@

E32-C31

500 mm E 39- F32A5

1 m E39- F32A

M3-screw models

E32-T21@

(Except the E32-T21R.)

E32-TC200E

E32-TC200F@

500 mm E 39- F32B5

1 m E39- F32B

M4-screw models

E32-T11@

E32-TC200

E32-TC200B@

E32-T51

500 mm E 39- F32C5

1 m E39- F32C

M6-screw models

E32-D11@

E32-DC200

E32-DC200B

E32-CC200@

E32-D51

500 mm E 39- F32D5

1 m E39- F32D

Appearance Application Name Applicable Fiber Units Remarks Model number

Used to cut the fiber. Cutter Fiber Unit s th at al low free cutting Provided w i th applica-

ble Fiber Un its. E39-F4

Attachments for in-

serting thin fibers into

Amplifier Units

Thin-fiber At-

tachments Fiber Units that allow free cut t in g

and have a 1. 0- di a. sheath

• 2 per set

•

Provided with applic a-

ble Fiber Units.

E39-F9

Used to extend fibers.

Fiber Co nnec-

tors

Fiber Unit s that al low free cutting

and have a 2. 2- di a. sheath --- E39-F10

Easy-to-use, one-

touch rel ay conn ec-

tors Fiber Units that al low free cutting

E39-F13: Used for Fi-

ber Units w i th a 2. 2-

dia. sheat h.

E39-F14: Used for Fi-

ber Units w i th a 1. 0-

dia. sheat h.

E39-F15: Used for Fi-

ber Units with a

sheath d ia m et er be-

tween 1.0 and 2.2

mm.

E39-F13

E39-F14

E39-F15

Used to bends in

sleeves. Sleeve Bend-

E32-TC200B(4)

E32-TC200F(4)

E32-DC200F(4) --- E39-F11

Accessories

Ratings/Characteristics

Fiber Units

*1. There must be no icing or condensation within the range specified for the ambient operating temperature.

*2. For continuous operation, use the products within a temperature range of −40°C to 90°C.

*3. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.

Item

Type Stan dar d m odels

Flexible Standard Break-resistant Fluorine-coating

E32-T1@R

E32-D1@RE32-T2@R

E32-D2@R

Ambi ent operating

temp er at ur e *1 −40°C to 70°C

Ambi ent humidity *1 35% to 8 5%

Fiber material Plastic (PVC coating) Plastic (polyethylene coating) Plastic (PVC coating) Plastic

(fluororesin coating)

Degree of protection IE C st andard: IP67

Item

Type Speci a l-beam models

Long-distance, high-power Ultracompact,

ultrafine-sleeve Coaxial, small-spot Fine-beam

(narr ow vi sion fi el d)

All other models E32-D16

Ambi ent operating

temp er at ur e *1 −40°C to 70°C

Ambi ent humidity *1 35% to 8 5%

Fiber mater i a l Plastic (polyethylene

coating) Plastic (PVC coating) Plastic (combination of PVC, polyethylene,

and p olyol efin sheaths) Plastic (PVC coating)

Degree of protection IE C st andard: IP67 IEC standar d: IP40 IEC standard : IP67

Item

Type Speci a l-beam models

Area-sensing Retroreflective

All other models E32-D36P1

E32-T16 E32-T16W(R) E32-R21 E32-R16

Ambi ent operating

temp er at ur e *1 −40°C to 70°C−25°C to 55°C−40°C to 70°C−25°C to 5 5 °C

Ambi ent humidity *1 35% to 8 5%

Fiber material Plastic (PVC coating) Plastic (polyethylene

coating) Plastic (PVC coati ng) Plastic (polyethylene coa t ing)

Degree of protection IEC st andard: IP50 (IP67 f or E 32- T16) IEC stan dar d: IP67 IEC st andard: IP66

Item

Type Speci a l-beam models

Limited-reflective

All othe r m od el s E32-L25L

E32-L24L E32-L86

Ambi ent operating

temp er at ur e *1 −40°C to 70°C−40°C to 105°C *2 −40°C to 200°C *3

Ambi ent humidity *1 35% to 8 5%

Fiber ma terial Pl astic (polyethyle ne c oat i ng) Glass ( SU S spiral coating)

Degree of protection IEC standard: IP50 (IP 40 for E 32- L24S, E32-L16, an d E32-L86)

Fiber Units

*1. There must be no icing or condensation within the range specified for the ambient operating temperature.

*2. For continuous operation, use the products within a temperature range of −40°C to 90°C.

*3. The maximum temperature that can be withstood varies with the location. Refer to dimensions diagrams for details.

*4. For continuous operation, use the products within a temperature range of −40°C to 130°C.

*5. These values are based on the assumption that there are no repeated sudden changes in temperature.

Item

Type Envi ro nm ent-resistive models

Heat-resistant

E32-T5@

E32-D5@

E32-T8@R-S

E32-D8@R-S E32-T84S-S E32-T6@-S

E32-D6@-S E32-D73-S

Ambi ent operating

temp er at ur e *1 −40°C to 150°C *4 −40°C to 20 0°C *3 −60°C to 350°C *3 −40°C to 400 °C *3

Ambi ent humidity *1 35% to 8 5%

Fiber mater i a l Plastic (fluororesin

coating) Glass (fluororesin

coating) G l ass (SUS spiral co at in g)

Degree of protection IE C st andard: IP67

Item

Type Envi ro nm ent-resistive models

Chemical-resistant Vacuum-resistant

All other m odels E32-T51F E32-T81F-S All other mod els 32-T84SV

Ambi ent operating

temp er at ur e *1 −40°C to 70°C−40°C to 150°C *4 −40°C to 200°C * 3 −25°C to 120°C−25°C to 200°C

Ambi ent humidity *1 35% to 8 5%

Fiber material Plastic (fluororesin cover) Glass (fluororesin

cover) Glass (fluororesin

coating) Glass (SUS sp i ral

coating)

Degree of protection IE C st andard: IP67 ---

Item

Type Application-specific models

Label-detection Li qui d-leve l det ection Wafer-mapping

All other model s E32-A01

E32-A02 E32-D82F

Ambi ent operating

temp er at ur e *1 −40°C to 70°C−40°C to 200°C *3 −40°C to 70 °C

Ambi ent humidity *1 35% to 8 5%

Fiber material Plastic (polyethylene coating) Plastic

(fluororesin coating) Fluororesin cover Plastic (polyethylene

coating)

Degree of protection IE C st andard: IP67 IEC standar d: IP50 IEC stan dard: IP68 IEC standard: IP50

Other Repeat accuracy: 1 mm max. Repeat accuracy:

0.5 mm max.

Item

Type Application-specific models

Glass-substrate-alignment Glass-substrate-mapping

All other m odels E32-L66 E32-A09 E32-A09H E32-A09H2

Ambi ent operating

temp er at ur e *1 −40°C to 70°C0°C to 300°C *3, *5 −40°C to 70°C−40°C to 150°C *4 −40°C to 3 0 0 °C *3

Ambi ent humidity *1 35% to 8 5%

Fiber mater i a l Plastic (polyethylene

coating) Glass

(SUS spiral coating) Plastic (polyethylene

coating) Plastic

(fluororesin coating) Glass

(SUS spiral coating)

Degree of protection IE C st andard: IP40

Dimensions

Standard/Flexible Models Indicates models that allow free cut ting.

Thro ugh-bea m Fiber Units

M2.6 × 0.45

1 dia. Two hexagonal nuts

Two toothed washers

Sensing head: M4 × 0.7*

*Material: Brass/nickel platin

Optical fiber: 2.2 dia.

3.2 3 2.4

14 2,0007

E32-TC200

E32-T11R E32-TC200E

Two hexagonal nuts

Two toothed washers

Sensing head: M3 × 0.5*

Optical fiber: 1 dia.

11 2,000

10 25

Fiber Attachment (E39-F9)

1.8

5.5

2.5

0.5 dia.

*Material: Brass/nickel plating

2,000

9.5

13.5

5.5

1 dia.*1

1.8 3 dia.

Two hexagonal nuts

Two toothed washers

Sensing head: M3 × 0.5*2

*1. E32-T21R: 0.5 dia.

*2. Material: Brass/nickel plating

Optical fiber: 2.2 dia.

E32-TC200A

E32-T21R

0.5 dia. 2 dia. Sensing head*

*Material: Stainless steel (SUS303)

1722 2,000

Fiber Attachment (E39-F9)

Optical fiber: 1 dia.

1.4 dia.

Heat-shrinkable tube

E32-T22

E32-T22R

1 dia.

2.4 dia. Sensing head: 3 dia.* Optical fiber: 2.2 dia.

(14) 2,000

*Material: Brass/nickel

latin

E32-T12

E32-T12R

1.5 dia.

2,000 Fiber Attachment (E39-F9)

Sensing head*

0.5 dia. Optical fiber: 1 dia.

*Material: Brass/nickel plating

E32-T222

E32-T222R

Optical fiber: Two, 2.2 dia.

Two, 2.2-dia. mounting holes

with 4.4-dia. countersinks

on both sides

Sensing head*

Sensing surface 1 dia.

2,000

2.5

1.5

7.5 5

*Material: Aluminum

E32-T15X

E32-T15XR

Optical fiber: 1 dia.

Sensing head*

Fiber Attachment (E39-F9)

Sensing surface: 0.5

Two, 2.2-dia. mounting holes

with 4.4-dia. countersinks

on both sides

*Material: Aluminum

4.5

72.5

2,000 25

E32-T25X

E32-T25XR

1.2 dia. max.

Stainless-

steel tube

(SUS304)

1 dia.

Two hexagonal nuts

Two toothed washers

Sensing head: M4 × 0.7

(coarse thread) *2

*1. ( ): E32-TC200B4

*2. Material: Brass/nickel plating

Optical fiber: 2.2 dia.

3.2 11 90

(40)*1

2.4 2,0007

E32-TC200B (B4)

E32-TC200BR (B4R)

1.8

5.5

2.5 2,00011

Two hexagonal nuts

0.9 dia.

max.

0.5 dia. Stainless-

steel tube

(SUS304)

Two toothed washers

Sensing head: M3 × 0.5 *2

Optical fiber: 1 dia.

(40)*1

10 25

Fiber Attachment (E39-F9)

*1. ( ): E32-TC200F4

*2. Material: Brass/nickel platin

E32-TC200(F4)

E32-TC200F(F4R)

Sensin

surface

1.5

3 dia.

2.8

Sensing head: 3 dia.*

45°Heat-shrinkable

tube Optical fiber:

2.2 dia.

12 2,000

*Material: Stainless steel

(

SUS304

)

E32-T14L

E32-T14LR

35 2,000

1.50.5

15 12

Fiber Attachment (E39-F9)

Stainless-steel

tube: 1 dia.

45°

Heat-shrinkable tube

Optical fiber: 1 dia.

*Material: Stainless steel

(

SUS304

)

Sensing head:

2 dia.* 1.4 dia.

E32-T24

E32-T24R

Standard/Flexible Models

Break-resistant/Coated Models

Through-beam Fiber Units

Optical fiber: Two, 2.2 dia.

Sensing head*

Sensing surface

*Material: Aluminum

2,000

2.5

1.5

7.5 5

Two, 2.2-dia. mounting holes with

4.4-dia. countersinks on both sides

E32-T15Y

E32-T15YR 2

2.5

2,000 25

54.5

Optical fiber: 1 dia.

Sensing surface

Sensing head*

Fiber Attachment (E39-F9)

Two, 2.2-dia. mounting holes with

4.4-dia. countersinks on both sides

*Material: Aluminum

E32-T25Y

E32-T25YR

Sensing head*

Optical fiber: 2.2. dia.

Sensing surface

Two, 2.2-dia. mounting holes with

4.4-dia. countersinks on both sides *Material: Aluminum

2,000

2.5

1.5

7.5 5

E32-T15Z

E32-T15ZR

Optical fiber: 1 dia.

Sensing head*

Sensing surface

Fiber Attachment (E39-F9)

Two, 2.2-dia. mounting holes with

4.4-dia. countersinks on both sides *Material: Aluminum

2.5

2,000

54.5

E32-T25Z

E32-T25ZR

2.4 15

(14) 2,000

Optical fiber: 2.2 dia.

Two hexagonal nuts

Two toothed washers

Protective tube

3.3

Sixteen, 0.265 dia.

Sensing head:

M4 × 0.7*

M2.6 × 0.45

3.2

*Material: Brass/nickel plating

E32-T11

E32-T11U

5.5

2.5

Four, 0.25 dia.

Sensing head:

M3 × 0.5* Two hexagonal nuts

Two toothed washers

Protective tube Optical fiber: 1 dia. 10 25

Fiber Attachment (E39-F9)

2,00011

1.8 15

*Material: Brass/nickel plating

E32-T21

E32-T12B

Sixteen, 0.265 dia.

2.4 dia. Sensing head: 3 dia.* Optical fiber: 2.2 dia.

(14) 2,000

*Material: Brass/nickel plating

E32-T221B

Four, 0.25 dia. 2 dia. Sensing head*

*Material: Stainless steel (SUS303)

1722 2,000

Fiber Attachment (E39-F9)

Optical fiber:

1 dia.

1.4 dia.

Heat-shrinkable tube

E32-T22B

1.5 dia.

2,000 Fiber Attachment (E39-F9)

Sensing head*

Four, 0.25 dia. Optical fiber: 1 dia.

*Material: Brass/nickel plating

Optical fiber: 2.2 dia.

Sensing head*

Sensing surface:

Sixteen, 0.265 dia.

Two, 2.2-dia. mounting holes with

4.4-dia. countersinks on both sides *Material: Aluminum

2,000

2.5

1.5

7.5 5

E32-T15XB

4.5

72.5

2,000 25

Optical fiber: 1 dia.

Sensing head*

Fiber Attachment (E39-F9)

Sensing surface:

Four, 0.25 dia.

Two, 2.2-dia. mounting holes with

4.4-dia. countersinks on both sides *Material: Aluminum

E32-T25XB

Long-distance/High-power Models Indicates models that allow free cut ting.

Ult racompact/Thin-sleeve Models

Through-beam Fiber Units

Lens: 10 dia.

(PMMA)

Sensing head: M14 ×1* Two hexagonal nuts

Optical fiber: 2.2. dia.

*Material: ABS

19 23 42 10,000

E32-T17L

10±0.2

9.2

2.5

10.5

R3.5 Optical axis Two, 3.2 dia.

Heat-resistant

ABS

Lens (PMMA)

4.4 dia. Nitrile rubber

8.2

16 11.2 2

000

Optical fiber: 2.2 dia.

7.68

E32-T14

M2.6 × 0.45

1.4 dia.

Two hexagonal nuts

Two toothed washers

Sensing head: M4 × 0.7*

*Material: Brass/nickel

latin

Optical fiber: 2.2. dia.

3.2 3 11

(14) 2,0007

E32-T11L E32-T12L

1.4 dia.

2.4 dia. Sensing head: 3 dia.* Optical fiber: 2.2. dia.

(14) 2,000

*Material: Brass/nickel

latin

E32-T21L

2.5

0.9 dia.

5.5 11 1.8(1.7)

2,000

Two hexagonal nuts

Fiber Attachment (E39-F9)

Sensing head: M3 × 0.5*

Optical fiber: 1 dia.

Two toothed washers

*Material: Brass/nickel platin

E32-T22L

Fiber Attachment (E39-F9)

*Material: Stainless steel

(2)

0.9 dia. 1.8 dia.

Sensing head: 2 dia.*

1722 2,000

Optical fiber: 1 dia.

Heat-shrinkable

tube

25 (0.5

)

2,000

Sensing head*

0.5 dia.

Fiber Attachment (E39-F9)

Optical fiber: 1 dia.

1 dia.

*Material: Stainless steel

E32-T223R

Heat-shrinkable tube

0.25 dia.

3 dia.

0.5 dia.

10 1012 Optical fiber: 1 dia.

1,000

20 25

Sensing head*

*Material: Stainless steel

Fiber Attachment (E39-F9)

E32-T33-S5

Heat-shrinkable tube

0.125 dia. Optical fiber: 1 dia.

Sensing head*

*Material: Stainless steel

Fiber Attachment (E39-F9)

1,000 25

1012

105

3 dia.

0.25 dia.

E32-T333-S5

Note: The Fiber Attachment is attached with

adhesive and cannot be removed.

Heat-shrinkable tube

0.1 dia. Optical fiber: 1 dia.

Sensing head*

*Material: Stainless steel

Fiber Attachment (E39-F9)

1,000 25

1012

105

3 dia.

0.22 dia.

E32-T334-S5

Note: The Fiber Attachment is attached with

adhesive and cannot be removed.

Fine-beam (narrow vision field) Models

Heat-resistant Models

Area-sensing Models

Through-beam Fiber Units

3 dia.

1.7 dia.

Sensing head* Optical fiber: 2.2 dia.

2,000

*Material: Brass/nickel platin

E32-T22S

3.2 10 Mounting bracket (provided as accessory)

Optical fiber: 2.2 dia.Sensing head*

1.8

20.5

2 dia.

2Sensing surface

2,000

3.5 dia.

0.4

17.6 3.2

*Material: Brass/nickel plating

E32-T24S

Sensing

surface

(3 × 30)

Two, 3.2-dia. mounting holes

with 6-dia. countersinks

Optical fiber:

2.2 dia.

2,000

18.5

Optical axis

Sensing head*

*Material: ABS

E32-T16W

E32-T16WR

28 13

Sleeve

11 2,000

1.8

Sensing head:

M3 × 0.35 *2

Two hexagonal nuts

Two toothed washers

Silicon tube *1 Four, 1-dia.

plastic fibers

*1. One set of silicon tubes is

black and the other set is gray.

Use this difference to

distinguish between the

emission and reception sides.

*2. Material: Stainless steel

(SUS303)

E32-M21

E32-T16P

E32-T16PR

19 27

14.5

Two, 3.2 dia.

6-dia.

countersink 10.7

2,000

Sensing head*

Optical fiber: 2.2 dia.

20 Sensing

surface

(2 × 11)

Optical

axis

*1. Material: Heat-resistant ABS

*2. Provided with stickers with

slits of width 0.5 and 1 mm (2 of each).

E32-T16J

E32-T16JR

3.3

Sensing surface (2 × 11)

Receiver

Emitter

Sensing

surface

(2 × 11)

Sensing

head*

Optical

axis

14.5

10.7

Two, 3.2-dia.

holes with 6-dia.

countersinks

2000

Optical fiber:

2.2 dia.

*Material: ABS for the sensing head

and PMMA for the prism.

2,000

6 dia.

25 20

*1. Material: Heat-resistant ABS

*2. Provided with stickers with slits

of width 0.5 and 1 mm (2 of each).

Sensing head*1

Two, M3

Optical

axis

Lens

(2 × 10)

(PMMA)

8.4

Optical fiber: 2.2 dia.

15.5

8.85 3

E32-T16

2.4

2.85 dia.

1.5 dia.

17 2,000

Optical fiber: 2.2 dia.

Two hexagonal nuts

Two toothed washers

Sensing head: M4 × 0.7*

*Material: Brass/nickel plating

E32-T51

Note: The maximum allowable temperature is 150°C. The ma ximum al -

lowable temperature for continuous operation is 130°C.

E32-T54

Note: The maxi mum al lowa ble tem peratu re is 150°C. T he ma ximu m

allowable temperature for continuous operation is 130°C.

1.7

2 dia. 45°

2.5

Sensing surface

25 20

Sensing head: 3 dia.*

*Material: Stainless steel (SUS303)

Optical fiber: 2.2 dia.

2,000

Heat-resistant Models Indicates models that allow free cutting.

Chemical-resistant Models

Through-beam Fiber Units

0.7 dia.

32.4 4 dia.

10 2,000

13 *2

4 dia.

2 dia.3.6 dia. Fluororesin tube

Protective tube

Two hexagonal nuts

Two toothed washers

Sensing head:

M4 × 0.7 *1

M2.6 × 0.45

*1. Material: Stainless steel (SUS303)

Sleeve 2.2 dia.

(75) Note: The maximu m allowabl e temperatures for sec-

tions A and B are 200°C and 110°C, respective-

ly. The section inserted into the Amplifier Unit

(indicated by *2), however, must stay within the

Amplifier Unit's operating temp erature range.

E32-T81R-S

E32-T84S-S

Lens (2 dia.)

13 *2

12(14.2)

630 max.

3 dia.

2,000

Antislip tread

Sleeve

4 dia.

4 dia.3 dia.

3.5 dia.

Sensing head *1

90°

Flexible tube:

2.9 dia.

(stainless steel)

*1. Material: Stainless steel (SUS303)

2.2 dia.

Note: The maximum allowable temperatures

for sections A and B are 200°C and

110°C, respectively. The section inserted

into the Amplifier Unit (indicated by *2),

however, must stay with in the Amplifier

Unit's operating temperature range.

E32-T61-S

1 dia.

32.4 4 dia. *3

10 2,000 25

13 *2

4 dia. Sleeve

Flexible tube: 2.8 dia. (stainless steel)

Hexagonal caulking

Two hexagonal nuts

Two toothed washers

Sensing head:

M4 × 0.7 *1

M2.6 × 0.45

*1. Material: Stainless steel (SUS303)

*3. The diameter is 6 mm if the fiber

length exceeds 10 m.

2.2 dia.

Note: The maximum allowable temperatures for sections A and B are 200°C

and 110°C, respectively. The section inserted into the Amplifier Unit (in-

dicated by *2), however, must stay wi thin the Amplifier Unit's operating

temperature range.

7.2 dia.

Nut *1

Sensing head *1 Optical fiber: 2.2 dia. *2

Lens: 3 dia.

(10.7)

(35)

19.8 310 2,000

R3.6

*1. Material: PFA

*2. Sheath material: Fluororesin

E32-T11F E32-T12F

20 2,000

Sensing head: 5 dia. Fluororesin 4 dia. Optical fiber: 2.2 dia.

Lens: 4 dia.

100

(21)

Optical

axis

2,000

Sensing head: 5 dia. Fluororesin 4 dia. Optical fiber: 2.2 dia.

100

4.5

E32-T14F

100

(20) 2,000

Lens: 3.7 dia.

Optical fiber: 2.2 dia.

Fluororesin

Sensing head: 5 dia.

E32-T51F

3.7 dia. 30

(0.8) 2,000

(70)

255

4 dia. Sleeve 2.2 dia.

Protective tube PFA tube

2 dia.

PFA cover

(R6)

6 dia.

E32-T81F-S

Note: The maximum allowable temperatures for sec-

tions A an d B are 200°C and 110°C, respective-

ly. The section inserted into the Amplifier Unit

(indica ted by *2), how ever, must stay within the

Amplifier Unit's operating temperature range.

Vacuum-resistant Models

Through-beam Fiber Units

E32-T51V

M2.6 × 0.45 Two spring

washers 4 dia. Optical fiber: 3 dia. 4 dia.

Connected to flange

(vacuum side)

2.2 dia.

M4 × 0.7 * Two nuts

20 (30) 1,000 26

1.15 dia.

*Material: Aluminum

4.5

312

M2.6 × 0.45

1.15 dia.

3 dia. *

4 dia. 4 dia.

Connected to flange (vacuum side)

3 dia. 2.2 dia.5 dia.

(3)

(15) 1,000

*Material: Stainless steel (SUS304)

E32-T54V

(14.2)

Sensing head: 3 dia.*

Lens (2 dia.)

3 dia.

3.5 dia.

90°Flexible tube (stainless steel):

2.9 dia.

4 dia. 4 dia. 2.2 dia.

Connected to flange (vacuum side)

30 max.

12 1,000

*Material: Stainless steel

(

SUS304

)

E32-T84SV

8.9

0.5-dia. hole

6M2.6 × 0.45

Effective depth: 3.8

Spot-facing depth: 0.9

4 dia.

E39-F1V

36 dia. 49 70 dia.

44 dia.

45°

90 dia.

Four, 10 dia.

Flange

V40 O-ring Flange

E32-VF4

Note 1. Perform mounting so that the V15 O-ring is on the atmospheric-

pressure side of the vacuum chamber wall.

2. Mounting-hole cutout dimensions: 14.5 dia. ±0.2 mm

(96)

(63) 10 (23)

22519

6 (33.53)

30 20 dia.

One nut M14 × 2 Two, connectors

One spring

washer V15 O-ring

E32-VF1

Note 1. Perfor m mounting so tha t the V15 O-rin g is on the atm ospheric-pres-

sure side of the vacuu m cham be r wall .

2. Mounting-hole cutout dimensions: 14.5 dia. ±0.2 mm

Dimensions

Standard/Flexible Models Indicates models that allow free cutting.

Fiber Units with Reflective Sensors

4.8

Two, 1 dia.4 dia.

2.4317 2,000

Two hexagonal nuts

Two toothed washers

Sensing head*

M6 × 0.75 Optical fiber: Two, 2.2 dia.

*Material: AD

E32-DC200

E32-D11R

3.2

Two, 0.5 dia.

Two hexagonal nuts

Two toothed washers

Sensing head: M4 × 0.7*

Optical fiber: Two, 1 dia.

2.4315 2,000

10 25

Two Fiber Attachments (E39-F9)

*Material: Stainless steel (SUS303)

E32-D211

E32-D211R

Two, 0.5 dia.

2.5 5.5 11 1.8 2,000

*Material: Stainless steel

(

SUS304

)

Two Fiber Attachments (E39-F9)

Two hexagonal nuts

Two toothed washers

Sensing head: M3 × 0.5*

Optical fiber: Two, 1 dia.

E32-DC200E

E32-D21R

Two,

1 dia.

3 dia.

2,000

135

Heat-shrinkable tube Optical fiber: Two, 2.2 dia.

*Material: Stainless steel

(

SUS304

)

Sensing head*

E32-D12

E32-D12R

315 2,000

2.7 dia. Sensing head: 3 dia.* Optical fiber:

Two, 1 dia.

Two Fiber Attachments (E39-F9)

*Material: Brass/nickel platin

Two, 0.5 dia.

E32-D22

E32-D22R

Optical fiber: Two, 2.2 dia.

Sensing head*

Sensing surface:

Two, 1 dia.

Two, 2.2-dia. mounting

holes with 4.4-dia.

countersinks on both sides

*Material: Aluminum

2.5

7.5 5

2,00015

2.5

E32-D15X

E32-D15XR

Optical fiber: Two, 1 dia.

Sensing head*

Two Fiber Attachments (E39-F9)

Sensing surface:

Two, 0.5 dia.

Two, 2.2-dia. mounting

holes with 4.4-dia.

countersinks on both sides

*Material: Aluminum

2.5

1.5

5 4.5

2,000

E32-D25X

E32-D25XR

Two, 1 dia.

2.5 dia. max.

Two hexagonal nuts

Stainless-steel tube

(SUS304) Two toothed washers

Sensing head: M6 × 0.75

(fine thread) *2 Optical fiber: Two, 2.2 dia.

2,00017

2.4

5.2

10 90

(40)*1 *1. ( ): E32-DC200B4

*2. Material: Brass/nickel platin

E32-DC200B(B4)

E32-DC200BR(B4R)

Two, 0.5 dia.

2.5

5.5 11 90

(40)*1

1.8 2,000

Two Fiber Attachments (E39-F9)

Two hexagonal nuts

1.2 dia.

max.

Stainless-

steel tube

(SUS304)

Two toothed washers

Sensing head: M3 × 0.5 *2

Optical fiber: Two, 1 dia.

*1. ( ): E32-DC200F4

*2. Material: Stainless steel

(

SUS304

)

E32-DC200F(F4)

E32-DC200FR(F4R)

5.7

6 dia. 1.5

45°

Sensing surface

Light baffle

Optical fiber: Two, 2.2 dia.

Heat-shrinkable tubeSensing head*

3035 12 2,000

*Material: Stainless steel

(

SUS304

)

E32-D14L

E32-D14LR

35 15 1215

0.5 1.5

2,000

10 25

Two Fiber Attachments (E39-F9)

Heat-shrinkable tube Optical fiber:

Two, 1 dia.

Sensing head: 3 dia.*

Stainless-steel tube: 2 dia.

45°

Light baffle Sensing surface

*Material: Stainless steel (SUS304)

E32-D24

E32-D24R

Standard/Flexible Models

Break-resistant/Coated Models

Fiber Units with Reflective Sensors

Optical fiber: Two, 2.2 dia.

Two, 2.2-dia. mounting holes

with 4.4-dia. countersinks on both sides

Sensing surface Sensing head*

*Material: Aluminum

7.5 5

2,00015

2.5

2.8

2.4

2.5

E32-D15Y

E32-D15YR

Two Fiber Attachments (E39-F9)

Sensing surface Sensing head*

Optical fiber: Two, 1 dia.

Two, 2.2-dia. mounting

holes with 4.4-dia.

countersinks

*Material: Aluminum

1.5

2.5 54.5

12 2,000

1.42.3

E32-D25Y

E32-D25YR

Optical fiber: Two, 2.2 dia.

Two, 2.2-dia. mounting holes

with 4.4-dia. countersinks on both sides

Sensing surface

Sensing head*

*Material: Aluminum

7.5 5

2,00015

1.4

2.2

2.5

E32-D15Z

E32-D15ZR Sensing head*

Two Fiber Attachments (E39-F9)

Sensing surface Optical fiber: Two, 1 dia.

Two, 2.2-dia. mounting holes

with 4.4-dia. countersinks

*Material: Aluminum

2,000

54.5

12 25

20.9

1.2

2.5

E32-D25Z

E32-D25ZR

5.2

Two, sixteen,

0.265 dia. Sensing head:

M6 × 0.75*

Two hexagonal nuts

Two toothed washers

Protective tube Optical fiber: Two, 2.2 dia.

10 172.4 15 2,000

*Material: Brass/nickel plating

E32-D11

E32-D11U

3.2

Two, four, 0.25 dia.

Two hexagonal nuts

Two toothed washers

Sensing head: M4 × 0.7*

Optical fiber: Two, 1 dia.

2.4315 2,000

10 25

Two Fiber Attachments (E39-F9)

Material: Stainless steel (SUS303)

E32-D21B

5.5

Two Fiber Attachments (E39-F9)

2.5

Four, 0.25 dia.

Two hexagonal nuts

Two toothed washers

Protective tube Optical fiber:

Two, 1 dia.

151.8 11 2,000

Sensing head:

M3 × 0.5*

*Material: Brass/nickel plating

E32-D21

315 2,000

2.7 dia. Sensing head:

3 dia.* Optical fiber: Two, 1 dia.

Two Fiber Attachments (E39-F9)

*Material: Brass/nickel plating

Two, four,

0.25 dia.

E32-D221B

1.5 dia.

1002,000 15

Four, 0.25 dia. Sensing

head *1 Optical fiber:

1 dia. Brancher (ABS): 3 dia.

Attachmen

*1. Material: Stainless steel (SUS304)

Note: The Attachment is attached with adhesive

and cannot be removed.

E32-D22B

Optical fiber: Two, 2.2 dia.

Two, 2.2-dia. mounting holes

with 4.4-dia. countersinks on both sides

Sensing head*

Sensing surface:

Two, sixteen, 0.265 dia.

*Material: Aluminum

2.5

7.5 5

2,00015

2.5

E32-D15XB

Optical fiber: Two, 1 dia.

Two, 2.2-dia. mounting

holes with 4.4-dia. countersinks

Sensing head*

Two Fiber Attachments (E39-F9)

Sensing surface:

Two, four, 0.25 dia. *Material: Aluminum

2.5

1.5

54.5

2,000

E32-D25XB

Long-distance/High-power Models Indicates models that allow free cut ting.

Ult racompact/Thin-sleeve Models

Coaxial/Small-spot Models

Fiber Units with Reflective Sensors

Two, 3.2-dia.

mounting holes with

6-dia. countersinks

Optical

axis

Optical

axis

Two,

5.8-dia

lenses

8.5

922

17.5

11 6.5

Sensing head* Optical fiber:

Two, 2.2 dia.

2,000

*Material: Aluminum

E32-D16

5.2 3 2.4

20 2,000

Two, 1.4 dia. 4 dia.

Two hexagonal nuts

Two toothed washers

Sensing head: M6 × 0.75*

10 *Material: Brass/nickel platin

Optical fiber: Two, 2.2 dia.

E32-D11L

3.2

Two, 0.9 dia.

Two hexagonal nuts

Two toothed washers

Sensing head: M4 × 0.7*

Optical fiber: Two, 1 dia.

2.4315 2,000

10 25

Two Fiber Attachments (E39-F9)

*Material: Brass/nickel platin

E32-D21L

Two, 0.9 dia.

315 2,000

2.7 dia. Sensing head:

3 dia.* Optical fiber: Two, 1 dia.

Two Fiber Attachments (E39-F9)

*Material: Brass/nickel plating

E32-D22L

10 25

Stainless-steel tube: 0.8 dia.

Two, 0.25 dia. Sensing head: 3 dia.*

Heat-

shrinkable

tube Optical fiber:

Two, 1 dia.

35 2,000

15 12

Two Fiber Attachments (E39-F9)

*Material: Stainless steel (SUS303)

E32-D33

1515 1002,000 15

Two, 0.125 dia.

Stainless-steel tube: 0.5 dia.

Sensing head: 2 dia. *1 Brancher: 3.5 dia.

Attachment

*1. Material: Stainless steel (SUS303)

Note: The Attachment is attached with adhesive

and cannot be removed.

Irraxtube: 1.2 dia.

E32-D331

Note: There is a white line on the fiber that is inserted in the emitter-side port.

5.2

Emission fiber:

1 dia. 2.5 dia.

Two hexagonal nuts

Two toothed washers

Sensing head: M6 × 0.75* Optical fiber: Two 2.2 dia.

Sixteen, 0.25-dia.

reception

fibers

10 23

32.4 2,000

*Material: Brass/nickel plating

E32-CC200

E32-CC200R Emission fiber: 1 dia.

Sixteen, 0.265-dia.

reception fibers Sensing head: 3 dia.* Brancher (heat-resistant,

ABS, black): 6 dia. Optical fiber:

Two 2.2 dia.

15 400 15 1,570

2,000

*Material: Stainless steel

(

SUS304

)

Note: There is a yellow dotted line on the fiber that is inserted in the emitter-side

port.

E32-D32L

10 25

Two Fiber Attachments (E39-F9)

25 2,000

1220

Heat-shrinkable tube Optical fiber:

Two, 1 dia.

*Material: Brass/nickel

latin

2.5

Emission fiber:

0.5 dia.

Four,

0.25-dia.

reception

fibers

Two hexagonal nuts

Two toothed washers

Sensing head:

M3 × 0.5*

E32-C31

Note 1. There is a white line on the cable fiber that is inserted in the

emitter-side port.

2. The core diameter of the sensing head is assumed to lie in the

range 2.44 to 2.49 mm.

10 25

Two Fiber Attachments (E39-F9)

Emission fiber:

0.5 dia.

Four, 0.25-dia.

reception fibers 22 2,000

Heat-shrinkable

tube Optical fiber:

Two, 1 dia.

3 dia.

Sensing head:

2 dia.*

*Material: Stainless steel (SUS303)

Note: There is a white line on the cable fiber that is inserted in the emitter-side port.

E32-D32

17 1.8

22 1,000

Irraxtube: 2.6 dia.

Brancher

(ABS resin):

3.5 dia.

Optical fiber:

Two, 1.2 dia.

White markings:

Emission side

(heat-shrinkable tube)

Fiber

Attachmen

Two toothed

washers

Sensing head:

M3 × 0.5*

1 × 0.175 dia.

(emission fiber)

6 × 0.175 dia.

(reception fibers)

Two hexagonal

nuts

10 25(100) (5)

*Material: Stainless steel (SUS303)

E32-C41

Note: The Fi ber Attachmen t is attached with ad-

hesive and cannot be removed.

*Material: Stainless steel

(

SUS303

)

Two Fiber Attachment

1 × 0.175 dia.

(emission fiber)

6 × 0.175 dia.

(reception fibers) 2

Irraxtube: 2.6 dia. Optical fiber:

Two, 1.2 dia.

Brancher

(ABS resin)

White markings:

Emission side

(heat-shrinkable tube)

3 dia.

Sensing head: 2 dia.*

1,000

15 10 25(100) (5)

E32-C42

Note: The Fiber Attachm ent is attach ed with ad-

hesive and cannot be removed.

Area-sensing Models

Retroreflective Fiber Units

Limited-reflective Models

Fiber Units with Reflective Sensors

Two, 3.2-dia. mounting holes

2,000

10.85

Sensin

head*

32 × 0.265 dia.

(emission and reception fibers in alternating arrangement

)

Optical fiber:

Two, 2.2 dia.

*Material: Brass/nickel plating

E32-D36P1

E32-R21

(An E39-R3 Reflector is provided as an accessory.)

10 25

Two Fiber Attachment

Optical fiber:

Two, 1 dia.

Silicon tube

Two hexagonal nuts

Two washers

Sensing head*

Lens

(PMMA) M6 × 0.75

27.8

17.8

2.8 11314 2,000

5 dia.

2.2

*Material: ABS

15.2

Lens (PMMA)

7.2

21.5

27 15

16 4 Sensing head *1

Optical fiber: Two, 2.2 dia.

Standard length: 2 m

Two, M3 set screws (provided)

*1. Material: ABS

(6)

E32-R16

(An E39-R1 Reflector is provided as an acce ssory.)

3.5 7

113.5

2.5 1

2.5

10 25

2,000

Two, 3.2-dia. mounting holes

with 6-dia. countersinks

on both sides

3.6 dia.

Optical fiber: Two, 1 dia.

Optical axis

Two Fiber Attachments (E39-F9)

2.2 dia.

*Material: ABS

Sensing head*

E32-L24S

Optical fiber: Two, 2.2 dia.

Two, 3.2-dia. mounting holes with 6-dia.

countersinks on both sides

Optical axis

22.5

17.5

4.5

3.8

0.75

1.7

2,000

12.3

Sensing head* *Material: ABS

E32-L16

10 25

Two Fiber Attachments (E39-F9)

18 Side-view prism (PC)

Two, 3.2-dia. lenses

Optical fiber: Two, 1 dia.

2,000

3.3

3.6 4

3.3 1.5

Optical

axis

Sensing distance

20 6.5

Sensing head*

*Material: Polycarbonate

Two, 3.2-dia. mounting holes

with 6-dia. countersinks on both sides

E32-L24L E32-L25L

10 25

Two Fiber Attachments (E39-F9)

18 Sensing distance

Two, 3.2-dia. lenses

Optical fiber: Two, 1 dia.

2,000

16 6.5

Sensing head*

Two, 3.2-dia. mounting holes

with 6-dia. countersinks on both sides *Material: Polycarbonat

Optical fiber: Two, 2.2 dia.

2,000

6.5

4.8

6.5

Sensing head*

Two, 3.2-dia. holes with

6-dia. countersinks

4Sensing distance

*Material: Heat-resistant ABS

E32-L25

Note: There is a white line on t he fiber th at is inse rted in the emitter-sid e

port.

E32-L25A

2,000

6.5

Sensing distance

4.8

6.5

Sensing head*

Optical fiber:

Two, 2.2 dia.

104

Two, 3.2-dia. holes

with 6-dia. countersinks

*Material: Heat-resistant ABS

Note: There is a white line

on the fiber that is in-

serted in the emitter-

side port.

Limited-reflective Models Indicates models that allow free cutting.

Heat-resistant Models

Chemical-resistant Models

Fiber Units with Reflective Sensors

Two, 4 dia.

Optical axis

Sensing head (stainless steel)

Two, 3.2-dia. holes with 6-dia. countersinks on one side

Flexible tube: 2.8 dia.*

5.5

33.5

19 7

11 13

5 (max.)

2,000

4 dia.

8.9 18

*Material: Stainless steel

E32-L86 Note: The maximum allowable temperatures

for sections A and B are 200°C and

110°C, respectively. The section insert-

ed into the Amplifier Unit (indicated by

*2), however , must stay wi thin the Am-

plifier Unit's operating temperature

range.

Two, 1.5 dia.

3.1

4.9

Two hexagonal nuts

Two toothed washers

Sensing head: M6 × 0.75* Optical fiber: Two, 2.2 dia.

2.413317 2,000

*Material: Brass/nickel platin

E32-D51

Note : The m aximum allo wable tempera ture is 150 °C. The maximum

allowable temperature for continuous operation is 130°C.

5 dia. 2.2 dia. Sleeve

SUS flexible tube

11.5

510 *2

4.5

8.5

SUS303

Fiber: 1.2 dia. Sleeve

M4 × 0.7

2.2 dia.

Sensing head: M6 × 0.75 *1

6.4

5 dia.

815

13 *220 56.5

16.5 B

(70)

(4.2 dia.)

2,000

Two toothed washers (SUS)

Two hexagonal nuts (SUS)

*1. Material: Stainless steel (SUS303)

Protective tube (gray)

E32-D81R-S

E32-D81R Note: The maximum allowable temperatu res

for sections A and B are 200°C and

110°C, respectively. The section insert-

ed into the Amplifier Unit (indicated by

*2), however, must stay within the Am-

plifier Unit's operating temperature

range.

Using the E32- D81R-S Using the E32-D81R

20 5 *4

32,000

5 dia. 2.2 dia. Sleeve

5 dia. *3 3.5 dia.

SUS flexible tube

Two hexagonal nuts

Two toothed washers

Sensing head: M6 × 0.75 *1

1.4 dia. M4 × 0.7

11.5

510 *2

4.5

8.5

322.4

*1. Material: Stainless steel (SUS303)

*3. The diameter is 6 if the fiber length exceeds 10 m.

*4. The diameter is 10 if the fiber len

th exceeds 10 m.

Sleeve

5 dia.

Hexagonal

caulking SUS316L

16.5 6.5

5 *2

6.4

E32-D61-S

E32-D61 Not e: The maximum allowable temperatures

for sections A and B are 350°C and

110°C, respectively. The section insert-

ed into the Amplifier Unit (indicated by

*2), however, must stay within the Am-

plifier Unit's operating temperature

range.

Using the E32 -D61-S Using the E32-D61

60 20 10 2,000 16.5 *2

AB C

2.4 56.5 6.4

Sleeve

5 dia.

4 dia. 2.8 dia.

Hexagonal caulking SUS316L

SUS flexible tube

Two toothed washers

Two hexagonal nuts

Sensing head: M4 × 0.7 *1

2.5 dia.

1.65 dia.

Stainless-steel tube:

1.25 dia.

1 dia.

*1. Material: Stainless steel (SUS303)

5 dia. 2.2 dia. Sleeve

11.5

510 *2

4.5

8.5

E32-D73-S

E32-D73 Not e: The maximum allowable temperatures

for sections A, B, and C are 400°C,

300°C, and 110°C, respectively. The

section inserted into the Am plifier Unit

(indicated by *2), however, must stay

within the Amplifier Unit's operating

temperature range.

Using the E32 -D73-S Using the E32-D73

2,000

16 100

Sensing head: 6 dia. Fluororesin 5 dia. Optical fiber: Two, 2.2 dia.

E32-D12F

100

2,000

4.5 (26) Fluororesin tube

(protective cover)

Optical-axis mark

Optical

axis Sensing head: 7 dia. Optical fiber: 2.2 dia.

E32-D14F

Dimensions

Label-detection Models

Liquid-level Detection Models

Application-specific Fiber Units

1.6423.5 9.4 1.6

9.2

R3.5

Lens

(PMMA)

10 Optical axis

Sensing head*

25.2 36.3 2,000

R1.6 R1.6

3.2 9

7.6

8.4 8

Optical fiber:

Two, 2.2 dia.

*Material: ABS

E32-G14

Sensing head

Thirty-two,

0.265 dia.*

Optical fiber: Two, 2.2 dia.

Reception side: Sixteen, 0.265 dia.

Emission side: Sixteen, 0.265 dia.

2,000

13.25

4.4

Eight, R0.5

R10 (100)

11.4

23.45

20.4

E32-D36T

Sensing head (PC)

Mounting hole

15.2

(13)

1.2

2.8

18 2,000

Two Fiber Attachments (E39-F9)

Optical fiber: Two, 1 dia.

Two, 3.2-dia. lenses (PC)

E32-L25T

Sensing surface (2 × 11) Optical axis

Sensing head*

Emitter

Receiver

Tube holder 20

4.2

19.9

5,000

*Material: ABS for the sensing head,

PMMA for the prism,

and PBT for the pipe holder.

E32-A01

Sensing surface (2 × 11)

Sensing head*

Tube holder 27

4.5

14.5

3.3

4.5

1.7

*Material: ABS for the sensing head,

PMMA for the prism,

and PBT for the pipe holder.

5,000

Optical axis

E32-A02

2,000

7.2

Sensing head (fluororesin): 6 dia. Fiber connector (brass/nickel plating): 9 dia.

8 dia. Optical fiber: Two, 2.2 dia. *2

To the Amplifier Unit

Length of unbendable

section: 150 (350) *1 2,000

27 42

*1. ( ): E32-D82F2

*2. The 2-m section of optical fiber on the Amplifier-unit side is plastic and therefore allows free cutting.

E32-D82F1

E32-D82F2

Models for Glass-substrate Alignment/Mapping Indicates models that allow free cutting.

Wafer-mapping Models

Application-specific Fiber Units

6.510.7

3.8 24.5

1.1

2,000

Optical axis Two, 3.24-dia. mounting holes

with 6-dia. countersinks Emission fiber: 2.2 dia.

Reception fiber: 2.2 dia.

1214

E32-A08

E32-A07E1(E2)

Two, 2.8-dia. flexible tubes

(

stainless steel

)

4 dia.

5.5

2.2 dia.

Two, 3.2-dia. mounting holes

with 6-dia. countersinks

Sensing head *1 *1. Material: Stainless steel (SUS303)

1121.7 AB

513 *2

2,000

E32-L66

Note: The maximum allowable temperatures for sections A and B are

300°C and 110°C, respectively. The section inserted into the Am-

plifier Unit (indicated by *2), however, must stay within the Amp li-

fier Unit's operating temperature range.

Sensing head* *Material: Aluminum

2,000

Optical fiber: Two, 2.2 dia.

Lens:

5.8 dia.

Optical axis

Two, 3.2-dia. mounting holes

with 6-dia. countersinks

8.9

E32-A09

E32-A09H B

712 30 A

2,000 2813

Sensing head *1

2.8-dia. flexible tubes*

Two, 3.24-dia. mounting holes

with 6-dia. countersinks

Lens: 5.8 dia.

Optical

axis

5 dia. 4 dia.

2.2 dia.

248.9

*1. Material: Stainless steel

E32-A09H2

Note: The maximum allowable temperatures for sections A and B

are 300°C and 110°C, respectively. The section inserted into

the Amplifier Unit (indicated by *2), however, must stay within

the Amplifier Unit's operating temperature range.

E39-L83 Mounting Bracket (SUS)

Sensing surface

2 dia.

20.5 2,000

Fiber Attachment (E39-F9)

Sensing head *1

Stamp (1-mm dia.)

*Material: Brass/nickel plating

3 dia.

0.4

1.8

3.2

17.6

3.2

Two, R1.6

R1.6

3.4

4.3

E32-A03

Note: Use the stamped surface and its opposing surface as installation (refer-

ence) surfaces.

13 12.53

18.5

6.5

2,000

24.5

10 25

Two, 3.4 dia.

Engraved mark: 1 dia.

Optical fiber: 1 dia.

Fiber Attachment (E39-F9)

2 dia.

Sensing

surface Sensing head *

3 dia.

4.5 10 3.5

*Material: Brass/nickel platin

E32-A03-1

Note: Use the stamped surface and its opposing surface as installation (refer-

ence) surfaces.

420.5 2,000 25

Four, R1.35 Stamp

(1-mm dia.)

2 dia.

2 dia. Fiber Attachment

(E39-F9)

Sensing head *

Optical fiber: 1 dia.

1.2 dia.

*Material: Stainless steel (SUS303)

Sensin

surface

E32-A04

Note: Use the stamped surface and its opposing surface as installation (refer-

ence) surfaces.

1.2 dia.

3.5

2,000

1.2

Sensing head *

Two, M2

Installation

(reference)

surface

Sensin

surface

2.5

2 dia.

Optical

axis

Fiber Attachment (E39-F9)

Optical fiber: 1 dia.

*Material: Stainless steel (SUS303)

E32-A04-1

Lens Units

Accessories

Lens Units

E39-F1

Material:

Brass for the body and opt ical glass for the lens itself.

Note: Two per set.

4 dia.

8.9

M2.6 × 0.45

Effective depth: 3.8

Spot-facing depth: 0.9

Side-view Units

E39-F2

Material:

Brass for the body and opt i cal glass for the lens itself.

Note: Two per set.

4 dia.

2.8 dia.

9.2

5.7

M2.6

Effective depth: 3.2

Spot-facing depth: 0.9

8.5

3.6

8±

0.2

6.56.4 M3 × 6 angle-setting

screw

6.4

Two, 3.2 dia.

M3 internally

toothed washer

Two, 4 dia. Two, M3 × 3

slotted-head set screws*

20.7

Reflection Unit with Lens

E39-F3

Material:

Brass for the body

and aluminum f or

the base .

*Secure the fiber head with the slotted-head set screws. Do not insert a lens

(E39-F1).

Lens Unit for Reflective Fiber Units

E39-F3A

Note: This is the Lens Unit for the E32-D32 and E32-

C42.

Material:

Aluminum for body and

optical glass for lens.

23 13 3

M2 × 2 Allen-head set screw

(for securing the fiber)

2.1 dia.

6 dia. 4 dia.

Lens surface

(lens diameter: 3.7 mm)

Lens Unit for Reflective Fiber Units

E39-F3A-5

Material:

Aluminum for bod y and optical

glass for lens Note: T his is th e Lens Un it for the

E32-C31 and E32-C41.

6.5

16.5

Lens surface

(

lens diameter: 3.7 mm

)

Straight knurling

5 dia.

4 dia.

2.1 dia.

M3 × 0.5 Effective screw length: 3

Lens Unit for Reflective Fiber Units

E39-F3B

Material:

Aluminum for body and

optic al glass for lens.

Note: This is the Lens Unit for the

E32-C31 and E32-C41.

25.2

Lens surface

(lens diameter: 4.8 mm) M3 × 0.5 Depth: 4.4

24.1

5.5 dia.

6 dia.

Lens Unit for Reflective Fiber Units

E39-F3C

Material:

Aluminum for body and

optical glass for lens.

Note: This is the Lens Unit for the

E32-C31 and E32- C41 .

Straight knurling

Lens surface

(lens diameter: 3.7 mm)

M3 × 0.5 Effective screw length: 3

10.9

5.8

4.3 dia. 5 dia.

Protective Spiral Tubes

Other Accessories

Accessories

E39-F32A/F32A5

E39-F32B/F32B5

6 dia.

12 L12

3 dia.

End cap *1

Tube *2 *1. Material: Brass/nickel plating

*2. Material: Stainless steel (SUS304)

(4.6 dia.)Head connector *1M3 × 0.5; depth: 4

Note 1. The length L is 1,000 for the E39-F32A/-F32B and 500 for the E39-F32A5/-F32B5.

2. The E39-F32B(5) consists of two E39-F32A(5)s.

E39-F32C/F32C5

7 dia.

L12

End cap *1 4 dia.(5.6 dia.)Head connector *1M4 × 0.7; depth: 4

Tube *2 *1. Material: Brass/nickel plating

*2. Material: Stainless steel

(

SUS304

)

Note: The length L is 1,000 for the E39-F32C and 500 for the E39-F32C5.

E39-F32D/F32D5

8.5 dia.

L12

5 dia.

End cap *1(7 dia.)Head connector *1M6 × 0.75; depth: 4

Tube *2 *1. Material: Brass/nickel plating

*2. Material: Stainless steel (SUS304)

Note: The length L is 1,000 for the E39-F32D and 500 for the E39-F32D5.

Fiber Cutter

E39-F4 845

Standard-fiber insertion hole Thin-fiber insertion hole

24.5

Thin-fiber Attachments

E39-F9

1.1 dia. Mark indicating position of insertion

into Amplifier Unit

3.6 dia. 25

10 11.7

(2.2 dia.)

Material: AB S

Note: Two per set.

*Provided with thin-f iber models.

Fiber Connector

E39-F10 3.8 dia. 3 dia.

26 12.8

Fiber: 2.2 dia.Fiber: 2.2 dia. Splice *1 Retention

clip *2

Retention

clip *2

*1. Material: Polyester

*2. Material: Brass

32.6

(48.6)

Four, 0.8

29.6

20.422.4

3.2

7.6

9.2

Four, R0.8

Note: Dimension A varies with the model

number as shown in the following table.

Dimension AModel

Four, 6 dia. E39-F13

E39-F14 2.4

1.2

E39-F15 2.4/1.2

Four, A

(See note.)

27.4

33.8

Fiber Connector

E39-F13

E39-F14

E39-F15

Sleeve Bender

E39-F11

10.8

42.5

10 10 R5

R7.5

R12.5 R10

Precautions

■ Fibe r Units

Mounting

Tightening Force

The tighten ing force ap plied to the Fi ber Unit sh ould be as fo l-

lows:

Use a proper-sized wrench.

Fiber Cutting Procedure

Cut a thin fiber as follows:

Note: Insert the fiber in the direction indicated by the arrow.

Connection

• Do not pull or pre ss the F ibe r Units . The Fib er U nit s ha ve a

withstand force of 9.8 N or 29.4 N maximum.

• Do not bend t he F ibe r U nit bey on d th e permissibl e b ending

radius given under Or deri ng Info rma tio n .

• Do not bend the edge of the Fiber Units

(excludi ng the E32-T @R and E32-D@R).

• Do not apply excess force on the Fiber Units.

The Fiber Head could be broken by excessive vibration. To

prevent this, the following is effective:

Precautions for Correct Use

Screw-mounting Model Cylindrical Model

Fiber Units Clamping torque

M6 screw/

6-mm dia. cy lin d er 0.98 N·m max.

M3/M4 scr ew 0.78 N·m m ax.

2-mm dia./3-mm dia.

cylinder 0.29 N·m max.

1.5-mm dia./1-mm dia.

cylinder 0. 2 N · m ma x.

E32-T12F 5-mm dia.

fluororesi n model 0.78 N·m max.E32-D12F 6-mm dia.

fluororesi n model

E32-L25A

E32-M21 Up to 5 mm to the tip: 0.49 N·m max.

More than 5 m m f rom t he tip:

0.78 N·m max.

E32-T16 0.49 N·m max.

E32-R21 0.3 9 N·m max.

E32-T16W(R)

E32-T16P(R)

E32-T16J(R)

E32-L24S

E32-L24L

E32-T25L

0.29 N·m max.

Toothed washers

Spring mounting clip

Nuts

(

attachment

)

Retaining screw

(flat head or sunken head)

(M3 max.)

An attachment is

temporarily fitted to

a thin fiber before

shipment.

Secure the attach-

ment a ft er a d jus ti ng

the posit io n of it in

the direct ion indicat-

ed by the arro w .

Insert the fiber to be

cut into the E3 9- F4.

Finished s ta te

(proper cutting

state)

Thin fiber attachment

(E39-F9)

Temporarily fitted

Cutter

(E39-F4)

Two holes for

thin fiber

Three holes for

standard fiber

(2.2-mm dia.)

Approx.

0.5 mm

Insertion direction

Amplifier Unit Fiber Unit

20 mm min.

Correct Incorrect

Fiber Unit

Nylon wireholder

Correct Incorrect

A one-turn loop can

absorb vibrations.

E39-F11 Sleeve Bender

• The bendin g radi us of the sta in les s st eel tube should be as

large as po ssible. The sm aller the bendi ng radius becomes ,

the shorter the sensing distance will be.

• Insert the tip of the stain-

less steel tube to the

Sleeve Bender and bend

the stainless steel tube

slowly along the curve of

the Sleeve Bender (refer

to the figure).

Heat-resistant Fiber Units (E32-D51 and E32-T51)

• The fibers of these Units cannot be extended using the E39-

F10 Fiber Connector.

• The maximum allowable temperature for continuous opera-

tion with these Units is 130°C. It is 150°C for short-term use.

E32- T14 and E32-G14

These Units may enter the light-ON

state if there are reflecting objects at

the ends of the lenses. In this case,

attach the black stickers provided to

the ends of the lenses.

Wafer Sensors (E32-L25(A))

• To ensure co rrec t pe rform an ce, ins ert t he f ibe r with a w hi te

line into the emitter-side port of the Amplifier Unit.

E32-T16 and E32-T16P To use the sl it provided, pe el off the

backing sh eet, ali gn it w ith the ed g-

es of the sensing surface, and at-

tach it t o the s ensin g head . Use th e

slit in applications where saturation

occurs (i.e., changes in light inten-

sity cannot be obtained) due to

short se nsi ng dis tan ces.

E32-M21

Separate the 4 fibers by distances sufficient to prevent inter-

ference.

Vacuum-resistant Fiber Units (E32-V)

Although Flanges, Fiber Units on the vacuum side, and Lens

Units ha ve been cl eaned , as an extra pre cautio n, clean these

products with alcohol before use in high-vacuum environ-

ments to ensure that they are properly degreased.

Liquid-level Detection Sensors (E32-D82F)

• Secure the Fiber Unit u si ng the unb endable sec tio n. O th er-

wise, the liquid-level detection position may be displaced.

• For applications in hazardous environments, install the Fi-

ber Unit in the ha zardou s env ironme nt but in stall the Ampl i-

fier Unit in a safe environment.

Liquid-level Detection Sensors: Tube-mounting Models

• Ensure that the tube is not deformed when using a band to

secure the Fiber Unit.

• Drops of water, bubbles, or ha ze inside th e tube may cause

malfunctions.

● Adjustment

E32-G14

The sensin g dis tan ce is short, making the inc ide nt li ght inten -

sity large. This makes it impossible to teach without a work-

piece. Perform teaching with and without a workpiece.

Liquid-level (E32-D82F) Detection Position

The liquid-level detection po-

sition is at a distance of

5.2±2 mm from the end of the

fluororesin section.

(Refer to the diagram on the

right.)

The liquid-level detection po-

sition varies with the surface

tension of the liquid and the degree of wetness at the Fiber

Unit's detection position.

● Other Considerations

Liquid Level (E32-D82F)

• Operation may become unstable in the following cases:

A Bubbles stick to the cone of the sensing head.

B Solute is deposited on the cone of the sensing head.

C The liquid has a high viscosity.

• There are some liquids, such as milky white liquids, for

which detection is not possible.

• Do not let the end of the fluororesin section bump into an-

other object. Damage to, or deformation of, the sensing

head may result in unstable operation.

Heat-resistant Fiber Units (E32-D81R, E32-D61, and E32-

D73)

The pitch of the emission-side and reception-side fiber-inser-

tion ports varies with th e Am pli fie r U ni t. Be sur e to us e an ap-

propriate Fiber Unit.

1.2 mm dia. max.

R12.5 mm

R7.5 mm

1.3 mm dia. min. R10 mm

Fiber tip

position

mark

Stainless

steel tube

R5 mm

90° max.

10 mm

Do not bend here.

Stickers

Slit provided

E32-T16's sensing head

Example

Amplifier Unit Fiber Un i t

E3X-DA@-S

E3X-MDA@E32-D@-S

E3X-DA@-N

E3X-NA@E32-D@

Liquid-level detection

position

5.2±2 mm (from the end of the

fluororesin section)

■ Accessories

Use of E39-R3 Reflector

1. Use detergen t, etc., to remove any du st or oil from the sur-

faces where tape is applied. Adhesive tape will not be at-

tached properly if oil or dust remains on the surface.

2. The E39-R 3 cannot be used in place s where it is expo sed

to oil or chemicals.

E39-F32@ Protective Spiral Tubes

1. Insert a fiber to the Protective

Spiral Tu be from the hea d con-

nector side (screwed) of the

tube.

2. Push the fiber into the Protec-

tive Spiral Tube. The tube

should be st raight so that the f i-

ber is not twisted when insert-

ed. Then turn the end cap of

the spiral tube.

3. Secure the Protective Spi-

ral Tube on a suitable

place with the attached

nut.

4. Use the attached saddle to se-

cure the end cap of the Protec-

tive Spiral Tube. To sec ure the

Protective Spiral Tube at a po-

sition other than the end cap,

apply tape to the tube so that

the portion becomes thicker in

diameter.

E39-F10 Fiber Connector

Mount the Fiber Connector as shown in the following illustra-

tions.

• The Fiber Units should be as close as possible when they

are conne cte d.

Sensing distance will be reduced by approximately 25%

when fibers are connected.

• Only 2.2-mm dia. fibers can be connected.

Protective Spiral

Tube Fiber Unit

Protective Spiral

Tube Fiber Unit

Protective Spiral

Tube Toothed washer

Fiber Unit

Hexagon clamping nut

Mounting panel

End cap

Tube

Saddle

Retention unit

Fiber Unit Splice

Retention

unit

Fiber Unit Fiber Unit

Fiber Unit

MEMO

READ AND UNDERSTAND THIS DOCUMENT

Please read and understand this doc ument before using the pro ducts. Please consult your O MRON repres entative if you have any quest ions or

comments.

WARRANTY

OMRON’s exclusive warranty is that the prod ucts are free from defects in mater ials and workmansh ip for a period of one year (or other period if

specified) from date of sale by OMRON.

OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT,

MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT

THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR

INTENDED USE. OMRON DISCLAIMS ALL OT HER WARRANTIES, EXPRESS OR IMPLIED.

LIMITATIONS OF LIABILITY

OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR

COMMERCIAL LOSS IN ANY W AY CO NNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, W ARRANTY,

NEGLIGENCE, OR STRICT LIABILITY.

In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.

IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS

OMRON’S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND

NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.

SUITABILITY FOR USE

THE PRODUCTS CONTAINED IN THIS DOCUME NT ARE NOT SAFETY RAT ED. THEY ARE NOT DESIGNED OR RATED F OR ENSURING

SAFETY OF PERSONS, AND SHOULD NOT BE RELIED UPON AS A SAFETY COMPONENT OR PROTECTIVE DEVICE FOR SUCH

PURPOSES. Please refer to separate catalogs for OMRON's safety rated products.

OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the

customer’s application or use of the product.

At the customer’s request, OMRON will prov ide applicable third party cer tification documents identifying ratings and limitations of use that apply

to the products. This information by itself is not sufficient for a complete determination of the suitability of t he products in combination with the end

product, machine, system, or other application or use.

The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all

possible uses of the products, nor is it intended to imply that the uses listed may be suit able for the product s :

• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document.

• Nuclear energy control systems, combustion systems, rai lroad systems, aviation systems, medical equipment, amusement machines, vehicles,

safety equipment, and installations subject to separate industry or government regulations.

• Syst ems , mach ines, and equipment that could present a risk to life or property.

Please know and observe all prohibitions of use applicable to the products.

NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT

THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED

AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

PERFORMANCE DATA

Performance data given in this docu ment is provided as a guide for t he user in determining suitability and does not co nstitute a warranty. It may

represent the result of OMRON’s test conditions, and the users must correlat e it to actual application requi rements. Actual perfor ma nc e i s s u bj e ct

to the OMRON Warranty and Limitations of Liability.

CHANGE IN SPECIFICATIONS

Product specifications and accessories may be changed at any time based on improvements and other reasons.

It is our practice to change m odel num bers when published ratings or features are changed, or when significant construction changes are m ade.

However, some specifications of t he produc t may be changed without any notice. When in dou bt, spec ial model num bers may be assigned to fix

or establish key specifications for your application on your request . Please consult with your OMRON representative at any time to confirm act ual

specifications of purchased products.

DIMENSIONS AND WEIGHTS

Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.

ERRORS AND OMISSIONS

The information in th is document ha s been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,

typographical, or proofreading errors, or omissions.

PROGRAMMABLE PRODUCTS

OMRON shall not be responsible for the user’s programming of a programmable product, or any consequence thereof.

This document shall not be copied for sales or promotions without permission.

This document is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or

reproducing this document in any manner, for any other purpose. If copying or transmitting this document to another, please copy or transmit it in

its entirety.

A host of remarkable functions inside a compact body.

A complete lineup of sensor heads to

handle an even wider range of applications.

This is the platform for OMRON’s sensing technology.

High-resolution sensing using laser

and magnetic technology.

Linear Platform

Smart Monitor

A common platform for Fiber Sensors

and Sensors with Separate Amplifiers.

ON/OFF Platform

Mobile Console

Laser-type Smart Sensors

ZX-L Series Inductive Displacement

Smart Sensors

ZX-E Series

A lineup of Smart Sensors that use the eddy

current method.

An improved lineup for smarter sensing.

Refinement and a new generation that goes

beyond superior performance. Photoelectric Sensors with Separate Digital

Amplifiers have joined the Smart Sensor family.

Digital Fiber Sensors

E3X-DA-S Series/MDA Series

Laser-type Photoelectric Sensors

with Separate Digital Amplifiers

E3C-LDA Series

Authorized Distributor:

Note: Specifications subject to change without notice.

Regional Headquarters

Cat. No. E353-E1-03

1205

OMRON Corporation

Industrial Automation Company

Sensing Devices Division H.Q.

Industrial Sensors Division

Shiokoji Horikawa, Shimogyo-ku,

Kyoto, 600-8530 Japan

Tel: (81)75-344-7022/Fax: (81)75-344-7107

This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the user

must understand and accept before purchase, including information on warranty, limitations of liability, and precautions.

OMRON EUROPE B.V.

Sensor Business Unit,

Carl-Benz-Str. 4 D-71154 Nufringen,

Germany

Tel: (49)7032-811-0/Fax: (49)7032-811-199

OMRON ELECTRONICS LLC

1 East Commerce Drive, Shaumburg,

IL 60173 U.S.A.

Tel: (1)847-843-7900/Fax: (1)847-843-8568

OMRON ASIA PACIFIC PTE. LTD.

83 Clemenceau Avenue,

#11-01, UE Square,

239920 Singapore

Tel: (65)6835-3011/Fax: (65)6835-2711

OMRON CHINA CO., LTD.

Room 2211, Bank of China Tower,

200 Yin Cheng Road (M)

Shanghai, 200120 China

Tel: (86)21-5037-2222/Fax: (86)21-5037-2200

Note: Do not use this document to operate the Unit.

Terms and Conditions of Sale

1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed

par t of all quotes, agreements, purchase orders, acknowledgments, price lists,

catalogs, manuals, brochures and other documents, whether electronic or in

writing, relating to the sale of products or services (collectively, the "Products")

by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron

objects to any terms or conditions proposed in Buyer’s purchase order or other

documents which are inconsistent with, or in addition to, these Terms.

2. Prices; Payment Terms. All prices stated are current, subject to change with-

out notice by Omron. Omron reserves the ri ght to increase or decrease pr ices

on any unshipped portions of outstanding orders. Payments for Products are

due net 30 days unless otherwise stated in the invoice.

3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices

sent to Buyer after deducting tr ansportation charges, tax es and duties, and will

be allowed only if (i) the invoice is paid according to Omron’s payment terms

and (ii) Buyer has no past due amounts.

4. Interest. Omron, at its option, may charge Buyer 1- 1/2% interest per month or

the maximum legal rate, whichever is less, on any balance not paid within the

stated terms.

5. Orders. Omron will accept no order less than $200 net billing.

6. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approval s required for the impor-

tation or sale of the P roducts.

7. Taxes. All taxes, duties and other governmental charges (other than general

real property and income taxes), including any interest or penalties thereon,

imposed directly or indirectly on Omron or required to be collected directly or

indirectly by Omron for the manufacture, production, sale, delivery, importa-

tion, consumption or use of the Products sold hereunder (including customs

duties and sales, excise, use, tur nover and license taxes) shall be charged to

and remitted by Buyer to Omron.

8. Financial. If the financial position of Buyer at any time becomes unsatisfactory

to Omron, Omron reserves the right to s top s hipments or require satisfactor y

security or payment in advance. If Buyer fails to make payment or otherwise

comply with these Terms or any related agreement, Omron may (without liabil-

ity and in addition to other remedies) cancel any unshipped portion of Prod-

ucts sold hereunder and stop any Products in transit until Buyer pays all

amounts, including amounts payable hereunder, whether or not then due,

which are owing to it by Buyer. Buyer shall in any event remain liable for all

unpaid accounts.

9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation

unless Buyer indemnifies Omron against all related costs or expenses.

10. Force Majeure. Omron shall not be liable for any delay or failure in delivery

resulting from causes beyond its control, including ear thquakes, fires, floods,

strikes or other labor disputes, shortage of labor or materials, accidents to

machinery, acts of sabotage, riots, delay in or lack of transportation or the

requirements of any government authority.

11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:

a.Shipments shall be by a carrier selected by Om ron; Omron will not drop ship

except in “break down” situations.

b.Such carrier shall act as the agent of Buyer and delivery to such carrier shall

constitute delivery to Buyer;

c.All sales and shipments of Products shall be FOB shipping poi nt (unless oth-

erwise stated in writing by Omron), at which point title and risk of loss shall

pass from Omron to Buyer; provided that Omron shall retain a security inter-

est in the Products until the full purchase price is paid;

d.Delivery and shipping dates are estimates only; and

e.Omron will package Products as it deems proper for protection against nor-

mal handling and extra charges apply to special conditions.

12. Claims. Any claim by Buyer against Omron for shortage or damage to the

Products occurring before delivery to the carrier must be presented in writing

to Omron within 30 days of receipt of shipment and include the original trans-

portation bill signed by the carrier noting that the carrier received the Products

from Omron in the condition claimed.

13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the

Products will be free from defects in materials and workmanship for a period of

twelve months from the date of sale by Omron (or such other period expressed

in writing by Omron). Omron disclaims all other warranties, express or implied.

(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,

EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-

ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.

BUYER ACKNOW LEDGES THAT IT ALONE HAS D ETERMINED TH AT T HE

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR

INTENDED USE. Omron further disclaims all warranties and responsibility of

any type for claims or expenses based on infringement by the Products or oth-

erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-

gation hereunder shall be, at Omron’s election, to (i) replace (in the form

originally shipped with Buyer responsible for labor charges for removal or

replacement thereof) the non-complying Product, (ii) repair the non-complying

Product, or (iii) repay or credit Buyer an amount equal to the purchase price of

the non-complying Product ; pro vided that in no e vent sha ll Omron be responsi-

ble for warranty, repair, indemnity or any other claims or expenses regarding

the Products unless Omron’s analysis confirms that the Products were prop-

erly handled, stored, installed and maintained and not subject to contamina-

tion, abuse, misuse or inappropriate modification. Return of any Products by

Buyer must be approved in writing by Omron before shipment. Omron Compa-

nies shall not be liable for the suitability or unsuitability or the results from the

use of Products in combination with any electrical or electronic components,

circuits, system assemblies or any other materials or substances or environ-

ments. Any advice, recommendations or information given orally or in w riting,

are not to be construed as an amendment or addition to the above warranty.

See http://www.omron247.com or contact your Omron representative for pub-

lished information.

14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE

FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DA MAGES,

LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY

WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS

BASED IN C ONT RACT, WARRANT Y, NEGLIG ENCE OR ST RICT LIABILIT Y.

Further, in no event shall liability of Omron Companies exceed the individual

price of the Product on which liability is asserted.

15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and

their employees from and against all liabilities, losses, claims, costs and

expenses (including attorney's fees and expenses) related to any claim, inves-

tigation, litigation or proceeding (whether or not Omron is a party) which arises

or is alleged to arise from Buyer's acts or omissions under these Terms or in

any w ay wi th respect to the Products. Without limiti ng the f oregoing, Buyer (at

its own expense) shall indemnify and hold harmless Omron and defend or set-

tle any action brought against such Companies to the extent based on a claim

that any Product made to Buyer specifications infringed intellectual property

rights of another party.

16. Property; C onfidentiality. Any intellectual property in the Products is the exclu-

sive property of Omron Companies and Buyer shall not attempt to duplicate it

in any way without the written permission of Omron. Notwithstanding any

charges to Buyer for engineering or tooling, all engineering and tooling shall

remain the exc lusi ve property of Omron. All inf ormation and materials supplied

by Omron to Buyer relating to the Products are confidential and proprietary,

and Buyer shall limit distribution thereof to its trusted employees and strictly

prevent disclosure to any third party.

17. Export Controls. Buyer shall comply with all applicable laws, regulations and

licenses regarding (i) expor t of products or information; (iii) sale of products to

“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of

regulated technology or information.

18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right

and no course of dealing between Buyer and Omron shall operate as a waiver

of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder

without Omron's written consent. (c) Law. These Terms are governed by the

law of the jurisdiction of the home office of the Omron company from which

Buyer is purchasing the Products (without regard to conflict of law princi-

ples). ( d) Amendment. These Terms constitute the entire agreement between

Buyer and Omron relating to the Products, and no provision may be changed

or waived unless in writing signed by the parties. (e) S ever ability. If any provi-

sion hereof is rendered ineffective or invalid, such provision shall not invalidate

any other provision. (f) Setoff. Buyer shall have no right to set off any am ounts

against the amount owing in respect of this invoice. (g) Definitions. As used

herein, “including” means “including without limitation”; and “Omron Compa-

nies” (or similar words) mean Omron Corporation and any direct or indirect

subsidiary or affiliate thereof.

Certain Precautions on Specifications and Use

1. Suitability of Use. Omron Companies shall not be responsible for conformity

with any standards, codes or regulations which apply to the combination of the

Product in the Buyer’s application or use of the Product. At Buyer’s request,

Omron will provide applicable third party certification documents identifying

ratings and limitations of use which apply to the Product. This information by

itself is not sufficient for a complete determination of the suitability of the Prod-

uct in combination with the end product, machine, system, or other application

or use. Buyer shall be solely responsible for determining appropriateness of

the particular Product with respect to Buyer’s application, product or system.

Buyer shall take application responsibility in all cases but the following is a

non-exhaustive list of applications for which par ticular attention must be given:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interfer ence, or conditions or uses not described in this document.

(ii) Use in consumer products or any use in significant quantities.

(iii) Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety equip-

ment, and ins tallat i ons subject to s eparate industry or government regulations.

(iv) Systems, machines and equi pm ent that could present a risk to life or prop-

er ty. Please know and observe all prohibitions of use applicable to this Prod-

uct.

NEVER USE THE PRO DUCT FOR AN APPLICATION IN VOLVING SERIOUS

RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT

ENSUR ING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGN ED TO

ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-

ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE

OVERALL EQU IPM ENT OR SYST EM.

2. Programmable Products. Omron Companies shall not be responsible for the

user’s programming of a programmable Product, or any consequence thereof.

3. Performance Data. Data presented in Omron Company websites, catalogs

and other materials is provided as a guide for the user in determining suitabil-

ity and does not constitute a warranty. It may represent the result of Omron’s

test conditions, and the user must correlate it to actual application require-

ments. Actual performance is subject to the Omron’s Warranty and Limitations

of Liability.

4. Change in Specifications. Product specifications and accessories may be

changed at any time based on improvements and other reasons. It is our prac-

tice to change par t numbers when published ratings or features are changed,

or when significant construction changes are made. However, some specifica-

tions of the Product may be changed without any notice. When in doubt, spe-

cial part numbers may be assigned to fix or establish key specifications for

your application. Please consult with your O mron’s representative at any time

to confir m actual specifications of purchased Product.

5. Errors and Omissions. Inform ation presented by Omron Companies has been

checked and is believed to be accurate; however, no responsibility is assum ed

for clerical, typographical or proofreading errors or omissions.

OMRON ON-LINE

Global –

www.omron.com

USA –

www.omron247.com

Canada –

www.omron.ca

Brazil –

www.omron.com.br

Cat. No. E353-E1-03

Printed in USA

MEXICO SALES OFFICES

Me xico , D.F. (52) 555 660 31 44

Ciudad Juá rez (52) 656 623 70 83

Monterre y, N.L. (52) 818 377 42 81

Me xicali, B .C. (52) 686 838 01 15

BRAZIL SALES OFFICE S

Sao Paulo (55) 11 2101 6300

ARGENTINA SALES OFFICES

Cono Sur (54) 11 4787 1129

CHILE SALES OFFICES

Santiago (56) 2206 4592

OTHER LATIN AMERICAN SALES

mela@omron.com

OMRON ELECTRONICS LLC

1 Commerce Dri ve

Schaum burg, IL 60173

Tel: 84 7.84 3 .7 900

For U.S. technical support or other

inquiries: 800.556. 6766

OMRON CANADA, INC.

885 Milner Aven ue

Toronto, On tario M1B 5V8

Tel: 41 6.28 6 .6 465

11/07 Specifications subject to change wit hout notice

Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website

at www.omr on.com/oei – under the “About Us” t ab, i n the Legal Matters sect ion.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters i nto inc hes, multiply b y 0.03937. To convert grams into ounces, multiply by 0.03527.