BAV19WS
THRU
BAV21WS
410mW
Small Signal
Diodes
120 to 250 Volts
Features
• Silicon Epitaxial Planar Diodes
• For General Purpose
• This diode is also available in other case.
Mechanical Data
• Marking code: BAV19WS=A8
BAV20WS=T2
BAV21WS=T3
Maximum Ratings
Symbol Rating Rating Unit
VR
Continuous Reverse Voltage BAV19WS
BAV20WS
BAV21WS
100
150
200
V
VRRM
Repetitive Peak Reverse Voltage BAV19WS
BAV20WS
BAV21WS
120
200
250
V
IFForward DC Current at Tamb=25OC
(1) 250 mA
IF(AV)
Rectified Current (Average) Half Wave
Rectification with Resist. Load at
Tamb=25OC(1)
200 mA
IFRM Repetitive Peak Forward Current at f>50Hz,
Tamb=25OC(1)
625 mA
IFSM Surge Forward Current at t<1s, Tj=25OC 1.0 A
P
tot Power Dissipation at Tamb=25OC(1) 410 mW
RJA Thermal Resistance Junction to Ambient Air 375 mW
TJJunction Temperature -55 to +150 O
C
TSTG Storage Temperature -55 to +150 O
C
Electrical Characteristics @ 25OC Unless Otherwise Specified
Symbol Parameter Min Typ Max Units
VFForward Voltage (IF=100mA)
(IF=200mA)
---
---
---
---
1.00
1.25 V
IRLeakage Current
(VR=100V) BAV19WS
(VR=100V, Tj=100OC) BAV19WS
(VR=150V) BAV20WS
(VR=150V, Tj=100OC) BAV20WS
(VR=200V) BAV21WS
(VR=200V, Tj=100OC) BAV21WS
---
---
---
---
---
---
---
---
---
---
---
---
100
15
100
15
100
15
nA
uA
nA
uA
nA
uA
rfDynamic Forward Resistance
(I
F=10mA) --- 5.0 --- OHM
Ctot Capacitance
(VR=0, f=1.0MHz) --- 1.5 --- pF
trr Reverse Recovery Time
(I
F=30mA, IR=30mA)
(Irr=3.0mA, R
L=100OHMS)
--- --- 50 ns
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC
www.mccsemi.com
Revision: 4 2008/01/30
DIMENSIONS
INCHES MMDIM
MIN MAX MIN MAX
NOTE
A .090 .107 2.30 2.70
B .063 .071 1.60 1.80
C .045 .053 1.15 1.35
D .031 .045 0.80 1.15
E .010 .016 0.25 0.40
G .004 .018 0.10 0.45
H .004 .010 0.10 0.25
J ----- .006 ----- 0.15
SOD-323
A
B
E
C
J
D
H
G
0.022”
0.027”
SUGGESTED SOLDER
PAD LAYOUT
TM
Micro Commercial Components
x Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0 and MSL Rating 1
1 of 4
• Lead Free Finish/RoHS Compliant("P" Suffix
designates RoHS Compliant. See ordering information)
Notes: 1.Valid provided that leads are kept at ambient temperature