ADT Series
ADT Series
10
Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.corcom.com
Revised 05-07 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com
specified. Values in italics Specifications subject Germany: 49-89-6089-0
are metric equivalents. to change.
CORCOM Product Guide
High Performance Filters for High Current Three Phase Applications
Designed with very high insertion loss for Delta
applications, these three phase filters work well in industrial
applications to bring high current motor drives into
compliance with the European EMC Directives.
The series offers filters between 63 and 200 amps at 480
VAC phase-to-phase. It is available with common or
differential mode (S models) coils for the correct protection
to fit the application.
Typical insertion loss in dB:
Line-to-ground in 50 ohm circuit:
Current Frequency-MHz
Rating .01 .1 1 10 30 100 300
0063ADT6 45 85 95 100 100 100 100
0100ADT6 45 85 90 100 100 100 100
0160ADT6 45 80 90 100 100 100 100
0200ADT6 45 77 88 100 100 100 100
063ADT6S 28 45 90 90 90 90 90
100ADT6S 38 60 95 100 100 100 100
160ADT6S 37 58 85 100 100 100 100
200ADT6S 35 54 80 100 100 100 100
Line-to-line in 50 ohm circuit:
Current Frequency-MHz
Rating .01 .1 110 30 100 300
0063ADT6 35 100 100 100 100 100 100
0100ADT6 43 100 100 100 100 100 100
0160ADT6 44 100 100 100 100 100 100
0200ADT6 43 100 100 100 100 100 100
063ADT6S 35 100 100 100 100 100 100
100ADT6S 43 100 100 100 100 100 100
160ADT6S 44 100 100 100 100 100 100
200ADT6S 43 100 100 100 100 100 100
UL Recognized
Specifications
Maximum leakage current, each line-to-ground
ADT6 1.3A@ 277VAC 60 Hz:
63ADT6S 2.6A@ 277VAC 60 Hz:
100, 160, 200ADT6S 4.6A@ 277VAC 60 Hz:
Hipot rating (one minute):
line-to-ground 2210 VDC
line-to-line 2158 VDC
Operating frequency: 50/60 Hz
Rated voltage:
phase-to-phase: 480 VAC
phase-to-ground: 277 VAC
ADT6/ADT6S
Electrical Schematics
100, 160 & 200 ADT6
A
B
C
A
B
C
LINE LOAD
63ADT6
A
B
C
A
B
C
LINE LOAD
ADT6S
A
B
C
A
B
C
LINE LOAD
Resistor location for reference only.Resistor location for reference only.
Part No. FGHJK
±.030 ± .030 ± .030 ± .030 (max)
± .76 ± .76 ± .76 ± .76
63ADT6 11.97 7.50 1.75 2.00 6.00
304.0 190.5 44.4 50.8 152.4
63ADT6S 16.97 7.50 3.00 3.00 6.00
431.0 190.5 76.2 76.2 152.4
100ADT6 16.97 7.50 3.00 3.00 6.00
431.0 190.5 76.2 76.2 152.4
100ADT6S 16.97 8.50 3.00 3.00 6.00
431.0 215.9 76.2 76.2 152.4
160/200ADT6 16.97 7.50 3.00 3.00 6.00
431.0 190.5 76.2 76.2 152.4
160/200ADT6S 19.97 10.50 2.75 3.00 7.00
507.2 266.7 69.8 76.2 177.8
ADT Series
11
Catalog 1654001 Dimensions are in inches and Dimensions are shown for USA Cust. Svc.: 1-800-468-2023 www.corcom.com
Revised 05-07 millimeters unless otherwise reference purposes only. CORCOM Prods: 1-847-680-7400 www.tycoelectronics.com
specified. Values in italics Specifications subject Germany: 49-89-6089-0
are metric equivalents. to change.
RFI Power Line Filters
CORCOM Product Guide
High Performance Filters for High Current Three Phase Applications (Continued)
Case Style
C
LC
L
C
LC
L
0.75
0.69 Typ.
See Note
3/8-16 Thread
(7x)
Mounting
Bracket
0.75 x 0.44 Slot
(2x)
H
A
F
G
B
J
C
E
K
(2x)
D
(2x)
2.00
1.00
1.18 x 0.56 Slot
(2x) 2.0 Max. (6x)
0.75
(2x) 0.75
G
Line Load
Case Dimensions
Part No. ABCDE
± .030
(max) (max) (max) (max)
±.76
63ADT6 14.00 10.00 3.50 8.50 10.00
355.6 254.0 89.0 216.0 254.0
63ADT6S 19.00 10.00 4.50 8.50 15.00
482.6 254.0 114.3 216.0 381.0
100ADT6 19.00 10.00 4.50 8.50 15.00
482.6 254.0 114.3 216.0 381.0
100ADT6S 19.00 11.00 4.50 8.50 15.00
482.6 279.4 114.3 216.0 381.0
160/200ADT6 19.00 10.00 4.50 8.50 15.00
482.6 254.0 114.3 216.0 381.0
160/200ADT6S 22.00 13.00 4.50 11.50 18.00
558.8 330.2 114.3 292.2 457.2
Part Numbers
063ADT6 063ADT6S
100ADT6 100ADT6S
160ADT6 160ADT6S
200ADT6 200ADT6S
Terminals:
63ADT6, 63ADT6S, 100ADT6S: 3/8-16 (6)
Torque (Max.): 70 in.lb.
100ADT6, 160ADT6, 160ADT6S, 200ADT6, 200ADT6S: 7/16-20 (6)
Torque (Max.): 125 in.lb.
