FR1A - FR1M GLASS PASSIVATED FAST RECOVERY RECTIFIER NOT RECOMMENDED FOR NEW DESIGNS, PLEASE USE RS1AB - RS1MB Features * * * * * * For Surface Mounted Applications Capable of Meeting Environmental Standards of MIL-STD-19500 Plastic Material - UL Flammability Classification 94V-0 High Reliability Submersible Temperature of 265 C for 10 Seconds in Solder Bath Glass Passivated Junction B SMB A C D Mechanical Data * * * * * J Case: SMB, Molded Plastic Terminals: Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Approx. Weight: 0.093 grams Mounting Position: Any G E H Dim Min Max A 3.30 3.94 B 4.00 4.65 C 1.95 2.21 D 0.15 0.40 E 5.00 6.00 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm Maximum Ratings and Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz resistive or inductive load. Unit FR1A FR1B FR1D FR1G FR1J FR1K FR1M Unit Maximum Recurrent Peak Reverse Voltage Characteristic VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @ TA = 75C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) I(AV) 1.0 A IFSM 30 A Maximum Instantaneous Forward Voltage at 1.0 A VF 1.3 V Maximum DC Reverse Current at Rated @ TA = 25C DC Blocking Voltage @ TA = 125C Maximum Full Load Reverse Current Full Cycle Average @ TA = 75C 5.0 100 mA IR 50 mA Maximum Reverse Recovery Time (See Note 1) MaximumThermal Resistance (See Note 2) trr RQJL 150 250 500 500 ns 30 C/W Typical Junction Capacitance (See Note 3) CJ 15 pF Operating and Storage Temperature Rating TJ, TSTG -65 to +175 C Notes: 1. Reverse Recovery Test Conditions: I F = 0.5A, IR = 1A, IRR = 0.25A 2. Thermal Resistance from junction to lead with 6.0mm 2 copper pads 3. Measured at 1.0MHz and applied reverse voltage of 4.0V DS15003 Rev. 5 - 3 1 of 2 www.diodes.com FR1A-FR1M a Diodes Incorporated 0.8 0.6 0.4 0.2 Single Phase Half Wave 60Hz Resistive or Inductive Load 9.5mm Lead Lengths 0 20 40 60 80 100 120 140 160 180 IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE OUTPUT CURRENT (A) 1.0 4.0 1.0 0.1 TJ = 25C PULSE WIDTH = 300mS 2% DUTY CYCLE 0.01 0.6 0.8 1.0 1.2 1.4 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2, Typical Forward Characteristics TA, AMBIENT TEMPERATURE (C) Fig. 1, Forward Current Derating Curve IFSM, PEAK FORWARD SURGE CURRENT (A) 30 CJ, JUNCTION CAPACITANCE (pF) 100 TJ = 25C 10 1 1 10 100 25 20 15 10 8.3ms SINGLE HALF SINE-WAVE JEDEC METHOD 5 1 VR, REVERSE VOLTAGE (V) Fig. 3, Capacitance Characteristics DS15003 Rev. 5 - 3 10 100 NUMBER OF CYCLES @ 60Hz Fig. 4, Max Non-Repetitive Peak Forward Surge Current 2 of 2 www.diodes.com FR1A-FR1M