CV160160A-Cx-Bx-Nx-x - Clover China Display (Shenzhen) Limited.

CLOVER CHINA DISPLAY (SHENZHEN) LTD.

高華電子顯示(深圳)有限公司

LCD MODULE SPECIFICATION

Model : CV160160A - _ _ - _ _ - _ _ - _

Revision 01

Engineering Yamaha Yam

Date 2003 年9月29 日

Our Reference 4945

工廠: 中國深圳市南山區沙河工業城B4幢

郵編: 518053

電話: (86)755-26932073 傳真: (86)755-26932370

電郵: sales@cloverchina.com

網址 : http://www.cloverchina.com

高華電子顯示(深圳)有限公司. CV160160A

規格書版本.01 第 1 頁，共 8 頁

MODE OF DISPLAY

Display mode Display condition Viewing direction

STN : □ Yellow green □ Reflective type □ 6 O’ clock

□ Grey □ Transflective type □ 12 O’ clock

□ Blue (negative) □ Transmissive type □ 3 O’ clock

□ FSTN positive □ Others □ 9 O’ clock

□ FSTN negative

LCD MODULE NUMBER NOTATION:

CV160160A- MY - S F - N 6 – T *(1)---Model number of standard LCD Modules

(1) (2) (3) (4) (5) (6) (7) (8) N – No backlight

E – EL backlight

L – Side-lited LED backlight

M– Array LED backlight

C – CCFL

*(3)---Backlight color

N – No backlight

A – Amber

B – Blue

O– Orange

W–White

Y – Yellow green

*(4)---Display mode

T – TN

V – TN (Negative)

S – STN Yellow green

G – STN Grey

B – STN Blue (Negative)

F – FSTN

N – FSTN (Negative)

*(5)---Rear polarizer type

R – Reflective

F – Transflective

T – Transmissive

*(6)---Temperature range

N – Normal

W– Extended

*(7)---Viewing direction

6 – 6 O’clock

2 – 12 O’clock

3 – 3 O’clock

9 – 9 O’clock

*(8)---Special code for other requirements

(Can be omitted if not used)

T – Touch panel (Analog)

P – Touch panel (Digital)

高華電子顯示(深圳)有限公司. CV160160A

規格書版本.01 第 2 頁，共 8 頁

GENERAL DESCRIPTION

Display mode : 160x160 dots, Graphic COB LCD module,

Interface : 4 bit data transfer

Driving method : 1/160 duty, 1/15 bias

Driver IC : PTC PT6601, PT6630 or equivalent

For the detailed information, please refer to the IC specifications.

MECHANICAL DIMENSIONS

Item Dimension Unit Item Dimension Unit

Outline Dimension 89.2(L)x85.0(W)x(H1/H2) mm Dot Pitch 0.38(L)x0.38(W) mm

Viewing Area 62.0(L)x62.0(W) mm Dot Size 0.34(L)x0.34(W) mm

No Backlight (N) H1 － mm

Side Backlight (L) H1 6.35 mm

H2 － mm H2 11.0 mm

EL Backlight (E) H1 － mm Array Backlight (M) H1 － mm

H2

－ mm H2

－ mm

CCFL Backlight (C) H1 － mm －－－－

H2

－ mm －－－

CONNECTOR PIN ASSIGNMENT

Pin No. SYMBOL Function

1 VSS Power Supply (GND)

2 M Alternate signal for LCD drive

3 FLM First Line Marker

4 CL1 Latch Signal

5 CL2 Clock Pulse

6 D3 Data Bus

7 D2 Data Bus

8 D1 Data Bus

9 D0 Data Bus

10 VEE LCD drive supply voltage

11 VDD Logic Power Supply

12 VO Voltage adjust for LCD drive

13 DISPOFF Display off control

14 BKL-K Back Light Supply (-)

15 BKL-A Back Light Supply (+)

高華電子顯示(深圳)有限公司. CV160160A

規格書版本.01 第 3 頁，共 8 頁

COUNTER DRAWIING OF MODULE DIMENSION

高華電子顯示(深圳)有限公司. CV160160A

規格書版本.01 第 4 頁，共 8 頁

COUNTER DREWING OF PIN OUT & BLOCK DIAGRAM

高華電子顯示(深圳)有限公司. CV160160A

規格書版本.01 第 5 頁，共 8 頁

ELECTRICAL CHARACTERISTICS Conditions: VSS=0V, @Ta=25℃

Item Symbol MIN. TYP. MAX. Unit Item Symbol

MIN. TYP. MAX. Unit

Supply Voltage VDD 4.75 5.00 5.25 V “H”Level Input Voltage VIH 0.8 VDD － VDD V

Supply Current IDD － 2.0 － mA “L”Level Input Voltage VIL 0 － 0.2 VDD V

Supply Voltage for LCD VO － 19.0 － V －－－－－－

Backlight Voltage Backlight Current

EL (@ Frequency 400Hz) VEL －－－ Vrms －－－－－－

Side-lited LED Side-lited LED

White VBL 19.5 20.0 20.5 V White IBL － 20 22 mA

Blue VBL －－－ V Blue IBL －－－ mA

Yellow Green VBL －－－ V Yellow Green IBL －－－ mA

Array LED Array LED

Yellow Green VBL －－－ V Yellow Green IBL －－－ mA

Amber VBL －－－ V Amber IBL －－－ mA

Orange VBL －－－ V Orange IBL －－－ mA

Soft Orange VBL －－－ V Soft Orange IBL －－－ mA

CCFL CCFL

White VBL －－－ Vrms White IBL －－－ mArms

ABSOLUTE MAXIMUM RATINGS

Please make sure not to exceed the following maximum rating values under the worst application conditions

Item Symbol Rating (for normal temperature) Rating (for wide temperature) Unit

Supply Voltage VDD 7 7 V

Input Voltage VT -0.3 to VDD +0.3 -0.3 to VDD +0.3 V

Operating Temperature Topr 0 to 50 -20 to 70 ℃

Storage Temperature Tstg -10 to 60 -30 to 80 ℃

高華電子顯示(深圳)有限公司. CV160160A

規格書版本.01 第 6 頁，共 8 頁

TIMING CHART

DISPLAY AND DATA

#160

#1

CL1

CL2

160 X T

T

CL1

高華電子顯示(深圳)有限公司. CV160160A

規格書版本.01 第 7 頁，共 8 頁

ELECTRO-OPTICAL CHARACTERISTICS

MEASURING CONDITION: POWER SUPPLY = VOP / 64 Hz

TEMPERATURE = 22 ± 5 °C

RELATIVE HUMIDITY = 60 ± 15 %

ITEM SYMBOL UNIT TYP. TN TYP. STN

RESPONSE TIME Ton ms 100 200

T

off ms 80 200

CONTRAST RATIO Cr - 10 10

V

3:00 ° 20 20

VIEWING ANGLE (6 O’clock) V6:00 ° 20 40

(Cr

≥ 2) V9:00 ° 20 20

V

12:00 ° 10 10

THE ELECTRO-OPTICAL CHARACTERISTICS ARE MEASURED VALUE BUT NOT GUARANTEED ONES.

RELIABILITY OF LCD MODULE

ITEM TEST CONDITION

FOR NORMAL TEMPERATURE TEST CONDITION

FOR WIDE TEMPERATURE

TIME

High temperature operating 50°C 70°C 240 hours

Low temperature operating 0°C -20°C 240 hours

High temperature storage 60°C 80°C 240 hours

Low temperature storage -10°C -30°C 240 hours

Temperature-humidity storage 40°C 90% R.H. 60°C 90% R.H. 96 hours

Temperature cycling -10°C to 60°C

30 Min Dwell -30°C to 80°C

30 Min Dwell 5 cycles

QUALITY STANDARD OF LCD MODULE

1.0 Sampling Method

Sampling Plan : MIL STD 105 E

Class of AQL : Level II/Single Sampling

Critical : 0.25% Major 0.65% Minor 1.5%

2.0 Defect Group Failure Category Failure Reasons

Critical Defect

0.25%(AQL) Malfunction Open

Short

Burnt of dead component

Missing part/improper part P.C.B.

Broken

Major Defect

0.65%(AQL) Poor Insulation Potential short

High current

Component damage or scratched

or Lying too close improper coating

Poor Conduction Damage joint

Wrong polarity

Wrong spec. part

Uneven/intermittent contact

Loose part

Copper peeling

Rust or corrosion or dirt‘s

Minor Defect

1.5%(AQL) Cosmetic Defect Minor scratch

Flux residue

Thin solder

Poor plating

Poor marking

Crack solder

Poor bending

Poor packing

Wrong size

高華電子顯示(深圳)有限公司. CV160160A

規格書版本.01 第 8 頁，共 8 頁

HANDLING PRECAUTIONS

(1) CAUTION OF LCD HANDLING & CLEANING

Use soft cloth with solvent (recommended below) to clean the display surface and wipe lightly.

- Isopropyl alcohol, ethyl alcohol, trichlorotriflorothane

Do not wipe the display surface with dry or hard materials that will damage the polarizer surface. Do not use

the following solvent;

-water, ketone, aromatics

(2) CAUTION AGAINST STATIC CHARGE

The LCD modules use CMOS LSI drivers, so customers are recommend that any unused input terminal

would be connected to VDD or VSS , do not input any signals before power is turned on, and ground your

body, work/assembly areas, assembly equipment to protect against static electricity.

(3) PACKAGING

Avoid intense shock and falls from a height and do not operate or store them exposed direct to sunshine or

high temperature/humidity.

(4) CAUTION FOR OPERATION

It is an indispensable condition to drive LCD’s within the specified voltage limit since the higher voltage

than the limit causes the shorter LCD life. The use of direct current drive should be avoided because an

electrochemical reaction due to direct current causes LCD’s undesirable deterioration.

Response time will be extremely delayed at low temperature, and LCD’s show dark color at high

temperature. However those phenomena do not mean malfunction or out of order with LCD’s.

Some font will be abnormally displayed when the display area is pushed hard during operation. But it

resumes normal condition after turning off once.

(5) SAFETY

For crash damaged or unnecessary LCD’s, it is recommended to wash off liquid crystal by either of solvents

such as acetone and ethanol and should be burned up later.

When any liquid leaked out of a damaged glass cell comes in contact with your hands, wash it off with soap

and water.

WARRANTY

CLOVER will replace or repair any of her LCD module in accordance with her LCD specification for a period

of one year from date of shipment. The warranty liability of Clover is limited to repair and/or replacement.

Clover will not be responsible for any subsequent or consequential event.