NPN Power Silicon Transistor 2N3766 & 2N3767 Features * Available in JAN, JANTX, and JANTXV per MIL-PRF-19500/518 * TO-66 (TO-213AA) Package Maximum Ratings Symbol 2N3766 2N3767 Units Collector - Emitter Voltage Ratings VCEO 60 80 Vdc Collector - Base Voltage VCBO 80 100 Vdc Emitter - Base Voltage VEBO 6.0 Vdc Base Current IB 2.0 Adc Collector Current IC 4.0 Adc Total Power Dissipation @ TC = +25 C (1) PT 25 W Top, Tstg -65 to +200 C Operating & Storage Temperature Range Thermal Characteristics Characteristics Thermal Resistance, Junction-to-Case Symbol Maximum Units RJC 2.66 C/W 1) Derate linearly 143 mW/C between TC = +25C and TC = +200C Electrical Characteristics (TC = 25C unless otherwise noted) OFF Characteristics Collector - Emitter Breakdown Voltage IC = 100 mAdc 2N3766 2N3767 Symbol Mimimum Maximum Units V(BR)CEO 60 80 --- Vdc Collector - Emitter Cutoff Current VCE = 60 Vdc VCE = 80 Vdc 2N3766 2N3767 ICEO --- 500 500 Adc Collector - Emitter Cutoff Current VCE = 80 Vdc, VBE = 1.5 Vdc VCE = 100 Vdc, VBE = 1.5 Vdc 2N3766 2N3767 ICEX --- 10 Adc Collector - Base Cutoff Current VCB = 80 Vdc VCB = 100 Vdc 2N3766 2N3767 ICBO --- 10 10 Adc IEBO --- 500 Adc Emitter - Base Cutoff Current VEB = 6.0 Vdc Revision Date: 4/3/2013 New Product 1 2N3766 & 2N3767 Electrical Characteristics -con't ON Characteristics (2) Symbol Minimum HFE 40 Forward Current Transfer Ratio IC = 50 mAdc, VCE = 5.0 Vdc IC = 500 mAdc, VCE = 5.0 Vdc IC = 1.0 Adc, VCE = 10.0 Vdc Collector - Emitter Saturation Voltage IC = 1.0 Adc, IB = 0.1 Adc IC = 0.5 Adc, IB = 0.5 Adc Base-Emitter Voltage IC = 1.0 Adc, VCE = 10.0 Vdc Maximum Unit 30 160 20 VCE(sat) ----- 2.5 1.0 Vdc VBE(on) --- 1.5 Vdc | hfe | 1.0 8.0 Cobo --- 50 pF ton --- 0.25 s toff --- 2.5 s DYNAMIC Characteristics Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 500 mAdc, VCE = 10.0 Vdc, f = 10 MHz Output Capacitance VCB = 10 Vdc, IE = 0, 0.1 MHz f 1.0 MHz Switching Characteristics Tum-on Time VCC = 30 Vdc, IC = 0.5 Adc, IB1 = 0.05 Adc Tum-Off Time VCC = 30 Vdc, IC = 0.5 Adc, IB1 = -IB2 = 0.05 Adc SAFE OPERATING AREA DC Tests: TC = +25 C, 1 Cycle, t = 1.0 s Test 1: VCE = 6.22 Vdc, IC = 4.0 Adc VCE = 20 Vdc, IC = 1.25 Adc Test 2: Test 3: VCE = 50 Vdc, IC = 150 mAdc VCE = 65 Vdc, IC = 150 mAdc 2N3766 2N3767 (2) Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. 2 603-641-3800 * 888-641--SEMI (7364) * metelics-sales@aeroflex.com * www.aeroflex.com/metelics Revision Date: 4/3/2013 2N3766 & 2N3767 Outline Drawing NOTE: Dimensions in Inches [mm] Aeroflex / Metelics, Inc. 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 ISO 9001: 2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Fax: (603)-641-3500 Sales: 888-641-SEMI (7364) Hi-Rel Components 9 Hampshire Street, Lawrence, MA 01840 Tel: (603) 641-3800 Fax: (978) 683-3264 www.aeroflex.com/metelicsHRC www.aeroflex.com/metelics metelics-sales@aeroflex.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2013 Aeroflex / Metelics. All rights reserved. Revision Date: 2/26/2013 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.