Terrapin terminology and mating options Terrapin terminology Terrapin part numbering Example: SCE2-B-76A06-07SN-002 | (985) for optional grounding spring in L1K and L1T | (981) castellated panel nut L1K Crimp ferrule SCE2- B- XXX XX- XX -X X- XXX Series identifier Style Plugs 76A 67A 06K 06T 76T Receptacles 01K L1K 01T L1T 07A 71A Shell size and number of contacts 06-07 07-10A 07-12 07-14 08-19 09-26 10-37 (See page 7) Contact style P = Pins S = Sockets Key orientation N = Normal A B C D (See diagrams below) Variant code 001 PC Tails 002 Solder Buckets 003 Backshell Plating finish B = Black Silver (RoHS) Integral backshell for direct screen termination Body Backshell 01K Coupling ring Integral backshell Terrapin mating options Chassis Mount Plug SCE2-B-76A Terrapin part numbering L1T Terrapin plug and receptacle keyway orientation Push-pull Inline Receptacle SCE2-B-01K The same chassis mount plug will mate with both push-pull and latch receptacles Latch Inline Receptacle SCE2-B-L1K Keyway orientation letter PLUG keyway orientation RECEPTACLE keyway orientation Keyway orientation letter N C A D PLUG keyway orientation RECEPTACLE keyway orientation B 4 TERRAPIN SERIES TERRAPIN SERIES 5 Test/parameter Description Terrapin insert availability Shell size Electrical Current Rating Shell to Shell Continuity Contact Resistance Insulation Resistance Working Voltage Dielectric Withstanding Voltage View shown for reference / View from rear of plug* 23 AWG contacts: 3A d.c. 20 AWG contacts: 7.5A d.c. 10m max (screened) 200m max (unscreened) Size 20 and 23 contacts: 5m initial 10m maximum 5000M minimum AC (RMS) 400V 2mA maximum leakage 06 07 08 09 10 06-07 07-10A 08-19 09-26 10-37 Terrapin insert availability Terrapin performance information Terrapin performance information 07-12 Technical Mating Durability Backshell Overtorque Panel Nut Overtorque Non-magnetic 2000+ cycles 25 lb.f.in. 30 lb.f.in. Yes Environmental Operating Temperature Range Temperature Endurance Sealing (mated and unmated) Air Leakage Salt Spray Altitude Immersion RoHS Compliant Suitable for RoHS compliant Soldering -55C to +125C 250 hours +125C IP68, 1 hour at 2 metres* Less than 1cc per hour 1000 hours 70,000 Feet Yes Yes *Contact the factory if greater depth/duration of sealing is required 07-14 23AWG contacts 20AWG contacts *View from rear of receptacle is mirror image of above. 6 TERRAPIN SERIES TERRAPIN SERIES 7