Agilent HSMx-A4xx-xxxxx SMT LED Surface Mount LED Indicator Data Sheet Features * Industry standard PLCC-4 * High reliability LED package * High brightness using AlInGaP and InGaN dice technologies * High optical efficiency * Higher ambient temperature at the same current possible compared to TLED * Available in full selection of colors Description Agilent Power PLCC-4 is an extension of our PLCC-2 SMT LEDs. The package can be driven at higher current due to its superior package design. The product is able to dissipate heat more efficiently compared to the conventional PLCC-2 SMT LEDs. In proportion to the increase in driving current, this family of LEDs is able to produce higher light output compared to the conventional PLCC-2 SMT LEDs. These SMT LEDs have higher reliability and better performance and are designed to work under a wide range of environmental conditions. This higher reliability makes them suitable for use under harsh environment and conditions like automotive. In addition, they are also suitable to be used in electronic signs and signals. * Super wide viewing angle at 120 To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin (except for red color), to provide close uniformity. These LEDs are compatible with IR solder reflow process. Due to the high reliability feature of these products, they also can be mounted using through-the-wave soldering process. There are a variety of colors and various viewing angles (30, 60 and 120) available in these SMT LEDs. Ideally, the 30 parts are suitable for light piping where focused intensities are required. As for the 60 and 120, they are most suitable for automotive interior and exterior lighting and electronic signs applications. * Available in 8mm carrier tape on 7-inch reel * Compatible with both IR and TTW soldering process Applications * Interior automotive - Instrument panel backlighting - Central console backlighting - Cabin backlighting - Navigation and audio system - Dome lighting - Push button backlighting * Exterior automotive - Turn signals - CHMSL - Rear combination lamp - Puddle light * Electronic signs and signals - Interior and exterior full color sign - Variable message sign - Garden lighting * Office automation, home appliances, industrial equipment - Front panel backlighting - Push button backlighting - Display backlighting CAUTION: HSMN-, HSMK-, HSMM-A40x-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details. Package Dimensions 2.8 0.2 1.9 0.2 2.2 0.2 A 0.1 TYP. 0.8 0.1 C 3.2 0.2 3.5 0.2 0.8 0.3 C C 0.5 0.1 0.7 0.1 CATHODE MARKING NOTE: ALL DIMENSIONS IN mm. 2 Device Selection Guide Color Part Number Dice Technology Luminous Intensity Iv (mcd) @ IF = 50 mA Min. Typ. Red HSMC-A400-R00J1[3] AS AlInGaP 100 200 Red HSMC-A401-T00J1 [3] AS AlInGaP 250 400 Red Orange HSMJ-A401-T00J1[3] AS AlInGaP 250 500 Orange HSML-A401-U00J1 [3] AS AlInGaP 400 700 Amber HSMA-A400-R00J1[3] AS AlInGaP 100 150 Amber HSMA-A401-U00J1[3] AS AlInGaP 400 550 Yellow Green HSME-A400-P02J1 AS AlInGaP 40 100 Yellow Green HSME-A401-Q02J1 AS AlInGaP 63 100 Emerald Green HSME-A400-P01J1 AS AlInGaP 40 70 Color Part Number Dice Technology Luminous Intensity Iv (mcd) @ IF = 30 mA Min. Typ. Green HSMM-A401-R00J1 InGaN 100 280 Cyan HSMK-A401-R00J1 InGaN 100 180 Blue HSMN-A401-N00J1 InGaN 25 80 Notes: 1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Designed for Automotive Application. Absolute Maximum Ratings (TA = 25C) Parameters AS AlInGaP InGaN DC Forward Current[1] 70 mA[3,4] 30 mA Peak Forward Current [2] 200 mA 90 mA Power Dissipation 180 mW 114 mW Reverse Voltage 5V 5V Junction Temperature 110C 110C Operating Temperature -40C to +100C -40C to +100C Storage Temperature -40C to +100C -40C to +100C Notes: 1. Derate linearly as shown in figure 5. 2. Duty factor = 10%, Frequency = 1 kHz. 3. Drive current between 10 mA and 70 mA is recommended for best long-term performance. 4. Operation at current below 5 mA is not recommended. 3 Optical Characteristic (TA = 25C) Color Dice Technology Peak Wavelength PEAK (nm) Typ. Dominant Wavelength D (nm) Typ. Viewing Angle 21/2 (Degrees) Typ. Luminous Efficacy v[5] (lm/W) Typ. Luminous Intensity/ Total Flux Iv (mcd)/ v (mlm) Typ. Red AS AlInGaP 635 626 120 150 0.45 Red Orange AS AlInGaP 621 615 120 240 0.45 Orange AS AlInGaP 609 605 120 320 0.45 Amber AS AlInGaP 592 590 120 480 0.45 Yellow Green AS AlInGaP 576 575 120 560 0.45 Emerald Green AS AlInGaP 568 567 120 610 0.45 Green InGaN 518 525 120 500 0.45 Cyan InGaN 502 505 120 300 0.45 Blue InGaN 468 472 120 75 0.45 Notes: 1. The dominant wavelength, D, is derived from the CIE Chromaticity Diagram and represents the color of the device. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt. Electrical Characteristic (TA = 25C) Forward Voltage VF (Volts) @ IF = 50 mA Reverse Voltage VR @ 100 A Dice Technology Typ. Max. Min. AS AlInGaP 2.2 2.5 5 Forward Voltage VF (Volts) @ IF = 30 mA Reverse Voltage VR @ 10 A Dice Technology Typ. Max. Min. InGaN 3.8 4.6 5 1.0 RELATIVE INTENSITY 0.9 BLUE EMERALD GREEN CYAN YELLOW GREEN 0.8 0.7 GREEN AMBER 0.6 0.5 ORANGE 0.4 RED ORANGE 0.3 RED 0.2 0.1 0 380 430 480 530 580 630 WAVELENGTH - nm Figure 1. Relative intensity vs. wavelength. 4 680 730 780 1.6 70 1.2 1.4 60 AlInGaP 50 40 30 InGaN 20 10 0 RELATIVE INTENSITY (NORMALIZED AT 30 mA) 1.4 RELATIVE INTENSITY (NORMALIZED AT 50 mA) FORWARD CURRENT - mA 80 1.0 0.8 0.6 0.4 0.2 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0 10 40 50 60 AlInGaP 50 40 30 20 InGaN 10 80 0 20 40 60 80 100 120 500 InGaN CYAN 490 480 InGaN BLUE 470 5 10 15 20 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 -50 -30 -10 10 ANGLE - DEGREES Figure 7. Radiation pattern. 30 35 Figure 6. Dominant wavelength vs. forward current - InGaN devices. 0.9 -70 25 CURRENT - mA 1.0 0 -90 30 0.6 0.4 50 70 90 0 0 5 10 15 20 25 Figure 4. Relative intensity vs. forward current (InGaN). 510 0 0.8 30 FORWARD CURRENT - mA InGaN GREEN 520 460 Figure 5. Maximum forward current vs. ambient temperature, derated based on TJ max = 110C, R JA = 300C/W. RELATIVE INTENSITY 70 530 AMBIENT TEMPERATURE - C 5 60 540 DOMINANT WAVELENGTH - nm MAXIMUM FORWARD CURRENT - mA 30 Figure 3. Relative intensity vs. forward current (AlInGaP). 70 0 20 FORWARD CURRENT - mA 80 1.0 0.2 FORWARD VOLTAGE - V Figure 2. Forward current vs. forward voltage. 1.2 35 3.30 2.60 3.30 0.40 1.10 0.50 4.50 7.50 1.50 SOLDER RESIST DIMENSIONS IN mm. Figure 8a. Recommended soldering pad pattern. 3.5 (0.138) 6.1 (0.240) 2.8 (0.110) 1.5 (0.059) 3.5 (0.138) 2.0 (0.079) 2.0 (0.079) 8.0 (0.315) 6.0 (0.236) 1.0 (0.039) 2.0 (0.079) 3.0 (0.118) 2.8 (0.110) 7.5 (0.295) Figure 8b. Recommended soldering pad pattern (TTW). 10-40 SEC. 3C/SEC. MAX. 183C -6C/SEC. MAX. TEMPERATURE TEMPERATURE 20 SEC. MAX. 240C MAX. 3C/SEC. MAX. 100-150C 0.5 (0.020) 240-245C PRE-HEAT 120-180C ABOVE 183C 6C/SEC. MAX. 2-3C/SEC. 120 SEC. MAX. 60-150 SEC. TIME Figure 9. Recommended reflow soldering profile. 6 TIME Figure 10. Recommended wave soldering profile. TRAILER COMPONENT LEADER 480 mm MIN. FOR 180 REEL. 960 mm MIN. FOR 330 REEL. 200 mm MIN. FOR 180 REEL. 200 mm MIN. FOR 330 REEL. C A USER FEED DIRECTION Figure 11. Tape leader and trailer dimensions. +0.1 1.5 -0 4 0.1 2 0.05 3.6 0.1 B 1.75 0.1 C C C A 5.5 0.05 A A 3.8 0.1 +0.3 12-0.1 1 +0.1 -0 B 8 0.1 0.229 0.01 3.45 0.1 VIEW B-B VIEW A-A ALL DIMENSIONS IN mm. Figure 12. Tape dimensions. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 13. Reeling orientation. 7 Storage Condition: 5 to 30C @ 60% relative humidity max. Baking is required under the condition: a) the humidity indicator card color becoming pink b) the pack has been opened for more than 1 week Baking recommended condition: 60 5C for 20 hours. Intensity Bin Select (X5X 6) Individual reel will contain parts from one half bin only. Color Bin Select (X 7) Individual reel will contain parts from one full bin only. X5 X7 Min. Iv Bin X6 0 Full Distribution 0 Full Distribution Z A and B only 3 3 half bins starting from X51 Y B and C only 4 4 half bins starting from X51 W C and D only 5 5 half bins starting from X51 V D and E only 7 3 half bins starting from X52 U E and F only 8 4 half bins starting from X52 T F and G only 9 5 half bins starting from X52 S G and H only Q A, B and C only P B, C and D only Intensity Bin Limits N C, D and E only Bin ID Min. (mcd) Max. (mcd) M D, E and F only N1 28.50 35.50 L E, F and G only N2 35.50 45.00 K F, G and H only P1 45.00 56.00 1 A, B, C and D only P2 56.00 71.50 2 E, F G and H only Q1 71.50 90.00 Q2 90.00 112.50 R1 112.50 140.00 R2 140.00 180.00 S1 180.00 224.00 S2 224.00 285.00 T1 285.00 355.00 T2 355.00 450.00 U1 450.00 560.00 U2 560.00 715.00 V1 715.00 900.00 V2 900.00 1125.00 W1 1125.00 1400.00 W2 1400.00 1800.00 Tolerance of each bin limit = 12% Color Bin Limits Emerald Green Min. (nm) A 552.5 B 555.5 C 558.5 D 561.5 Max. (nm) 555.5 558.5 561.5 564.5 Yellow Green E F G H Min. (nm) 564.5 567.5 570.5 573.5 Max. (nm) 567.5 570.5 573.5 576.5 Amber/ Yellow A B C D E F Min. (nm) 582.0 584.5 587.0 589.5 592.0 594.5 Max. (nm) 584.5 587.0 589.5 592.0 594.5 597.0 Color Bin Limits Blue Min. (nm) A 460.0 B 465.0 C 470.0 D 475.0 Max. (nm) 465.0 470.0 475.0 480.0 Orange A B C D E Min. (nm) 597.0 600.0 603.0 606.0 609.0 Max. (nm) 600.0 603.0 606.0 609.0 612.0 Cyan A B C D Min. (nm) 490.0 495.0 500.0 505.0 Max. (nm) 495.0 500.0 505.0 510.0 Red Orange A B Min. (nm) 611.0 616.0 Max. (nm) 616.0 620.0 Min. (nm) 515.0 520.0 525.0 530.0 Max. (nm) 520.0 525.0 530.0 535.0 Red Min. (nm) Full Distribution Max. (nm) Green A B C D Tolerance of each bin limit = 1 nm Packaging Option (X8X9 ) X8X9 J1 8 Top Mount, 7 inch Reel www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright (c) 2003 Agilent Technologies, Inc. March 4, 2003 5988-8320EN