Description
Agilent Power PLCC-4 is an
extension of our PLCC-2 SMT
LEDs. The package can be driven
at higher current due to its
superior package design. The
product is able to dissipate heat
more efficiently compared to the
conventional PLCC-2 SMT LEDs.
In proportion to the increase in
driving current, this family of
LEDs is able to produce higher
light output compared to the
conventional PLCC-2 SMT LEDs.
These SMT LEDs have higher
reliability and better performance
and are designed to work under a
wide range of environmental
conditions. This higher reliability
makes them suitable for use
under harsh environment and
conditions like automotive. In
addition, they are also suitable to
be used in electronic signs and
signals.
Agilent HSMx-A4xx-xxxxx SMT LED
Surface Mount LED Indicator
Data Sheet
CAUTION: HSMN-, HSMK-, HSMM-A40x-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate
precautions during handling and processing. Refer to Agilent Application Note AN-1142 for additional details.
To facilitate easy pick and place
assembly, the LEDs are packed in
EIA-compliant tape and reel.
Every reel will be shipped in
single intensity and color bin
(except for red color), to provide
close uniformity.
These LEDs are compatible with
IR solder reflow process. Due to
the high reliability feature of
these products, they also can be
mounted using through-the-wave
soldering process.
There are a variety of colors and
various viewing angles (30°, 60°
and 120°) available in these SMT
LEDs. Ideally, the 30° parts are
suitable for light piping where
focused intensities are required.
As for the 60° and 120°, they are
most suitable for automotive
interior and exterior lighting and
electronic signs applications.
Features
• Industry standard PLCC-4
• High reliability LED package
• High brightness using AlInGaP and
InGaN dice technologies
• High optical efficiency
• Higher ambient temperature at the
same current possible compared to
TLED
• Available in full selection of colors
• Super wide viewing angle at 120˚
• Available in 8mm carrier tape on
7-inch reel
• Compatible with both IR and TTW
soldering process
Applications
• Interior automotive
– Instrument panel backlighting
– Central console backlighting
– Cabin backlighting
– Navigation and audio system
– Dome lighting
– Push button backlighting
• Exterior automotive
– Turn signals
– CHMSL
– Rear combination lamp
– Puddle light
• Electronic signs and signals
– Interior and exterior full color
sign
– Variable message sign
– Garden lighting
• Office automation, home appli-
ances, industrial equipment
– Front panel backlighting
– Push button backlighting
– Display backlighting
2
Package Dimensions
0.8 ± 0.3
3.5 ± 0.2
2.8 ± 0.2
0.5 ± 0.1
3.2 ± 0.2
2.2 ± 0.2
1.9 ± 0.2
0.1 TYP. 0.8 ± 0.1
CATHODE MARKING
0.7 ± 0.1
CC
AC
NOTE: ALL DIMENSIONS IN mm.
3
Device Selection Guide
Luminous Intensity
Iv (mcd) @ IF = 50 mA
Color Part Number Dice Technology Min. Typ.
Red HSMC-A400-R00J1[3] AS AlInGaP 100 200
Red HSMC-A401-T00J1[3] AS AlInGaP 250 400
Red Orange HSMJ-A401-T00J1[3] AS AlInGaP 250 500
Orange HSML-A401-U00J1[3] AS AlInGaP 400 700
Amber HSMA-A400-R00J1[3] AS AlInGaP 100 150
Amber HSMA-A401-U00J1[3] AS AlInGaP 400 550
Yellow Green HSME-A400-P02J1 AS AlInGaP 40 100
Yellow Green HSME-A401-Q02J1 AS AlInGaP 63 100
Emerald Green HSME-A400-P01J1 AS AlInGaP 40 70
Luminous Intensity
Iv (mcd) @ IF = 30 mA
Color Part Number Dice Technology Min. Typ.
Green HSMM-A401-R00J1 InGaN 100 280
Cyan HSMK-A401-R00J1 InGaN 100 180
Blue HSMN-A401-N00J1 InGaN 25 80
Notes:
1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be
aligned with this axis.
2. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
3. Designed for Automotive Application.
Absolute Maximum Ratings (TA = 25°C)
Parameters AS AlInGaP InGaN
DC Forward Current[1] 70 mA[3,4] 30 mA
Peak Forward Current [2] 200 mA 90 mA
Power Dissipation 180 mW 114 mW
Reverse Voltage 5 V 5 V
Junction Temperature 110°C 110°C
Operating Temperature –40°C to +100°C –40°C to +100°C
Storage Temperature –40°C to +100°C –40°C to +100°C
Notes:
1. Derate linearly as shown in figure 5.
2. Duty factor = 10%, Frequency = 1 kHz.
3. Drive current between 10 mA and 70 mA is recommended for best long-term performance.
4. Operation at current below 5 mA is not recommended.
4
Optical Characteristic (TA = 25°C)
Peak Dominant Luminous Luminous Intensity/
Wavelength Wavelength Viewing Angle Efficacy ηv[5] Total Flux
Dice λPEAK (nm) λD (nm) 2θ1/2 (Degrees) (lm/W) Iv (mcd)/Φv (mlm)
Color Technology Typ. Typ. Typ. Typ. Typ.
Red AS AlInGaP 635 626 120 150 0.45
Red Orange AS AlInGaP 621 615 120 240 0.45
Orange AS AlInGaP 609 605 120 320 0.45
Amber AS AlInGaP 592 590 120 480 0.45
Yellow Green AS AlInGaP 576 575 120 560 0.45
Emerald Green AS AlInGaP 568 567 120 610 0.45
Green InGaN 518 525 120 500 0.45
Cyan InGaN 502 505 120 300 0.45
Blue InGaN 468 472 120 75 0.45
Notes:
1. The dominant wavelength, λD, is derived from the CIE Chromaticity Diagram and represents the color of the device.
2. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is
the luminous efficacy in lumens/watt.
Electrical Characteristic (TA = 25°C)
Forward Voltage Reverse Voltage
VF (Volts) @ IF = 50 mA VR @ 100 µA
Dice Technology Typ. Max. Min.
AS AlInGaP 2.2 2.5 5
Forward Voltage Reverse Voltage
VF (Volts) @ IF = 30 mA VR @ 10 µA
Dice Technology Typ. Max. Min.
InGaN 3.8 4.6 5
Figure 1. Relative intensity vs. wavelength.
WAVELENGTH – nm
EMERALD GREEN
RELATIVE INTENSITY
1.0
0.8
0380 480 580 680 730 780
630530430
BLUE
CYAN
0.6
0.4
0.2
GREEN
YELLOW GREEN
AMBER
ORANGE
RED ORANGE
RED
0.1
0.3
0.5
0.7
0.9
5
Figure 2. Forward current vs. forward voltage. Figure 3. Relative intensity vs. forward
current (AlInGaP).
Figure 4. Relative intensity vs. forward
current (InGaN).
Figure 5. Maximum forward current vs.
ambient temperature, derated based on
TJmax = 110°C, RθJA = 300°C/W.
Figure 6. Dominant wavelength vs. forward
current – InGaN devices.
Figure 7. Radiation pattern.
0 3.0
FORWARD VOLTAGE – V
0
20
70
80
FORWARD CURRENT – mA
4.5
10
50
40
60
1.0 2.0 4.0
InGaN
AlInGaP
0.5 1.5 2.5 3.5
30
040
FORWARD CURRENT – mA
0
0.4
RELATIVE INTENSITY
(NORMALIZED AT 50 mA)
80
0.8
0.2
1.0
20
0.6
1.2
6010 30 70
1.4
50
020
FORWARD CURRENT – mA
0
0.4
RELATIVE INTENSITY
(NORMALIZED AT 30 mA)
35
0.8
0.2
1.0
10
0.6
1.2
30515
1.6
25
1.4
0
80
020 60 80 120
MAXIMUM FORWARD CURRENT – mA
AMBIENT TEMPERATURE – °C
40
40
60
30
AlInGaP
20
70
100
10 InGaN
50
020
CURRENT – mA
460
480
540
DOMINANT WAVELENGTH – nm
35
500
470
510
10
490
520
25
InGaN GREEN
515 30
530
InGaN CYAN
InGaN BLUE
RELATIVE INTENSITY
1.0
0
ANGLE – DEGREES
0.8
0.6
0.2
0.4
-70 -50 -30 30 50 70 90-90 -10 10
0.1
0.3
0.5
0.7
0.9
6
Figure 9. Recommended reflow soldering profile. Figure 10. Recommended wave soldering profile.
Figure 8a. Recommended soldering pad pattern.
240°C MAX.
20 SEC. MAX.
3°C/SEC.
MAX.
120 SEC. MAX.
TIME
TEMPERATURE
183°C
100-150°C
–6°C/SEC.
MAX.
60-150 SEC.
3°C/SEC. MAX.
240-245°C
10-40 SEC.
2-3°C/SEC.
TIME
TEMPERATURE
ABOVE
183°C
PRE-HEAT 120-180°C
6°C/SEC. MAX.
2.60
SOLDER RESIST
4.50 7.50
3.30
0.40
3.30
0.50
1.10
1.50
DIMENSIONS IN mm.
7.5 (0.295)
3.5 (0.138)
2.8 (0.110) 0.5 (0.020)
3.5 (0.138)
8.0 (0.315)
1.0 (0.039)
2.0 (0.079)
1.5 (0.059)
2.0 (0.079)
2.0 (0.079)
6.0 (0.236)
3.0 (0.118)
2.8 (0.110)
6.1 (0.240)
Figure 8b. Recommended soldering pad pattern (TTW).
7
Figure 11. Tape leader and trailer dimensions.
200 mm MIN. FOR ∅180 REEL.
200 mm MIN. FOR ∅330 REEL.
TRAILER COMPONENT LEADER
480 mm MIN. FOR ∅180 REEL.
960 mm MIN. FOR ∅330 REEL.
C
A
USER FEED DIRECTION
Figure 13. Reeling orientation.
Figure 12. Tape dimensions.
CATHODE SIDE
PRINTED LABEL
USER FEED DIRECTION Storage Condition: 5 to 30°C @
60% relative humidity max.
Baking is required under the
condition:
a) the humidity indicator card
color becoming pink
b) the pack has been opened for
more than 1 week
Baking recommended condition:
60 ± 5°C for 20 hours.
C
A
4 ± 0.1 2 ± 0.05
8 ± 0.1
5.5 ± 0.05
12+0.3
–0.1
1.75 ± 0.1
3.8 ± 0.1
3.6 ± 0.1
0.229 ± 0.01
∅1.5+0.1
–0
∅1+0.1
–0
C
C
3.45 ± 0.1
AA
VIEW A-A
VIEW B-B
B
B
ALL DIMENSIONS IN mm.
Intensity Bin Select (X5X6)
Individual reel will contain parts from
one half bin only.
X5Min. Iv Bin
X6
0 Full Distribution
3 3 half bins starting from X51
4 4 half bins starting from X51
5 5 half bins starting from X51
7 3 half bins starting from X52
8 4 half bins starting from X52
9 5 half bins starting from X52
Intensity Bin Limits
Bin ID Min. (mcd) Max. (mcd)
N1 28.50 35.50
N2 35.50 45.00
P1 45.00 56.00
P2 56.00 71.50
Q1 71.50 90.00
Q2 90.00 112.50
R1 112.50 140.00
R2 140.00 180.00
S1 180.00 224.00
S2 224.00 285.00
T1 285.00 355.00
T2 355.00 450.00
U1 450.00 560.00
U2 560.00 715.00
V1 715.00 900.00
V2 900.00 1125.00
W1 1125.00 1400.00
W2 1400.00 1800.00
Tolerance of each bin limit = ± 12%
Color Bin Select (X7)
Individual reel will contain parts from
one full bin only.
X7
0 Full Distribution
Z A and B only
Y B and C only
W C and D only
V D and E only
U E and F only
T F and G only
S G and H only
Q A, B and C only
P B, C and D only
N C, D and E only
M D, E and F only
L E, F and G only
K F, G and H only
1 A, B, C and D only
2 E, F G and H only
Color Bin Limits
Blue Min. (nm) Max. (nm)
A 460.0 465.0
B 465.0 470.0
C 470.0 475.0
D 475.0 480.0
Cyan Min. (nm) Max. (nm)
A 490.0 495.0
B 495.0 500.0
C 500.0 505.0
D 505.0 510.0
Green Min. (nm) Max. (nm)
A 515.0 520.0
B 520.0 525.0
C 525.0 530.0
D 530.0 535.0
Color Bin Limits
Emerald
Green Min. (nm) Max. (nm)
A 552.5 555.5
B 555.5 558.5
C 558.5 561.5
D 561.5 564.5
Yellow
Green Min. (nm) Max. (nm)
E 564.5 567.5
F 567.5 570.5
G 570.5 573.5
H 573.5 576.5
Amber/
Yellow Min. (nm) Max. (nm)
A 582.0 584.5
B 584.5 587.0
C 587.0 589.5
D 589.5 592.0
E 592.0 594.5
F 594.5 597.0
Orange Min. (nm) Max. (nm)
A 597.0 600.0
B 600.0 603.0
C 603.0 606.0
D 606.0 609.0
E 609.0 612.0
Red
Orange Min. (nm) Max. (nm)
A 611.0 616.0
B 616.0 620.0
Red Min. (nm) Max. (nm)
Full Distribution
Tolerance of each bin limit = ± 1 nm
Packaging Option (X8X9)
X8X9
J1 Top Mount, 7 inch Reel
8
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(408) 654-8675
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6271 2451
India, Australia, New Zealand: (+65) 6271 2394
Japan: (+81 3) 3335-8152(Domestic/Interna-
tional), or 0120-61-1280(Domestic Only)
Korea: (+65) 6271 2194
Malaysia, Singapore: (+65) 6271 2054
Taiwan: (+65) 6271 2654
Data subject to change.
Copyright © 2003 Agilent Technologies, Inc.
March 4, 2003
5988-8320EN
