REV. l AX j TITLE: ONE PLACE DECIMALS +.1[2.54] THREE PLACE DECIMALS + .005[.13] TWO PLACE DECIMALS + .01[.25] FOUR PLACE DECIMALS + .0010[.025] ANGLES 41 imm x imm DOUBLE VERTICAL SMT TERMINAL STRIP WG NO: FTE SHEET 1 TABLE 1 LEAD STYLE 7 02 075 [1.91] =+Cy) -03 .065 [1.65] =C) No OF POS x .03937 [1.000] +.010 [+.25] NO OF POS x 02037 .03937 [1.000 1.000] FTMH1XXXXXXDVXX OPTIONS P: PICK & PLACE PAD (USE PPP30) (USE PPP3O-NT FOR TAPE & REEL) (SEE FIG 3, SHT 3) 02 THRU -50 LEAD Se 02: .075 (USE Ts 60 O3: | 1.65. (USE Ts 6-0. rw) MIN XX-2) PLATING <L: UGHT SELECTIVE (USE T-1816-03-L-2) -F: FLASH SELECTIVE (USE T-1816-03-F2) -H: HEAVY GOLD (USE T-1S16-03-H-2) LM: LIGHT SELECTIVE GOLD, MATTE TIN TAIL (USE T-1S1603-L2) FM: FLASH SELECTIVE GOLD, MATTE TIN TAIL (USE T-1S1603-F2) -G GOLD (USE T-1S16-03-G-2) ROW SPECIFICATION -DV: DOUBLE ROW VERTICAL (USE 6 POS. PER ROW MIN) TTR TAPE & REEL PACKAGING (OUDS (SEE FIG. 2, SHT 2) @ POS. | PER "ROW nan) MOLDED TO POSITION END SHROUDS. (5 POS. PER ROW MIN) (SEE FIG. 2 SHT.2) EP: GUIDE POST (SEE FIG. 4, SHT.3) MIN 9 POS. PER ROW SE ONLY WHEN MATING WITH A CLM) EC: (9 A: POS. PER ROW Mi ALIGNMENT PIN (SEE FIG. 6 & 7, SHT 4) MOLDED TO POSITION (3 POSITIONS PER ROW MIN.) MOLDED TO POSITION WITH END SHROUDS (6 POS. PER ROW MIN) LOCKING CUP (SEE un 5, SHT. 3XSEE NOTE 10) 'SAMTEC DISCRETION ON WHICH A PIN IS USED) MOLD 3 POSITION MIN, USE FTMH750XxX) STAKE 7 POSITION MIN, USE FTMH60D) 2" MAX. SWAY .0120 [.305] SQ REF | [72 BG TOE if T181803XX2 os \ [1,000.10] eesees Hf) fl Leon At (SEE TABLE 1) @/ ee a4 __141@ -0585_ REF 0705428 [1.791413 OOO Ao OM Ooo | [1.486] [es ].004 C101] eu uU Uo ou obo Uo Uo uU Uo ou obo Uo Uo ' S |.004 [.10] 4 i ) NOTES: oN SEE NOTE 7 J 1. PARTS MAY BE CUT TO POSITION. SEE NOTE 8 O40 [1.02] REF 2. SHEAR TAILS TO DIMENSION SHOWN. (2 PLCS) ) 3. MEASURED AT BEND RADIUS, NOT AT END OF PIN. Le 205+ .008 4. GOLD PLATING TO BE ON POST, TIN PLATING TO BE ON TAIL. [5.214 20] 5. (C) REPRESENTS A CRITICAL DIMENSION. FIG, 1 TABLE 2: *SEE NOTE 9 FOR PACKAGING NOTES* Coma MINIMUM FUSHOUT FORCE: 1.0 LB = 16 OZ. LEAD STYLE| __OPTION (S) PACKAGING TUBE TUBE PLUG 7. .003 [.08] MAXIMUM BURR. 02 NONE 1 = ; 010 [25] MAXIMUM CUT FLASH. PT-1= 24-02-49 | _TP=12 (2 REQ*D) 9. POSITIONS 2-4 TO BE LAYER PACKAGED & 02, 03 A PT1-2401-60 | _TP03 (2 REQ'D) 10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE EC OPTION 02, 03 P, A-P PT-12401-43 | _1P24 (2 REQ) (S NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS = = = = MANUAL PLACEMENT FOR ALL ASSEMBLIES WTH THE EC OPTION. o3 5 PT-1-24-0249 |_TP30 (2 REGD) -02, -03 eA oe PT1-2401-63 | 1P2402 (2 REQ'D) -02, -03 cop we cua | PT-1-24-01-60 | TP-09 (2 REGD) DO NOT SCALE 02, 03_| EPA, -EP-A-P_| PT1-2402-15 | __TPO3 (2 REQD) MATERIAL: EE Fate TERMINAL: PHOSPHOR BRONZE INSULATOR: BLACK LIQUID CRYSTAL POLYMER am 520 PARK EAST PHONE. (812) a BLVD. NEW ALBANY,INOIANA 47150 944-6733 CODE 55322 P.O. BOX 1147 PURVIS 04-22-96 FIM 1XX-XX-XX-DV-XX sheet 1 of 4 |ime: DWG NO: REV. | AX | OMENONE ARE 1 DICHER OLEACEAE: Imm x 1mm ONE PLACE DECIMALS +.1[2.5] THREE PLACE DECIMALS +.008[.13] | ANGLES DOUBLE VERTICAL FTMH1XX-XX-XX-DV-XX TWO PLACE DECIMALS .01[.25] FOUR PLACE DEGIMALS +.0020[.051] |+2 |SMT TERMINAL STRIP SHEET 20F 4 @ (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1) ) (NO OF POSITIONS + 2) x.0393742% ~ [- (Ne OF Pos 1) x .03937 [1.000] *25 E25] [1.000+ 33, ] (No OF POS x .03937 [1.000] + .021 [.52] REF | i {(No OF POS + 2) x .03037 [1.000] 2% [13] SSA AHA LS 00000 ne BHHEEBRBEEEREEEEE BBBEABBBABABBABAB 175 [445] REF T-1S16-03-X-2 FTMH-75ES-XX | | eset ax Oh LNLON0 00000 (i [3.84] = 7 i ro ; ES OPTION -ES OPTION SNAP ON SHROUDS MOLDED SHROUDS ll 7) oo a ee <UEVhi UE 1 OERBBEEOOREEBEEOOREREREEOORBEEEEOOSEEEEDOOEEEEEOOREEEEEOOEREEEEEOORREEEOOREEEEOUOGHEE OBR RFRFRBODOBBRBBAODABBABAODBBBBBOOABBBBBOOBABABADODEBABBEOODBBABEBOODBBABBBOOCABABABOOBBAB SS ES oo oo eo | SS SS SS OS SS ool U THEORETICAL CUT LINES FTMH-105XXXXDVES SHOWN (BEFORE CUT) pL eS ef eS fe=S LLLD HEBEBEEEEEE HEBEEEEEEE BHBEEEEE BEABRBBBBBBODBBBABBBBBBBODCBBABBABBABBABOO = SST 1 = FTMH110XXXXDVES SHOWN (BEFORE CUT) THEORETICAL CUT LINES LOOT 1 ff 000001 1 fl fe OGRGHEHERBEEPERBEERBOUGHEEHEREEEREEa HHBEEEBEEEEEEOO HHBEBEEEBEEEEEEGO OBB BFBBBRBRBeBeBRee BBEBABABBABAABBEB BEBRBBRBABABBBE BEBRBBBABBBBABE BEABBBAABBBBBBsL SST eS THEORETICAL CUT LINES FTMH113XXXXDVES SHOWN (BEFORE CUT) sar mec we Dl Es ae ee 2 PAE Tn wun home ta 2 Gare BY: ec ae PURVS 04-22-96 | FTMH-1 XX-XX-XX-DVEXX REV. AX | i |s} 125 [3.18] UNLESS ONGRVSE NORD Time: DWG NO: ONE PLACE DECIMALS +.1[2.5] THREE PLACE DECIMALS +.005[.13] | ANGLES DOUBLE VERTICAL FIMH-TXX-XX-XX-DV-AKX TWO PLACE DECMALS +.01[.25] FOUR PLACE DECIMALS +.0020[.051] | + 2 SMT TERMINAL STRIP SHEET 3 OF 4 FIG. 4 (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1) _ NO. OF POS. x PPBd0 + 216 __t 1.000] (Bag) ka .075 DIA [1.91] NO. OF POS. x .03937 + .137 | [1.000] [3.47] \ FIG. 3 were ny (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1) -122 [3.10] REF NOTE: mw * USED MEASURED DIMENSION <REF> (250 REF JI& we PY = CM? 200 (5.08) / 2} 4,020 C51] [6.35] [a9 4] fF CSEE NOTE) & | w P* (SEE NOTED reo oo ud Toodroo oo _ a (eo | 7 r (SEE TABLE 3) ~| .275 [6.99] REF EP OPTION (USE ONLY WHEN MATING WITH CLM) | TABLE 3 | PART NOL | "BS FIG. 5 PPP-30 | .125(3.18] (DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG. 1) PPP-30-NT | .1904.83] t P OPTION > NO. OF POS x .03937 + .160 [1.000] [4.07] 170 4,32] | >| .151 [3.84] Ar - 023 REF [.58] [2.84] EC OPTION Samlec ~ ARK EAST BLVD. NEW ALBANY, INDIANA 4750 PRONE (812) 944-6733 P.O. BOX 1 CODE 553522 | FTMH-1XXXX-XX-DVXX sheet _3 of 4 FTMH-EC .070+.005 [1.778+.127] | NO. OF POS. x .03937 + .110 [1.000] PURVIS 04-22-96 _ Seas ma oo ae cara [oa | DOUBLE ERICA, FMD / BRAGA BAe L 4 Ww WU & (No. OF POS 2) x .03937 __.| .028 [.71] REF FIC. 6 SMA7H a.025 [.63] DIA A OPTION (STAKED) MIN 7 POSITIONS FOR STAKING fo SSAA AOA poo (No. OF FINISHED POS 2) x .03937 __. -025 [.64] nerf K I FULL RADIUS ~| be .025 [.64] DIA FIG. 7 A OPTION (MOLDED) es offs ee Tenet emis (3 POS MIN) Samlec ==> cee JONES. 12-03-96 FIMH-TXX-XX-X-DVEXK