74LVCE1G08W5-7 - DIODES INC. - Datasheet.Directory

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 1 of 14

www.diodes.com December 2010

NEW PRODUCT

Description

The 74LVCE1G 08 is a sin gle 2-input p ositiv e AND gate with a

standard totem pole output. The device is designed for

operation with a power supply range of 1.4V to 5.5V. The

inputs are tolerant to 5.5V allowing th is device to be used in a

mixed voltage environment. The device is fully specified for

partial power down applications using IOFF. The IOFF circuitry

disables the output preventing damaging current backflow

when the device is powered down.

The gate performs the positive Boolean function:

B

A

Y•= or B

A

Y+=

Features

• Extended Supply Voltage Range from 1.4 to 5.5V

• Switching speed characterized for operation at 1.5V

• Offers 30% speed improvement over LVC at 1.8V.

• ± 24mA Output Drive at 3.3V

• CMOS low power consumption

• IOFF Supports Partial-Power-Down Mode Operation

• Inputs accept up to 5.5V

• ESD Protection Tested per JESD 22

Exceeds 200-V Machine Model (A115-A)

Exceeds 2000-V Human Body Model (A114-A)

• Latch-Up Exceeds 100mA per JESD 78, Class II

• Range of Package Options

• Direct Interface with TTL Levels

• SOT25, SOT353, and DFN14 10:

Available in “Green” Molding Compound (no Br, Sb)

• Lead Free Finish/ RoHS Com pliant (Note 1)

Pin Assignments

SOT25 / SOT353

A

GND Y

Vcc

(Top View)

5

43

2

1

B

2

3

(Top View)

DFN1410 (Note 2)

A

B

GND Y

Vcc

NC

4

6

5

1

Applications

• Voltage Level Shifting

• General Purpose Logic

• Wide array of products such as.

o PCs, networking, notebooks, netbooks, PDAs

o Computer peripherals, hard drives, CD/DVD ROM

o TV, DVD, DVR, set top box

o Cell Phones, Personal Navig ation / GPS

o MP3 players ,Cameras, Video Recorders

Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at

http://www.diodes.com/products/lead_free.html.

2. Pin 2 and pin 5 of the DFN1410 package are internally connected.

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 2 of 14

www.diodes.com December 2010

NEW PRODUCT

Pin Descriptions

Pin Name Description

A Data Input

B Data Input

GND Ground

Y Data Output

Vcc Supply Voltage

Logic Diagram

Function Table

Inputs Output

A B Y

H H H

L X L

X L L

1

A 2 4 Y

B

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 3 of 14

www.diodes.com December 2010

NEW PRODUCT

Absolute Maximum Ratings (Note 3)

Symbol Description Rating Unit

ESD HBM Human Body Model ESD Protection 2 KV

ESD MM Machine Model ESD Protection 200 V

VCC Supply Voltage Range -0.5 to 6.5 V

VI Input Voltage Range -0.5 to 6.5 V

Vo Voltage applied to output in high impedance or IOFF state -0.5 to 6.5 V

Vo Voltage applied to output in high or low state -0.3 to VCC +0.5 V

IIK Input Clamp Current VI<0 -50 mA

IOK Output Clamp Current -50 mA

IO Continuous output current ±50 mA

Continuous current through Vdd or GND ±100 mA

TJ Operating Junction Temperature -40 to 150 °C

TSTG Storage Temperature -65 to 150 °C

Note: 3. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device

operation should be within recommend values.

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 4 of 14

www.diodes.com December 2010

NEW PRODUCT

Recommended Operating Conditions (Note 4)

Symbol Parameter Min Max Unit

VCC Operating Voltage Operating 1.4 5.5 V

Data retention only 1.2 V

VIH High-level Input Voltage

VCC = 1.4 V to 1.95 V 0.65 X VCC

V

VCC = 2.3 V to 2.7 V 1.7

VCC = 3 V to 3.6 V 2

VCC = 4.5 V to 5.5 V 0.7 X VCC

VIL Low-level input voltage

VCC = 1.4 V to 1.95 V 0.35 X VCC

V

VCC = 2.3 V to 2.7 V 0.7

VCC = 3 V to 3.6 V 0.8

VCC = 4.5 V to 5.5 V 0.3 X VCC

VI Input Voltage 0 5.5 V

VO Output Voltage 0 VCC V

IOH High-level output current

Vcc=1.4 V -3

mA

VCC = 1.65 V -4

VCC = 2.3 V -8

VCC = 3 V -16

-24

VCC = 4.5 V -32

IOL Low-level output current

Vcc=1.4 V 3

mA

VCC = 1.65 V 4

VCC = 2.3 V 8

VCC = 3 V 16

24

VCC = 4.5 V 32

Δt/ΔV Input transition rise or fall

rate

VCC = 1.4 to 3V 20

ns/V

VCC = 3.3 V ± 0.3 V 10

VCC = 5 V ± 0.5 V 5

TA Operating free-air

temperature -40 85 ºC

Note: 4. Unused inputs should be held at Vcc or Ground.

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 5 of 14

www.diodes.com December 2010

NEW PRODUCT

Electrical Characteristics (All typical values are at Vcc = 3.3V, TA = 25°C)

Over recommende d free-air temperature range (unl ess otherwise noted)

Symbol Parameter Test Conditions Vcc Min Typ. Max Unit

VOH High Level Output

Voltage

IOH = -100μA 1.4 V to 5.5V VCC – 0.1

V

IOH = -3mA 1.4 V 1.05

IOH = -4mA 1.65 V 1.2

IOH = -8mA 2.3V 1.9

IOH = -16mA 3 V 2.4

IOH = -24mA 2.3

IOH = -32mA 4.5 V 3.8

VOL High-level Input Voltage

IOL = 100μA 1.4 V to 5.5V 0.1

V

IOL = 3mA 1.4 V .4

IOL = 4mA 1.65 V 0.45

IOL = 8mA 2.3V 0.3

IOL = 16mA 3 V 0.4

IOL = 24mA 0.55

IOL = 32mA 4.5 0.55

II Input Current VI = 5.5 V or GND 0 to 5.5 V ± 5 μA

IOFF Power Down Leakage

Current VI or VO = 5.5V 0

± 10 μA

ICC Supply Current VI = 5.5V of GND

IO=0 1.4 V to 5.5V 10 μA

ΔICC Additional Supply

Current

One input at VCC –

0.6 V Other inputs

at VCC or GND 3 V to 5.5V 500 μA

Ci Input Capacitance Vi = VCC – or GND 3.3 3.5 pF

θJA Thermal Resistance

Junction-to-Ambient

SOT25 (Note 5) 204

oC/W

SOT353 (Note 5) 371

DFN1410 (Note 5) 430

θJC Thermal Resistance

Junction-to-Case

SOT25 (Note 5) 52

oC/W

SOT353 (Note 5) 143

DFN1410 (Note 5) 190

Note: 5. Test condition for SOT25, SOT353, and DFN1410: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum

recommended pad layout.

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 6 of 14

www.diodes.com December 2010

NEW PRODUCT

Switching Characteristics

Over recommended free -air temperature range, CL = 15pF (see Figure 1 )

Parameter From

(Input) TO

(OUTPUT)

Vcc = 1.5 V

± 0.1V Vcc = 1.8 V

± 0.15V Vcc = 2.5 V

± 0.2V Vcc = 3.3 V

± 0.3V Vcc = 5 V

± 0.5V Unit

Min Max Min Max Min Max Min Max Min Max

tpd A or B Y 1.5 7.2 1.0 5 0.5 3.5 0.6 2.9 0.7 2.9 ns

Over recommende d free-air temperature range, CL = 30 or 50pF as noted (see Figure 2)

Parameter From

(Input) TO

(OUTPUT)

Vcc = 1.5 V

± 0.1V Vcc = 1.8 V

± 0.15V Vcc = 2.5 V

± 0.2V Vcc = 3.3 V

± 0.3V Vcc = 5 V

± 0.5V Unit

Min Max Min Max Min Max Min Max Min Max

tpd A or B Y 2.4 8 1.6 5.6 0.8 4.4 0.8 3.6 0.9 3.6 ns

Operating Characteristics

TA = 25 ºC

Parameter Test

Conditions Vcc = 1.5 V Vcc = 1.8 V Vcc = 2.5 V Vcc = 3.3 V Vcc = 5 V Unit

TYP TYP TYP TYP TYP

Cpd Power

dissipation

capacitance f = 10 MHz 21 21 24 26 31 pF

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 7 of 14

www.diodes.com December 2010

NEW PRODUCT

Parameter Measurement Information

Vcc Inputs VM CL RL

VI tr/tf

1.5V±0.1V VCC ≤2ns VCC/2 15pF 1MΩ

1.8V±0.15V VCC ≤2ns VCC/2 15pF 1MΩ

2.5V±0.2V VCC ≤2ns VCC/2 15pF 1MΩ

3.3V±0.3V 3V ≤2.5ns 1.5V 15pF 1MΩ

5V±0.5V VCC ≤2.5ns VCC/2 15pF 1MΩ

Voltage Waveform

Pulse Duration

Voltage Waveform

Propagation Delay Times

Inverting and Non Inverting Outputs

Notes: A. Includes test lead and test apparatus capacitance.

B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.

C. Inputs are measured separately one transition per measurement.

D. tPLH and tPHL are the same as tPD.

Figure 1. Load Circuit and Voltage Waveforms

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 8 of 14

www.diodes.com December 2010

NEW PRODUCT

Parameter Measurement Information (Continued)

Vcc Inputs VM CL RL

VI tr/tf

1.5V±0.1V VCC ≤2ns VCC/2 30pF 1KΩ

1.8V±0.15V VCC ≤2ns VCC/2 30pF 1KΩ

2.5V±0.2V VCC ≤2ns VCC/2 30pF 500Ω

3.3V±0.3V 3V ≤2.5ns 1.5V 50pF 500Ω

5V±0.5V VCC ≤2.5ns VCC/2 50pF 500Ω

Voltage Waveform

Pulse Duration

Voltage Waveform

Propagation Delay Times

Inverting and Non Inverting Outputs

Notes: A. Includes test lead and test apparatus capacitance.

B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.

C. Inputs are measured separately one transition per measurement.

D. tPLH and tPHL are the same as tPD.

Figure 2. Load Circuit and Voltage Waveforms

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 9 of 14

www.diodes.com December 2010

NEW PRODUCT

Ordering Information

Device Package

Code Packaging

(Note 5) 7” Tape and Reel

Quantity Part Number Suffix

74LVCE1G08W5-7 W6 SOT25 3000/Tape & Reel -7

74LVCE1G08SE-7 SE SOT353 3000/Tape & Reel -7

74LVCE1G08FZ4-7 FZ4 DFN1410 5000/Tape & Reel -7

Note: 6. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at

http://www.diodes.com/datasheets/ap02001.pdf.

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 10 of 14

www.diodes.com December 2010

NEW PRODUCT

Marking Information

(1) SOT25 and SOT353

1 2 3

5

7

4

XX YW X

XX : Identification code

W : Week : A~Z : 1~26 week;

X : A~Z : Internal code

(Top View)

Y : Year 0~9

a~z : 27~52 week; z represents

52 and 53 week

Part Number Package Identification Code

74LVCE1G08W5 SOT25 PV

74LVCE1G08SE SOT353 PU

(2) DFN1410H4-6

Y : Year : 0~9

(Top View)

X : A~Z : Intern a l cod e

Y W X

XX XX : Identification Code

W : Week : A~Z : 1~26 week;

a~z : 27~52 week; z represents

52 and 53 week

Part Number Package Identification Code

74LVCE1G08FZ4 DFN1410 PV

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 11 of 14

www.diodes.com December 2010

NEW PRODUCT

Package Outline Dimensions (All Dimensions in mm)

(1) Package Type: SOT25

(2) Package Type: SOT353

C

L

C

L

0.10/0.30

1.15/1.35

2.0/2.2

0.65Bsc.

1.8/2.2

0/0.1 0.9/1.0

1.10Max.

0.1/0.22

"A"

Detail"A"

Gauge Plane

0.25/0.40

C

L

C

L

1.9

C

L

6x-0.60

6x-0.42

0.40/0.45

Land Pattern Recommendation

(unit:mm)

0.25

0°/8°

PIN 1

2x-0.65

1.3

Top View

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 12 of 14

www.diodes.com December 2010

NEW PRODUCT

Package Outline Dimensions (All Dimensions in mm)

(3) Package Type: DFN1410

Bottom View

Side View

1.35/1.45

0.95/1.05

0.50Typ.

6x-0.25/0.35

0.40Max.

0.13Typ.

(Pin #1 ID)

0.10 C

0.08 C Seating Plane

A

B

C

0.10 CAB

0.25 A

2X- 0.25 B

2X-

0.10(4x)

6x-

0/0.05

6x-0.15/0.25

0.075¡ Ó0.030

C0.1x45¢X

Top View

(mm)

Land Pattern Recommendation

6x-0.35

0.550

6x-0.25

4x-0.50Typ.

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 13 of 14

www.diodes.com December 2010

NEW PRODUCT

Taping Orientation (Note 7)

For DFN1410

Note: 7. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf

74LVCE1G08

SINGLE 2 INPUT POSITIVE AND GATE

74LVCE1G08

Document number: DS32213 Rev. 2 - 2 14 of 14

www.diodes.com December 2010

NEW PRODUCT

IMPORTANT NOTICE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS

DOCUMENT, INCLUDING, BUT N OT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhanc ements, improvements, corrections or other

changes without further notice to this document and any product described herein. Diodes Incorporat ed does not assume an y liability

arising out of the application or use of this docum ent or any product described herein; neither does Diodes Incorporated convey an y

license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or p roducts described

herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies

whose products are represented on Diodes Incorporated website, harmless against all damages.

Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized

sales channel.

Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall

indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees

arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.

Products described herein may be covered by on e or more United States, international or foreign patents pe nding. Product names

and markings noted herein may also be covered by one or more United States, international or foreign trademarks.

LIFE SUPPORT

Diodes Incorporated products are specifically not authorized for use as critical components in life support devic es or systems without

the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:

A. Life support devices or systems are devices or systems which:

1. are intended to implant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided

in the labeling can be reasonably expected to result in significant injury to the user.

B. A critical component is any component in a life support device or system whose failure to perform can b e reasonably expected

to cause the failure of the life support device or to affect its safety or effectiveness.

Customers represent that they ha ve all necessary expertise in the safety and regulatory ramifications of their life support dev ices or

systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements

concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,

notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,

Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes

Incorporated products in such safety-critical, life support devices or systems.

www.diodes.com