ZMD1 ... ZMD100 ZMD1 ... ZMD100 Ptot = 1 W VZ = 1 V ... 100 V Tjmax = 175C SMD Zener Diodes (non-planar technology) Flachendiffundierte SMD Zener-Dioden Version 2017-01-20 0.4 0.4 3.5 Besonderheiten Hohe Leistungsfahigkeit VZ bis zu 100 V Konform zu RoHS, REACH, Konfliktmineralien 1) RoHS Pb EE WE Features High power dissipation VZ up to 100 V Compliant to RoHS, REACH, Conflict Minerals 1) Typische Anwendungen Spannungsstabilisierung und -regler (Fur Uberspannungsschutz - uni-und bidirektional - siehe TVS-Diodenreihe TGL34) Standardausfuhrung 1) EL V 1.6 ~ DO-213AA Plastic MiniMELF Typical Applications Voltage stabilization and regulators (For overvoltage protection - uni- and bi-directional - see TVS diodes TGL34 series) Commercial grade 1) Mechanical Data 1) Taped and reeled Weight approx. Dimensions - Mae [mm] Mechanische Daten 1) 2500 / 7" Gegurtet auf Rolle 0.04 g Gewicht ca. Case material UL 94V-0 Gehausematerial Solder & assembly conditions 260C/10s Lot- und Einbaubedingungen MSL = 1 Marking: One blue ring denotes "cathode" and "Z-Diode family" The type numbers are noted only on the label on the reel Kennzeichnung: Ein blauer Ring kennzeichnet "Kathode" und "Z-Dioden-Familie" Die Typenbezeichnungen sind nur auf dem Rollenaufkleber vermerkt Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard. Other voltage tolerances and higher Zener voltages on request. Die Toleranz der Zener-Spannung ist in der Standard-Ausfuhrung gestuft nach der internationalen Reihe E 24 (~5%). Andere Toleranzen oder hohere Arbeitsspannungen auf Anfrage. Maximum ratings 2) Grenzwerte 2) Power dissipation - Verlustleistung Ptot 1 W 3) Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS -50...+175C -50...+175C Characteristics Kennwerte Thermal resistance junction to ambient Warmewiderstand Sperrschicht - Umgebung RthA < 75 K/W 3) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss RthT < 40 K/W Zener voltages see table on next page - Zener-Spannungen siehe Tabelle auf der nachsten Seite 45 1 2 3 4 5 Please note the detailed information on our website or at the beginning of the data book Bitte beachten Sie die detaillierten Hinweise auf unserer Internetseite bzw. am Anfang des Datenbuches TA = 25C unless otherwise specified - Tj = 25C wenn nicht anders angegeben Mounted on P.C. board with 25 mm2 copper pads per terrminal - Montage auf Leiterplatte mit 25 mm2 Lotpads an jedem Anschluss Tested with pulses - Gemessen mit Impulsen The ZMD1 is a diode operated in forward mode. Hence, the index of all parameters should be "F" instead of "Z". The cathode, indicated by a blue ring, has to be connected to the negative pole. Die ZMD1 ist eine in Durchlass betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index "F" anstatt "Z" zu setzten. Die mit blauem Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden. (c) Diotec Semiconductor AG http://www.diotec.com/ 1 ZMD1 ... ZMD100 Characteristics Kennwerte (Tj = 25C unless otherwise specified) Zener voltage 4) Zener-Spanng. 4) IZ = 5 mA Type Typ Vzmin [V] Vzmax [V] (Tj = 25C wenn nicht anders spezifiziert) Dynamic resistance Inhar. diff. Widerstand rzj [] at f = 1 kHz Temp. Coeffic. of Z-voltage ...der Z-spanng. Reverse volt. Sperrspanng. IR = 500 nA Z-current 3) Z-Strom 3) TA = 50C IZ = 5 mA IZ = 1 mA VZ [10-4 /C] VR [V] IZmax [mA] ZMD1 ) 0.71 0.82 6.5 (<8) - -26...-23 - 500 ZMD3.9 3.7 4.1 80 (<95) - -9...-4 - 244 ZMD4.3 4.0 4.6 80 (<95) - -9...-3 - 217 ZMD4.7 4.4 5.0 70 (<78) < 1400 -8...-3 - 200 ZMD5.1 4.8 5.4 30 (<60) < 700 -8...-3 > 0.5 (1 A) 185 ZMD5.6 5.2 6.0 10 (<40) < 500 -7...-3 > 1 (1 A) 167 ZMD6.2 5.8 6.6 4.8 (<11) < 300 -6...-1 > 1.5 (1 A) 152 ZMD6.8 6.4 7.2 4.5 (<10) < 300 -5...+2 > 2 (1 A) 139 ZMD7.5 7.0 7.9 4.0 (<8) < 100 -3...+4 > 3.5 127 ZMD8.2 7.7 8.7 4.5 (<10) < 50 -2...+6 >5 115 ZMD9.1 8.5 9.6 4.8 (<11) < 50 -1...+7 >6 104 ZMD10 9.4 10.6 5.2 (<15) < 70 +2...+7 >7 94 ZMD11 10.4 11.6 6 (<20) < 70 +3...+7 >7 86 ZMD12 11.4 12.7 7 (<20) < 90 +4...+7 >8 79 ZMD13 12.4 14.1 9 (<25) < 110 +5...+8 >9 71 ZMD15 13.8 15.6 11 (<30) < 110 +5...+8 > 10 64 ZMD16 15.3 17.1 13 (<40) < 170 +5...+9 > 11 58 ZMD18 16.8 19.1 18 (<50) < 170 +6...+9 > 12 52 ZMD20 18.8 21.2 20 (<50) < 220 +7...+9 > 13 47 ZMD22 20.8 23.3 25 (<55) < 220 +7...+9 > 15 43 ZMD24 22.8 25.6 28 (<80) < 220 +7...+9.5 > 16 39 ZMD27 25.1 28.9 30 (<80) < 250 +8...+9.5 > 18 35 ZMD30 28 32 35 (<80) < 250 +8...+9.5 > 20 31 ZMD33 31 35 40 (<80) < 250 +8...+10 > 22 29 ZMD36 34 38 40 (<90) < 300 +8...+10 > 24 26 ZMD39 37 41 50 (<90) < 500 +8...+10 > 26 24 ZMD43 40 46 60 (<100) < 700 +8...+10 > 28 22 ZMD47 44 50 70 (<100) < 750 +8...+10 > 31 20 ZMD51 48 54 70 (<100) < 750 +8...+10 > 34 19 ZMD56 52 60 70 (<100) < 750 +9...+11 > 36 17 ZMD62 58 66 80 (<110) < 750 +9...+11 > 41 15 ZMD68 64 72 90 (<140) < 750 +9...+12 > 45 14 ZMD75 70 79 95 (<150) < 750 +9...+12 > 49 13 ZMD82 77 88 100 (<170) < 750 +9...+12 > 54 11 ZMD91 85 96 130 (<200) < 800 +10...+12 > 59 10 ZMD100 94 106 200 (<300) < 800 +10...+12 > 66 9 5 3,4,5 Disclaimer: See data book page 2 or website - Haftungssauschluss: Siehe Datenbuch Seite 2 oder Internet 3,4,5 Notes see previous page - Funoten siehe vorhergehende Seite 2 http://www.diotec.com/ (c) Diotec Semiconductor AG