MM74HCT74 Dual D-Type Flip-Flop with Preset and Clear Features General Description Typical propagation delay: 20ns The MM74HCT74 utilizes advanced silicon-gate CMOS technology to achieve operation speeds similar to the equivalent LS-TTL part. It possesses the high noise immunity and low power consumption of standard CMOS integrated circuits, along with the ability to drive 10 LS-TTL loads. Low quiescent current: 40A maximum (74HCT Series) Low input current: 1A maximum Fanout of 10 LS-TTL loads Meta-stable hardened This flip-flop has independent data, preset, clear, and clock inputs and Q and Q outputs. The logic level present at the data input is transferred to the output during the positive-going transition of the clock pulse. Preset and clear are independent of the clock and accomplished by a low level at the appropriate input. The 74HCT logic family is functionally and pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground. MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs. Ordering Information Package Number Package Description MM74HCT74M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow MM74HCT74SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Order Number MM74HCT74MTC MM74HCT74N MTC14 N14A 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Device also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. (c)1984 Fairchild Semiconductor Corporation MM74HCT74 Rev. 1.4.0 www.fairchildsemi.com MM74HCT74 -- Dual D-Type Flip-Flop with Preset and Clear March 2008 Truth Table Pin Assignments for DIP, SOIC, SOP and TSSOP Inputs Outputs PR CLR CLK D Q Q L H X X H L H L X X L H H(1) L L X X H(1) H H H H L H H L L H H H L X Q0 Q0 Q0 = the level of Q before the indicated input conditions were established. Note: 1. This configuration is nonstable; that is, it will not persist when preset and clear inputs return to their inactive (HIGH) level. Logic Diagram (c)1984 Fairchild Semiconductor Corporation MM74HCT74 Rev. 1.4.0 www.fairchildsemi.com 2 MM74HCT74 -- Dual D-Type Flip-Flop with Preset and Clear Connection Diagram Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Rating VCC Supply Voltage VIN DC Input Voltage -1.5 to VCC +1.5V DC Output Voltage -0.5 to VCC +0.5V VOUT IIK, IOK -0.5 to +7.0V Clamp Diode Current 20mA IOUT DC Output Current, per pin 25mA ICC DC VCC or GND Current, per pin 50mA TSTG PD TL Storage Temperature Range -65C to +150C Power Dissipation Note 3 S.O. Package only 600mW 500mW Lead Temperature (Soldering 10 seconds) 260C Notes: 2. Unless otherwise specified all voltages are referenced to ground. 3. Power Dissipation temperature derating -- plastic "N" package: -12 mW/C from 65C to 85C. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC VIN, VOUT TA tr , tf Parameter Supply Voltage DC Input or Output Voltage Operating Temperature Range Input Rise or Fall Times (c)1984 Fairchild Semiconductor Corporation MM74HCT74 Rev. 1.4.0 Min. Max. Units 4.5 5.5 V 0 VCC V -40 +85 C 500 ns www.fairchildsemi.com 3 MM74HCT74 -- Dual D-Type Flip-Flop with Preset and Clear Absolute Maximum Ratings(2) VCC = 5V 10% (unless otherwise specified). TA = -40C to 85C 25C Symbol Parameter Conditions Typ. -55C to 125C Guaranteed Limits Units VIH Minimum HIGH Level Input Voltage 2.0 2.0 2.0 V VIL Maximum LOW Level Input Voltage 0.8 0.8 0.8 V VOH Minimum HIGH Level Output Voltage V VOL Maximum LOW Level Voltage VIN = VIH or VIL, |IOUT| = 20A VCC VCC - 0.1 VCC - 0.1 VCC - 0.1 VIN = VIH or VIL, |IOUT| = 4.0mA, VCC = 4.5V 4.2 3.98 3.84 3.7 VIN = VIH or VIL, |IOUT| = 4.8mA, VCC = 5.5V 5.2 4.98 4.84 4.7 0 0.1 0.1 0.1 VIN = VIH or VIL, |IOUT| = 4.0mA, VCC = 4.5V 0.2 0.26 0.33 0.4 VIN = VIH or VIL, |IOUT| = 4.8mA, VCC = 5.5V 0.2 0.26 0.33 0.4 VIN = VIH or VIL, |IOUT| = 20A V IIN Maximum Input Current VIN = VCC or GND, VIH or VIL 0.5 0.5 1.0 A ICC Maximum Quiescent Supply Current VIN = VCC or GND, IOUT = 0A 2.0 20 80 A VIN = 2.4V or 0.5V 0.3 0.4 0.5 mA Typ. Guaranteed Limit Units (4) Note: 4. This is measured per pin. All other inputs are held at VCC Ground. AC Electrical Characteristics VCC = 5V, TA = 25C, CL = 15 pF, tr = tf = 6ns. Symbol Parameter fMAX Maximum Operating Frequency from Clock to Q or Q 50 30 MHz tPHL, tPLH Maximum Propagation Delay Clock to Q or Q 18 30 ns tPHL, tPLH Maximum Propagation Delay from Preset or Clear to Q or Q 18 30 ns Minimum Removal Time, Preset or Clear to Clock 20 ns tS Minimum Setup Time Data to Clock 20 ns tH Minimum Hold Time Clock to Data -3 0 ns tW Minimum Pulse Width Clock, Preset or Clear 8 16 ns tREM (c)1984 Fairchild Semiconductor Corporation MM74HCT74 Rev. 1.4.0 Conditions www.fairchildsemi.com 4 MM74HCT74 -- Dual D-Type Flip-Flop with Preset and Clear DC Electrical Characteristics VCC = 5.0V 10%, CL = 50 pF, tr = tf = 6ns unless otherwise specified. TA = 25C Symbol fMAX Parameter Conditions Typ. Maximum Operating Frequency TA = -40 to +85C Guaranteed Limits Units 27 21 MHz tPHL, tPLH Maximum Propagation Delay from Clock to Q or Q 21 35 44 ns tPHL, tPLH Maximum Propagation Delay from Preset or Clear to Q or Q 21 35 44 ns tREM Minimum Removal Time Preset or Clear to Clock 20 25 ns tS Minimum Setup Time Data to Clock 20 25 ns tH Minimum Hold Time Clock to Data -3 0 0 ns tW Minimum Pulse Width Clock, Preset or Clear 9 16 20 ns tr, tf Maximum Clock Input Rise and Fall Time 500 500 ns tTHL, tTLH Maximum Output Rise and Fall Time 15 19 ns CPD Power Dissipation Capacitance(5) CIN Maximum Input Capacitance (per flip-flop) 10 5 pF 10 10 pF Note: 5. CPD determines the no load dynamic power consumption, PD = CPD VCC2 f + ICC VCC, and the no load dynamic current consumption, IS = CPD VCC f + ICC . (c)1984 Fairchild Semiconductor Corporation MM74HCT74 Rev. 1.4.0 www.fairchildsemi.com 5 MM74HCT74 -- Dual D-Type Flip-Flop with Preset and Clear AC Electrical Characteristics 8.75 8.50 0.65 A 7.62 14 8 B 5.60 4.00 3.80 6.00 PIN ONE INDICATOR 1 1.70 7 0.51 0.35 1.27 0.25 (0.33) 1.75 MAX 1.50 1.25 1.27 LAND PATTERN RECOMMENDATION M C B A SEE DETAIL A 0.25 0.10 C 0.25 0.19 0.10 C NOTES: UNLESS OTHERWISE SPECIFIED A) THIS PACKAGE CONFORMS TO JEDEC MS-012, VARIATION AB, ISSUE C, B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD GAGE PLANE FLASH OR BURRS. D) LANDPATTERN STANDARD: SOIC127P600X145-14M 0.36 E) DRAWING CONFORMS TO ASME Y14.5M-1994 F) DRAWING FILE NAME: M14AREV13 0.50 X 45 0.25 R0.10 R0.10 8 0 0.90 0.50 (1.04) SEATING PLANE DETAIL A SCALE: 20:1 Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1984 Fairchild Semiconductor Corporation MM74HCT74 Rev. 1.4.0 www.fairchildsemi.com 6 MM74HCT74 -- Dual D-Type Flip-Flop with Preset and Clear Physical Dimensions MM74HCT74 -- Dual D-Type Flip-Flop with Preset and Clear Physical Dimensions (Continued) Figure 2. 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1984 Fairchild Semiconductor Corporation MM74HCT74 Rev. 1.4.0 www.fairchildsemi.com 7 0.65 0.43 TYP 1.65 6.10 0.45 12.00 TOP & BOTTOM R0.09 min A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 1982 E. LANDPATTERN STANDARD: SOP65P640X110-14M F. DRAWING FILE NAME: MTC14REV6 1.00 R0.09min Figure 3. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1984 Fairchild Semiconductor Corporation MM74HCT74 Rev. 1.4.0 www.fairchildsemi.com 8 MM74HCT74 -- Dual D-Type Flip-Flop with Preset and Clear Physical Dimensions (Continued) 19.56 18.80 14 8 6.60 6.09 1 7 (1.74) 8.12 7.62 1.77 1.14 3.56 3.30 0.35 0.20 5.33 MAX 0.38 MIN 3.81 3.17 0.58 0.35 8.82 2.54 NOTES: UNLESS OTHERWISE SPECIFIED THIS PACKAGE CONFORMS TO A) JEDEC MS-001 VARIATION BA B) ALL DIMENSIONS ARE IN MILLIMETERS. DIMENSIONS ARE EXCLUSIVE OF BURRS, C) MOLD FLASH, AND TIE BAR EXTRUSIONS. D) DIMENSIONS AND TOLERANCES PER ASME Y14.5-1994 E) DRAWING FILE NAME: MKT-N14AREV7 Figure 4. 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c)1984 Fairchild Semiconductor Corporation MM74HCT74 Rev. 1.4.0 www.fairchildsemi.com 9 MM74HCT74 -- Dual D-Type Flip-Flop with Preset and Clear Physical Dimensions (Continued) ACEx(R) Build it NowTM CorePLUSTM CROSSVOLTTM CTLTM Current Transfer LogicTM EcoSPARK(R) EZSWITCHTM * TM PDP-SPMTM Power220(R) POWEREDGE(R) Power-SPMTM PowerTrench(R) Programmable Active DroopTM QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM SMART STARTTM SPM(R) STEALTHTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 FPSTM FRFET(R) Global Power ResourceSM Green FPSTM Green FPSTMe-SeriesTM GTOTM i-LoTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MillerDriveTM Motion-SPMTM OPTOLOGIC(R) OPTOPLANAR(R) (R) Fairchild(R) Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) FAST(R) FastvCoreTM FlashWriter(R) * (R) SupreMOSTM SyncFETTM (R) The Power Franchise(R) TinyBoostTM TinyBuckTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM * EZSWITCHTM and FlashWriter(R) are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I33 (c)1984 Fairchild Semiconductor Corporation MM74HCT74 Rev. 1.4.0 www.fairchildsemi.com 10 MM74HCT74 -- Dual D-Type Flip-Flop with Preset and Clear TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.