The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HD SERIES SOLDER TYPE D SUBMINIATURE CONNECTOR General H D Series subminiature connectors with stamped contacts are easy to solder to a wide variety of stranded and single conductor cables. 9, 15, 25, 37 and 50-contact models available. Features (1) Compact and sturdy due to metal shell. (2) Large solder cup enables use of wire up to 20 AWG. (3) Glass filled P.B.T. resin insulator offers excellent resistance to heat and chemicals. (4) Available in various plug cases such as CTF and CTH. A wide variety of combinations available, such as straight dipping (SD), right angle dipping (RD), crimping (CD), and ribbon IDC termination (FD). Application Computers, peripherals and terminals, control equipment, radio equipment, and measuring instruments. 51 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Electrical and Environmental Electrical and Environmental Characteristics Current capacity 3A Rated voltage 400V AC Insulation resistance 5000m min. at 500V DC Contact resistance 7m max. at 100mA DC Withstand voltage 1250Vrms AC for 1 minute Material and finish Shell Insulator Male Steel Nickel plating PBTGE Valox Black Coppor alloy Contact Selective Gold + Nickel Female Phosphor bronze Ordering Informations HD (1) 52 B B - 25 (2) (3) P F 05 (4) (5) (6) (7) (1) (2) (3) (4) (5) Model number symbol HD: D sub-soldering type Shell size: E, A, B, C and D Serial symbols by type of connector unit: Number of poles: 9, 15, 25, 37 and 50 Terminal opening shape symbol P: male terminal S: female terminal (6) F: shell dimple machined (7) Specification contents (05): Shell: Nickel plating Termination of contact: Nickel platinggold flash plating 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Solder Cup dimension: 1.1 Note 1: Soldering should be made within 4 seconds using a soldering iron of 40 W or less. Note 2: The figure shows a 25-contact model (HDBB-25P (05)) Unit: mm HDBB-25P05 HRS No No.of pin Part No. A B C D E F CL211-0232-6-05 CL211-0234-1-05 CL211-0215-7-05 9 15 25 HDEB-9P05 HDAB-15P05 HDBB-25P05 30.81 24.99 16.9 39.14 33.32 25.24 53.04 47.04 39.01 CL211-0236-7-05 CL211-0393-5-05 37 50 HDCB-37P05 HDDB-50P05 G 8.34 8.34 8.4 1.2 1.2 1.3 5.99 5.99 5.87 12.55 12.55 12.55 YES RoHS 69.32 63.5 55.47 8.4 66.93 61.11 52.85 11.13 1.4 1.5 5.87 5.87 12.55 15.37 Solder Cup dimension: 1.1 Note 1: Soldering should be made within 4 seconds using a soldering iron of 40 W or less. Note 2: The figure shows a 25-contact model (HDBB-25PF (05)) HDBB-25PF05 Unit: mm HRS No No.of pin Part No. A B C CL211-0566-1-05 CL211-0563-3-05 9 15 HDEB-9PF05 HDAB-15PF05 30.81 24.99 16.9 39.14 33.32 25.24 CL211-0564-6-05 CL211-0567-4-05 25 37 HDBB-25PF05 HDCB-37PF05 53.04 47.04 39.01 69.32 63.5 55.47 D E F 8.34 1.2 5.99 8.4 1.3 1.4 5.87 G RoHS 12.55 YES 53 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Solder Cup dimension: 1.1 Note 1: Soldering should be made within 4 seconds using a soldering iron of 40 W or less. Note 2: The figure shows a 25-contact model (HDBB-25S (05)) Unit: mm HDBB-25S05 HRS No No.of pin Part No. A CL211-0233-9-05 CL211-0235-4-05 CL211-0216-0-05 9 15 25 HDEB-9S05 HDAB-15S05 HDBB-25S05 CL211-0237-0-05 CL211-0394-8-05 37 50 HDCB-37S05 HDDB-50S05 B C D E F G RoHS 30.81 24.99 16.4 39.14 33.32 24.59 53.04 47.04 38.3 1.2 1.2 1.2 7.82 7.82 7.82 12.55 12.55 12.55 6.17 6.17 6.17 YES 69.32 63.5 54.76 66.93 61.11 52.35 1.2 1.2 7.82 12.55 10.63 15.37 6.17 6.17 Mounting Cutout Unit: mm 54 Shell Size a b c E 24.99 20.2 11.5 A 33.32 28.6 11.5 B 47.04 42.3 11.5 C 63.5 58.7 11.5 D 61.11 56 14.3 04/2009