51
HD SERIES SOLDER TYPE D SUBMINIATURE CONNECTOR
H D Series subminiature connectors with stamped contacts are easy to solder to a wide variety of stranded and
single conductor cables. 9, 15, 25, 37 and 50-contact models available.
General
Computers, peripherals and terminals, control equipment, radio equipment, and measuring instruments.
Application
(1) Compact and sturdy due to metal shell.
(2) Large solder cup enables use of wire up to 20
AWG.
(3) Glass filled P.B.T. resin insulator offers excellent
resistance to heat and chemicals.
(4) Available in various plug cases such as CTF and
CTH. A wide variety of combinations available,
such as straight dipping (SD), right angle dipping
(RD), crimping (CD), and ribbon IDC termination
(FD).
Features
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
52
Electrical and Environmental
Ordering Informations
HDBB−25PF （05）
(1) (2) (3) (4) (5) (6) (7)
(1) Model number symbol HD: D sub-soldering type
(2) Shell size: E, A, B, C and D
(3) Serial symbols by type of connector unit:
(4) Number of poles: 9, 15, 25, 37 and 50
(5) Terminal opening shape symbol
P: male terminal
S: female terminal
(6) F: shell dimple machined
(7) Specification contents
(05): Shell: Nickel plating
Termination of contact: Nickel plating＋gold flash
plating
ElectricalandEnvironmentalCharacteristics
Currentcapacity 3A
Ratedvoltage 400VAC
Insulation
resistance
5000mΩ min.
at500VDC
Contact
resistance
7mΩ max.
at100mADC
Withstand
voltage 1250VrmsACfor 1minute
Materialandfinish
Shell Steel Nickelplating
Black
SelectiveGold+Nickel
PBT（GEValox）
Male
Phosphorbronze
Copporalloy
Female
Insulator
Contact
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
53
HRSNo
No.ofpin
PartNo. A B C D E F G RoHS
CL211-0232-6-05
CL211-0234-1-05
CL211-0215-7-05
CL211-0236-7-05
CL211-0393-5-05
9
15
25
37
50
HDEB-9P（05）
HDAB-15P（05）
HDBB-25P（05）
HDCB-37P（05）
HDDB-50P（05）
30.81
39.14
53.04
69.32
66.93
24.99 16.9 8.34 1.2 5.99 12.55
YES
33.32 25.24 8.34 1.2 5.99 12.55
47.04 39.01 8.4 1.3 5.87 12.55
63.5 55.47 8.4 1.4 5.87 12.55
61.11 52.85 11.13 1.5 5.87 15.37
Unit:mm
HDBB-25P（05）
Note 1: Soldering should be made within 4 seconds using
a soldering iron of 40 W or less.
Note 2: The figure shows a 25-contact model (HDBB-25P
(05))
HRSNo
No.ofpin
PartNo. A B C D E F G RoHS
CL211-0566-1-05
CL211-0563-3-05
CL211-0564-6-05
CL211-0567-4-05
9
15
25
37
HDEB-9PF（05）
HDAB-15PF（05）
HDBB-25PF（05）
HDCB-37PF（05）
30.81
39.14
53.04
69.32
24.99 16.9 8.34 1.2 5.99
12.55 YES
33.32 25.24
47.04 39.01 8.4 1.3 5.87
63.5 55.47 1.4
Unit:mm
HDBB-25PF（05）
Note 1: Soldering should be made within 4 seconds using
a soldering iron of 40 W or less.
Note 2: The figure shows a 25-contact model (HDBB-25PF
(05))
SolderCupdimension:φ1.1
SolderCupdimension:φ1.1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009
54
Mounting Cutout
HDBB-25S（05）
HRSNo
No.ofpin
PartNo. A B C D E F G RoHS
CL211-0233-9-05
CL211-0235-4-05
CL211-0216-0-05
CL211-0237-0-05
CL211-0394-8-05
9
15
25
37
50
HDEB-9S（05）
HDAB-15S（05）
HDBB-25S（05）
HDCB-37S（05）
HDDB-50S（05）
30.81
39.14
53.04
69.32
66.93
24.99 16.4 1.2 7.82 12.55 6.17
YES
33.32 24.59 1.2 7.82 12.55 6.17
47.04 38.3 1.2 7.82 12.55 6.17
63.5 54.76 1.2 7.82 12.55 6.17
61.11 52.35 1.2 10.63 15.37 6.17
Unit:mm
Note 1: Soldering should be made within 4 seconds using
a soldering iron of 40 W or less.
Note 2: The figure shows a 25-contact model (HDBB-25S
(05))
ShellSize a b c
E24.99 20.2 11.5
A
B
C
D
33.32
47.04
63.5
61.11
28.6
42.3
58.7
56
11.5
11.5
11.5
14.3
Unit:mm
SolderCupdimension:φ1.1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
04/2009