PD-90396H POWER MOSFET THRU-HOLE (MO-036AB) IRFG110 JANTX2N7334 JANTXV2N7334 REF:MIL-PRF-19500/597 100V, QUAD N-CHANNEL (R) HEXFET MOSFET TECHNOLOGY Product Summary Part Number RDS(on) ID IRFG110 0.7 1.0A HEXFET(R) MOSFET technology is the key to International Rectifier's advanced line of power MOSFET transistors. The efficient geometry design achieves very low on-state resistance combined with high transconductance. HEXFET transistors also feature all of the well-established advantages of MOSFETs, such as voltage control, very fast switching, ease of paralleling and electrical parameter temperature stability. They are well-suited for applications such as switching power supplies, motor controls, inverters, choppers, audio amplifiers, high energy pulse circuits, and virtually any application where high reliability is required. The HEXFET transistor's totally isolated package eliminates the need for additional isolating material between the device and the heatsink. This improves thermal efficiency and reduces drain capacitance. MO-036AB Features: n n n n n n Simple Drive Requirements Ease of Paralleling Hermetically Sealed Electrically Isolated Dynamic dv/dt Rating Light-weight Absolute Maximum Ratings Parameter ID @ VGS = 10V, TC = 25C ID @ VGS = 10V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current A Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy A Avalanche Current A Repetitive Avalanche Energy A Peak Diode Recovery dv/dt A Operating Junction Storage Temperature Range Lead Temperature Weight Units 1.0 0.6 4.0 1.4 0.011 20 75 1.0 0.14 5.5 -55 to 150 300 (0.63 in./1.6 mm from case for 10s) 1.3 (Typical) A W W/C V mJ A mJ V/ns C g For footnotes refer to the last page www.irf.com 1 03/01/10 IRFG110 Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified) BVDSS Parameter Min Drain-to-Source Breakdown Voltage 100 Typ Max Units BV DSS /T J Temperature Coefficient of Breakdown -- Voltage RDS(on) Static Drain-to-Source On-State -- Resistance -- VGS(th) Gate Threshold Voltage 2.0 g fs Forward Transconductance 0.86 IDSS Zero Gate Voltage Drain Current -- -- -- -- V 0.13 -- V/C -- -- -- -- -- -- 0.7 0.8 4.0 -- 25 250 IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 10 100 -100 15 7.5 7.5 20 25 40 40 -- Ciss C oss C rss Input Capacitance Output Capacitance Reverse Transfer Capacitance -- -- -- 180 82 15 -- -- -- V S A nA nC Test Conditions VGS = 0V, ID = 1.0mA Reference to 25C, ID = 1.0mA VGS = 10V, ID = 0.6A A VGS = 10V, ID = 1.0A VDS = VGS, ID = 250A VDS > 15V, IDS = 0.6A A VDS= 80V ,VGS=0V VDS = 80V, VGS = 0V, TJ = 125C VGS = 20V VGS = -20V VGS =10V, ID = 1.0A VDS = 50V VDD = 50V, ID = 1.0A, VGS =10V, RG = 7.5 ns nH pF Measured from drain lead (6mm/ 0.25in. from package) to source lead (6mm/0.25in. from package) VGS = 0V, VDS = 25V f = 1.0MHz Source-Drain Diode Ratings and Characteristics Parameter Min Typ Max Units IS ISM VSD trr Q RR Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) A Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge ton Forward Turn-On Time -- -- -- -- -- -- -- -- -- -- 1.0 4.0 1.5 200 0.83 Test Conditions A V ns C Tj = 25C, IS = 1.0A, VGS = 0V A Tj = 25C, IF = 1.0A, di/dt 100A/s VDD 30V A Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD. Thermal Resistance Parameter RthJC RthJA Junction-to-Case Junction-to-Ambient Min Typ Max -- -- -- -- 17 90 Units C/W Test Conditions Typical socket mount Note: Corresponding Spice and Saber models are available on International Rectifier Website. For footnotes refer to the last page 2 www.irf.com IRFG110 Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics Fig 3. Typical Transfer Characteristics Fig 4. Normalized On-Resistance Vs. Temperature www.irf.com 3 IRFG110 13a & b Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage ID, Drain-to-Source Current (A) 10 OPERATION IN THIS AREA LIMITED BY R DS(on) 1ms 1 10ms 0.1 0.01 Tc = 25C Tj = 150C Single Pulse 0.1 1 DC 10 100 1000 VDS , Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage 4 Fig 8. Maximum Safe Operating Area www.irf.com IRFG110 V DS VGS RG RD D.U.T. + -V DD VGS Pulse Width 1 s Duty Factor 0.1 % Fig 10a. Switching Time Test Circuit VDS 90% Fig 9. Maximum Drain Current Vs. Case Temperature 10% VGS td(on) tr t d(off) tf Fig 10b. Switching Time Waveforms Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient www.irf.com 5 IRFG110 15V L VDS D.U.T. RG VGS 20V IAS DRIVER + - VDD A 0.01 tp Fig 12a. Unclamped Inductive Test Circuit V(BR)DSS tp Fig 12c. Maximum Avalanche Energy Vs. Drain Current I AS Current Regulator Same Type as D.U.T. Fig 12b. Unclamped Inductive Waveforms 50K QG 12V 10 .2F .3F 10 V QGS QGD + V - DS VGS VG 3mA Charge Fig 13a. Basic Gate Charge Waveform 6 D.U.T. IG ID Current Sampling Resistors Fig 13b. Gate Charge Test Circuit www.irf.com IRFG110 Footnotes: A Repetitive Rating; Pulse width limited by maximum junction temperature. A VDD = 25V, starting TJ = 25C, L= 150mH Peak IL = 1.0A, VGS = 10V A ISD 1.0A, di/dt 75A/s, VDD 100V, TJ 150C A Pulse width 300 s; Duty Cycle 2% Case Outline and Dimensions -- MO-036AB G4 G1 G3 G4 G3 G1 G2 G2 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 03/2010 www.irf.com 7